There are some situations where we need to wait for the other side to
be connected. None of the current blocking flags support this. It used
to work more or less by accident using the old flags. Let's add a new
flag to mention we're blocking on this, it's removed by si_chk_rcv()
when a connection is established. It should be enough for now.
The master is not supposed to run (at the moment) any task before the
polling loop, the created tasks should be run only in the workers but in
the master they should be disabled or removed.
No backport needed.
To ease the fast forwarding and the infinte forwarding on HTX proxies, 2
functions have been added to let the channel be almost aware of the way data are
stored in its buffer. By calling these functions instead of legacy ones, we are
sure to forward the right amount of data.
Now, the function htx_from_buf() will set the buffer's length to its size
automatically. In return, the caller should call htx_to_buf() at the end to be
sure to leave the buffer hosting the HTX message in the right state. When the
caller can use the function htxbuf() to get the HTX message without any update
on the underlying buffer.
The small HTX overhead is enough to make the system perform multiple
reads and unaligned memory copies. Here we provide a function whose
purpose is to reduce the apparent room in a buffer by the size of the
overhead for DATA blocks, which is the struct htx plus 2 blocks (one
for DATA, one for the end of message so that small blocks can fit at
once). The muxes using HTX will be encouraged to use this one instead
of b_room() to compute the available buffer room and avoid filling
their demux buf with more data than can fit at once into the HTX
buffer.
This one is used a lot during transfers, let's avoid resetting its
size when there are already data in the buffer since it implies the
size is correct.
Add a new keyword for servers, "idle-timeout". If set, unused connections are
kept alive until the timeout happens, and will be picked for reuse if no
other connection is available.
Add a new method to muxes, "max_streams", that returns the max number of
streams the mux can handle. This will be used to know if a mux is in use
or not.
We currently have conn_get_best_mux() to return the best mux for a
given protocol name, side and proxy mode. But we need the mux entry
as well in order to fix the bind_conf and servers at the end of the
config parsing. Let's split the function in two parts. It's worth
noting that the <conn> argument is never used anymore so this part
is eligible to some cleanup.
Till now we could only produce an HTTP/1 request from a list of H2
request headers. Now the new function h2_make_htx_request() does the
same but using the HTX encoding instead, while respecting the H2
semantics. The code is not much different from the first version,
only the encoding differs.
For now it's not used.
First, to be called on HTX streams, a filter must explicitly be declared as
compatible by setting the flag STRM_FLT_FL_HAS_FILTERS on the filter's config at
HAProxy startup. This flag is checked when a filter implementation is attached
to a stream.
Then, some changes have been made on HTTP callbacks. The callback http_payload
has been added to filter HTX data. It will be called on HTX streams only. It
replaces the callbacks http_data, http_chunk_trailers and http_forward_data,
called on legacy HTTP streams only and marked as deprecated. The documention
(once updated)) will give all information to implement this new callback. Other
HTTP callbacks will be called for HTX and HTTP legacy streams. So it is the
filter's responsibility to known which kind of data it handles. The macro
IS_HTX_STRM should be used in such cases.
There is at least a noticeable changes in the way data are forwarded. In HTX,
after the call to the callback http_headers, all the headers are considered as
forwarded. So, in http_payload, only the body and eventually the trailers will
be filtered.
First of all, an dedicated error snapshot, h1_snapshot, has been added. It
contains more or less the some info than http_snapshot but adapted for H1
messages. Then, the function h1_capture_bad_message() has been added to capture
bad H1 messages. And finally, the function h1_show_error_snapshot() is used to
dump these errors. Only Headers or data parsing are captured.
During startup, after the configuration parsing, all HTTP error messages
(errorloc, errorfile or default messages) are converted into HTX messages and
stored in dedicated buffers. We use it to return errors in the HTX analyzers
instead of using ugly OOB blocks.
Instead, we now use the htx_sl coming from the HTX message. It avoids to have
too H1 specific code in version-agnostic parts. Of course, the concept of the
start-line is higly influenced by the H1, but the structure htx_sl can be
adapted, if necessary. And many things depend on a start-line during HTTP
analyzis. Using the structure htx_sl also avoid boring conversions between HTX
version and H1 version.
If there is no start-line, this offset is set to -1. Otherwise, it is the
relative address where the start-line is stored in the data block. When the
start-line is added, replaced or removed, this offset is updated accordingly. On
remove, if the start-line is no set and if the next block is a start-line, the
offset is updated. Finally, when an HTX structure is defragmented, the offset is
also updated accordingly.
The HTX start-line is now a struct. It will be easier to extend, if needed. Same
info can be found, of course. In addition it is now possible to set flags on
it. It will be used to set some infos about the message.
Some macros and functions have been added in proto/htx.h to help accessing
different parts of the start-line.
The function htx_find_blk() returns the HTX block containing data with a given
offset, relatively to the beginning of the HTX message. It is a good way to skip
outgoing data and find the first HTX block not already processed.
the functions htx_get_next() and htx_get_prev() are used to iterate on an HTX
message using blocks position. With htx_get_next_blk() and htx_get_prev_blk(),
it is possible to do the same, but with HTX blocks. Of course, internally, we
rely on position's versions to do so. But it is handy for callers to not take
care of the blocks position.
The function htx_add_data_before() can be used to add an HTX block before
another one. For instance, it could be used to add some data before the
end-of-message marker.
Time to time, the need arises to get some info owned by the multiplexer about a
connection stream from the upper layer. Today we really need to get some dates
and durations specific to the conn_stream. It is only true for the mux H1 and
H2. Otherwise it will be impossible to have correct times reported in the logs.
To do so, the structure cs_info has been defined to provide all info we ever
need on a conn_stream from the upper layer. Of course, it is the first step. So
this structure will certainly envloved. But for now, only the bare minimum is
referenced. On the mux side, the callback get_cs_info() has been added in the
structure mux_ops. Multiplexers can now implement it, if necessary, to return a
pointer on a structure cs_info. And finally, the function si_get_cs_info()
should be used from the upper layer. If the stream interface is not attached to
a connection stream, this function returns NULL, likewise if the callback
get_cs_info() is not defined for the corresponding mux.
htx_cut_data_blk() is used to cut the beginning of a DATA block after a
part of it was tranferred. It simply advances the address, reduces the
advertised length and updates the htx's total data count.
It looks like we forgot to report HTX when listing the muxes and their
respective protocols, leading to "NONE" being displayed. Let's report
"HTX" and "HTTP|HTX" since both will exist. Also fix a minor typo in
the output message.
Instead of just storing the last connection in the session, store all of
the connections, for at most MAX_SRV_LIST (currently 5) targets.
That way we can do keepalive on more than 1 outgoing connection when the
client uses HTTP/2.
Having a thread_local for the pool cache is messy as we need to
initialize all elements upon startup, but we can't until the threads
are created, and once created it's too late. For this reason, the
allocation code used to check for the pool's initialization, and
it was the release code which used to detect the first call and to
initialize the cache on the fly, which is not exactly optimal.
Now that we have initcalls, let's turn this into a per-thread array.
This array is initialized very early in the boot process (STG_PREPARE)
so that pools are always safe to use. This allows to remove the tests
from the alloc/free calls.
Doing just this has removed 2.5 kB of code on all cumulated pool_alloc()
and pool_free() paths.
signal_init(), init_log(), init_stream(), and init_task() all used to
only preset some values and lists. This needs to be done very early to
provide a reliable interface to all other users. The calls used to be
explicit in haproxy.c:init(). Now they're placed in initcalls at the
STG_PREPARE stage. The functions are not exported anymore.
Instead of exporting a number of pools and having to manually delete
them in deinit() or to have dedicated destructors to remove them, let's
simply kill all pools on deinit().
For this a new function pool_destroy_all() was introduced. As its name
implies, it destroys and frees all pools (provided they don't have any
user anymore of course).
This allowed to remove 4 implicit destructors, 2 explicit ones, and 11
individual calls to pool_destroy(). In addition it properly removes
the mux_pt_ctx pool which was not cleared on exit (no backport needed
here since it's 1.9 only). The sig_handler pool doesn't need to be
exported anymore and became static now.
This commit replaces the explicit pool creation that are made in
constructors with a pool registration. Not only this simplifies the
pools declaration (it can be done on a single line after the head is
declared), but it also removes references to pools from within
constructors. The only remaining create_pool() calls are those
performed in init functions after the config is parsed, so there
is no more user of potentially uninitialized pool now.
It has been the opportunity to remove no less than 12 constructors
and 6 init functions.
The new function create_pool_callback() takes 3 args including the
return pointer, and creates a pool with the specified name and size.
In case of allocation error, it emits an error message and returns.
The new macro REGISTER_POOL() registers a callback using this function
and will be usable to request some pools creation and guarantee that
the allocation will be checked. An even simpler approach is to use
DECLARE_POOL() and DECLARE_STATIC_POOL() which declare and register
the pool.
Most calls to hap_register_post_check(), hap_register_post_deinit(),
hap_register_per_thread_init(), hap_register_per_thread_deinit() can
be done using initcalls and will not require a constructor anymore.
Let's create a set of simplified macros for this, called respectively
REGISTER_POST_CHECK, REGISTER_POST_DEINIT, REGISTER_PER_THREAD_INIT,
and REGISTER_PER_THREAD_DEINIT.
Some files were not modified because they wouldn't benefit from this
or because they conditionally register (e.g. the pollers).
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
Using __decl_spinlock(), __decl_rwlock(), __decl_aligned_spinlock()
and __decl_aligned_rwlock(), one can now simply declare a spinlock
or an rwlock which will automatically be initialized at boot time
by calling the ha_spin_init() or ha_rwlock_init() callback. The
"aligned" variants enforce a 64-byte alignment on the lock.
This patch adds ha_spin_init() and ha_rwlock_init() which are used as
a callback to initialise locks at boot time. They perform exactly the
same as HA_SPIN_INIT() or HA_RWLOCK_INIT() but from within a real
function.
We currently have to deal with multiple initialization stages in a way
that can be confusing, because certain parts rely on others having been
properly initialized. Most calls consist in adding lists to existing
lists, whose heads are initialized in the declaration so this is easy.
But some calls create new pools and require pools to be properly
initialized. Pools currently are thread-local and as such cannot be
pre-initialized, requiring run-time checks.
All this could be simplified by using multiple boot stages and allowing
functions to be registered at various stages.
One approach might be to use gcc's constructor priorities, but this
requires gcc >= 4.3 which eliminates a wide spectrum of working compilers,
and some versions of certain compilers (like clang 3.0) are known for
silently ignore these priorities.
Instead we can use our own init function registration mechanism. A first
attempt was made using register_function() calls in all constructors but
this made the code more painful.
This patch's approach is different. It creates sections containing
arrays of pointers to "initcall" descriptors. An initcall contains a
pointer to a function and an argument. Each section corresponds to a
specific initialization stage. Each module creates such descriptors
for various calls it requires. The main() function starts by scanning
each of these sections in turn to process these initcalls.
This will make it possible to remove many constructors from various
modules, by simply placing initcalls for the requested functions next
to the keyword lists that need to be called.
A first attempt was made by placing the initcalls directly into the
sections instead of creating an array of pointers, but it becomes
sensitive to the array's alignment which depends on the compiler and
the linker, so it seems too fragile.
For now we support 6 init stages :
- STG_PREPARE : preset variables, tables and list heads
- STG_LOCK : initialize spinlocks and rwlocks
- STG_ALLOC : allocate the required structures
- STG_POOL : create pools
- STG_REGISTER : register static lists (keywords etc)
- STG_INIT : subsystems normal initialization
These ones are declared directly in the files where they are needed
using one of the INITCALL* macros, passing 0 to 3 pointers as
arguments.
The API should possibly be extended to support a return value to give
a status to the caller, and to support a unified API, possibly a bit
more flexibility in the arguments. In this case it might make sense to
support a set of macros to register functions having a different API
and to pass the function type in the initcall itself.
Special thanks to Olivier for showing how to scan sections as this is
not something particularly well documented and exactly what I've been
missing to achieve this.
Building with musl and gcc-5.3 for MIPS returns this :
include/common/buf.h: In function 'b_dist':
include/common/buf.h:252:2: error: unknown type name 'ssize_t'
ssize_t dist = to - from;
^
Including stdint or stddef is not sufficient there to get ssize_t,
unistd is needed as well. It's likely that other platforms will have
the same issue. This patch also addresses it in ist.h and memory.h.
Building on 32 bits gives this :
include/proto/htx.h: In function 'htx_dump':
include/proto/htx.h:443:25: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
fprintf(stderr, "htx:%p [ size=%u - data=%u - used=%u - wrap=%s - extra=%lu]\n",
^
In htx_dump(), fprintf() uses %lu but the value is an uint64_t so it
doesn't match on 32-bit. Let's cast this to unsigned long long and use
%llu instead.
When we create a connection, if we have to defer the conn_stream and the
mux creation until we can decide it (ie until the SSL handshake is done, and
the ALPN is decided), store the connection in the stream_interface, so that
we're sure we can destroy it if needed.
If an ALPN (or a NPN) was chosen for a server, defer choosing the mux until
after the SSL handshake is done, and the ALPN/NPN has been negociated, so
that we know which mux to pick.
In some situations, especially when dealing with low latency on processors
supporting a variable frequency or when running inside virtual machines,
each time the process waits for an I/O using the poller, the processor
goes back to sleep or is offered to another VM for a long time, and it
causes excessively high latencies.
A solution to this provided by this patch is to enable busy polling using
a global option. When busy polling is enabled, the pollers never sleep and
loop over themselves waiting for an I/O event to happen or for a timeout
to occur. On multi-processor machines it can significantly overheat the
processor but it usually results in much lower latencies.
A typical test consisting in injecting traffic over a single connection at
a time over the loopback shows a bump from 4640 to 8540 connections per
second on forwarded connections, indicating a latency reduction of 98
microseconds for each connection, and a bump from 12500 to 21250 for
locally terminated connections (redirects), indicating a reduction of
33 microseconds.
It is only usable with epoll and kqueue because select() and poll()'s
API is not convenient for such usages, and the level of performance they
are used in doesn't benefit from this anyway.
The option, which obviously remains disabled by default, can be turned
on using "busy-polling" in the global section, and turned off later
using "no busy-polling". Its status is reported in "show info" to help
troubleshooting suspicious CPU spikes.
Right now we measure for each task the cumulated time spent waiting for
the CPU and using it. The timestamp uses a 64-bit integer to report a
nanosecond-level date. This is only enabled when "profiling.tasks" is
enabled, and consumes less than 1% extra CPU on x86_64 when enabled.
The cumulated processing time and wait time are reported in "show sess".
The task's counters are also reset when an HTTP transaction is reset
since the HTTP part pretends to restart on a fresh new stream. This
will make sure we always report correct numbers for each request in
the logs.
This is a new global setting which enables or disables CPU profiling
per task. For now it only sets/resets the variable based on the global
option "profiling.tasks" and supports showing it as well as setting it
from the CLI using "show profiling" and "set profiling". The option will
be used by a future commit. It was done in a way which should ease future
addition of profiling options.
Since we know the time it takes to process everything between two poll()
calls, we can use this as the max latency measurement any task will
experience and average it.
This code does this, and reports in "show activity" the average of this
loop time over the last 1024 poll() loops, for each thread. It will vary
quickly at high loads and slowly under low to moderate loads, depending
on the rate at which poll() is called. The latency a task experiences
is expected to be half of this on average.
At the moment the situation with activity measurement is quite tricky
because the struct activity is defined in global.h and declared in
haproxy.c, with operations made in time.h and relying on freq_ctr
which are defined in freq_ctr.h which itself includes time.h. It's
barely possible to touch any of these files without breaking all the
circular dependency.
Let's move all this stuff to activity.{c,h} and be done with it. The
measurement of active and stolen time is now done in a dedicated
function called just after tv_before_poll() instead of mixing the two,
which used to be a lazy (but convenient) decision.
No code was changed, stuff was just moved around.
Just found that proto/cli.h doesn't build if types/cli.h is not also
included by the caller, as it uses cli_kw_list is used in arguments.
But it's also true for a few other ones like mworker_proc, stream,
and channel, so let's fix this.
The new function signal_unregister() removes every handlers assigned to
a signal. Once the handler list of the signal is empty, the signal is
ignored with SIG_IGN.
In the output of 'show fd', the worker CLI's socketpair was still
handled by an "unknown" function. That can be really confusing during
debug. Fixed it by showing "mworker_accept_wrapper" instead.
The mworker waitpid mode (which is used when a reload failed to apply
the new configuration) was still using a specific initialisation path.
That's a problem since we use a polling loop in the master now, the
master proxy is not initialized and the master CLI is not activated.
This patch removes the initialisation code of the wait mode and
introduce the MODE_MWORKER_WAIT in order to use the same init path as
the MODE_MWORKER with some exceptions. It allows to use the master proxy
and the master CLI during the waitpid mode.
This was the largest function of the whole file, taking a rough second
to build alone. Let's move it to a distinct file along with a few
dependencies. Doing so saved about 2 seconds on the total build time.
The config parser is the largest file to build and its build dominates
the total project's build time. Let's start to split it into multiple
smaller pieces by extracting the "global" section parser into a new
file called "cfgparse-global.c". This removes 1/4th of the file's build
time.
It does the same than smp_prefetch_http but for HTX messages. It can be called
from an HTTP proxy or a TCP proxy. For HTTP proxies, the parsing is handled by
the mux, so it does nothing but wait. For TCP proxies, it tries to parse an HTTP
message and to convert it in a temporary HTX message. Sample fetches will use
this temporary variable to do their job.
It is more or less the same than legacy version but adapted to be called from
HTX analyzers. In the legacy version of this function, we switch on the HTX code
when applicable.
It is more or less the same than legacy version but adapted to be called from
HTX analyzers. In the legacy version of this function, we switch on the HTX code
when applicable.
It is more or less the same than legacy versions but adapted to be called from
HTX analyzers. In the legacy versions of these functions, we switch on the HTX
code when applicable.
It is more or less the same than legacy versions but adapted to be called from
HTX analyzers. In the legacy versions of these functions, we switch on the HTX
code when applicable.
This file will host all functions to manipulate HTTP messages using the HTX
representation. Functions in this file will be able to be called from anywhere
and are mainly related to the HTTP semantics.
The internal representation of an HTTP message, called HTX, is a structured
representation, unlike the old one which is a raw representation of
messages. Idea is to have a version-agnostic representation of the HTTP
messages, which can be easily used by to handle HTTP/1, HTTP/2 and hopefully
QUIC messages, and communication from one of them to another.
In this patch, we add types to define the internal representation itself and the
main functions to manipulate them.
Now, the connection mode is detected in the mux and not in HTX analyzers
anymore. Keep-alive connections are now managed by the mux. A new stream is
created for each transaction. This removes the most important part of the
synchronization between channels and the HTTP transaction cleanup. These changes
only affect the HTX part (proto_htx.c). Legacy HTTP analyzers remain untouched
for now.
On the client-side, the mux is responsible to create new streams when a new
request starts. It is also responsible to parse and update the "Connection:"
header of the response. On the server-side, the mux is responsible to parse and
update the "Connection:" header of the request. Muxes on each side are
independent. For now, there is no connection pool on the server-side, so it
always close the server connection.
For now, these analyzers are just copies of the legacy HTTP analyzers. But,
during the HTTP refactoring, it will be the main place where it will be
visible. And in legacy analyzers, the macro IS_HTX_STRM is used to know if the
HTX version should be called or not.
Note: the following commits were applied to proto_http.c after this patch
was developed and need to be studied to see if an adaptation to htx
is required :
fd9b68c BUG/MINOR: only mark connections private if NTLM is detected
To prepare the refactoring of the code handling HTTP messages, these macros will
help to use HTX functions instead of legacy ones when the new HTX internal
representation is in use. To do so, for a given stream, we will check if its
frontend has the option PR_O2_USE_HTX. It is useless to test backend options
because it is not possible to mix the HTX representation and the legacy one
(i.e, having an HTX frontend and a legacy backend or vice versa).
The flag CS_FL_READ_PARTIAL can be set by the mux on the conn_stream to notify
the stream interface that some data were received. Is is used in si_cs_recv to
re-arm read timeout on the channel.
These 2 functions are pretty naive. They only split a start-line into its 3
substrings or a header line into its name and value. Spaces before and after
each part are skipped. No CRLF at the end are expected.
By setting the flag CO_RFL_KEEP_RSV when calling mux->rcv_buf, the
stream-interface notifies the mux it must keep some space to preserve the
buffer's reserve. This flag is only useful for multiplexers handling structured
data, because in such case, the stream-interface cannot know the real amount of
free space in the channel's buffer.
By setting the flag CO_RFL_BUF_FLUSH when calling mux->rcv_buf, the
stream-interface notifies the mux it should flush its buffers without reading
more data. This flag is set when the SI want to use the kernel TCP splicing to
forward data. Of course, the mux can respect it or not, depending on its
state. It's just an information.
Do not destroy the connection when we're about to destroy a stream. This
prevents us from doing keepalive on server connections when the client is
using HTTP/2, as a new stream is created for each request.
Instead, the session is now responsible for destroying connections.
When reusing connections, the attach() mux method is now used to create a new
conn_stream.
Introduce a new field in session, "srv_conn", and a linked list of sessions
in the connection. It will be used later when we'll switch connections
from being managed by the stream, to being managed by the session.
Add a new method for mux, avail_streams, that returns the number of streams
still available for a mux.
For the mux_pt, it'll return 1 if the connection is in idle, or 0. For
the H2 mux, it'll return the max number of streams allowed, minus the number
of streams currently in use.
Remaining calls to si_cant_put() were all for lack of room and were
turned to si_rx_room_blk(). A few places where SI_FL_RXBLK_ROOM was
cleared by hand were converted to si_rx_room_rdy().
The now unused si_cant_put() function was removed.
The channel can disable reading from the stream-interface using various
methods, such as :
- CF_DONT_READ
- !channel_may_recv()
- and possibly others
Till now this was done by mangling SI_FL_RX_WAIT_EP which is not
appropriate at all since it's not the stream interface which decides
whether it wants to deliver data or not. Some places were also wrongly
relying on SI_FL_RXBLK_ROOM since it was the only other alternative,
but it's not suitable for CF_DONT_READ.
Let's use the SI_FL_RXBLK_CHAN flag for this instead. It will properly
prevent the stream interface from being woken up and reads from
subscribing to more receipt without being accidently removed. It is
automatically reset if CF_DONT_READ is not set in stream_int_notify().
The code is not trivial because it splits the logic between everything
related to buffer contents (channel_is_empty(), CF_WRITE_PARTIAL, etc)
and buffer policy (CF_DONT_READ). Also it now needs to decide timeouts
based on any blocking flag and not just SI_FL_RXBLK_ROOM anymore.
It looks like this patch has caused a minor performance degradation on
connection rate, which possibly deserves being investigated deeper as
the test conditions are uncertain (e.g. slightly more subscribe calls?).
Till now we were using si_done_put() upon shutr, but these flags could
be reset upon next activity. Now let's switch to SI_FL_RXBLK_SHUT which
doesn't go away. It's also set in stream_int_update() in case a shutr
condition is detected.
The now unused si_done_put() was removed.
Instead of checking complex conditions to call si_cs_recv() upon first
call, let's simply use si_rx_endp_ready() now that si_cs_recv() reports
it accurately, and add si_rx_blocked() to cover any blocking situation.
The stream interface used to conflate a missing buffer and lack of
buffer space into SI_FL_WAIT_ROOM but this causes difficulties as
these cannot be checked at the same moment and are not resolved at
the same moment either. Now we instead mark the buffer as presumably
available using si_rx_buff_rdy() and mark it as unavailable+requested
using si_rx_buff_blk().
The call to si_alloc_buf() was moved after si_stop_put(). This makes
sure that the SI_FL_RX_WAIT_EP flag is cleared on allocation failure so
that the function is called again if the callee fails to do its work.
The SI_FL_WANT_PUT flag is used in an awkward way, sometimes it's
set by the stream-interface to mean "I have something to deliver",
sometimes it's cleared by the channel to say "I don't want you to
send what you have", and it has to be set back once CF_DONT_READ
is cleared. This will have to be split between SI_FL_RX_WAIT_EP
and SI_FL_RXBLK_CHAN. This patch only replaces all uses of the
flag with its natural (but negated) replacement SI_FL_RX_WAIT_EP.
The code is expected to be strictly equivalent. The now unused flag
was completely removed.
The first ones are used to figure if a direction is blocked on the
stream interface for anything but the end point. The second ones are
used to detect if the end point is ready to receive/transmit. They
should be used instead of directly fiddling with the existing bits.
The plan is to have the following flags to describe why a stream interface
doesn't produce data :
- SI_FL_RXBLK_CHAN : the channel doesn't want it to receive
- SI_FL_RXBLK_BUFF : waiting for a buffer allocation to complete
- SI_FL_RXBLK_ROOM : more room is required in the channel to receive
- SI_FL_RXBLK_SHUT : input now closed, nothing new will come
- SI_FL_RX_WAIT_EP : waiting for the endpoint to produce more data
Applets like the CLI which consume complete commands at once and produce
large chunks of responses will for example be able to stop being woken up
by clearing SI_FL_WANT_GET and setting SI_FL_RXBLK_ROOM when the rx buffer
is full. Once called they will unblock WANT_GET. The flags were moved
together in readable form with the Rx bits using 2 hex digits and still
have some room to do a similar operation on the Tx path later, with the
WAIT_EP flag being represented alone on a digit.
This flag is not enough to describe all blocking situations, as can be
seen in each case we remove it. The muxes has taught us that using multiple
blocking flags in parallel will be much easier, so let's start to do this
now. This patch only renames this flags in order to make next changes more
readable.
We used to have enough of 16 bits, with 3 still available but it's
not possible to add the rx/tx blocking bits there. Let's extend the
format to 32 bits and slightly reorder the fields to maintain the
struct size to 64 bytes. Nothing else was changed.
This method is used to retrieve the first known good conn_stream from
the mux. It will be used to find the other end of a connection when
dealing with the proxy protocol for example.
There are still some unwelcome synchronous calls to si_cs_recv() in
process_stream(). Let's have a new function si_sync_recv() to perform
a synchronous receive call on a stream interface regardless of the type
of its endpoint, and move these calls there. For now it only implements
conn_streams since it doesn't seem useful to support applets there. The
function implements an extra check for the stream interface to be in an
established state before attempting anything.
An unstoppable listener is a listener which won't be stop during a soft
stop. The unstoppable_jobs variable is incremented and the listener
won't prevent the process to leave properly.
It is not a good idea to use this feature (the LI_O_NOSTOP flag) with a
listener that need to be bind again on another process during a soft
reload.
This patch allows a process to properly quit when some jobs are still
active, this feature is handled by the unstoppable_jobs variable, which
must be atomically incremented.
During each new iteration of run_poll_loop() the break condition of the
loop is now (jobs - unstoppable_jobs) == 0.
The unique usage of this at the moment is to handle the socketpair CLI
of a the worker during the stopping of the process. During the soft
stop, we could mark the CLI listener as an unstoppable job and still
handle new connections till every other jobs are stopped.
This patch implements http_apply_early_hint_rule() function is responsible of
building HTTP 103 Early Hint responses each time a "early-hint" rule is matched.
This patch adds a "early_hint" struct to "arg" union of "act_rule" struct
and parse "early-hint" http-request keyword with it using the same
code as for "(add|set)-header" parser.
When namespaces are disabled, support is still reported because the file
is built with almost nothing in it but built anyway. Instead of extending
the scope of the numerous ifdefs in this file, better avoid building it
when namespaces are diabled. In this case we define my_socketat() as an
inline function mapping directly to socket(). The struct netns_entry
still needs to be defined because it's used by various other functions
in the code.
This format is pretty similar to the previous "short" format except
that it also removes the severity level. Thus only the raw message is
sent. This is suitable for use in containers, where only the raw
information is expected and where the severity is supposed to come
from the file descriptor used.
This format is meant to be used with local file descriptors. It emits
messages only prefixed with a level, removing all the process name,
system name, date and so on. It is similar to the printk() format used
on Linux. It's suitable to be sent to a local logger compatible with
systemd's output format.
Note that the facility is still required but not used, hence it is
suggested to use "daemon" to remind that it's a local logger.
Example :
log stdout format short daemon # send everything to stdout
log stderr format short daemon notice # send important events to stderr
It's easy to detect when logs on some paths are lost as sendmsg() will
return EAGAIN. This is particularly true when sending to /dev/log, which
often doesn't support a big logging capacity. Let's keep track of these
and report the total number of dropped messages in "show info".
We exclusively use stream_int_update() now, the lower layers are not
called anymore so let's remove them, as well as si_update() which used
to be their wrapper.
The function used to be called in turn for each side of the stream, but
since it's called exclusively from process_stream(), it prevents us from
making use of the knowledge we have of the operations in progress for
each side, resulting in having to go all the way through functions like
stream_int_notify() which are not appropriate there.
That patch creates a new function, si_update_both() which takes two
stream interfaces expected to belong to the same stream, and processes
their flags in a more suitable order, but for now doesn't change the
logic at all.
The next step will consist in trying to reinsert the rest of the socket
layer-specific update code to ultimately update the flags correctly at
the end of the operation.
After careful inspection, it now seems OK to call si_chk_rcv() only when
SI_FL_WAIT_ROOM is cleared and SI_FL_WANT_PUT is set, since all identified
call places have already taken care of this.
Instead of clearing the SI_FL_WAIT_ROOM flag and losing the information
about the need from the producer to be woken up, we now call si_chk_rcv()
immediately. This is cheap to do and it could possibly be further improved
by only doing it when SI_FL_WAIT_ROOM was still set, though this will
require some extra auditing of the code paths.
The only remaining place where the flag was cleared without a call to
si_chk_rcv() is si_alloc_ibuf(), but since this one is called from a
receive path woken up from si_chk_rcv() or not having failed, the
clearing was not necessary anymore either.
And there was one place in stream_int_notify() where si_chk_rcv() was
called with SI_FL_WAIT_ROOM still explicitly set so this place was
adjusted in order to clear the flag prior to calling si_chk_rcv().
Now we don't have any situation where we randomly clear SI_FL_WAIT_ROOM
without trying to wake the other side up, nor where we call si_chk_rcv()
with the flag set, so this flag should accurately represent a failed
attempt at putting data into the buffer.
When CF_DONT_READ is set, till now we used to set SI_FL_WAIT_ROOM, which
is not appropriate since it would lose the subscribe status. Instead let's
clear SI_FL_WANT_PUT (just like applets do), and set the flag only when
CF_DONT_READ is cleared.
We have to do this in stream_int_update(), and in si_cs_io_cb() after
returning from si_cs_recv() since it would be a bit invasive to hack
this one for now. It must not be done in stream_int_notify() otherwise
it would re-enable blocked applets.
Last, when si_chk_rcv() is called, it immediately clears the flag before
calling ->chk_rcv() so that we are not tempted to uselessly loop on the
same call until the receive function is called. This is the same principle
as what is done with the applet scheduler.
This flag should already be cleared before calling the *chk_rcv() functions.
Before adapting all call places, let's first make sure si_chk_rcv() clears
it before calling them so that these functions do not have to check it again
and so that they do not adjust it. This function will only call the lower
layers if the SI_FL_WANT_PUT flag is present so that the endpoint can decide
not to be called (as done with applets).
There was an ambiguity in which functions of the si_ops struct could be
null or not. only ->update doesn't exist in one of the si_ops (the
embedded one), all others are always defined. ->shutr and ->shutw were
never tested. However ->chk_rcv() and ->chk_snd() were tested, causing
confusion about the proper way to wake the other side up if undefined
(which never happens).
Let's update the comments to state these functions are mandatory and
remove the offending checks.
We now do this on the si_cs_recv() path so that we always have
SI_FL_WANT_PUT properly set when there's a need to receive and
SI_FL_WAIT_ROOM upon failure.
It doesn't make sense to limit this code to applets, as any stream
interface can use it. Let's rename it by simply dropping the "applet_"
part of the name. No other change was made except updating the comments.
The buffer allocation callback appctx_res_wakeup() used to rely on old
tricks to detect if a buffer was already granted to an appctx, namely
by checking the task's state. Not only this test is not valid anymore,
but it's inaccurate.
Let's solely on SI_FL_WAIT_ROOM that is now set on allocation failure by
the functions trying to allocate a buffer. The buffer is now allocated on
the fly and the flag removed so that the consistency between the two
remains granted. The patch also fixes minor issues such as the function
being improperly declared inline(!) and the fact that using appctx_wakeup()
sets the wakeup reason to TASK_WOKEN_OTHER while we try to use TASK_WOKEN_RES
when waking up consecutive to a ressource allocation such as a buffer.
This function replaces stream_res_available(), which is used as a callback
for the buffer allocator. It now carefully checks which stream interface
was blocked on a buffer allocation, tries to allocate the input buffer to
this stream interface, and wakes the task up once such a buffer was found.
It will automatically remove the SI_FL_WAIT_ROOM flag upon success since
the info this flag indicates becomes wrong as soon as the buffer is
allocated.
The code is still far from being perfect because if a call to si_cs_recv()
fails to allocate a buffer, we'll still end up passing via process_stream()
again, but this could be improved in the future by using finer-grained
wake-up notifications.
The active peers output indicates both the number of established peers
connections and the number of peers connection attempts. The new counter
"ConnectedPeers" also indicates the number of currently connected peers.
This helps detect that some peers cannot be reached for example. It's
worth mentioning that this value changes over time because unused peers
are often disconnected and reconnected. Most of the time it should be
equal to ActivePeers.
Peers are the last type of activity which can maintain a job present, so
it's important to report that such an entity is still active to explain
why the job count may be higher than zero. Here by "ActivePeers" we report
peers sessions, which include both established connections and outgoing
connection attempts.
When an haproxy process doesn't stop after a reload, it's because it
still has some active "jobs", which mainly are active sessions, listeners,
peers or other specific activities. Sometimes it's difficult to troubleshoot
the cause of these issues (which generally are the result of a bug) only
because some indicators are missing.
This patch add the number of listeners, the number of jobs, and the stopping
status to the output of "show info". This way it becomes a bit easier to try
to narrow down the cause of such an issue should it happen. A typical use
case is to connect to the CLI before reloading, then issuing the "show info"
command to see what happens. In the normal situation, stopping should equal
1, jobs should equal 1 (meaning only the CLI is still active) and listeners
should equal zero.
The patch is so trivial that it could make sense to backport it to 1.8 in
order to help with troubleshooting.
It was reported here that authentication may fail when threads are
enabled :
https://bugzilla.redhat.com/show_bug.cgi?id=1643941
While I couldn't reproduce the issue, it's obvious that there is a
problem with the use of the non-reentrant crypt() function there.
On Linux systems there's crypt_r() but not on the vast majority of
other ones. Thus a first approach consists in placing a lock around
this crypt() call. Another patch may relax it when crypt_r() is
available.
This fix must be backported to 1.8. Thanks to Ryan O'Hara for the
quick notification.
Commit 27346b01a ("OPTIM: tools: optimize my_ffsl() for x86_64") optimized
my_ffsl() for intensive use cases in the scheduler, but as half of the times
I got it wrong so it counted bits the reverse way. It doesn't matter for the
scheduler nor fd cache but it broke cpu-map with threads which heavily relies
on proper ordering.
We should probably consider dropping support for gcc < 3.4 and switching
to builtins for these ones, though often they are as ambiguous.
No backport is needed.
When building with DEBUG_MEMORY_POOLS, an element returned from the
cache would not have its pool link initialized unless it's allocated
using pool_alloc(). This is problematic for buffer allocators which
use pool_alloc_dirty(), as freeing this object will make the code
think it was allocated from another pool. This patch does two things :
- make __pool_get_from_cache() set the link
- remove the extra initialization from pool_alloc() since it's always
done in either __pool_get_first() or __pool_refill_alloc()
This patch is marked MINOR since it only affects code explicitly built
for debugging. No backport is needed.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
Add a struct server pointer in the mworker_proc struct so we can easily
use it as a target for the mworker proxy.
pcli_prefix_to_pid() is used to find the right PID of the worker
when using a prefix in the CLI. (@master, @#<relative pid> , @<pid>)
pcli_pid_to_server() is used to find the right target server for the
CLI proxy.
The master process does not need all the keywords of the cli, add 2
flags to chose which keyword to use.
It might be useful to activate some of them in a debug mode later...
This patch introduces mworker_cli_proxy_new_listener() which allows the
creation of new listeners for the CLI proxy.
Using this function it is possible to create new listeners from the
program arguments with -Sa <unix_socket>. It is allowed to create
multiple listeners with several -Sa.
This patch implements a listen proxy within the master. It uses the
sockpair of all the workers as servers.
In the current state of the code, the proxy is only doing round robin on
the CLI of the workers. A CLI mode will be needed to know to which CLI
send the requests.
The init code of the mworker_proc structs has been moved before the
init of the listeners.
Each socketpair is now connected to a CLI within the workers, which
allows the master to access their CLI.
The inherited flag of the worker side socketpair is removed so the
socket can be closed in the master.
With the new synchronous si_cs_send() at the end of process_stream(),
we're seeing re-appear the I/O layer specific part of the stream interface
which is supposed to deal with I/O event subscription. The only difference
is that now we subscribe to I/Os only after having attempted (and failed)
them.
This patch brings a cleanup in this by reintroducing stream_int_update_conn()
with the send code from process_stream(). However this alone would not be
enough because the flags which are cleared afterwards would result in the
loss of the possible events (write events only at the moment). So the flags
clearing and stream-int state updates are also performed inside si_update()
between the generic code and the I/O specific code. This definitely makes
sense as after this call we can simply check again for channel and SI flag
changes and decide to loop once again or not.
This will supersed channel_alloc_buffer() while relying on it. It will
automatically adjust SI_FL_WAIT_ROOM on the stream-int depending on
success or failure to allocate this buffer.
It's worth noting that it could make sense to also set SI_FL_WANT_PUT
each time we do this to further simplify the code at user places such
as applets, but it would possibly not be easy to clean this flag
everywhere an rx operation stops.
The behaviour of the flag CF_WRITE_PARTIAL was modified by commit
95fad5ba4 ("BUG/MAJOR: stream-int: don't re-arm recv if send fails") due
to a situation where it could trigger an immediate wake up of the other
side, both acting in loops via the FD cache. This loss has caused the
need to introduce CF_WRITE_EVENT as commit c5a9d5bf, to replace it, but
both flags express more or less the same thing and this distinction
creates a lot of confusion and complexity in the code.
Since the FD cache now acts via tasklets, the issue worked around in the
first patch no longer exists, so it's more than time to kill this hack
and to restore CF_WRITE_PARTIAL's semantics (i.e.: there has been some
write activity since we last left process_stream).
This patch mostly reverts the two commits above. Only the part making
use of CF_WROTE_DATA instead of CF_WRITE_PARTIAL to detect the loss of
data upon connection setup was kept because it's more accurate and
better suited.
This patch makes the capable of storing HTTP objects larger than a buffer.
It makes usage of the "block by block shared object allocation" new shctx API.
A new pointer to struct shared_block has been added to the cache applet
context to memorize the next block to be used by the HTTP cache I/O handler
http_cache_io_handler() to emit the data. Another member, named "sent" memorize
the number of bytes already sent by this handler. So, to send an object from cache,
http_cache_io_handler() must be called until "sent" counter reaches the size
of this object.
This patch makes shctx capable of storing objects in several parts,
each parts being made of several blocks. There is no more need to
walk through until reaching the end of a row to append new blocks.
A new pointer to a struct shared_block member, named last_reserved,
has been added to struct shared_block so that to memorize the last block which was
reserved by shctx_row_reserve_hot(). Same thing about "last_append" pointer which
is used to memorize the last block used by shctx_row_data_append() to store the data.
This option makes a proxy use only HTX-compatible muxes instead of the
HTTP-compatible ones for HTTP modes. It must be set on both ends, this
is checked at parsing time.
Some samples representing time will cover more than one sample at once
if they are units of time per time. For this we'd need to have the
ability to loop over swrate_add() multiple times but that would be
inefficient. By developing the function elevated to power N, it's
visible that some coefficients quickly disappear and that those which
remain at the first order more or less compensate each other.
Thus a simplified version of this function was added to provide a single
value for a given number of samples. Tests with multiple values, window
sizes and sample sizes have shown that it is possible to make it remain
surprisingly accurate (typical error < 0.2% over various large window
and sample sizes, even samples representing up to 1/4 of the window).
Avoid using conn_xprt_want_send/recv, and totally nuke cs_want_send/recv,
from the upper layers. The polling is now directly handled by the connection
layer, it is activated on subscribe(), and unactivated once we got the event
and we woke the related task.
Make sure we don't have any subscription when the connection is going in
idle mode, otherwise there's a race condition when the connection is
reused, if there are still old subscriptions, new ones won't be done.
No backport is needed.
When mapping memory with mmap(), we should use a fd of -1, not 0. 0 may
work on linux, but it doesn't work on FreeBSD, and probably other OSes.
It would be nice to backport this to 1.8 to help debugging there.
Commit ac6c880 ("BUILD: memory: fix pointer declaration for atomic CAS")
attemtped to fix a build warning affecting the lock-free version of the
pool allocator. But the fix tried to hide the cause instead of addressing
it, thus clang still complains about (void **) not matching (void ***).
The real solution is to declare free_list (void **) and not to use a cast.
Now this builds fine with gcc/clang with and without threads.
No backport is needed.
The purpose is to detect if threads or processes are competing for the
same CPU. This can happen when threads are incorrectly bound, or after a
reload if the previous process still has an important activity. With
threads this situation is problematic because a preempted thread holding
a lock will block other ones waiting for this lock to be released.
A first attempt consisted in measuring the cumulated lost time more
precisely but the system's scheduler is smart enough to try to limit the
thread preemption rate by mostly context switching during poll()'s blank
periods, so most of the time lost is not seen. In essence this is good
because it means a thread is not preempted with a lock held, and even
regarding the rendez-vous point it cannot prevent the other ones from
making progress. But still it happens tens to hundreds of times per
second that a thread might be preempted, so it's still possible to detect
that the situation is happening, thus it's interesting to measure and
report its frequency.
Each time we enter the poller, we check the CPU time spent working and
see if we've lost time doing something else. To limit false positives,
we're only interested in losses of 500 microseconds or more (i.e. half
a clock tick on a 1 kHz system). If so, it indicates that some time was
stolen by another thread or process. Note that we purposely store some
sub-millisecond counters so that under heavy traffic with a 1 kHz clock,
it's still possible to measure something without being subject to the
risk of rounding errors (i.e. if exactly 1 ms is stolen it's possible
that the time difference could often be slightly lower).
This counter of lost CPU time slots time is reported in "show activity"
in numbers of milliseconds of CPU lost per second, per 15s, and total
over the process' life. By definition, the per-second counter cannot
report values larger than 1000 per thread per second and the 15s one
will be limited to 15000/s in the worst case, but it's possible that
peak values exceed such thresholds after long pauses.
These two functions retrieve respectively the monotonic clock time and
the per-thread CPU time when available on the platform, or return zero.
These syscalls may require to link with -lrt on certain libc, which is
enabled in the Makefile with USE_RT=1 (default on Linux systems).
The calls to HA_ATOMIC_CAS() on the lockfree version of the pool allocator
were mistakenly done on (void*) for the old value instead of (void **).
While this has no impact on "recent" gcc, it does have one for gcc < 4.7
since the CAS was open coded and it's not possible to assign a temporary
variable of type "void".
No backport is needed, this only affects 1.9.
By placing this code into time.h (tv_entering_poll() and tv_leaving_poll())
we can remove the logic from the pollers and prepare for extending this to
offer more accurate time measurements.
The 4 pollers all contain the same code used to compute the poll timeout.
This is pointless, let's centralize this into fd.h. This also gets rid of
the useless SCHEDULER_RESOLUTION macro which used to work arond a very old
linux 2.2 bug causing select() to wake up slightly before the timeout.
Each thread now keeps the last ~512 kB of freed objects into a local
cache. There are some heuristics involved so that a specific pool cannot
use more than 1/8 of the total cache in number of objects. Tests have
shown that 512 kB is an optimal size on a 24-thread test running on a
dual-socket machine, resulting in an overall 7.5% performance increase
and a cache miss ratio reducing from 19.2 to 17.7%. Anyway it seems
pointless to keep more than an L2 cache, which probably explains why
sizes between 256 and 512 kB are optimal.
Cached objects appear in two lists, one per pool and one LRU to help
with fair eviction. Currently there is no way to check each thread's
cache state nor to flush it. This cache cannot be disabled and is
enabled as soon as the lockless pools are enabled (i.e.: threads are
enabled, no pool debugging is in use and the CPU supports a double word
CAS).
For caching it will be convenient to have indexes associated with pools,
without having to dereference the pool itself. One solution could consist
in replacing all pool pointers with integers but this would limit the
number of allocatable pools. Instead here we allocate the 32 first pools
from a pre-allocated array whose base address is known so that it's trivial
to convert a pool to an index in this array. Pools that cannot fit there
will be allocated normally.
Currently we have per-thread arrays of trees and counts, but these
ones unfortunately share cache lines and are accessed very often. This
patch moves the task-specific stuff into a structure taking a multiple
of a cache line, and has one such per thread. Just doing this has
reduced the cache miss ratio from 19.2% to 18.7% and increased the
12-thread test performance by 3%.
It starts to become visible that we really need a process-wide per-thread
storage area that would cover more than just these parts of the tasks.
The code was arranged so that it's easy to move the pieces elsewhere if
needed.
Now we still have a main contention point with the timers in the main
wait queue, but the vast majority of the tasks are pinned to a single
thread. This patch creates a per-thread wait queue and queues a task
to the local wait queue without any locking if the task is bound to a
single thread (the current one) otherwise to the shared queue using
locking. This significantly reduces contention on the wait queue. A
test with 12 threads showed 11 ms spent in the WQ lock compared to
4.7 seconds in the same test without this change. The cache miss ratio
decreased from 19.7% to 19.2% on the 12-thread test, and its performance
increased by 1.5%.
Another indirect benefit is that the average queue size is divided
by the number of threads, which roughly removes log(nbthreads) levels
in the tree and further speeds up lookups.
The vast majority of FDs are only seen by one thread. Currently the lock
on FDs costs a lot because it's touched often, though there should be very
little contention. This patch ensures that the lock is only grabbed if the
FD is shared by more than one thread, since otherwise the situation is safe.
Doing so resulted in a 15% performance boost on a 12-threads test.
peers_init_sync() doesn't check task_new()'s return value and doesn't
return any result to indicate success or failure. Let's make it return
an int and check it from the caller.
This can be backported as far as 1.6.
This statement is used as a hint for the compiler so that it knows that
the location where it's placed cannot be reached. It will mostly be used
after longjmp() or equivalent statements that deal with error processing
and that the compiler doesn't know will not return on certain conditions,
so that it doesn't complain about null dereferences on error paths.
Some pseudo-headers are added during the headers parsing, mainly for the mux
H2. With this flag, it is possible to not add them. This avoid some boring
filtering in the mux H1.
Instead of using offsets relating to the parsed buffer to store start line
infos, we now use indirect strings. So now, these infos remain valid only if the
origin buffer remains untouched. But it's not a real problem because this union
is used during the parsing and never stored to a later use.
This flags will be used by multiplexers to warn a conn-stream (and, by
transitivity, a stream) it is not the first one created by the mux. It will help
mux H1 to handle keep-alive connections.
Since keep-alive mode is the default mode, the passive close has disappeared,
and in the code, httpclose and forceclose options are handled the same way:
connections with the client and the server are closed as soon as the request and
the response are received and missing "Connection: close" header is added in
each direction.
So to make things clearer, forceclose is now an alias for httpclose. And
httpclose is explicitly an active close. So the old passive close does not exist
anymore. Internally, the flag PR_O_HTTP_PCL has been removed and PR_O_HTTP_FCL
has been replaced by PR_O_HTTP_CLO. In HTTP analyzers, the checks done to find
the right mode to use, depending on proxies options and "Connection: " header
value, have been simplified.
This should only be a cleanup and no changes are expected.
To ease the refactoring, the function "http_header_add_tail" have been
remove. Now, "http_header_add_tail2" is always used. And the function
"capture_headers" have been renamed into "http_capture_headers". Finally, some
functions have been exported.
HTTP_FLG_* and HTTP_IS_* were moved from "proto/proto_http.h" to "common/http.h"
but the associated comment was forgotten during the move.
This is 1.9-specific and should not be backported.
Make sure we unsubscribe from events before si_release_endpoint destroys
the conn_stream, or it will be never called. To do so, move the call to
unsubscribe to si_release_endpoint() directly.
This is 1.9-specific and shouldn't be backported.
When subscribing, we don't need to provide a list element, only the h2 mux
needs it. So instead, Add a list element to struct h2s, and use it when a
list is needed.
This forces us to use the unsubscribe method, since we can't just unsubscribe
by using LIST_DEL anymore.
This patch is larger than it should be because it includes some renaming.
As we don't know how subscriptions are handled, we can't just assume we can
use LIST_DEL() to unsubscribe, so introduce a new method to mux and connections
to do so.
