A new "option spop-check" statement has been added to enable server health
checks based on SPOP HELLO handshake. SPOP is the protocol used by SPOE filters
to talk to servers.
It does the opposite of 'set-var' action/converter. It is really useful for
per-process variables. But, it can be used for any scope.
The lua function 'unset_var' has also been added.
This function, unsurprisingly, sets a variable value only if it already
exists. In other words, this function will succeed only if the variable was
found somewhere in the configuration during HAProxy startup.
It will be used by SPOE filter. So an agent will be able to set a value only for
existing variables. This prevents an agent to create a very large number of
unused variables to flood HAProxy and exhaust the memory reserved to variables..
This code has been moved from haproxy.c to sample.c and the function
release_sample_expr can now be called from anywhere to release a sample
expression. This function will be used by the stream processing offload engine
(SPOE).
This new setting supports a comma-delimited list of methods used to
resolve the server's FQDN to an IP address. Currently supported methods
are "libc" (use the regular libc's resolver) and "last" (use the last
known valid address found in the state file).
The list is implemented in a 32-bit integer, because each init-addr
method only requires 3 bits. The last one must always be SRV_IADDR_END
(0), allowing to store up to 10 methods in a single 32 bit integer.
Note: the doc is provided at the end of this series.
It will be important to help debugging some DNS resolution issues to
know why a server was marked down, so let's make the function support
a 3rd argument with an indication of the reason. Passing NULL will keep
the message as-is.
Server addresses are not resolved anymore upon the first pass so that we
don't fail if an address cannot be resolved by the libc. Instead they are
processed all at once after the configuration is fully loaded, by the new
function srv_init_addr(). This function only acts on the server's address
if this address uses an FQDN, which appears in server->hostname.
For now the function does two things, to followup with HAProxy's historical
default behavior:
1. apply server IP address found in server-state file if runtime DNS
resolution is enabled for this server
2. use the DNS resolver provided by the libc
If none of the 2 options above can find an IP address, then an error is
returned.
All of this will be needed to support the new server parameter "init-addr".
For now, the biggest user-visible change is that all server resolution errors
are dumped at once instead of causing a startup failure one by one.
In the last release a lot of the structures have become opaque for an
end user. This means the code using these needs to be changed to use the
proper functions to interact with these structures instead of trying to
manipulate them directly.
This does not fix any deprecations yet that are part of 1.1.0, it only
ensures that it can be compiled against that version and is still
compatible with older ones.
[wt: openssl-0.9.8 doesn't build with it, there are conflicts on certain
function prototypes which we declare as inline here and which are
defined differently there. But openssl-0.9.8 is not supported anymore
so probably it's OK to go without it for now and we'll see later if
some users still need it. Emeric has reviewed this change and didn't
spot anything obvious which requires special care. Let's try it for
real now]
The only reason wurfl/wurfl.h was needed outside of wurfl.c was to expose
wurfl_handle which is a pointer to a structure, referenced by global.h.
By just storing a void* there instead, we can confine all wurfl code to
wurfl.c, which is really nice.
Right now there is an issue with the way the maintenance flags are
propagated upon startup. They are not propagate, just copied from the
tracked server. This implies that depending on the server's order, some
tracking servers may not be marked down. For example this configuration
does not work as expected :
server s1 1.1.1.1:8000 track s2
server s2 1.1.1.1:8000 track s3
server s3 1.1.1.1:8000 track s4
server s4 wtap:8000 check inter 1s disabled
It results in s1/s2 being up, and s3/s4 being down, while all of them
should be down.
The only clean way to process this is to run through all "root" servers
(those not tracking any other server), and to propagate their state down
to all their trackers. This is the same algorithm used to propagate the
state changes. It has to be done both to compute the IDRAIN flag and the
IMAINT flag. However, doing so requires that tracking servers are not
marked as inherited maintenance anymore while parsing the configuration
(and given that it is wrong, better drop it).
This fix also addresses another side effect of the bug above which is
that the IDRAIN/IMAINT flags are stored in the state files, and if
restored while the tracked server doesn't have the equivalent flag,
the servers may end up in a situation where it's impossible to remove
these flags. For example in the configuration above, after removing
"disabled" on server s4, the other servers would have remained down,
and not anymore with this fix. Similarly, the combination of IMAINT
or IDRAIN with their respective forced modes was not accepted on
reload, which is wrong as well.
This bug has been present at least since 1.5, maybe even 1.4 (it came
with tracking support). The fix needs to be backported there, though
the srv-state parts are irrelevant.
This commit relies on previous patch to silence warnings on startup.
We used to have 7 different character classes, each was 256 bytes long,
resulting in almost 2kB being used in the L1 cache. It's as cheap to
test a bit than to check the byte is not null, so let's store a 7-bit
composite value and check for the respective bits there instead.
The executable is now 4 kB smaller and the performance on small
objects increased by about 1% to 222k requests/second with a config
involving 4 http-request rules including 1 header lookup, one header
replacement, and 2 variable assignments.
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
This is in order to make integration of tcp-request-session cleaner :
- tcp_exec_req_rules() was renamed tcp_exec_l4_rules()
- LI_O_TCP_RULES was renamed LI_O_TCP_L4_RULES
(LI_O_*'s horrible indent was also fixed and a provision was left
for L5 rules).
These are denied conns. Strangely this wasn't emitted while it used to be
available for a while. It corresponds to the number of connections blocked
by "tcp-request connection reject".
To register a new cli keyword, you need to declare a cli_kw_list
structure in your source file:
static struct cli_kw_list cli_kws = {{ },{
{ { "test", "list", NULL }, "test list : do some tests on the cli", test_parsing, NULL },
{ { NULL }, NULL, NULL, NULL, NULL }
}};
And then register it:
cli_register_kw(&cli_kws);
The first field is an array of 5 elements, where you declare the
keywords combination which will match, it must be ended by a NULL
element.
The second field is used as a usage message, it will appear in the help
of the cli, you can set it to NULL if you don't want to show it, it's a
good idea if you want to overwrite some existing keywords.
The two last fields are callbacks.
The first one is used at parsing time, you can use it to parse the
arguments of your keywords and print small messages. The function must
return 1 in case of a failure, otherwise 0:
#include <proto/dumpstats.h>
static int test_parsing(char **args, struct appctx *appctx)
{
struct chunk out;
if (!*args[2]) {
appctx->ctx.cli.msg = "Error: the 3rd argument is mandatory !";
appctx->st0 = STAT_CLI_PRINT;
return 1;
}
chunk_reset(&trash);
chunk_printf(&trash, "arg[3]: %s\n", args[2]);
chunk_init(&out, NULL, 0);
chunk_dup(&out, &trash);
appctx->ctx.cli.err = out.str;
appctx->st0 = STAT_CLI_PRINT_FREE; /* print and free in the default cli_io_handler */
return 0;
}
The last field is the IO handler callback, it can be set to NULL if you
want to use the default cli_io_handler() otherwise you can write your
own. You can use the private pointer in the appctx if you need to store
a context or some data. stats_dump_sess_to_buffer() is a good example of
IO handler, IO handlers often use the appctx->st2 variable for the state
machine. The handler must return 0 in case it have to be recall later
otherwise 1.
During the stick-table teaching process which occurs at reloading/restart time,
expiration dates of stick-tables entries were not synchronized between peers.
This patch adds two new stick-table messages to provide such a synchronization feature.
As these new messages are not supported by older haproxy peers protocol versions,
this patch increments peers protol version, from 2.0 to 2.1, to help in detecting/supporting
such older peers protocol implementations so that new versions might still be able
to transparently communicate with a newer one.
[wt: technically speaking it would be nice to have this backported into 1.6
as some people who reload often are affected by this design limitation, but
it's not a totally transparent change that may make certain users feel
reluctant to upgrade older versions. Let's let it cook in 1.7 first and
decide later]
New DNS response parser function which turn the DNS response from a
network buffer into a DNS structure, much easier for later analysis
by upper layer.
Memory is pre-allocated at start-up in a chunk dedicated to DNS
response store.
New error code to report a wrong number of queries in a DNS response.
This function can replace update_server_addr() where the need to change the
server's port as well as the IP address is required.
It performs some validation before performing each type of change.
HAProxy used to deduce port used for health checks when parsing configuration
at startup time.
Because of this way of working, it makes it complicated to change the port at
run time.
The current patch changes this behavior and makes HAProxy to choose the
port used for health checking when preparing the check task itself.
A new type of error is introduced and reported when no port can be found.
There won't be any impact on performance, since the process to find out the
port value is made of a few 'if' statements.
This patch also introduces a new check state CHK_ST_PORT_MISS: this flag is
used to report an error in the case when HAProxy needs to establish a TCP
connection to a server, to perform a health check but no TCP ports can be
found for it.
And last, it also introduces a new stream termination condition:
SF_ERR_CHK_PORT. Purpose of this flag is to report an error in the event when
HAProxy has to run a health check but no port can be found to perform it.
At some places, smp_dup() is inappropriately called to ensure a modification
is possible while in fact we only need to ensure the sample may be modified
in place. Let's provide smp_is_rw() to check for this capability and
smp_make_rw() to perform the smp_dup() when it is not the case.
Note that smp_is_rw() will also try to add the trailing zero on strings when
needed if possible, to avoid a useless duplication.
These functions ensure that the designated sample is "safe for use",
which means that its size is known, its length is correct regarding its
size, and that strings are properly zero-terminated.
smp_is_safe() only checks (and optionally sets the trailing zero when
needed and possible). smp_make_safe() will call smp_dup() after
smp_is_safe() fails.
This enables tracking of sticky counters from current response. The only
difference from "http-request track-sc" is the <key> sample expression
can only make use of samples in response (eg. res.*, status etc.) and
samples below Layer 6.
When NetScaler application switch is used as L3+ switch, informations
regarding the original IP and TCP headers are lost as a new TCP
connection is created between the NetScaler and the backend server.
NetScaler provides a feature to insert in the TCP data the original data
that can then be consumed by the backend server.
Specifications and documentations from NetScaler:
https://support.citrix.com/article/CTX205670https://www.citrix.com/blogs/2016/04/25/how-to-enable-client-ip-in-tcpip-option-of-netscaler/
When CIP is enabled on the NetScaler, then a TCP packet is inserted just after
the TCP handshake. This is composed as:
- CIP magic number : 4 bytes
Both sender and receiver have to agree on a magic number so that
they both handle the incoming data as a NetScaler Client IP insertion
packet.
- Header length : 4 bytes
Defines the length on the remaining data.
- IP header : >= 20 bytes if IPv4, 40 bytes if IPv6
Contains the header of the last IP packet sent by the client during TCP
handshake.
- TCP header : >= 20 bytes
Contains the header of the last TCP packet sent by the client during TCP
handshake.
When compiled with GCC 6, the IP address specified for a frontend was
ignored and HAProxy was listening on all addresses instead. This is
caused by an incomplete copy of a "struct sockaddr_storage".
With the GNU Libc, "struct sockaddr_storage" is defined as this:
struct sockaddr_storage
{
sa_family_t ss_family;
unsigned long int __ss_align;
char __ss_padding[(128 - (2 * sizeof (unsigned long int)))];
};
Doing an aggregate copy (ss1 = ss2) is different than using memcpy():
only members of the aggregate have to be copied. Notably, padding can be
or not be copied. In GCC 6, some optimizations use this fact and if a
"struct sockaddr_storage" contains a "struct sockaddr_in", the port and
the address are part of the padding (between sa_family and __ss_align)
and can be not copied over.
Therefore, we replace any aggregate copy by a memcpy(). There is another
place using the same pattern. We also fix a function receiving a "struct
sockaddr_storage" by copy instead of by reference. Since it only needs a
read-only copy, the function is converted to request a reference.
'channel_analyze' callback has been removed. Now, there are 2 callbacks to
surround calls to analyzers:
* channel_pre_analyze: Called BEFORE all filterable analyzers. it can be
called many times for the same analyzer, once at each loop until the
analyzer finishes its processing. This callback is resumable, it returns a
negative value if an error occurs, 0 if it needs to wait, any other value
otherwise.
* channel_post_analyze: Called AFTER all filterable analyzers. Here, AFTER
means when an analyzer finishes its processing. This callback is NOT
resumable, it returns a negative value if an error occurs, any other value
otherwise.
Pre and post analyzer callbacks are not automatically called. 'pre_analyzers'
and 'post_analyzers' bit fields in the filter structure must be set to the right
value using AN_* flags (see include/types/channel.h).
The flag AN_RES_ALL has been added (AN_REQ_ALL already exists) to ease the life
of filter developers. AN_REQ_ALL and AN_RES_ALL include all filterable
analyzers.
Now, to call an analyzer in 'process_stream' function, we should use
FLT_ANALAYZE or ANALYZE macros, depending if this is a filterable analyzer or
not.
In 1.4-dev3, commit 31971e5 ("[MEDIUM] add support for infinite forwarding")
made it possible to configure the lower layer to forward data indefinitely
by setting the forward size to CHN_INFINITE_FORWARD (4GB-1). By then larger
chunk sizes were not supported so there was no confusion in the usage of the
function.
Since 1.5 we support 64-bit content-lengths and chunk sizes and the function
has grown to support 64-bit arguments, though it still limits a single pass
to 32-bit quantities (what fit in the channel's to_forward field). The issue
now becomes that a 4GB-1 content-length can be confused with infinite
forwarding (in fact it's 4GB-1+what was already in the buffer). It causes a
visible effect when transferring this exact size because the transfer rate
is lower than with other sizes due in part to the disabling of the Nagle
algorithm on the sendto() call.
In theory with keep-alive it should prevent a second request from being
processed after such a transfer, but since the analysers are still present,
the forwarding analyser properly counts down the remaining size to transfer
and ultimately the transaction gets correctly reset so there is no visible
effect.
Since the root cause of the issue is an API problem (lack of distinction
between a real valid length and a magic value), this patch modifies the API
to have a new dedicated function called channel_forward_forever() to program
a permanent forwarding. The existing function __channel_forward() was modified
to properly take care of the requested sizes and ensure it 1) never overflows
and 2) never reaches CHN_INFINITE_FORWARD by accident.
It is worth noting that the function used to have a bug causing a 2GB
forward to be scheduled if it was called with less data than what is present
in buf->i. Fortunately this bug couldn't be triggered with existing code.
This fix should be backported to 1.6 and 1.5. While it also theorically
affects 1.4, it's better not to backport it there, as the risk of breaking
large object transfers due to significant API differences is high, compared
to the fact that the largest supported objects (4GB-1) are just slower to
transfer.
Unfortunately, commit 169c470 ("BUG/MEDIUM: channel: fix miscalculation of
available buffer space (3rd try)") was still not enough to completely
address the issue. It fell into an integer comparison trap. Contrary to
expectations, chn->to_forward may also have the sign bit set when
forwarding regular data having a large content-length, resulting in
an incomplete check of the result and of the reserve because the with
to_forward very large, to_forward+o could become very small and also
the reserve could become positive again and make channel_recv_limit()
return a negative value.
One way to reproduce this situation is to transfer a large file (> 2GB)
with http-keep-alive or http-server-close, without splicing, and ensure
that the server uses content-length instead of chunks. The transfer
should stall very early after the first buffer has been transferred
to the client.
This fix now properly checks 1) for an overflow caused by summing o and
to_forward, and 2) for o+to_forward being smaller or larger than maxrw
before performing the subtract, so that all sensitive operations are
properly performed on 33-bit arithmetics.
The code was subjected again to a series of tests using inject+httpterm
scanning a wide range of object sizes (+10MB after each new request) :
$ printf "new page 1\nget 127.0.0.1:8002 / s=%%s0m\n" | \
inject64 -o 1 -u 1 -f /dev/stdin
With previous fix, the transfer would suddenly stop when reaching 2GB :
hits ^hits hits/s ^h/s bytes kB/s last errs tout htime sdht ptime
203 1 2 1 216816173354 2710202 3144892 0 0 685.0 0.0 685.0
205 2 2 2 219257283186 2706880 2441109 0 0 679.5 6.5 679.5
205 0 2 0 219257283186 2673836 0 0 0 0.0 0.0 0.0
205 0 2 0 219257283186 2641622 0 0 0 0.0 0.0 0.0
205 0 2 0 219257283186 2610174 0 0 0 0.0 0.0 0.0
Now it's fine even past 4 GB.
Many thanks to Vedran Furac for reporting this issue early with a common
access pattern helping to troubleshoot this.
This fix must be backported to 1.6 and 1.5 where the commit above was
already backported.
This function returns non-zero if the channel is congested with data in
transit waiting for leaving, indicating to the caller that it should wait
for the reserve to be released before starting to process new data in
case it needs the ability to append data. This is meant to be used while
waiting for a clean response buffer before processing a request.
This is very useful in complex architecture systems where HAproxy
is balancing DB connections for example. We want to keep the maxconn
high in order to avoid issues with queueing on the LB level when
there is slowness on another part of the system. Example is a case of
an architecture where each thread opens multiple DB connections, which
if get stuck in queue cause a snowball effect (old connections aren't
closed, new ones cannot be established). These connections are mostly
idle and the DB server has no problem handling thousands of them.
Allowing us to dynamically set maxconn depending on the backend usage
(LA, CPU, memory, etc.) enables us to have high maxconn for situations
like above, but lowering it in case there are real issues where the
backend servers become overloaded (cache issues, DB gets hit hard).
Latest fix 8a32106 ("BUG/MEDIUM: channel: fix miscalculation of available
buffer space (2nd try)") did happen to fix some observable issues but not
all of them in fact, some corner cases still remained and at least one user
reported a busy loop that appeared possible, though not easily reproducible
under experimental conditions.
The remaining issue is that we still consider min(i, to_fwd) as the number
of bytes in transit, but in fact <i> is not relevant here. Indeed, what
matters is that we can read everything we want at once provided that at
the end, <i> cannot be larger than <size-maxrw> (if it was not already).
This is visible in two cases :
- let's have i=o=max/2 and to_fwd=0. Then i+o >= max indicates that the
buffer is already full, while it is not since once <o> is forwarded,
some space remains.
- when to_fwd is much larger than i, it's obvious that we can fill the
buffer.
The only relevant part in fact is o + to_fwd. to_fwd will ensure that at
least this many bytes will be moved from <i> to <o> hence will leave the
buffer, whatever the number of rounds it takes.
Interestingly, the fix applied here ensures that channel_recv_max() will
now equal (size - maxrw - i + to_fwd), which is indeed what remains
available below maxrw after to_fwd bytes are forwarded from i to o and
leave the buffer.
Additionally, the latest fix made it possible to meet an integer overflow
that was not caught by the range test when forwarding in TCP or tunnel
mode due to to_forward being added to an existing value, causing the
buffer size to be limited when it should not have been, resulting in 2
to 3 recv() calls when a single one was enough. The first one was limited
to the unreserved buffer size, the second one to the size of the reserve
minus 1, and the last one to the last byte. Eg with a 2kB buffer :
recvfrom(22, "HTTP/1.1 200\r\nConnection: close\r"..., 1024, 0, NULL, NULL) = 1024
recvfrom(22, "23456789.123456789.123456789.123"..., 1023, 0, NULL, NULL) = 1023
recvfrom(22, "5", 1, 0, NULL, NULL) = 1
This bug is still present in 1.6 and 1.5 so the fix should be backported
there.
The condition to poll for receive as implemented in channel_may_recv()
is still incorrect. If buf->o is null and buf->i is slightly larger than
chn->to_forward and at least as large as buf->size - maxrewrite, then
reading will be disabled. It may slightly delay some data delivery by
having first to forward pending bytes, but may also cause some random
issues with analysers that wait for some data before starting to forward
what they correctly parsed. For instance, a body analyser may be prevented
from seeing the data that only fits in the reserve.
This bug may also prevent an applet's chk_rcv() function from being called
when part of a buffer is released. It is possible (though not verified)
that this participated to some peers frozen session issues some people
have been facing.
This fix should be backported to 1.6 and 1.5 to ensure better coherency
with channel_recv_limit().
Commit 9c06ee4 ("BUG/MEDIUM: channel: don't schedule data in transit for
leaving until connected") took care of an issue involving POST in conjunction
with http-send-name-header, where we absolutely never want to touch the
reserve until we're sure not to touch the buffer contents anymore, which
is indicated by the output stream-interface being connected.
But channel_may_recv() was not equipped with such a test, so in some
situations it might decide that it is possible to poll for reads, and
later channel_recv_limit() will decide it's not possible to read,
causing a loop. So we must add a similar test there.
Since the fix above was backported to 1.6 and 1.5, this fix must as well.
There's quite some inconsistency in the internal API. listener_accept()
which is the main accept() function returns void but is declared as int
in the include file. It's assigned to proto->accept() for all stream
protocols where an int is expected but the result is never checked (nor
is it documented by the way). This proto->accept() is in turn assigned
to fd->iocb() which is supposed to return an int composed of FD_WAIT_*
flags, but which is never checked either.
So let's fix all this mess :
- nobody checks accept()'s return
- nobody checks iocb()'s return
- nobody sets a return value
=> let's mark all these functions void and keep the current ones intact.
Additionally we now include listener.h from listener.c to ensure we won't
silently hide this incoherency in the future.
Note that this patch could/should be backported to 1.6 and even 1.5 to
simplify debugging sessions.
Commit 999f643 ("BUG/MEDIUM: channel: fix miscalculation of available buffer
space.") introduced a bug which made output data to be ignored when computing
the remaining room in a buffer. The problem is that channel_may_recv()
properly considers them and may declare that the FD may be polled for read
events, but once the even strikes, channel_recv_limit() called before recv()
says the opposite. In 1.6 and later this case is automatically caught by
polling loop detection at the connection level and is harmless. But the
backport in 1.5 ends up with a busy polling loop as soon as it becomes
possible to have a buffer with this conflict. In order to reproduce it, it
is necessary to have less than [maxrewrite] bytes available in a buffer, no
forwarding enabled (end of transfer) and [buf->o >= maxrewrite - free space].
Since this heavily depends on socket buffers, it will randomly strike users.
On 1.5 with 8kB buffers it was possible to reproduce it with httpterm using
the following command line :
$ (printf "GET /?s=675000 HTTP/1.0\r\n\r\n"; sleep 60) | \
nc6 --rcvbuf-size 1 --send-only 127.0.0.1 8002
This bug is only medium in 1.6 and later but is major in the 1.5 backport,
so it must be backported there.
Thanks to Nenad Merdanovic and Janusz Dziemidowicz for reporting this issue
with enough elements to help understand it.
This patch splits the function stats_dump_be_stats() in two parts. The
part is called stats_fill_be_stats(), and just fill the stats buffer.
This split allows the usage of preformated stats in other parts of HAProxy
like the Lua.
This patch splits the function stats_dump_sv_stats() in two parts. The
extracted part is called stats_fill_sv_stats(), and just fill the stats buffer.
This split allows the usage of preformated stats in other parts of HAProxy
like the Lua.
This patch splits the function stats_dump_li_stats() in two parts. The
extracted part is called stats_fill_li_stats(), and just fill the stats buffer.
This split allows the usage of preformated stats in other parts of HAProxy
like the Lua.
This patch splits the function stats_dump_fe_stats() in two parts. The
extracted part is called stats_fill_fe_stats(), and just fill the stats buffer.
This split allows the usage of preformated stats in other parts of HAProxy
like the Lua.
This patch splits the function stats_dump_info_to_buffer() in two parts. The
extracted part is called stats_fill_info(), and just fill the stats buffer.
This split allows the usage of preformated stats in other parts of HAProxy
like the Lua.
This patch adds a Lua post initialisation wrapper. It already exists for
pure Lua function, now it executes also C. It is useful for doing things
when the configuration is ready to use. For example we can can browse and
register all the proxies.
All the HAProxy Lua object are declared with the same pattern:
- Add the function __tosting which dumps the object name
- Register the name in the Lua REGISTRY
- Register the reference ID
These action are refactored in on function. This remove some
lines of code.
The functions
- hlua_class_const_int()
- hlua_class_const_str()
- hlua_class_function()
are use for common class registration actions.
The function 'hlua_dump_object()' is generic dump name function.
These functions can be used by all the HAProxy objects, so I move
it into the safe functions file.
This emits the field positions, names and types. It is more convenient
than the default output for a parser that doesn't know all the fields. It
simply relies on stats_emit_typed_data_field() and stats_emit_field_tags()
added by previous patch for the output. A new stats format flag was added,
STAT_FMT_TYPED, which is set when the "typed" keyword is specified on the
CLI.
New function stats_emit_typed_data_field() does exactly like
stats_emit_raw_data_field() except that it also prints the data
type after a colon. This will be used to print using the typed
format.
And function stats_emit_field_tags() appends a 3-letter code
describing the origin, nature, and scope, followed by an optional
delimiter. This will be particularly convenient to dump typed
data.
We're preparing for various data types for each stats field as they
appear in the CSV output. For now we only cover the regular types handled
by printf, so we have 32 and 64 bit ints and counters, strings, and of
course "empty" to indicate that there's nothing in the field and which
guarantees that any accessed entry will return 0.
More types will surely come later so that some fields are properly
represented. For example, we could see limits where only the value 0
doesn't show up, or human time, etc.
This is the continuation of previous patch called "BUG/MAJOR: samples:
check smp->strm before using it".
It happens that variables may have a session-wide scope, and that their
session is retrieved by dereferencing the stream. But nothing prevents them
from being used from a streamless context such as tcp-request connection,
thus crashing the process. Example :
tcp-request connection accept if { src,set-var(sess.foo) -m found }
In order to fix this, we have to always ensure that variable manipulation
only happens via the sample, which contains the correct owner and context,
and that we never use one from a different source. This results in quite a
large change since a lot of functions are inderctly involved in the call
chain, but the change is easy to follow.
This fix must be backported to 1.6, and requires the last two patches.
Since commit 6879ad3 ("MEDIUM: sample: fill the struct sample with the
session, proxy and stream pointers") merged in 1.6-dev2, the sample
contains the pointer to the stream and sample fetch functions as well
as converters use it heavily. This requires from a lot of call places
to initialize 4 fields, and it was even forgotten at a few places.
This patch provides a convenient helper to initialize all these fields
at once, making it easy to prepare a new sample from a previous one for
example.
A few call places were cleaned up to make use of it. It will be needed
by further fixes.
At one place in the Lua code, it was moved earlier because we used to
call sample casts with a non completely initialized sample, which is
not clean eventhough at the moment there are no consequences.
the function server_parse_addr_change_request() contain an hardcoded
updater source "stats command". this function can be called from other
sources than the "stats command", so this patch make this argument
generic.
The commit 87b096 renames the functions srv_shutdown_backup_sessions()
and srv_shutdown_sessions() to srv_shutdown_backup_streams() and
srv_shutdown_streams().
The header file <proto/servers.h> does not repport these changes.
This bug should be repported in the 1.6 branch, even if it is useless
because new dev are frozen.
DNS selection preferences are actually declared inline in the
struct server. There are copied from the server struct to the
dns_resolution struct for each resolution.
Next patchs adds new preferences options, and it is not a good
way to copy all the configuration information before each dns
resolution.
This patch extract the configuration preference from the struct
server and declares a new dedicated struct. Only a pointer to this
new striuict will be copied before each dns resolution.
The +E mode escapes characters '"', '\' and ']' with '\' as prefix. It
mostly makes sense to use it in the RFC5424 structured-data log formats.
Example:
log-format-sd %{+Q,+E}o\ [exampleSDID@1234\ header=%[capture.req.hdr(0)]]
This patch moves the function hlua_checkudata which check that
an object contains the expected class_reference as metatable.
This function is commonly used by all the lua functions.
The function hlua_metatype is also moved.
When Lua executes functions from its API, these can throws an error.
These function must be executed in a special environment which catch
these error, otherwise a critical error (like segfault) can raise.
This patch add a c file called "hlua_fcn.c" which collect all the
Lua/c function needing safe environment for its execution.
Now, filter's configuration (.id, .conf and .ops fields) is stored in the
structure 'flt_conf'. So proxies own a flt_conf list instead of a filter
list. When a filter is attached to a stream, it gets a pointer on its
configuration. This avoids mixing the filter's context (owns by a stream) and
its configuration (owns by a proxy). It also saves 2 pointers per filter
instance.
Before, functions to filter HTTP body (and TCP data) were called from the moment
at least one filter was attached to the stream. If no filter is interested by
these data, this uselessly slows data parsing.
A good example is the HTTP compression filter. Depending of request and response
headers, the response compression can be enabled or not. So it could be really
nice to call it only when enabled.
So, now, to filter HTTP/TCP data, a filter must use the function
register_data_filter. For TCP streams, this function can be called only
once. But for HTTP streams, when needed, it must be called for each HTTP request
or HTTP response.
Only registered filters will be called during data parsing. At any time, a
filter can be unregistered by calling the function unregister_data_filter.
From the stream point of view, this new structure is opaque. it hides filters
implementation details. So, impact for future optimizations will be reduced
(well, we hope so...).
Some small improvements has been made in filters.c to avoid useless checks.
This new analyzer will be called for each HTTP request/response, before the
parsing of the body. It is identified by AN_FLT_HTTP_HDRS.
Special care was taken about the following condition :
* the frontend is a TCP proxy
* filters are defined in the frontend section
* the selected backend is a HTTP proxy
So, this patch explicitly add AN_FLT_HTTP_HDRS analyzer on the request and the
response channels when the backend is a HTTP proxy and when there are filters
attatched on the stream.
This patch simplifies http_request_forward_body and http_response_forward_body
functions.
For Chunked HTTP request/response, the body filtering can be really
expensive. In the worse case (many chunks of 1 bytes), the filters overhead is
of 3 calls per chunk. If http_data callback is useful, others are just
informative.
So these callbacks has been removed. Of course, existing filters (trace and
compression) has beeen updated accordingly. For the HTTP compression filter, the
update is quite huge. Its implementation is closer to the old one.
When no filter is attached to the stream, the CPU footprint due to the calls to
filters_* functions is huge, especially for chunk-encoded messages. Using macros
to check if we have some filters or not is a great improvement.
Furthermore, instead of checking the filter list emptiness, we introduce a flag
to know if filters are attached or not to a stream.
HTTP compression has been rewritten to use the filter API. This is more a PoC
than other thing for now. It allocates memory to work. So, if only for that, it
should be rewritten.
In the mean time, the implementation has been refactored to allow its use with
other filters. However, there are limitations that should be respected:
- No filter placed after the compression one is allowed to change input data
(in 'http_data' callback).
- No filter placed before the compression one is allowed to change forwarded
data (in 'http_forward_data' callback).
For now, these limitations are informal, so you should be careful when you use
several filters.
About the configuration, 'compression' keywords are still supported and must be
used to configure the HTTP compression behavior. In absence of a 'filter' line
for the compression filter, it is added in the filter chain when the first
compression' line is parsed. This is an easy way to do when you do not use other
filters. But another filter exists, an error is reported so that the user must
explicitly declare the filter.
For example:
listen tst
...
compression algo gzip
compression offload
...
filter flt_1
filter compression
filter flt_2
...
HTTP compression will be moved in a true filter. To prepare the ground, some
functions have been moved in a dedicated file. Idea is to keep everything about
compression algos in compression.c and everything related to the filtering in
flt_http_comp.c.
For now, a header has been added to help during the transition. It will be
removed later.
Unused empty ACL keyword list was removed. The "compression" keyword
parser was moved from cfgparse.c to flt_http_comp.c.
This patch adds the support of filters in HAProxy. The main idea is to have a
way to "easely" extend HAProxy by adding some "modules", called filters, that
will be able to change HAProxy behavior in a programmatic way.
To do so, many entry points has been added in code to let filters to hook up to
different steps of the processing. A filter must define a flt_ops sutrctures
(see include/types/filters.h for details). This structure contains all available
callbacks that a filter can define:
struct flt_ops {
/*
* Callbacks to manage the filter lifecycle
*/
int (*init) (struct proxy *p);
void (*deinit)(struct proxy *p);
int (*check) (struct proxy *p);
/*
* Stream callbacks
*/
void (*stream_start) (struct stream *s);
void (*stream_accept) (struct stream *s);
void (*session_establish)(struct stream *s);
void (*stream_stop) (struct stream *s);
/*
* HTTP callbacks
*/
int (*http_start) (struct stream *s, struct http_msg *msg);
int (*http_start_body) (struct stream *s, struct http_msg *msg);
int (*http_start_chunk) (struct stream *s, struct http_msg *msg);
int (*http_data) (struct stream *s, struct http_msg *msg);
int (*http_last_chunk) (struct stream *s, struct http_msg *msg);
int (*http_end_chunk) (struct stream *s, struct http_msg *msg);
int (*http_chunk_trailers)(struct stream *s, struct http_msg *msg);
int (*http_end_body) (struct stream *s, struct http_msg *msg);
void (*http_end) (struct stream *s, struct http_msg *msg);
void (*http_reset) (struct stream *s, struct http_msg *msg);
int (*http_pre_process) (struct stream *s, struct http_msg *msg);
int (*http_post_process) (struct stream *s, struct http_msg *msg);
void (*http_reply) (struct stream *s, short status,
const struct chunk *msg);
};
To declare and use a filter, in the configuration, the "filter" keyword must be
used in a listener/frontend section:
frontend test
...
filter <FILTER-NAME> [OPTIONS...]
The filter referenced by the <FILTER-NAME> must declare a configuration parser
on its own name to fill flt_ops and filter_conf field in the proxy's
structure. An exemple will be provided later to make it perfectly clear.
For now, filters cannot be used in backend section. But this is only a matter of
time. Documentation will also be added later. This is the first commit of a long
list about filters.
It is possible to have several filters on the same listener/frontend. These
filters are stored in an array of at most MAX_FILTERS elements (define in
include/types/filters.h). Again, this will be replaced later by a list of
filters.
The filter API has been highly refactored. Main changes are:
* Now, HA supports an infinite number of filters per proxy. To do so, filters
are stored in list.
* Because filters are stored in list, filters state has been moved from the
channel structure to the filter structure. This is cleaner because there is no
more info about filters in channel structure.
* It is possible to defined filters on backends only. For such filters,
stream_start/stream_stop callbacks are not called. Of course, it is possible
to mix frontend and backend filters.
* Now, TCP streams are also filtered. All callbacks without the 'http_' prefix
are called for all kind of streams. In addition, 2 new callbacks were added to
filter data exchanged through a TCP stream:
- tcp_data: it is called when new data are available or when old unprocessed
data are still waiting.
- tcp_forward_data: it is called when some data can be consumed.
* New callbacks attached to channel were added:
- channel_start_analyze: it is called when a filter is ready to process data
exchanged through a channel. 2 new analyzers (a frontend and a backend)
are attached to channels to call this callback. For a frontend filter, it
is called before any other analyzer. For a backend filter, it is called
when a backend is attached to a stream. So some processing cannot be
filtered in that case.
- channel_analyze: it is called before each analyzer attached to a channel,
expects analyzers responsible for data sending.
- channel_end_analyze: it is called when all other analyzers have finished
their processing. A new analyzers is attached to channels to call this
callback. For a TCP stream, this is always the last one called. For a HTTP
one, the callback is called when a request/response ends, so it is called
one time for each request/response.
* 'session_established' callback has been removed. Everything that is done in
this callback can be handled by 'channel_start_analyze' on the response
channel.
* 'http_pre_process' and 'http_post_process' callbacks have been replaced by
'channel_analyze'.
* 'http_start' callback has been replaced by 'http_headers'. This new one is
called just before headers sending and parsing of the body.
* 'http_end' callback has been replaced by 'channel_end_analyze'.
* It is possible to set a forwarder for TCP channels. It was already possible to
do it for HTTP ones.
* Forwarders can partially consumed forwardable data. For this reason a new
HTTP message state was added before HTTP_MSG_DONE : HTTP_MSG_ENDING.
Now all filters can define corresponding callbacks (http_forward_data
and tcp_forward_data). Each filter owns 2 offsets relative to buf->p, next and
forward, to track, respectively, input data already parsed but not forwarded yet
by the filter and parsed data considered as forwarded by the filter. A any time,
we have the warranty that a filter cannot parse or forward more input than
previous ones. And, of course, it cannot forward more input than it has
parsed. 2 macros has been added to retrieve these offets: FLT_NXT and FLT_FWD.
In addition, 2 functions has been added to change the 'next size' and the
'forward size' of a filter. When a filter parses input data, it can alter these
data, so the size of these data can vary. This action has an effet on all
previous filters that must be handled. To do so, the function
'filter_change_next_size' must be called, passing the size variation. In the
same spirit, if a filter alter forwarded data, it must call the function
'filter_change_forward_size'. 'filter_change_next_size' can be called in
'http_data' and 'tcp_data' callbacks and only these ones. And
'filter_change_forward_size' can be called in 'http_forward_data' and
'tcp_forward_data' callbacks and only these ones. The data changes are the
filter responsability, but with some limitation. It must not change already
parsed/forwarded data or data that previous filters have not parsed/forwarded
yet.
Because filters can be used on backends, when we the backend is set for a
stream, we add filters defined for this backend in the filter list of the
stream. But we must only do that when the backend and the frontend of the stream
are not the same. Else same filters are added a second time leading to undefined
behavior.
The HTTP compression code had to be moved.
So it simplifies http_response_forward_body function. To do so, the way the data
are forwarded has changed. Now, a filter (and only one) can forward data. In a
commit to come, this limitation will be removed to let all filters take part to
data forwarding. There are 2 new functions that filters should use to deal with
this feature:
* flt_set_http_data_forwarder: This function sets the filter (using its id)
that will forward data for the specified HTTP message. It is possible if it
was not already set by another filter _AND_ if no data was yet forwarded
(msg->msg_state <= HTTP_MSG_BODY). It returns -1 if an error occurs.
* flt_http_data_forwarder: This function returns the filter id that will
forward data for the specified HTTP message. If there is no forwarder set, it
returns -1.
When an HTTP data forwarder is set for the response, the HTTP compression is
disabled. Of course, this is not definitive.
The serial number for a generated certificate was computed using the requested
servername, without any variable/random part. It is not a problem from the
moment it is not regenerated.
But if the cache is disabled or when the certificate is evicted from the cache,
we may need to regenerate it. It is important to not reuse the same serial
number for the new certificate. Else clients (especially browsers) trigger a
warning because 2 certificates issued by the same CA have the same serial
number.
So now, the serial is a static variable initialized with now_ms (internal date
in milliseconds) and incremented at each new certificate generation.
(Ref MPS-2031)
in function 'si_connect', an existing connection is reused (and considered as
established) only when there are some pending data in the output channel.
This can be problem when filters are used, because a filter can choose to not
forward data immediatly. So when we try to initiate a connection to a server,
the output channel can be empty. In this situation, if the connection already
exists, it is not considered as established and nothing happens. If the stream
interface is in the state SI_ST_ASS, this leads to an infinite loop in
process_stream because it remains in this state.
This patch fixes this problem. Now, in 'si_connect', we always reuse an existing
connection, whether or not there are pending data in the output channel.
The function channel_recv_limit() relies on channel_reserved() which
itself relies on channel_in_transit(). Individually they're OK but
combined they're doing the wrong thing.
The problem is that we refrain from filling buffers while to_forward
is even much larger than the buffer because of a semantic issue along
the call chain. This is particularly visible when offloading SSL on
moderately large files (1 MB), though it is also visible on clear text.
Twice the number of recv() calls are made compared to what is needed,
and the typical performance drops by 15-20% in SSL in 1.6 and later,
and no directly measurable drop in 1.5 except when using strace.
There's no need for all these intermediate functions, so let's get
rid of them and reimplement channel_recv_limit() from scratch in a
safer way.
This fix needs to be backported to 1.6 and 1.5 (at least). Note that in
1.5 the function is called buffer_recv_limit() and it may differ a bit.
This function should return a 16-bit type as that is the type for
dns header id.
Also because it is doing an uint16 unpack big-endian operation.
Backport: can be backported to 1.6
Signed-off-by: Thiago Farina <tfarina@chromium.org>
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
The function http_reply_and_close has been added in proto_http.c to wrap calls
to stream_int_retnclose. This functions will be modified when the filters will
be added.
It is possible to create a http capture rule which points to a capture slot
id which does not exist.
Current patch prevent this when parsing configuration and prevent running
configuration which contains such rules.
This configuration is now invalid:
frontend f
bind :8080
http-request capture req.hdr(User-Agent) id 0
default_backend b
this one as well:
frontend f
bind :8080
declare capture request len 32 # implicit id is 0 here
http-request capture req.hdr(User-Agent) id 1
default_backend b
It applies of course to both http-request and http-response rules.
This is done by adding EVP_PKEY_EC type in supported types for the CA private
key when we get the message digest used to sign a generated X509 certificate.
So now, we support DSA, RSA and EC private keys.
And to be sure, when the type of the private key is not directly supported, we
get its default message digest using the function
'EVP_PKEY_get_default_digest_nid'.
We also use the key of the default certificate instead of generated it. So we
are sure to use the same key type instead of always using a RSA key.
First, the LRU cache must be initialized after the configuration parsing to
correctly set its size.
Next, the function 'ssl_sock_set_generated_cert' returns -1 when an error occurs
(0 if success). In that case, the caller is responsible to free the memory
allocated for the certificate.
Finally, when a SSL certificate is generated by HAProxy but cannot be inserted
in the cache, it must be freed when the SSL connection is closed. This happens
when 'tune.ssl.ssl-ctx-cache-size' is set to 0.
Michael Ezzell reported a bug causing haproxy to segfault during startup
when trying to send syslog message from Lua. The function __send_log() can
be called with *p that is NULL and/or when the configuration is not fully
parsed, as is the case with Lua.
This patch fixes this problem by using individual vectors instead of the
pre-generated strings log_htp and log_htp_rfc5424.
Also, this patch fixes a problem causing haproxy to write the wrong pid in
the logs -- the log_htp(_rfc5424) strings were generated at the haproxy
start, but "pid" value would be changed after haproxy is started in
daemon/systemd mode.
This patch adds a new RFC5424-specific log-format for the structured-data
that is automatically send by __send_log() when the sender is in RFC5424
mode.
A new statement "log-format-sd" should be used in order to set log-format
for the structured-data part in RFC5424 formatted syslog messages.
Example:
log-format-sd [exampleSDID@1234\ bytes=\"%B\"\ status=\"%ST\"]
The function __send_log() iterates over senders and passes the header as
the first vector to sendmsg(), thus it can send a logger-specific header
in each message.
A new logger arguments "format rfc5424" should be used in order to enable
RFC5424 header format. For example:
log 10.2.3.4:1234 len 2048 format rfc5424 local2 info
At the moment we have to call snprintf() for every log line just to
rebuild a constant. Thanks to sendmsg(), we send the message in 3 parts:
time-based header, proxy-specific hostname+log-tag+pid, session-specific
message.
This new target can be called from the frontend or the backend. It
is evaluated just before the backend choice and just before the server
choice. So, the input stream or HTTP request can be forwarded to a
server or to an internal service.
While the SI_ST_DIS state is set *after* doing the close on a connection,
it was set *before* calling release on an applet. Applets have no internal
flags contrary to connections, so they have no way to detect they were
already released. Because of this it happened that applets were closed
twice, once via si_applet_release() and once via si_release_endpoint() at
the end of a transaction. The CLI applet could perform a double free in
this case, though the situation to cause it is quite hard because it
requires that the applet is stuck on output in states that produce very
few data.
In order to solve this, we now assign the SI_ST_DIS state *after* calling
->release, and we refrain from doing so if the state is already assigned.
This makes applets work much more like connections and definitely avoids
this double release.
In the future it might be worth making applets have their own flags like
connections to carry their own state regardless of the stream interface's
state, especially when dealing with connection reuse.
No backport is needed since this issue was caused by the rearchitecture
in 1.6.
This function is a callback made only for calls from the applet handler.
Rename it to remove confusion. It's currently called from the Lua code
but that's not correct, we should call the notify and update functions
instead otherwise it will not enable the applet again.
This one is not needed anymore as what it used to do is either
completely covered by the new stream_int_notify() function, or undesired
and inherited from the past as a side effect of introducing the
connections.
This update is theorically never called since it's assigned only when
nothing is connected to the stream interface. However a test has been
added to si_update() to stay safe if some foreign code decides to call
si_update() in unsafe situations.
stream_int_notify() was taken from the common part between si_conn_wake_cb()
and si_applet_done(). It is designed to report activity to a stream from
outside its handler. It'll generally be used by lower layers to report I/O
completion but may also be used by remote streams if the buffer processing
is shared.
Now the call to stream_int_update() is moved to si_update(), which
is exclusively called from the stream, so that the socket layer may
be updated without updating the stream layer. This will later permit
to call it individually from other places (other tasks or applets for
example).
This function is designed to be called from within the stream handler to
update the channels' expiration timers and the stream interface's flags
based on the channels' flags. It needs to be called only once after the
channels' flags have settled down, and before they are cleared, though it
doesn't harm to call it as often as desired (it just slightly hurts
performance). It must not be called from outside of the stream handler,
as what it does will be used to compute the stream task's expiration.
The code was taken directly from stream_int_update_applet() and
stream_int_update_conn() which had exactly the same one except for
applet-specific or connection-specific status update.
This is not a real run queue and we're facing ugly bugs because
if this : if a an applet removes another applet from the queue,
typically the next one after itself, the list iterator loops
forever because the list's backup pointer is not valid anymore.
Before creating a run queue, let's rename this list.
Mailing list participant "mlist" reported negative conn_cur values in
stick tables as the result of "tcp-request connection track-sc". The
reason is that after the stick entry it copied from the session to the
stream, both the session and the stream grab a reference to the entry
and when the stream ends, it decrements one reference and one connection,
then the same is done for the session.
In fact this problem was already encountered slightly differently in the
past and addressed by Thierry using the patch below as it was believed by
then to be only a refcount issue since it was the observable symptom :
827752e "BUG/MEDIUM: stick-tables: refcount error after copying SC..."
In reality the problem is that the stream must touch neither the refcount
nor the connection count for entries it inherits from the session. While
we have no way to tell whether a track entry was inherited from the session
(since they're simply memcpy'd), it is possible to prevent the stream from
touching an entry that already exists in the session because that's a
guarantee that it was inherited from it.
Note that it may be a temporary fix. Maybe in the future when a session
gives birth to multiple streams we'll face a situation where a session may
be updated to add more tracked entries after instanciating some streams.
The correct long-term fix is to mark some tracked entries as shared or
private (or RO/RW). That will allow the session to track more entries
even after the same trackers are being used by early streams.
No backport is needed, this is only caused by the session/stream split in 1.6.
Added the definition of CHECK_HTTP_MESSAGE_FIRST and the declaration of
smp_prefetch_http to the header.
Changed smp_prefetch_http implementation to remove the static qualifier.
This directive gives HAProxy the ability to use the either the global
server-state-file directive or a local one using server-state-file-name to
load server states.
The state can be saved right before the reload by the init script, using
the "show servers state" command on the stats socket redirecting output into
a file.
This patch is inspired by Bowen Ni's proposal and it is based on his first
implementation:
With Lua integration in HAProxy 1.6, one can change the request method,
path, uri, header, response header etc except response line.
I'd like to contribute the following methods to allow modification of the
response line.
[...]
There are two new keywords in 'http-response' that allows you to rewrite
them in the native HAProxy config. There are also two new APIs in Lua that
allows you to do the same rewriting in your Lua script.
Example:
Use it in HAProxy config:
*http-response set-code 404*
Or use it in Lua script:
*txn.http:res_set_reason("Redirect")*
I dont take the full patch because the manipulation of the "reason" is useless.
standard reason are associated with each returned code, and unknown code can
take generic reason.
So, this patch can set the status code, and the reason is automatically adapted.
This was the first transparent proxy technology supported by haproxy
circa 2005 but it was obsoleted in 2007 by Tproxy 4.0 which removed a
lot of the earlier versions' shortcomings and was finally merged into
the kernel. Since nobody has been using cttproxy for many years now
and nobody has even just tried to compile the files, it's time to
remove it. The doc was updated as well.
This patch removes the special stick tables types names and
use the standard sample type names. This avoid the maintainance
of two types and remove the switch/case for matching a sample
type for each stick table type.
This patch is the first step for sample integration. Actually
the stick tables uses her own data type, and some converters
must be called to convert sample type to stick-tables types.
This patch removes the stick-table types and replace it by
the sample types. This prevent:
- Maintenance of two types of converters
- reduce the code using the samples converters
Each (http|tcp)-(request|response) action use the same method
for looking up the action keyword during the cofiguration parsing.
This patch mutualize the code.
This patch merges the conguration keyword struct. Each declared configuration
keyword struct are similar with the others. This patch simplify the code.
For performances considerations, some actions are not processed by remote
function. They are directly processed by the function. Some of these actions
does the same things but for different processing part (request / response).
This patch give the same name for the same actions, and change the normalization
of the other actions names.
This patch is ONLY a rename, it doesn't modify the code.
This patch is the first of a serie which merge all the action structs. The
function "tcp-request content", "tcp-response-content", "http-request" and
"http-response" have the same values and the same process for some defined
actions, but the struct and the prototype of the declared function are
different.
This patch try to unify all of these entries.
This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
appsessions started to be deprecated with the introduction of stick
tables, and the latter are much more powerful and flexible, and in
addition they are replicated between nodes and maintained across
reloads. Let's now remove appsession completely.
This function is now dedicated to idle connections only, which means
that it must not be used without any endpoint nor anything not a
connection. The connection remains attached to the stream interface.
This list member will be used to attach a connection to a list of
idle, reusable or queued connections. It's unused for now. Given
that it's not expected to be used more than a few times per session,
the member was put after the target, in the area starting at the
second cache line of the structure.
This function only detaches the endpoint from the stream-int and
optionally returns the original pointer. This will be needed to
steal idle connections from other connections.
Since we now always call this function with the reuse parameter cleared,
let's simplify the function's logic as it cannot return the existing
connection anymore. The savings on this inline function are appreciable
(240 bytes) :
$ size haproxy.old haproxy.new
text data bss dec hex filename
1020383 40816 36928 1098127 10c18f haproxy.old
1020143 40816 36928 1097887 10c09f haproxy.new
This patch introduces three new functions which can be used to find a
server in a farm using different server information:
- server unique id (srv->puid)
- server name
- find best match using either name or unique id
When performing best matching, the following applies:
- use the server name first (if provided)
- use the server id if provided
in any case, the function can update the caller about mismatches
encountered.
Change si_alloc_conn() to call si_release_endpoint() instead of
open-coding the connection releasing code when reuse is disabled.
This fuses the code with the one already dealing with applets, makes
it shorter and helps centralizing the connection freeing logic at a
single place.
ssl_sock_set_servername() is used to set the SNI hostname on an
outgoing connection. This function comes from code originally
provided by Christopher Faulet of Qualys.
This modification makes possible to use sample_fetch_string() in more places,
where we might need to fetch sample values which are not plain strings. This
way we don't need to fetch string, and convert it into another type afterwards.
When using aliased types, the caller should explicitly check which exact type
was returned (e.g. SMP_T_IPV4 or SMP_T_IPV6 for SMP_T_ADDR).
All usages of sample_fetch_string() are converted to use new function.
When Lua is disabled, the alternate functions must have the same
prototype as the original ones, otherwise we get such warnings :
src/stream.c:278:27: warning: too many arguments in call to 'hlua_ctx_destroy'
hlua_ctx_destroy(&s->hlua);
~~~~~~~~~~~~~~~~ ^
No backport is needed.
This patch adds two functions used for variable acces using the
variable full name. If the variable doesn't exists in the variable
pool name, it is created.
This patch adds support of variables during the processing of each stream. The
variables scope can be set as 'session', 'transaction', 'request' or 'response'.
The variable type is the type returned by the assignment expression. The type
can change while the processing.
The allocated memory can be controlled for each scope and each request, and for
the global process.
Implementation of a DNS client in HAProxy to perform name resolution to
IP addresses.
It relies on the freshly created UDP client to perform the DNS
resolution. For now, all UDP socket calls are performed in the
DNS layer, but this might change later when the protocols are
extended to be more suited to datagram mode.
A new section called 'resolvers' is introduced thanks to this patch. It
is used to describe DNS servers IP address and also many parameters.
Basic introduction of a UDP layer in HAProxy. It can be used as a
client only and manages UDP exchanges with servers.
It can't be used to load-balance UDP protocols, but only used by
internal features such as DNS resolution.
Ability to change a server IP address during HAProxy run time.
For now this is provided via function update_server_addr() which
currently is not called.
A log is emitted on each change. For now we do it inconditionally,
but later we'll want to do it only on certain circumstances, which
explains why the logging block is enclosed in if(1).
Following functions are now available in the SSL public API:
* ssl_sock_create_cert
* ssl_sock_get_generated_cert
* ssl_sock_set_generated_cert
* ssl_sock_generated_cert_serial
These functions could be used to create a certificate by hand, set it in the
cache used to store generated certificates and retrieve it. Here is an example
(pseudo code):
X509 *cacert = ...;
EVP_PKEY *capkey = ...;
char *servername = ...;
unsigned int serial;
serial = ssl_sock_generated_cert_serial(servername, strlen(servername));
if (!ssl_sock_get_generated_cert(serial, cacert)) {
SSL_CTX *ctx = ssl_sock_create_cert(servername, serial, cacert, capkey);
ssl_sock_set_generated_cert(ctx, serial, cacert);
}
With this patch, it is possible to configure HAProxy to forge the SSL
certificate sent to a client using the SNI servername. We do it in the SNI
callback.
To enable this feature, you must pass following BIND options:
* ca-sign-file <FILE> : This is the PEM file containing the CA certitifacte and
the CA private key to create and sign server's certificates.
* (optionally) ca-sign-pass <PASS>: This is the CA private key passphrase, if
any.
* generate-certificates: Enable the dynamic generation of certificates for a
listener.
Because generating certificates is expensive, there is a LRU cache to store
them. Its size can be customized by setting the global parameter
'tune.ssl.ssl-ctx-cache-size'.
This patch adds the ssl-dh-param-file global setting. It sets the
default DH parameters that will be used during the SSL/TLS handshake when
ephemeral Diffie-Hellman (DHE) key exchange is used, for all "bind" lines
which do not explicitely define theirs.
This patch does'nt add any new feature: the functional behavior
is the same than version 1.0.
Technical differences:
In this version all updates on different stick tables are
multiplexed on the same tcp session. There is only one established
tcp session per peer whereas in first version there was one established
tcp session per peer and per stick table.
Messages format was reviewed to be more evolutive and to support
further types of data exchange such as SSL sessions or other sticktable's
data types (currently only the sticktable's server id is supported).
