All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
The type was moved out as it's used by standard.h for netns_entry.
Instead of just being a forward declaration when not used, it's an
empty struct, which makes gdb happier (the resulting stripped executable
is the same).
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
This is where other imported components are located. All files which
used to directly include ebtree were touched to update their include
path so that "import/" is now prefixed before the ebtree-related files.
The ebtree.h file was slightly adjusted to read compiler.h from the
common/ subdirectory (this is the only change).
A build issue was encountered when eb32sctree.h is loaded before
eb32tree.h because only the former checks for the latter before
defining type u32. This was addressed by adding the reverse ifdef
in eb32tree.h.
No further cleanup was done yet in order to keep changes minimal.
log-proto <logproto>
The "log-proto" specifies the protocol used to forward event messages to
a server configured in a ring section. Possible values are "legacy"
and "octet-count" corresponding respectively to "Non-transparent-framing"
and "Octet counting" in rfc6587. "legacy" is the default.
Notes: a separated io_handler was created to avoid per messages test
and to prepare code to set different log protocols such as
request- response based ones.
Helper functions are used to dump bind, server or filter keywords. These
functions are used to report errors during the configuration parsing. To have a
coherent API, these functions are now prepared to handle a null pointer as
argument. If so, no action is performed and functions immediately return.
This patch should fix the issue #631. It is not a bug. There is no reason to
backport it.
srv_cleanup_connections() is supposed to be static, so mark it as so.
This patch should be backported where commit 6318d33ce6
("BUG/MEDIUM: connections: force connections cleanup on server changes")
will be backported, that is to say v1.9 to v2.1.
Fixes: 6318d33ce6 ("BUG/MEDIUM: connections: force connections cleanup
on server changes")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
I've been trying to understand a change of behaviour between v2.2dev5 and
v2.2dev6. Indeed our probe is regularly testing to add and remove
servers on a given backend such as:
# echo "show servers state be_foo" | sudo socat stdio /var/lib/haproxy/stats
113 be_foo 1 srv0 10.236.139.34 2 0 1 1 263 15 3 4 6 0 0 0 - 31255 -
113 be_foo 2 srv1 0.0.0.0 0 1 256 256 0 15 3 0 14 0 0 0 - 0 -
-> curl on the corresponding frontend: reply from server:31255
# echo "set server be_foo/srv1 addr 10.236.139.34 port 31257" | sudo socat stdio /var/lib/haproxy/stats
IP changed from '0.0.0.0' to '10.236.139.34', port changed from '0' to '31257' by 'stats socket command'
# echo "set server be_foo/srv1 weight 256" | sudo socat stdio /var/lib/haproxy/stats
# echo "set server be_foo/srv1 check-port 8500" | sudo socat stdio /var/lib/haproxy/stats
health check port updated.
# echo "set server be_foo/srv1 state ready" | sudo socat stdio /var/lib/haproxy/stats
# echo "show servers state be_foo" | sudo socat stdio /var/lib/haproxy/stats
113 be_foo 1 srv0 10.236.139.34 2 0 1 1 105 15 3 4 6 0 0 0 - 31255 -
113 be_foo 2 srv1 10.236.139.34 2 0 256 256 2319 15 3 2 6 0 0 0 - 31257 -
-> curl on the corresponding frontend: reply for server:31257
(notice the difference of weight)
# echo "set server be_foo/srv1 state maint" | sudo socat stdio /var/lib/haproxy/stats
# echo "set server be_foo/srv1 addr 0.0.0.0 port 0" | sudo socat stdio /var/lib/haproxy/stats
IP changed from '10.236.139.34' to '0.0.0.0', port changed from '31257' to '0' by 'stats socket command'
# echo "show servers state be_foo" | sudo socat stdio /var/lib/haproxy/stats
113 be_foo 1 srv0 10.236.139.34 2 0 1 1 263 15 3 4 6 0 0 0 - 31255 -
113 be_foo 2 srv1 0.0.0.0 0 1 256 256 0 15 3 0 14 0 0 0 - 0 -
-> curl on the corresponding frontend: reply from server:31255
# echo "set server be_foo/srv1 addr 10.236.139.34 port 31256" | sudo socat stdio /var/lib/haproxy/stats
IP changed from '0.0.0.0' to '10.236.139.34', port changed from '0' to '31256' by 'stats socket command'
# echo "set server be_foo/srv1 weight 256" | sudo socat stdio /var/lib/haproxy/stats
# echo "set server be_foo/srv1 check-port 8500" | sudo socat stdio /var/lib/haproxy/stats
health check port updated.
# echo "set server be_foo/srv1 state ready" | sudo socat stdio /var/lib/haproxy/stats
# echo "show servers state be_foo" | sudo socat stdio /var/lib/haproxy/stats
113 be_foo 1 srv0 10.236.139.34 2 0 1 1 105 15 3 4 6 0 0 0 - 31255 -
113 be_foo 2 srv1 10.236.139.34 2 0 256 256 2319 15 3 2 6 0 0 0 - 31256 -
-> curl on the corresponding frontend: reply from server:31257 (!)
Here we indeed would expect to get an anver from server:31256. The issue
is highly linked to the usage of `pool-purge-delay`, with a value which
is higher than the duration of the test, 10s in our case.
a git bisect between dev5 and dev6 seems to show commit
079cb9af22 ("MEDIUM: connections: Revamp the way idle connections are killed")
being the origin of this new behaviour.
So if I understand the later correctly, it seems that it was more a
matter of chance that we did not saw the issue earlier.
My patch proposes to force clean idle connections in the two following
cases:
- we set a (still running) server to maintenance
- we change the ip/port of a server
This commit should be backported to 2.1, 2.0, and 1.9.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
The variable 'ret' must only be declared When HAProxy is compiled with the SSL
support (more precisely SSL_CTRL_SET_TLSEXT_HOSTNAME must be defined).
No backport needed.
A shared tcp-check ruleset is now created to support agent checks. The following
sequence is used :
tcp-check send "%[var(check.agent_string)] log-format
tcp-check expect custom
The custom function to evaluate the expect rule does the same that it was done
to handle agent response when a custom check was used.
Parsing of following keywords have been moved in checks.c file : addr, check,
check-send-proxy, check-via-socks4, no-check, no-check-send-proxy, rise, fall,
inter, fastinter, downinter and port.
A global list to tcp-check ruleset can now be used to share common rulesets with
all backends without any duplication. It is mandatory to convert all specific
protocol checks (redis, pgsql...) to tcp-check healthchecks.
To do so, a flag is now attached to each tcp-check ruleset to know if it is a
shared ruleset or not. tcp-check rules defined in a backend are still directly
attached to the proxy and not shared. In addition a second flag is used to know
if the ruleset is inherited from the defaults section.
To allow reusing these blocks without consuming more memory, their list
should be static and share-able accross uses. The head of the list will
be shared as well.
It is thus necessary to extract the head of the rule list from the proxy
itself. Transform it into a pointer instead, that can be easily set to
an external dynamically allocated head.
The options and directives related to the configuration of checks in a backend
may be defined after the servers declarations. So, initialization of the check
of each server must not be performed during configuration parsing, because some
info may be missing. Instead, it must be done during the configuration validity
check.
Thus, callback functions are registered to be called for each server after the
config validity check, one for the server check and another one for the server
agent-check. In addition deinit callback functions are also registered to
release these checks.
This patch should be backported as far as 1.7. But per-server post_check
callback functions are only supported since the 2.1. And the initcall mechanism
does not exist before the 1.9. Finally, in 1.7, the code is totally
different. So the backport will be harder on older versions.
Error codes ERR_WARN and ERR_ALERT are used to signal that the error
given is of the corresponding level. All errors are displayed as ALERT
in the display_parser_err() function.
Differentiate the display level based on the error code. If both
ERR_WARN and ERR_ALERT are used, ERR_ALERT is given priority.
Documentation states that default settings for ssl server options can be set
using either ssl-default-server-options or default-server directives. In practice,
not all ssl server options can have default values, such as ssl-min-ver, ssl-max-ver,
etc..
This patch adds the missing ssl options in srv_ssl_settings_cpy() and srv_parse_ssl(),
making it possible to write configurations like the following examples, and have them
behave as expected.
global
ssl-default-server-options ssl-max-ver TLSv1.2
defaults
mode http
listen l1
bind 1.2.3.4:80
default-server ssl verify none
server s1 1.2.3.5:443
listen l2
bind 2.2.3.4:80
default-server ssl verify none ssl-max-ver TLSv1.3 ssl-min-ver TLSv1.2
server s1 1.2.3.6:443
This should be backported as far as 1.8.
This fixes issue #595.
Before supporting "server" line in "peers" section, such sections without
any local peer were removed from the configuration to get it validated.
This patch fixes the issue where a "server" line without address and port which
is a remote peer without address and port makes the configuration parsing fail.
When encoutering such cases we now ignore such lines remove them from the
configuration.
Thank you to Jrme Magnin for having reported this bug.
Must be backported to 2.1 and 2.0.
The original algorithm always killed half the idle connections. This doesn't
take into account the way the load can change. Instead, we now kill half
of the exceeding connections (exceeding connection being the number of
used + idle connections past the last maximum used connections reached).
That way if we reach a peak, we will kill much less, and it'll slowly go back
down when there's less usage.
Revamp the server connection lists. We know have 3 lists :
- idle_conns, which contains idling connections
- safe_conns, which contains idling connections that are safe to use even
for the first request
- available_conns, which contains connections that are not idling, but can
still accept new streams (those are HTTP/2 or fastcgi, and are always
considered safe).
This patch adds the `unique-id` option to `proxy-v2-options`. If this
option is set a unique ID will be generated based on the `unique-id-format`
while sending the proxy protocol v2 header and stored as the unique id for
the first stream of the connection.
This feature is meant to be used in `tcp` mode. It works on HTTP mode, but
might result in inconsistent unique IDs for the first request on a keep-alive
connection, because the unique ID for the first stream is generated earlier
than the others.
Now that we can send unique IDs in `tcp` mode the `%ID` log variable is made
available in TCP mode.
The isalnum(), isalpha(), isdigit() etc functions from ctype.h are
supposed to take an int in argument which must either reflect an
unsigned char or EOF. In practice on some platforms they're implemented
as macros referencing an array, and when passed a char, they either cause
a warning "array subscript has type 'char'" when lucky, or cause random
segfaults when unlucky. It's quite unconvenient by the way since none of
them may return true for negative values. The recent introduction of
cygwin to the list of regularly tested build platforms revealed a lot
of breakage there due to the same issues again.
So this patch addresses the problem all over the code at once. It adds
unsigned char casts to every valid use case, and also drops the unneeded
double cast to int that was sometimes added on top of it.
It may be backported by dropping irrelevant changes if that helps better
support uncommon platforms. It's unlikely to fix bugs on platforms which
would already not emit any warning though.
When an end pointer is passed, instead of complaining that a comma is
missing after a keyword, sample_parse_expr() will silently return the
pointer to the current location into this return pointer so that the
caller can continue its parsing. This will be used by more complex
expressions which embed sample expressions, and may even permit to
embed sample expressions into arguments of other expressions.
Most DNS servers provide A/AAAA records in the Additional section of a
response, which correspond to the SRV records from the Answer section:
;; QUESTION SECTION:
;_http._tcp.be1.domain.tld. IN SRV
;; ANSWER SECTION:
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A1.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A8.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A5.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A6.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A4.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A3.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A2.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A7.domain.tld.
;; ADDITIONAL SECTION:
A1.domain.tld. 3600 IN A 192.168.0.1
A8.domain.tld. 3600 IN A 192.168.0.8
A5.domain.tld. 3600 IN A 192.168.0.5
A6.domain.tld. 3600 IN A 192.168.0.6
A4.domain.tld. 3600 IN A 192.168.0.4
A3.domain.tld. 3600 IN A 192.168.0.3
A2.domain.tld. 3600 IN A 192.168.0.2
A7.domain.tld. 3600 IN A 192.168.0.7
SRV record support was introduced in HAProxy 1.8 and the first design
did not take into account the records from the Additional section.
Instead, a new resolution is associated to each server with its relevant
FQDN.
This behavior generates a lot of DNS requests (1 SRV + 1 per server
associated).
This patch aims at fixing this by:
- when a DNS response is validated, we associate A/AAAA records to
relevant SRV ones
- set a flag on associated servers to prevent them from running a DNS
resolution for said FADN
- update server IP address with information found in the Additional
section
If no relevant record can be found in the Additional section, then
HAProxy will failback to running a dedicated resolution for this server,
as it used to do.
This behavior is the one described in RFC 2782.
Since commit 980855bd95 ("BUG/MEDIUM: server: initialize the orphaned
conns lists and tasks at the end"), we no longer use err section.
This should fix github issue #438
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Issue #417 reports a possible memory leak in the state-file loading code.
There's one such place in the loop which corresponds to parsing errors
where the curreently allocated line is not freed when dropped. In any
case this is very minor in that no more than the file's length may be
lost in the worst case, considering that the whole file is kept anyway
in case of success. This fix addresses this.
It should be backported to 2.1.
The global state file tree isn't configured for unique keys, so if an
entry appears multiple times, e.g. due to a bogus script that concatenates
entries multiple times, this will needlessly eat memory. Let's just drop
duplicates.
This should be backported to 2.1.
Starting haproxy with a state file of 700k servers eats 11.2 GB of RAM
due to a mistake in the function that loads the strings into a tree: it
allocates a full buffer for each backend+server name instead of allocating
just the required string. By just fixing this we're down to 80 MB.
This should be backported to 2.1.
As reported in issue #408, "agent-addr" doesn't work on default-server
lines. This is due to the transcription of the old "addr" option in commit
6e5e0d8f9e ("MINOR: server: Make 'default-server' support 'addr' keyword.")
which correctly assigns it to the check.addr and agent.addr fields, but
which also copies the default check.addr into both the check's and the
agent's addr fields. Thus the default agent's address is never used.
This fix makes sure to copy the check from the check and the agent from
the agent. However it's worth noting that if "addr" is specified on the
server line, it will still overwrite both the check and the agent's
addresses.
This must be backported as far as 1.8.
It was noted in #48 that there are times when a configuration
may use the server-template directive with SRV records and
simultaneously want to control weights using an agent-check or
through the runtime api. This patch adds a new option
"ignore-weight" to the "resolve-opts" directive.
When specified, any weight indicated within an SRV record will
be ignored. This is for both initial resolution and ongoing
resolution.
fopen() can return NULL when state file is missing. This patch adds a
check of fopen() return value so we can skip processing in such case.
No backport needed.
Instead of using the same type for regular linked lists and "autolocked"
linked lists, use a separate type, "struct mt_list", for the autolocked one,
and introduce a set of macros, similar to the LIST_* macros, with the
MT_ prefix.
When we use the same entry for both regular list and autolocked list, as
is done for the "list" field in struct connection, we know have to explicitely
cast it to struct mt_list when using MT_ macros.
There were 221 places where a status message or an error message were built
to be returned on the CLI. All of them were replaced to use cli_err(),
cli_msg(), cli_dynerr() or cli_dynmsg() depending on what was expected.
This removed a lot of duplicated code because most of the times, 4 lines
are replaced by a single, safer one.
A problem involving server slowstart was reported by @max2k1 in issue #197.
The problem is that pendconn_grab_from_px() takes the proxy lock while
already under the server's lock while process_srv_queue() first takes the
proxy's lock then the server's lock.
While the latter seems more natural, it is fundamentally incompatible with
mayn other operations performed on servers, namely state change propagation,
where the proxy is only known after the server and cannot be locked around
the servers. Howwever reversing the lock in process_srv_queue() is trivial
and only the few functions related to dynamic cookies need to be adjusted
for this so that the proxy's lock is taken for each server operation. This
is possible because the proxy's server list is built once at boot time and
remains stable. So this is what this patch does.
The comments in the proxy and server structs were updated to mention this
rule that the server's lock may not be taken under the proxy's lock but
may enclose it.
Another approach could consist in using a second lock for the proxy's queue
which would be different from the regular proxy's lock, but given that the
operations above are rare and operate on small servers list, there is no
reason for overdesigning a solution.
This fix was successfully tested with 10000 servers in a backend where
adjusting the dyncookies in loops over the CLI didn't have a measurable
impact on the traffic.
The only workaround without the fix is to disable any occurrence of
"slowstart" on server lines, or to disable threads using "nbthread 1".
This must be backported as far as 1.8.
When we're purging idle connections, there's a race condition, when we're
removing the connection from the idle list, to add it to the list of
connections to free, if the thread owning the connection tries to free it
at the same time.
To fix this, simply add a per-thread lock, that has to be hold before
removing the connection from the idle list, and when, in conn_free(), we're
about to remove the connection from every list. That way, we know for sure
the connection will stay valid while we remove it from the idle list, to add
it to the list of connections to free.
This should happen rarely enough that it shouldn't have any impact on
performances.
This has not been reported yet, but could provoke random segfaults.
This should be backported to 2.0.
