This reverts commit c618ed5ff4.
The list iterator is broken. As found by Fred, running QUIC single-
threaded shows that only the first connection is accepted because the
accepter relies on the element being initialized once detached (which
is expected and matches what MT_LIST_DELETE_SAFE() used to do before).
However while doing this in the quic_sock code seems to work, doing it
inside the macro show total breakage and the unit test doesn't work
anymore (random crashes). Thus it looks like the fix is not trivial,
let's roll this back for the time it will take to fix the loop.
The new mt_list code supports exponential back-off on conflict, which
is important for use cases where there is contention on a large number
of threads. The API evolved a little bit and required some updates:
- mt_list_for_each_entry_safe() is now in upper case to explicitly
show that it is a macro, and only uses the back element, doesn't
require a secondary pointer for deletes anymore.
- MT_LIST_DELETE_SAFE() doesn't exist anymore, instead one just has
to set the list iterator to NULL so that it is not re-inserted
into the list and the list is spliced there. One must be careful
because it was usually performed before freeing the element. Now
instead the element must be nulled before the continue/break.
- MT_LIST_LOCK_ELT() and MT_LIST_UNLOCK_ELT() have always been
unclear. They were replaced by mt_list_cut_around() and
mt_list_connect_elem() which more explicitly detach the element
and reconnect it into the list.
- MT_LIST_APPEND_LOCKED() was only in haproxy so it was left as-is
in list.h. It may however possibly benefit from being upstreamed.
This required tiny adaptations to event_hdl.c and quic_sock.c. The
test case was updated and the API doc added. Note that in order to
keep include files small, the struct mt_list definition remains in
list-t.h (par of the internal API) and was ifdef'd out in mt_list.h.
A test on QUIC with both quictls 1.1.1 and wolfssl 5.6.3 on ARM64 with
80 threads shows a drastic reduction of CPU usage thanks to this and
the refined memory barriers. Please note that the CPU usage on OpenSSL
3.0.9 is significantly higher due to the excessive use of atomic ops
by openssl, but 3.1 is only slightly above 1.1.1 though:
- before: 35 Gbps, 3.5 Mpps, 7800% CPU
- after: 41 Gbps, 4.2 Mpps, 2900% CPU
It's been warning as being deprecated since 2.0-dev4, it's about time
to drop it now. The error message recommends to either remove it or
use "option httpclose" instead. It's still referred to in the old
internal doc about the connection header, which itself seems highly
inaccurate by now.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
These are a collection of test files for a variety of features (old or
more recent). 2 or 3 files were found lying there non-committed and
were moved at the same time. A few deprecated or obsolete keywords were
updated to their recent equivalent. Many of these configurations are
made to trigger different parsing errors so it is normal that plenty
of them fail.
Now the tests directory is cleaner and easier to navigate through.
The code that is there to run some unit tests on some internal features
was moved to tests/unit. Ideally it should be buildable from the main
makefile though this is not yet the case.
The code that is kept for experimentation purposes (hashes, syscall
optimization etc) as well as some captures of the results was moved
to tests/exp.
A few totally obsolete files which couldn't build anymore and were
not relevant to current versions were removed.
This one was scheduled for removal in 2.3 since 2.2-dev3 by commit
1b85785bc ("MINOR: config: mark global.debug as deprecated"). Let's
remove it now. It remains totally possible to use -d on the command
line though.
str2listener() was temporarily hacked to support datagram sockets for
the log-forward listeners. This has has an undesirable side effect that
"bind udp@1.2.3.4:5555" was silently accepted as TCP for a bind line.
We don't need this hack anymore since the only user (log-forward) now
relies on str2receiver(). Now such an address will properly be rejected.
Now str2sa_range() will enforce the caller's port specification passed
using the PA_O_PORT_* flags, and will return an error on failure. For
optional ports, values 0-65535 will be enforced. For mandatory ports,
values 1-65535 are enforced. In case of ranges, it is also verified that
the upper bound is not lower than the lower bound, as this used to result
in empty listeners.
I couldn't find an easy way to test this using VTC since the purpose is
to trigger parse errors, so instead a test file is provided as
tests/ports.cfg with comments about what errors are expected for each
line.
Initially when mt_lists were added, their purpose was to be used with
the scheduler, where anyone may concurrently add the same tasklet, so
it sounded natural to implement a check in MT_LIST_ADD{,Q}. Later their
usage was extended and MT_LIST_ADD{,Q} started to be used on situations
where the element to be added was exclusively owned by the one performing
the operation so a conflict was impossible. This became more obvious with
the idle connections and the new macro was called MT_LIST_ADDQ_NOCHECK.
But this remains confusing and at many places it's not expected that
an MT_LIST_ADD could possibly fail, and worse, at some places we start
by initializing it before adding (and the test is superflous) so let's
rename them to something more conventional to denote the presence of the
check or not:
MT_LIST_ADD{,Q} : inconditional operation, the caller owns the
element, and doesn't care about the element's
current state (exactly like LIST_ADD)
MT_LIST_TRY_ADD{,Q}: only perform the operation if the element is not
already added or in the process of being added.
This means that the previously "safe" MT_LIST_ADD{,Q} are not "safe"
anymore. This also means that in case of backport mistakes in the
future causing this to be overlooked, the slower and safer functions
will still be used by default.
Note that the missing unchecked MT_LIST_ADD macro was added.
The rest of the code will have to be reviewed so that a number of
callers of MT_LIST_TRY_ADDQ are changed to MT_LIST_ADDQ to remove
the unneeded test.
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
This is where other imported components are located. All files which
used to directly include ebtree were touched to update their include
path so that "import/" is now prefixed before the ebtree-related files.
The ebtree.h file was slightly adjusted to read compiler.h from the
common/ subdirectory (this is the only change).
A build issue was encountered when eb32sctree.h is loaded before
eb32tree.h because only the former checks for the latter before
defining type u32. This was addressed by adding the reverse ifdef
in eb32tree.h.
No further cleanup was done yet in order to keep changes minimal.
Add test-list.c, a stress-test for mt_list, to ensure there's no concurrency
issue.
The number of threads is provided on the command line, and it randomly
add, removes, or parses the list until it made MAX_ACTION actions (currently
5000000).
This is a python wrapper which creates a socketpair and passes it as two
environment variable to haproxy.
It's the easiest way to test the sockpair protocol in haproxy.
This test file covers the various functions provided by ist.h. It allows
both to test them for absence of regression, and to observe the code
emitted at different optimization levels.
When support for passing SNI to the server was added in 1.6-dev3, there
was no way to validate that the certificate presented by the server would
really match the name requested in the SNI, which is quite a problem as
it allows other (valid) certificates to be presented instead (when hitting
the wrong server or due to a man in the middle).
This patch adds the missing check against the value passed in the SNI.
The "verifyhost" value keeps precedence if set. If no SNI is used and
no verifyhost directive is specified, then the certificate name is not
checked (this is unchanged).
In order to extract the SNI value, it was necessary to make use of
SSL_SESSION_get0_hostname(), which appeared in openssl 1.1.0. This is
a trivial function which returns the value of s->tlsext_hostname, so
it was provided in the compat layer for older versions. After some
refinements from Emmanuel, it now builds with openssl 1.0.2, openssl
1.1.0 and boringssl. A test file was provided to ease testing all cases.
After some careful observation period it may make sense to backport
this to 1.7 and 1.6 as some users rightfully consider this limitation
as a bug.
Cc: Emmanuel Hocdet <manu@gandi.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This config tries to involve the various possible combinations of connection
handshakes, on the accept side and on the connect side. It also produces logs
indicating the handshake time.
May be tested with tcploop as the server, both for TCP and HTTP mode :
- accept new connection
- pause 100ms
- send what looks like an HTTP response
- wait 500ms and close
Starting log server (mainly to check timers) :
$ socat udp-recvfrom:5514,fork -
Starting server :
$ tcploop 8000 L N A W P100 S:"HTTP/1.0 200 OK\r\nConnection: close\r\n\r\n" P500
Testing all combinations with server-speaks-first (tcp) :
$ nc 0 8007
Testing all combinations with client-speaks-first (tcp) :
$ (printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8007
Testing all combinations with client-speaks-first after pause (tcp) :
$ (usleep 0.05 ; printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8007
Testing all combinations with client-speaks-first (http) :
$ (printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8017
Testing all combinations with client-speaks-first after pause (http) :
$ (usleep 0.05 ; printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8017
Same tests must be redone after surrounding connect() in tcp_connect_server()
with fcntl(fd, F_SETFL, 0) and fcntl(fd, F_SETFL, O_NONBLOCK) for sycnhronous
connect().
A problem was reported recently by some users of programs compiled
with Go 1.5 which by default blocks all signals before executing
processes, resulting in haproxy not receiving SIGUSR1 or even SIGTERM.
This program mimmicks this behaviour to make it easier to run tests.
It also displays the current signal mask. A simple test consists in
running it through itself.
In C89, "void *" is automatically promoted to any pointer type. Casting
the result of malloc/calloc to the type of the LHS variable is therefore
unneeded.
Most of this patch was built using this Coccinelle patch:
@@
type T;
@@
- (T *)
(\(lua_touserdata\|malloc\|calloc\|SSL_get_app_data\|hlua_checkudata\|lua_newuserdata\)(...))
@@
type T;
T *x;
void *data;
@@
x =
- (T *)
data
@@
type T;
T *x;
T *data;
@@
x =
- (T *)
data
Unfortunately, either Coccinelle or I is too limited to detect situation
where a complex RHS expression is of type "void *" and therefore casting
is not needed. Those cases were manually examined and corrected.
A number of config files were present in the tests/ directory and which
would either test features that are easier to test using more recent files
or test obsolete features. All of them emit tons of useless warnings, and
instead of fixing them, better remove them since they have never been used
in the last 10 years or so.
The remaining files may still emit warnings and require some fixing but
they provide some value for some tests.
Summary:
Added a document for hashing under internal docs explaining
hashing in haproxy along with the results of tests under the test
folder.
These documents together explain the motivation for adding
options for hashing algorithms with the option of enabling or
disabling of avalanche.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
make_arg_list() builds an array of typed arguments with their values,
that the caller describes how to parse. This will be used to support
multiple arguments for ACLs and patterns, which is currently problematic
and prevents ACLs and patterns from being merged. Up to 7 arguments types
may be enumerated in a single 32-bit word, including their number of
mandatory parts.
At the moment, these files are not used yet, they're only built. Note that
the 4-bit encoding for the type has left only one unused type!
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
The MySQL check has been revamped to be able to send real MySQL data,
and to avoid Aborted connects on MySQL side.
It is however backward compatible with older version, but it is highly
recommended to use the new mode, by adding "user <username>" on the
"mysql-check" line.
The new check consists in sending two MySQL packet, one Client
Authentication packet, with "haproxy" username (by default), and one
QUIT packet, to correctly close MySQL session. We then parse the Mysql
Handshake Initialisation packet and/or Error packet. It is a basic but
useful test which does not produce error nor aborted connect on the
server.
(cherry picked from commit a1e4dcfe5718311b7653d7dabfad65c005d0439b)
The request cookie parser did not allow spaces to appear in cookie
values nor around the equal sign. The various RFCs on the subject
say different things, some suggesting that a space is allowed after
the equal sign and being worded in a way that lets one believe it
is allowed before too. Some spaces may appear inside values and be
part of the values. The quotes allow delimiters to be embedded in
values. The spaces before and after attributes should be trimmed.
The new parser addresses all those points and has been carefully tested.
It fixes misplaced spaces around equal signs before processing the cookies
or forwarding them. It also tries its best to perform clean removals by
always keeping the delimiter after the value being removed and leaving one
space after it.
The variable inside the parser have been renamed to make the code a lot
more understandable, and one multi-function pointer has been eliminated.
Since this patch fixes real possible issues, it should be backported to 1.4
and possibly 1.3, since one (single) case of wrong spaces has been reported
in 1.3.
The code handling the Set-Cookie has not been touched yet.
If the prefix is set to "/", it means the user does not want to alter
the original URI, so we don't want to insert a new slash before the
original URI.
(cherry-picked from commit 02a35c74942c1bce762e996698add1270e6a5030)
It is now possible to set or clear a cookie during a redirection. This
is useful for logout pages, or for protecting against some DoSes. Check
the documentation for the options supported by the "redirect" keyword.
(cherry-picked from commit 4af993822e880d8c932f4ad6920db4c9242b0981)
If "drop-query" is present on a "redirect" line using the "prefix" mode,
then the returned Location header will be the request URI without the
query-string. This may be used on some login/logout pages, or when it
must be decided to redirect the user to a non-secure server.
(cherry-picked from commit f2d361ccd73aa16538ce767c766362dd8f0a88fd)
22 regression tests for state machines are managed by the new
file tests/test-fsm.cfg. Check it, they are all documented
inside. Most of the bugs introduced during the FSM extraction
have been found with these tests.
