numbers of active and backup servers per backend were exported but the info
was not exported per-server. The main issue to do so was we were unable to
have a different name for the same metric in a different scope. Thanks to
the previous patch ("MINOR: promex: Add support for specialized
front/back/li/srv metric names") it is now possible. So the info is now
exported per-server.
This patch should fix the issue #2271.
Depending on the scope, metrics can have different names. For instance, the
number of active/backend servers are reported with
"haproxy_backend_active_servers"/"haproxy_backend_backup_servers" metric names
in the backend scope while it should be
"haproxy_server_active"/"haproxy_server_backup" in the server scope.
To be able to support different names depending on the scope for the same
metric, arrays of ISTs were added, one by scope (front, back, listen,
server). These arrays only contain names overriding the default ones.
Note: the exemple above is not supported for now and is the reason for this
commit.
When 'log' directive was implemented, the internal representation was
named 'struct logsrv', because the 'log' directive would directly point
to the log target, which used to be a (UDP) log server exclusively at
that time, hence the name.
But things have become more complex, since today 'log' directive can point
to ring targets (implicit, or named) for example.
Indeed, a 'log' directive does no longer reference the "final" server to
which the log will be sent, but instead it describes which log API and
parameters to use for transporting the log messages to the proper log
destination.
So now the term 'logsrv' is rather confusing and prevents us from
introducing a new level of abstraction because they would be mixed
with logsrv.
So in order to better designate this 'log' directive, and make it more
generic, we chose the word 'logger' which now replaces logsrv everywhere
it was used in the code (including related comments).
This is internal rewording, so no functional change should be expected
on user-side.
When a server is in maintenance, the check.status is no longer updated.
Therefore, we shouldn't consider check.status if the checks are not active. This
check was properly implemented in the haproxy_server_check_status metric, but
wasn't carried over to backend_agg_check_status, which introduced
inconsistencies between the two metrics.
[cf: This patch must be backported as far as 2.4]
Now that we have free_acl_cond(cond) function that does cond prune then
frees cond, replace all occurences of this pattern:
| prune_acl_cond(cond)
| free(cond)
with:
| free_acl_cond(cond)
sc_need_room() now takes the required free space to receive more data as
parameter. All calls to this function are updated accordingly. For now, this
value is set but not used. When we are waiting for a buffer, 0 is used. So
we expect to be unblocked ASAP. However this must be reviewed because
SC_FL_NEED_BUF is probably enough in this case and this flag is already set
if the input buffer allocation fails.
This reverts commit aadcfc9ea6.
The parts affecting the DeviceAtlas addon were wrong actually, the
"now" variable was a local time_t in a file that's not compiled with
the haproxy binary (dadwsch). Only the fix to the calltrace is correct,
so better revert and fix the only one in a separate commit. No backport
is needed.
The filter was using "now" in visible output in debug mode, that's
not correct, we should rather use "date" since it's visible. No
backport is needed as it was mostly emphasized by commit 28360dc
("MEDIUM: clock: force internal time to wrap early after boot")
in 2.8..
Since commit 28360dc ("MEDIUM: clock: force internal time to wrap early
after boot") we have a much clearer distinction between 'now' (the internal,
drifting clock) and 'date' (the wall clock time). There were still a few
places where 'now' was being used for human consumption.
No backport is needed.
In flt_ot_sample_to_str() there were two occurrences of strncat() which
are used to copy N chars from the source and append a zero. For the sake
of definitely getting rid of this nasty function let's replace them by
memcpy() instead. It's worth noting that the length test there appeared
to be incorrect as it didn't make provisions for the trailing zero,
unless the size argument doesn't take it into account (seems unlikely).
Nothing was changed regarding this. If the code was good, it still is,
otherwise if it was bad it still is. At least this is more obvious now
than when using a function that needs n+1 chars to work.
Thanks to the previous patch, it is now possible for applets to not set the
CF_EOI flag on the channels. On this point, the applets get closer to the
muxes.
It was done by hand by callers when a shutdown for read or write was
performed. It is now always handled by the functions performing the
shutdown. This way the callers don't take care of it. This will avoid some
bugs.
When the promex applet triggers an error, for instance because the URI is
invalid, we must still take care to consume the request. Otherwise, the
error will be handled by HTTP analyzers as a server abort.
This patch must be backported as far as 2.0.
CF_READ_NULL flag is not really useful and used. It is a transient event
used to wakeup the stream. As we will see, all read events on a channel may
be resumed to only one and are all used to wake up the stream.
In this patch, we introduce CF_READ_EVENT flag as a replacement to
CF_READ_NULL. There is no breaking change for now, it is just a
rename. Gradually, other read events will be merged with this one.
It happens that a few "if USE_foo" were placed too low in the makefile,
and would mostly work by luck thanks to not using variables that were
already referenced before. The opentracing include is even trickier
because it extends OPTIONS_CFLAGS that was last read a few lines before
being included, but it only works because COPTS is defined as a macro and
not a variable, so it will be evaluated later. At least now it doesn't
touch OPTIONS_* anymore and since it's cleanly arranged, it will work by
default via the flags collector.
Let's just move these late USE_* handlers upper and place a visible
delimiter after them reminding not to add any after.
With gcc-11.2 and binutils-2.37 I'm getting link errors due to multiply
defined symbols when enabling USE_51DEGREES_V4. This is caused by two
variables being present in hash.h instead of hash.c, hence they're
defined twice.
This patch just moves them to hash.c and turns their declaration to
extern.
No backport is needed since this was introduced in 2.8-dev.
"haproxy_backend_agg_server_status" and "haproxy_backend_agg_check_status"
were not referenced in promex README.
"haproxy_backend_agg_server_check_status" is also missing but it is a
deprecated metric. Thus, it is better to not reference it.
This patch introduces haproxy_backend_agg_check_status metric
as we wanted in 42d7c402d but with the right data source.
This patch could be backported as far as 2.4.
haproxy_backend_agg_server_check_status currently aggregates
haproxy_server_status instead of haproxy_server_check_status.
We deprecate this and create a new one,
haproxy_backend_agg_server_status to clarify what it really
does.
This patch could be backported as far as 2.4.
This clarifies that LGPL is also permitted for the wurfl.h dummy file.
Should be backported where relevant.
Signed-off-by: Luca Passani <luca.passani@scientiamobile.com>
This patch also adds a set of new global options:
- 51degrees-use-performance-graph { on | off }
- 51degrees-use-predictive-graph { on | off }
- 51degrees-drift <number>
- 51degrees-difference <number>
- 51degrees-allow-unmatched { on | off }
To build using the latest 51Degrees V4 engine with Hash algorithm, set
USE_51DEGREES_V4=1.
Other supported build options are 51DEGREES_INC, 51DEGREES_LIB and
51DEGREES_SRC which needs to be set to the directory that contains
headers and C files. For example:
make TARGET=<target> USE_51DEGREES_V4=1 51DEGREES_SRC='51D_REPO_PATH'/src
Rename CLI_ST_PRINT_FREE to CLI_ST_PRINT_DYNERR.
Most notably, this highlights that this is reserved to error printing.
This is done to ensure consistency between CLI_ST_PRINT/CLI_ST_PRINT_DYN
and CLI_ST_PRINT_ERR/CLI_ST_PRINT_DYNERR. The name is also consistent
with the function cli_dynerr() which activates it.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
The new name mor eclearly indicates that a stream connector cannot make
any more progress because it needs room in the channel buffer, or that
it may be unblocked because the buffer now has more room available. The
testing function is sc_waiting_room(). This is mostly used by applets.
Note that the flags will change soon.
These functions return the app-layer associated with an stconn, which
is a check, a stream or a stream's task. They're used a lot to access
channels, flags and for waking up tasks. Let's just name them
appropriately for the stream connector.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This also follows the natural naming. There are roughly 238 changes, all
totally trivial. conn_stream-t.h has become completely void of any
"conn_stream" related stuff now (except its name).
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
Now at least it makes it obvious that it's the stream endpoint descriptor
and not an endpoint. There were few changes thanks to the previous refactor
of the flags.
This changes all main uses of endp->flags to the se_fl_*() equivalent
by applying coccinelle script endp_flags.cocci. The se_fl_*() functions
themselves were manually excluded from the change, of course.
Note: 144 locations were touched, manually reviewed and found to be OK.
The script was applied with all includes:
spatch --in-place --recursive-includes -I include --sp-file $script $files
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
The few applets that set CS_EP_EOI or CS_EP_ERROR used to set it on the
endpoint retrieved from the conn_stream while it's already available on
the appctx itself. Better use the appctx one to limit the unneeded
interactions between the two sides.
Now that the CLI's print context is alone in the appctx, it's possible
to refine the appctx's ctx layout so that the cli part matches exactly
a regular svcctx, and as such move the CLI context into an svcctx like
other applets. External code will still build and work because the
struct cli perfectly maps onto the struct cli_print_ctx that's located
into svc.storage. This is of course only to make a smooth transition
during 2.6 and will disappear immediately after.
A tiny change had to be applied to the opentracing addon which performs
direct accesses to the CLI's err pointer in its own print function. The
rest uses the standard cli_print_* which were the only ones that needed
a small change.
The whole "ctx.cli" struct could be tagged as deprecated so that any
possibly existing external code that relies on it will get build
warnings, and the comments in the struct are pretty clear about the
way to fix it, and the lack of future of this old API.
Now that we have out own context, there's no need to use the cryptic st2
struct member. It's solely used to carry a field number here, so let's
add this into the context.
The prometheus applet used to map to the stats context since it was not
convenient to have one's own context, and to reuse the fields with its
own values and enums. The obj1 pointer was used both for proxies and
stick-tables; obj2 was used both for servers and listeners.
This change makes use of the generic command context allocation so that
the there's now a properly typed context for prometheus, defined in the
code itself and independent on the stats or appctx ones. For clarity,
the types are correctly set and there's one proxy, one table, one server
and one listener. Some could be compacted using unions but that's not
necessary since the context is reasonably compact. The stats' st_code
field was used as the object state so the new field name is obj_state.
An attempt was made to change the types to const for what us only visited
but some calls pass through the stats code to retrieve info and that code
uses non-const variables due to internal API limitations (read_freq_ctr()
being used and requiring variable). That could change in the future,
though.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
All old flags CS_FL_* are now moved in the endpoint scope and renamed
CS_EP_* accordingly. It is a systematic replacement. There is no true change
except for the health-check and the endpoint reset. Here it is a bit special
because the same conn-stream is reused. Thus, we must handle endpoint
allocation errors. To do so, cs_reset_endp() has been adapted.
Thanks to this last change, it will now be possible to simplify the
multiplexer and probably the applets too. A review must also be performed to
remove some flags in the channel or the stream-interface. The HTX will
probably be simplified too. Finally, there is now some place in the
conn-stream to move info from the stream-interface.
