This is totally ugly, smp_fetch_src() is exported only so that stick_table.c
can (ab)use it in the {sc,src}_* sample fetch functions. It could be argued
that the sample could have been reconstructed there in place, but we don't
even need to duplicate the code. We'd rather simply retrieve the "src"
fetch's function from where it's used at init time and be done with it.
The file proto_tcp.c has become a real mess because it still contains
tons of definitions that have nothing to do with the TCP protocol setup.
This commit moves the ruleset actions "set-src-port", "set-dst-port",
"set-src", "set-dst", and "silent-drop" to a new file "tcp_act.c".
Nothing has changed beyond this.
get_old_sockets() mistakenly sets ret=0 instead of ret2=0 before leaving
when the old process announces zero FD. So it will return an error
instead of success. This must be particularly rare not to have a
single socket to offer though!
A few comments were added to make it more obvious what to expect in
return.
This must be backported to 1.8 since the bug has always been there.
Previously, pidfile was only described for daemon mode. In the case of
master-worker mode, the handling of pidfile is different from daemon mode,
so the description has been added.
Now we don't limit ourselves to listeners found in proxies nor peers
anymore, we're instead scanning all known FDs for those marked with
".exported=1". Just doing so has significantly simplified the code,
and will later allow to yield while sending FDs if desired.
When it comes to retrieving a possible namespace name or interface
name, for now this is only performed on listeners since these are the
only ones carrying such info. Once this moves somewhere else, we'll
be able to also pass these info for UDP receivers for example, with
only tiny changes.
This new flag will be used to mark FDs that must be passed to any future
process across the CLI's "_getsocks" command.
The scheme here is quite complex and full of special cases:
- FDs inherited from parent processes are *not* exported this way, as
they are supposed to instead be passed by the master process itself
across reloads. However such FDs ought never to be paused otherwise
this would disrupt the socket in the parent process as well;
- FDs resulting from a "bind" performed over a socket pair, which are
in fact one side of a socket pair passed inside another control socket
pair must not be passed either. Since all of them are used the same
way, for now it's enough never to put this "exported" flag to FDs
bound by the socketpair code.
- FDs belonging to temporary listeners (e.g. a passive FTP data port)
must not be passed either. Fortunately we don't have such FDs yet.
- the rest of the listeners for now are made of TCP, UNIX stream, ABNS
sockets and are exportable, so they get the flag.
- UDP listeners were wrongly created as listeners and are not suitable
here. Their FDs should be passed but for now they are not since the
client doesn't even distinguish the SO_TYPE of the retrieved sockets.
In addition, it's important to keep in mind that:
- inherited FDs may never be closed in master process but may be closed
in worker processes if the service is shut down (useless since still
bound, but technically possible) ;
- inherited FDs may not be disabled ;
- exported FDs may be disabled because the caller will perform the
subsequent listen() on them. However that might not work for all OSes
- exported FDs may be closed, it just means the service was shut down
from the worker, and will be rebound in the new process. This implies
that we have to disable exported on close().
=> as such, contrary to an apparently obvious equivalence, the "exported"
status doesn't imply anything regarding the ability to close a
listener's FD or not.
This essentially undoes what we did in fd.c in 1.8 to support seamless
reload. Since we don't need to remove an fd anymore we can turn
fd_delete() to the simple function it used to be.
We used to require fd_remove() to remove an FD from a poller when we
still had the FD cache and it was not possible to directly act on the
pollers. Nowadays we don't need this anymore as the pollers will
automatically unregister disabled FDs. The fd_remove() hack is
particularly problematic because it additionally hides the FD from
the known FD list and could make one think it's closed.
It's used at two places:
- with the async SSL engine
- with the listeners (when unbinding from an fd for another process)
Let's just use fd_stop_both() instead, which will propagate down the
stack to do the right thing, without removing the FD from the array
of known ones.
Now when dumping FDs using "show fd" on a process which still knows some
of the other workers' FDs, the FD will properly be listed with a listener
state equal to "ZOM" for "zombie". This guarantees that the FD is still
known and will properly be passed using _getsocks().
The fix 7df5c2d ("BUG/MEDIUM: ssl: fix ssl_bind_conf double free") was
not complete. The problem still occurs when using wildcards in
certificate, during the deinit.
This patch removes the free of the ssl_conf structure in
ssl_sock_free_all_ctx() since it's already done in the crtlist deinit.
It must be backported in 2.2.
During a reload operation, we used to send listener options associated
with each passed file descriptor. These were passed as binary contents
for the size of the "options" field in the struct listener. This means
that any flag value change or field size change would be problematic,
the former failing to properly grab certain options, the latter possibly
causing permanent failures during this operation.
Since these two previous commits:
MINOR: reload: determine the foreing binding status from the socket
BUG/MINOR: reload: detect the OS's v6only status before choosing an old socket
we don't need this anymore as the values are determined from the file
descriptor itself.
Let's just turn the previous 32 bits to vestigal space, send them as
zeroes and ignore them on receipt. The only possible side effect is if
someone would want to roll back from a 2.3 to 2.2 or earlier, such options
might be ignored during this reload. But other forthcoming changes might
make this fail as well anyway so that's not a reason for keeping this
behavior.
Let's not look at the listener options passed by the original process
and determine from the socket itself whether it is configured for
transparent mode or not. This is cleaner and safer, and doesn't rely
on flag values that could possibly change between versions.
The v4v6 and v6only options are passed as data during the socket transfer
between processes so that the new process can decide whether it wants to
reuse a socket or not. But this actually misses one point: if no such option
is set and the OS defaults are changed between the reloads, then the socket
will still be inherited and will never be rebound using the new options.
This can be seen by starting the following config:
global
stats socket /tmp/haproxy.sock level admin expose-fd listeners
frontend testme
bind :::1234
timeout client 2000ms
Having a look at the OS settins, v6only is disabled:
$ cat /proc/sys/net/ipv6/bindv6only
0
A first check shows it's indeed bound to v4 and v6:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 *:1234 *:*
Reloading the process doesn't change anything (which is expected). Now let's set
bindv6only:
$ echo 1 | sudo tee /proc/sys/net/ipv6/bindv6only
1
$ cat /proc/sys/net/ipv6/bindv6only
1
Reloading gives the same state:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 *:1234 *:*
However a restart properly shows a correct bind:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 [::]:1234 [::]:*
This one doesn't change once bindv6only is reset, for the same reason.
This patch attacks this problem differently. Instead of passing the two
options at once for each listening fd, it ignores the options and reads
the socket's current state for the IPV6_V6ONLY flag and sets it only.
Then before looking for a compatible FD, it checks the OS's defaults
before deciding which of the v4v6 and v6only needs to be kept on the
listener. And the selection is only made on this.
First, it addresses this issue. Second, it also ensures that if such
options are changed between reloads to identical states, the socket
can still be inherited. For example adding v4v6 when bindv6only is not
set will allow the socket to still be usable. Third, it avoids an
undesired dependency on the LI_O_* bit values between processes across
a reload (for these ones at least).
It might make sense to backport this to some recent stable versions, but
quite frankly the likelyhood that anyone will ever notice it is extremely
faint.
If a socket was already bound (inherited from a parent or retrieved from
a previous process), there's no point trying to change its IPV6_V6ONLY
state since it will fail. This is visible in strace as an EINVAL during
a reload when passing FDs.
The use of Common Name is fading out in favor of the RFC recommended
way of using SAN extensions. For example, Chrome from version 58
will only match server name against SAN.
The following patch adds SAN extension by default to all generated certificates.
The SAN extension will be of type DNS and based on the server name.
haproxy supports generating SSL certificates based on SNI using a provided
CA signing certificate. Because CA certificates may be signed by multiple
CAs, in some scenarios, it is neccesary for the server to attach the trust chain
in addition to the generated certificate.
The following patch adds the ability to serve the entire trust chain with
the generated certificate. The chain is loaded from the provided
`ca-sign-file` PEM file.
As reported in issue #816, when building task.o at -O1 with gcc 4.7 or
4.8, we get the following warning:
CC src/task.o
In file included from include/haproxy/proxy.h:31:0,
from include/haproxy/cfgparse.h:27,
from src/task.c:19:
src/task.c: In function 'next_timer_expiry':
include/haproxy/ticks.h:121:10: warning: 'key' may be used uninitialized in this function [-Wmaybe-uninitialized]
src/task.c:349:2: note: 'key' was declared here
It is wrong since the condition to use 'key' is exactly the same as
the one used to set it. This warning disappears at -O2 and disappeared
from gcc 5 and above. Let's just initialize 'key' there, it only adds
16 bytes of code and remains cheap enough for this function.
This should be backported to 2.2.
As reported in https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=24745,
haproxy fails to build with TARGET=generic and without extra options due
to auxv.h not being included, since the __GLIBC__ macro is not yet defined.
Let's include it after other libc headers so that the __GLIBC__ definition
is known. Thanks to David and Tim for the diag.
This should be backported to 2.2.
Since commit f92afb732 ("MEDIUM: cfgparse: Emit hard error on truncated lines")
we now produce parsing errors on truncated lines, in an effort to clean
up dangerous or broken config files. And it turns out that one of our own
regression tests was suffering from this, as diagnosed by William and Tim.
The cause is the leading spaces in front of "} -start" that vtest makes
part of the output file, so the file finishes with a partial line made
of spaces.
Using a duplicate cache name most likely is the result of a misgenerated
configuration. There is no good reason to allow this, as the duplicate
caches can't be referred to.
This commit resolves GitHub issue #820.
It can be argued whether this is a fix for a bug or not. I'm erring on the
side of caution and marking this as a "new feature". It can be considered for
backporting to 2.2, but for other branches the risk of accidentally breaking
some working (but non-ideal) configuration might be too large.
When the cache name is left out in 'filter cache' the error message refers
to a missing '<id>'. The name of the cache is called 'name' within the docs.
Adjust the error message for consistency.
The error message was introduced in 99a17a2d91.
This commit first appeared in 1.9, thus the patch must be backported to 1.9+.
as per the suggestions from Cyril and Willy on the mailing list:
Message-ID: <a0010c72-70b8-0647-c269-55c6614627c3@free.fr>
and with direct contributions from Tim, this changes large parts
of the bug issue template.
The Feature template is also updated as well as a new template for
Code Reports is introduced.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
The negative filters which are supposed to exclude a SNI from a
wildcard, never worked. Indeed the negative filters were skipped in the
code.
To fix the issue, this patch looks for negative filters that are on the
same line as a the wildcard that just matched.
This patch should fix issue #818. It must be backported in 2.2. The
problem also exists in versions > 1.8 but the infrastructure required to
fix this was only introduced in 2.1. In older versions we should
probably change the documentation to state that negative filters are
useless.
Released version 2.3-dev3 with the following main changes :
- SCRIPTS: git-show-backports: make -m most only show the left branch
- SCRIPTS: git-show-backports: emit the shell command to backport a commit
- BUILD: Makefile: require SSL_LIB, SSL_INC to be explicitly set
- CI: travis-ci: specify SLZ_LIB, SLZ_INC for travis builds
- BUG/MEDIUM: mux-h1: Refresh H1 connection timeout after a synchronous send
- CLEANUP: dns: typo in reported error message
- BUG/MAJOR: dns: disabled servers through SRV records never recover
- BUG/MINOR: spoa-server: fix size_t format printing
- DOC: spoa-server: fix false friends `actually`
- BUG/MINOR: ssl: fix memory leak at OCSP loading
- BUG/MEDIUM: ssl: memory leak of ocsp data at SSL_CTX_free()
- BUG/MEDIUM: map/lua: Return an error if a map is loaded during runtime
- MINOR: arg: Add an argument type to keep a reference on opaque data
- BUG/MINOR: converters: Store the sink in an arg pointer for debug() converter
- BUG/MINOR: lua: Duplicate map name to load it when a new Map object is created
- BUG/MINOR: arg: Fix leaks during arguments validation for fetches/converters
- BUG/MINOR: lua: Check argument type to convert it to IPv4/IPv6 arg validation
- BUG/MINOR: lua: Check argument type to convert it to IP mask in arg validation
- MINOR: hlua: Don't needlessly copy lua strings in trash during args validation
- BUG/MINOR: lua: Duplicate lua strings in sample fetches/converters arg array
- MEDIUM: lua: Don't filter exported fetches and converters
- MINOR: lua: Add support for userlist as fetches and converters arguments
- MINOR: lua: Add support for regex as fetches and converters arguments
- MINOR: arg: Use chunk_destroy() to release string arguments
- BUG/MINOR: snapshots: leak of snapshots on deinit()
- CLEANUP: ssl: ssl_sock_crt2der semicolon and spaces
- MINOR: ssl: add ssl_{c,s}_chain_der fetch methods
- CLEANUP: fix all duplicated semicolons
- BUG/MEDIUM: ssl: fix the ssl-skip-self-issued-ca option
- BUG/MINOR: ssl: ssl-skip-self-issued-ca requires >= 1.0.2
- BUG/MINOR: stats: use strncmp() instead of memcmp() on health states
- BUILD: makefile: don't disable -Wstringop-overflow anymore
- BUG/MINOR: ssl: double free w/ smp_fetch_ssl_x_chain_der()
- BUG/MEDIUM: htx: smp_prefetch_htx() must always validate the direction
- BUG/MEDIUM: ssl: never generates the chain from the verify store
- OPTIM: regex: PCRE2 use JIT match when JIT optimisation occured.
- BUG/MEDIUM: ssl: does not look for all SNIs before chosing a certificate
- CLEANUP: ssl: remove poorly readable nested ternary
In bug #810, the SNI are not matched correctly, indeed when trying to
match a certificate type in ssl_sock_switchctx_cbk() all SNIs were not
looked up correctly.
In the case you have in a crt-list:
wildcard.subdomain.domain.tld.pem.rsa *.subdomain.domain.tld record.subdomain.domain.tld
record.subdomain.domain.tld.pem.ecdsa record.subdomain.domain.tld another-record.subdomain.domain.tld
If the client only supports RSA and requests
"another-record.subdomain.domain.tld", HAProxy will find the single
ECDSA certificate and won't try to look up for a wildcard RSA
certificate.
This patch fixes the code so we look for all single and
wildcard before chosing the certificate type.
This bug was introduced by commit 3777e3a ("BUG/MINOR: ssl: certificate
choice can be unexpected with openssl >= 1.1.1").
It must be backported as far as 1.8 once it is heavily tested.
When a regex had been succesfully compiled by the JIT pass, it is better
to use the related match, thanksfully having same signature, for better
performance.
Signed-off-by: David Carlier <devnexen@gmail.com>
In bug #781 it was reported that HAProxy completes the certificate chain
using the verify store in the case there is no chain.
Indeed, according to OpenSSL documentation, when generating the chain,
OpenSSL use the chain store OR the verify store in the case there is no
chain store.
As a workaround, this patch always put a NULL chain in the SSL_CTX so
OpenSSL does not tries to complete it.
This must be backported in all branches, the code could be different,
the important part is to ALWAYS set a chain, and uses sk_X509_new_null()
if the chain is NULL.
It is possible to process a channel based on desynchronized info if a
request fetch is called from a response and conversely. However, the
code in smp_prefetch_htx() already makes sure the analysis has already
started before trying to fetch from a buffer, so the problem effectively
lies in response rules making use of request expressions only.
Usually it's not a problem as extracted data are checked against the
current HTTP state, except when it comes to the start line, which is
usually accessed directly from sample fetch functions such as status,
path, url, url32, query and so on. In this case, trying to access the
request buffer from the response path will lead to unpredictable
results. When building with DEBUG_STRICT, a process violating these
rules will simply die after emitting:
FATAL: bug condition "htx->first == -1" matched at src/http_htx.c:67
But when this is not enabled, it may or may not crash depending on what
the pending request buffer data look like when trying to spot a start
line there. This is typically what happens in issue #806.
This patch adds a test in smp_prefetch_htx() so that it does not try
to parse an HTX buffer in a channel belonging to the wrong direction.
There's one special case on the "method" sample fetch since it can
retrieve info even without a buffer, from the other direction, as
long as the method is one of the well known ones. Three, we call
smp_prefetch_htx() only if needed.
This was reported in 2.0 and must be backported there (oldest stable
version with HTX).
smp_fetch_ssl_x_chain_der() uses the SSL_get_peer_cert_chain() which
does not increment the refcount of the chain, so it should not be free'd.
The bug was introduced by a598b50 ("MINOR: ssl: add ssl_{c,s}_chain_der
fetch methods"). No backport needed.
The reports for health states are checked using memcmp() in order to
only focus on the first word and possibly ignore trailing %d/%d etc.
This makes gcc unhappy about a potential use of "" as the string, which
never happens since the string is always set. This resulted in commit
c4e6460f6 ("MINOR: build: Disable -Wstringop-overflow.") to silence
these messages. However some lengths are incorrect (though cannot cause
trouble), and in the end strncmp() is just safer and cleaner.
This can be backported to all stable branches as it will shut a warning
with gcc 8 and above.
In commit f187ce6, the ssl-skip-self-issued-ca option was accidentally
made useless by reverting the SSL_CTX reworking.
The previous attempt of making this feature was putting each certificate
of the chain in the SSL_CTX with SSL_CTX_add_extra_chain_cert() and was
skipping the Root CA.
The problem here is that doing it this way instead of doing a
SSL_CTX_set1_chain() break the support of the multi-certificate bundles.
The SSL_CTX_build_cert_chain() function allows one to remove the Root CA
with the SSL_BUILD_CHAIN_FLAG_NO_ROOT flag. Use it instead of doing
tricks with the CA.
Should fix issue #804.
Must be backported in 2.2.
Following work from Arjen and Mathilde, it adds ssl_{c,s}_chain_der
methods; it returns DER encoded certs from SSL_get_peer_cert_chain
Also update existing vtc tests to add random intermediate certificates
When getting the result through this header:
http-response add-header x-ssl-chain-der %[ssl_c_chain_der,hex]
One can parse it with any lib accepting ASN.1 DER data, such as in go:
bin, err := encoding/hex.DecodeString(cert)
certs_parsed, err := x509.ParseCertificates(bin)
Cc: Arjen Nienhuis <arjen@zorgdoc.nl>
Signed-off-by: Mathilde Gilles <m.gilles@criteo.com>
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Free the snapshots on deinit() when they were initialized in a proxy
upon an error.
This was introduced by c55015e ("MEDIUM: snapshots: dynamically allocate
the snapshots").
Should be backported as far as 1.9.
This way, all fields of the buffer structure are reset when a string argument
(ARGT_STR) is released. It is also a good way to explicitly specify this kind
of argument is a chunk. So .data and .size fields must be set.
This patch may be backported to ease backports.
It means now regsub() converter is now exported to the lua. Map converters based
on regex are not available because the map arguments are not supported.
Thanks to previous commits, it is now safe to use from lua the sample fetches
and sample converters that convert arguments, especially the strings
(ARGT_STR). So now, there are all exported to the lua. They was filtered on the
validation functions. Only fetches without validation functions or with val_hdr
or val_payload_lv functions were exported, and converters without validation
functions.
This patch depends on following commits :
* aec27ef44 "BUG/MINOR: lua: Duplicate lua strings in sample fetches/converters arg array"
* fdea1b631 "MINOR: hlua: Don't needlessly copy lua strings in trash during args validation"
It must be backported as far as 2.1 because the date() and http_date()
converters are no longer exported because of the filter on the validation
function, since the commit ae6f125c7 ("MINOR: sample: add us/ms support to
date/http_date)".
Strings in the argument array used by sample fetches and converters must be
duplicated. This is mandatory because, during the arguments validations, these
strings may be converted and released. It works this way during the
configuration parsing and there is no reason to adapt this behavior during the
runtime when a sample fetch or a sample converter is called from the lua. In
fact, there is a reason to not change the behavior. It must reamain simple for
everyone to add new fetches or converters.
Thus, lua strings are duplicated. It is only performed at the end of the
hlua_lua2arg_check() function, if the argument is still a ARGT_STR. Of course,
it requires a cleanup loop after the call or when an error is triggered.
This patch depends on following commits:
* 959171376 "BUG/MINOR: arg: Fix leaks during arguments validation for fetches/converters"
* fdea1b631 "MINOR: hlua: Don't needlessly copy lua strings in trash during args validation"
It may be backported to all supported versions, most probably as far as 2.1
only.
Lua strings are NULL terminated. So in the hlua_lua2arg_check() function, used
to check arguments against the sample fetches specification, there is no reason
to copy these strings in a trash to add a terminating null byte.
In addition, when the array of arguments is built from lua values, we must take
care to count this terminating null bytes in the size of the buffer where a
string is stored. The same must be done when a sample is built from a lua value.
This patch may be backported to easy backports.
In hlua_lua2arg_check() function, before converting an argument to an IPv4 or
IPv6 mask, we must be sure to have an integer or a string argument (ARGT_SINT or
ARGT_STR).
This patch must be backported to all supported versions.
In hlua_lua2arg_check() function, before converting a string to an IP address,
we must be to sure to have a string argument (ARGT_STR).
This patch must be backported to all supported versions.
Some sample fetches or sample converters uses a validation functions for their
arguments. In these function, string arguments (ARGT_STR) may be converted to
another type (for instance a regex, a variable or a integer). Because these
strings are allocated when the argument list is built, they must be freed after
a conversion. Most of time, it is done. But not always. This patch fixes these
minor memory leaks (only on few strings, during the configuration parsing).
This patch may be backported to all supported versions, most probably as far as
2.1 only. If this commit is backported, the previous one 73292e9e6 ("BUG/MINOR:
lua: Duplicate map name to load it when a new Map object is created") must also
be backported. Note that some validation functions does not exists on old
version. It should be easy to resolve conflicts.
When a new map is created, the sample_load_map() function is called. To do so,
an argument array is created with the name as first argument. Because it is a
lua string, owned by the lua, it must be duplicated. The sample_load_map()
function will convert this argument to a map. In theory, after the conversion,
it must release the original string. It is not performed for now and it is a bug
that will be fixed in the next commit.
This patch may be backported to all supported versions, most probably as far as
2.1 only. But it must be backported with the next commit "BUG/MINOR: arg: Fix
leaks during arguments validation for fetches/converters".
