The rate-limit feature relied on a timer to define how long a frontend
must remain idle. It was not considering the pending connections, so it
was almost always ready to be used again and only the accept's limit was
preventing new connections from coming in. By accounting for the pending
connection, we can compute a correct delay and effectively make the
frontend go idle for that (short) time.
Latest BF_READ_ATTACHED fix has unveiled a nice issue with the way
HTTP requests and responses are forwarded. The case where the request
aborts after the response has responded (POST with early response)
forgot to re-enable auto-close on the response. In fact it still
worked thanks to a side effect as long as BF_READ_ATTACHED was there
to force the states to be resynced (and the flags). Since last fix,
the missing auto-close causes CLOSE_WAIT connections when the client
aborts too late during a data transfer.
The right fix consists in considering the situation where the client
experiences an error and to explicitly abort the transfer. There is
no need to wake the response analysers up for that since they'd have
no added value and the analysers flags are cleared. However for a
future usage, that might help (eg: stickiness, ...).
This fix should be backported to 1.4 if the previous one is backported
too. After all the non-reg tests, the risks to see a problem arise
without both patches seems low, and both patches touch sensible areas
of the code. So there's no hurry.
The BF_READ_ATTACHED flag was created to wake analysers once after
a connection was established. It turns out that this flag is never
cleared once set, so even if there is no event, some analysers are
still evaluated for no reason.
The bug was introduced with commit ea38854d34.
It may cause slightly increased CPU usages during data transfers, maybe
even quite noticeable once when transferring transfer-encoded data,
due to the fact that the request analysers are being checked for every
chunk.
This fix must be backported in 1.4 after all non-reg tests have been
completed.
The response analyser was not emptied upon creation of a new session. In
fact it was always zero just because last session leaved it in a zero state,
but in case of shared pools this cannot be guaranteed. The net effect is
that it was possible to have some HTTP (or any other) analysers on the
response path of a stats unix socket, which would reject the response.
This fix must be backported to 1.4.
Commit 4605e3b641cebbdbb2ee5726e5bbc3c03a2d7b5e was not enough, because
connections passing from a TCP frontend to an HTTP backend without any
ACL and via a "default_backend" statement were still working on non-initialized
data. An initialization was missing in the session_set_backend() function, next
to the initialization of hdr_idx.
It's sometimes very useful to be able to monitor a production status in real
time by comparing servers behaviours. Now halog is able to do this when called
with "-srv". It reports various fields for each server found in a log, including
statuses, total reqs, valid reqs, percent of valid reqs, average connection time,
average response time.
It was once reported at least by Dirk Taggesell that the consistent
hash had a very poor distribution, making use of only two servers.
Jeff Persch analysed the code and found the root cause. Consistent
hash makes use of the server IDs, which are completed after the chash
array initialization. This implies that each server which does not
have an explicit "id" parameter will be merged at the same place in
the chash tree and that in the end, only the first or last servers
may be used.
The now obvious fix (thanks to Jeff) is to assign the missing IDs
earlier. However, it should be clearly understood that changing a
hash algorithm on live systems will rebalance the whole system.
Anyway, the only affected users will be the ones for which the
system is quite unbalanced already. The ones who fix their IDs are
not affected at all.
Kudos to Jeff for spotting that bug which got merged 3 days after
the consistent hashing !
When running in pure TCP mode with a traffic inspection rule to detect
HTTP protocol, we have to initialize the HTTP transaction too. The
effect of not doing this was that some incoming connections could have
been matched as carrying HTTP protocol eventhough this was not the case.
Both dispatch and http_proxy modes were broken since 1.4-dev5 when
the adjustment of server health based on response codes was introduced.
In fact, in these modes, s->srv == NULL. The result is a plain segfault.
It should have been noted critical, but the fact that it remained 6
months without being noticed indicates that almost nobody uses these
modes anymore. Also, the crash is immediate upon first request.
Further versions should not be affected anymore since it's planned to
have a dummy server instead of these annoying NULL pointers.
Released version 1.4.6 with the following main changes :
- [BUILD] ebtree: update to v6.0.1 to remove references to dprintf()
- [CLEANUP] acl: make use of eb_is_empty() instead of open coding the tree's emptiness test
- [MINOR] acl: add srv_is_up() to check that a specific server is up or not
- [DOC] add a few precisions about the use of RDP cookies
RDP cookies are not necessarily easy to implement because they require
some configuration on the servers. Add a few hints so that people know
what to check on their servers.
This ACL was missing in complex setups where the status of a remote site
has to be considered in switching decisions. Until there, using a server's
status in an ACL required to have a dedicated backend, which is a bit heavy
when multiple servers have to be monitored.
Released version 1.4.5 with the following main changes :
- [DOC] report minimum kernel version for tproxy in the Makefile
- [MINOR] add the "ignore-persist" option to conditionally ignore persistence
- [DOC] add the "ignore-persist" option to conditionally ignore persistence
- [DOC] fix ignore-persist/force-persist documentation
- [BUG] cttproxy: socket fd leakage in check_cttproxy_version
- [DOC] doc/configuration.txt: fix typos
- [MINOR] option http-pretend-keepalive is both for FEs and BEs
- [MINOR] fix possible crash in debug mode with invalid responses
- [MINOR] halog: add support for statisticts on status codes
- [OPTIM] halog: use a faster zero test in fgets()
- [OPTIM] halog: minor speedup by using unlikely()
- [OPTIM] halog: speed up fgets2-64 by about 10%
- [DOC] refresh the README file and merge the CONTRIB file into it
- [MINOR] acl: support loading values from files
- [MEDIUM] ebtree: upgrade to version 6.0
- [MINOR] acl trees: add flags and union members to store values in trees
- [MEDIUM] acl: add ability to insert patterns in trees
- [MEDIUM] acl: add tree-based lookups of exact strings
- [MEDIUM] acl: add tree-based lookups of networks
- [MINOR] acl: ignore empty lines and comments in pattern files
- [MINOR] stick-tables: add support for "stick on hdr"
It is now possible to stick on an IP address found in a HTTP header. Right
now only the last occurrence of the header can be used, which is generally
enough for most uses. Also, the header extraction rule only knows how to
convert the header to IP. Later it will be usable as a plain string with
an implicit conversion, and the syntax will not change.
Most often, pattern files used by ACLs will be produced by tools
which emit some comments (eg: geolocation lists). It's very annoying
to have to clean the files before using them, and it does not make
much sense to be able to support patterns we already can't input in
the config file. So this patch makes the pattern file loader skip
lines beginning with a sharp and the empty ones, and strips leading
spaces and tabs.
Networks patterns loaded from files for longest match ACL testing
will now be arranged into a prefix tree. This is possible thanks to
the new prefix features in ebtree v6.0. Longest match testing is
slightly slower than exact data maching. However, the measured impact
of running at 42000 requests per second and testing whether the IP
address found in a header belongs to a list of 52000 networks or
not is 3% CPU (increase from 66% to 69%). This is low enough to
permit true geolocation based on huge tables.
Now if some ACL patterns are loaded from a file and the operation is
an exact string match, the data will be arranged in a tree, yielding
a significant performance boost on large data sets. Note that this
only works when case is sensitive.
A new dedicated function, acl_lookup_str(), has been created for this
matching. It is called for every possible input data to test and it
looks the tree up for the data. Since the keywords are loosely typed,
we would have had to add a new columns to all keywords to adjust the
function depending on the type. Instead, we just compare on the match
function. We call acl_lookup_str() when we could use acl_match_str().
The tree lookup is performed first, then the remaining patterns are
attempted if the tree returned nothing.
A quick test shows that when matching a header against a list of 52000
network names, haproxy uses 68% of one core on a core2-duo 3.2 GHz at
42000 requests per second, versus 66% without any rule, which means
only a 2% CPU increase for 52000 rules. Doing the same test without
the tree leads to 100% CPU at 6900 requests/s. Also it was possible
to run the same test at full speed with about 50 sets of 52000 rules
without any measurable performance drop.
The code is now ready to support loading pattern from filesinto trees. For
that, it will be required that the ACL keyword has a flag ACL_MAY_LOOKUP
and that the expr is case sensitive. When that is true, the pattern will
have a flag ACL_PAT_F_TREE_OK to indicate that it is possible to feed the
tree instead of a usual pattern if the parsing function is able to do this.
The tree's root is pre-initialized in the pattern's value so that the
function can easily find it. At that point, if the parsing function decides
to use the tree, it just sets ACL_PAT_F_TREE in the return flags so that
the caller knows the tree has been used and the pattern can be recycled.
That way it will be possible to load some patterns into the tree when it
is compatible, and other ones as linear linked lists. A good example of
this might be IPv4 network entries : right now we support holes in masks,
but this very rare feature is not compatible with binary lookup in trees.
So the parser will be able to decide itself whether the pattern can go to
the tree or not.
If we want to be able to match ACLs against a lot of possible values, we
need to put those values in trees. That will only work for exact matches,
which is normally just what is needed.
Right now, only IPv4 and string matching are planned, but others might come
later.
This version adds support for prefix-based matching of memory blocks,
as well as some code-size and performance improvements on the generic
code. It provides a prefix insertion and longest match which are
compatible with the rest of the common features (walk, duplicates,
delete, ...). This is typically used for network address matching. The
longest-match code is a bit slower than the original memory block
handling code, so they have not been merged together into generic
code. Still it's possible to perform about 10 million networks lookups
per second in a set of 50000, so this should be enough for most usages.
This version also fixes some bugs in parts that were not used, so there
is no need to backport them.
The "acl XXX -f <file>" syntax was supported but nothing was read from
the file. This is now possible. All lines are merged verbatim, even if
they contain spaces (useful for user-agents). There are shortcomings
though. The worst one is that error reporting is too approximative.
Patrick Mézard reported that it was a bit awkward to have the CONTRIB
and contrib entries in the source archive since those can conflict on
case-insensitive file systems. That made a good opportunity to refresh
the README file and to remove that old outdated file.
in cttproxy.c check_cttproxy_version socket is not closed before function
returned. Although it is called only once, I think it is better to close
the socket.
A new idea came up to detect the presence of a null byte in a word.
It saves several operations compared to the previous one, and eliminates
the jumps (about 6 instructions which can run 2-by-2 in parallel).
This sole optimisation improved the line count speed by about 30%.
When trying to display an invalid request or response we received,
we must at least check that we have identified something looking
like a start of message, otherwise we can dereference a NULL pointer.
Shame on me, I didn't correctly document the "ignore-persist" statement
(convinced I used it like this in my tests, which is not the case at all...)
This fixes the doc and updates the proxy keyword matrix to add "force-persist".
This is used to disable persistence depending on some conditions (for
example using an ACL matching static files or a specific User-Agent).
You can see it as a complement to "force-persist".
In the configuration file, the force-persist/ignore-persist declaration
order define the rules priority.
Used with the "appsesion" keyword, it can also help reducing memory usage,
as the session won't be hashed the persistence is ignored.
Released version 1.4.4 with the following main changes :
- [BUG] appsession should match the whole cookie name
- [CLEANUP] proxy: move PR_O_SSL3_CHK to options2 to release one flag
- [MEDIUM] backend: move the transparent proxy address selection to backend
- [MINOR] add very fast IP parsing functions
- [MINOR] add new tproxy flags for dynamic source address binding
- [MEDIUM] add ability to connect to a server from an IP found in a header
- [BUILD] config: last patch breaks build without CONFIG_HAP_LINUX_TPROXY
- [MINOR] http: make it possible to pretend keep-alive when doing close
- [MINOR] config: report "default-server" instead of "(null)" in error messages
I met a strange behaviour with appsession.
I firstly thought this was a regression due to one of my previous patch
but after testing with a 1.3.15.12 version, I also could reproduce it.
To illustrate, the configuration contains :
appsession PHPSESSID len 32 timeout 1h
Then I call a short PHP script containing :
setcookie("P", "should not match")
When calling this script thru haproxy, the cookie "P" matches the appsession rule :
Dumping hashtable 0x11f05c8
table[1572]: should+not+match
Shouldn't it be ignored ?
If you confirm, I'll send a patch for 1.3 and 1.4 branches to check that the
cookie length is equal to the appsession name length.
This is due to the comparison length, where the cookie length is took into
account instead of the appsession name length. Using the appsession name
length would allow ASPSESSIONIDXXX (+ check that memcmp won't go after the
buffer size).
Also, while testing, I noticed that HEAD requests where not available for
URIs containing the appsession parameter. 1.4.3 patch fixes an horrible
segfault I missed in a previous patch when appsession is not in the
configuration and HAProxy is compiled with DEBUG_HASH.
Some servers do not completely conform with RFC2616 requirements for
keep-alive when they receive a request with "Connection: close". More
specifically, they don't bother using chunked encoding, so the client
never knows whether the response is complete or not. One immediately
visible effect is that haproxy cannot maintain client connections alive.
The second issue is that truncated responses may be cached on clients
in case of network error or timeout.
Óscar Frías Barranco reported this issue on Tomcat 6.0.20, and
Patrik Nilsson with Jetty 6.1.21.
Cyril Bonté proposed this smart idea of pretending we run keep-alive
with the server and closing it at the last moment as is already done
with option forceclose. The advantage is that we only change one
emitted header but not the overall behaviour.
Since some servers such as nginx are able to close the connection
very quickly and save network packets when they're aware of the
close negociation in advance, we don't enable this behaviour by
default.
"option http-pretend-keepalive" will have to be used for that, in
conjunction with "option http-server-close".
Using get_ip_from_hdr2() we can look for occurrence #X or #-X and
extract the IP it contains. This is typically designed for use with
the X-Forwarded-For header.
Using "usesrc hdr_ip(name,occ)", it becomes possible to use the IP address
found in <name>, and possibly specify occurrence number <occ>, as the
source to connect to a server. This is possible both in a server and in
a backend's source statement. This is typically used to use the source
IP previously set by a upstream proxy.
The transparent proxy address selection was set in the TCP connect function
which is not the most appropriate place since this function has limited
access to the amount of parameters which could produce a source address.
Instead, now we determine the source address in backend.c:connect_server(),
right after calling assign_server_address() and we assign this address in
the session and pass it to the TCP connect function. This cannot be performed
in assign_server_address() itself because in some cases (transparent mode,
dispatch mode or http_proxy mode), we assign the address somewhere else.
This change will open the ability to bind to addresses extracted from many
other criteria (eg: from a header).
We'll need another flag in the 'options' member close to PR_O_TPXY_*,
and all are used, so let's move this easy one to options2 (which are
already used for SQL checks).
