sink_find_early() is a convenient function that can be used instead of
sink_find() during parsing time in order to try to find a matching
sink even if the sink is not defined yet.
Indeed, if the sink is not defined, sink_find_early() will try to create
it and mark it as forward-declared. It will also save informations from
the caller to better identify it in case of errors.
If the sink happens to be found in the config, it will transition from
forward-declared type to its final type. Else, it means that the sink
was not found in the config, in this case, during postresolve, we raise
an error to indicate that the sink was not found in the configuration.
It should help solve postresolving issue with rings, because for now only
log targets implement proper ring postresolving.. but rings may be used
at different places in the code, such as debug() converter or in "traces"
section.
Function may be used from places where per-context actions are usually
registered (tcp_act.c, http_act.c, quic_rules.c.. to name a few) in
order to expose the do_log() action.
do_log() is quite similar to sess_log() or strm_log(), excepts that it
may be called at any time during session handling in an opportunistic
way as long as the session exists (the stream may or may not exist).
Also, it will try to emit the log as INFO by default, unless set-log-level
is used on the stream, or error origin flag is set.
This commit is the last one of a serie whose objective is to restore
QUIC transfer throughput performance to the state prior to the recent
QUIC MUX buffer allocator rework.
This gain is obtained by reporting received out-of-order ACK data range
to the QUIC MUX which can then decount room in its txbuf window. This is
implemented in QUIC streamdesc layer by adding a new invokation of
notify_room callback. This is done into qc_stream_buf_store_ack() which
handle out-of-order ACK data range.
Previous commit has introduced merging of overlapping ACK data range. As
such, it's easy to only report the newly acknowledged data range.
As with in-order ACKs, this new notification is only performed on
released streambuf. As such, when a streambuf instance is released,
notify_room notification now also reports the total length of
out-of-order ACK data range currently stored. This value is stored in a
new streambuf member <room> to avoid unnecessary tree lookup.
This <room> member also serves on in-order ACK notification to reduce
the notified room. This prevents to report invalid values when overlap
ranges are treated first out-of-order and then in-order, which would
cause an invalid QUIC MUX txbuf window value.
After this change has been implemented, performance has been
significantly improved, both with ngtcp2-client rate usage and on
interop goodput test. These values are now similar to the rate observed
on older haproxy version before QUIC MUX buffer allocator rework.
QUIC streamdesc layer is responsible to handle reception of ACK for
streams. It removes stream data from the underlying buffers on ACK
reception.
Streamdesc layer treats ACK in order at the stream level. Out of order
ACKs are buffered in a tree until they can be handled on older data
acknowledgement reception. Previously, qf_stream instance which comes
from the quic_tx_packet was used as tree node to buffer such ranges.
Introduce a new type dedicated to represent out of order stream ack data
range. This type is named qc_stream_ack. It contains minimal infos only
relative to the acknowledged stream data range.
This allows to reduce size of frequently used quic_frame with the
removal of tree node from qf_stream. Another side effect of this change
is that now quic_frame are always released immediately on ACK reception,
both in-order and out-of-order. This allows to also release the
quic_tx_packet instance which should reduce memory consumption.
The drawback of this change is that qc_stream_ack instance must be
allocated on out-of-order ACK reception. As such, qc_stream_desc_ack()
may fail if an error happens on allocation. For the moment, such error
is silenly recovered up to qc_treat_rx_pkts() with the dropping of the
received packet containing the ACK frame. In the future, it may be
useful to close the connection as this error may only happens on low
memory usage.
It is no longer supported to declare debug traces, via 'trace' directive, in
a global section. A 'traces' directive must be used instead. The syntax of
the 'trace' directive in these sections remains the same. But it is no
longer experimental.
The main reason for this change is to avoid to have a ring section defined
before a global one. Indeed, for now, forward declarations of ring sections
are not supported. So to configure traces, you had to add a ring section
before the global one defining the traces. Most of time, that meant to have
two global sections :
global
[...] # global settings
ring <name>
[...]
global
[...] # trace config
In addition, it will be possible to easily extend the traces section by
adding some new directives.
qc_stream_desc_ack() is the entrypoint for streamdesc layer to handle a
new acknowledgement of previously emitted STREAM data.
Previously, it was only able to deal with in-order ACK offset. The
caller was responsible to buffer out-of-order ACKs. Change this by
dealing with the latter case directly in qc_stream_desc_ack(). This
notably simplify ACK handling in quic_rx module.
QUIC streamdesc layer is used to manage QUIC MUX stream txbuf data
storage until acknowledgment. Currently, it only supports in-order
acknowledgment at the stream level. This requires to be able to buffer
out-of-order ACKs until they can be handled.
Previously, these ACKs were stored in a tree to the streamdesc instance.
Move this indexed storage at the streambuf instance.
This commit is purely an architecture change. However, it will allow to
extend ACK management in future patches, such as the ability to merge
overlapping out-of-order ACKs.
qc_stream_desc layer is used by QUIC MUX to store emitted STREAM data
until their acknowledgement. Each stream with Tx capability can allocate
its own qc_stream_desc. In turn, each stream desc can have one or
multiple data buffers. This is useful when a MUX stream releases a
buffer and allocate a new one, to preserve bandwith without waiting to
receive all acknowledgement of the previous buffer.
Each buffer is encapsulated in a qc_stream_buf structure. Previously, it
was stored as a list into qc_stream_desc. Change this storage to use a
tree instead. Each buffer is indexed by their offset.
This commit does not introduce functional changes. However, this
rearchitecture will be necessary for future commit to extend ACK
management which require fetching individual buffer instance, not just
the first or last element of a streamdesc, by their offset.
qc_stream_desc_ack() is used to handle ACK received for STREAM frame. It
removes acknowledged data from their underlying buffer.
If all data were removed after ACK handling, qc_stream_desc instance
would automatically be freed at the end of qc_stream_desc_ack().
However, this renders the function complicated to use. Simplify this by
removing this automatic removal. Now, caller is responsible to check
after ACK handling if qc_stream_desc instance can be removed. This is
easily done using qc_stream_desc_done() helper.
qc_stream_desc is an intermediary layer between QUIC MUX and quic_conn.
It is a facility which permits to store data to emit and keep them for
retransmission until acknowledgment. This layer is responsible to notify
QUIC MUX each time a buffer is freed. This is necessary as MUX buffer
allocation is limited by the underlying congestion window size.
Refactor this to use a mechanism similar to send notification. A new
callback notify_room can now be registered to qc_stream_desc instance.
This is set by QUIC MUX to qmux_ctrl_room(). On MUX QUIC free, special
care is now taken to reset notify_room callback to NULL.
Thanks to this refactoring, further adjustment have been made to refine
the architecture. One of them is the removal of qc_stream_desc
QC_SD_FL_OOB_BUF, which is now converted to a MUX layer flag
QC_SF_TXBUF_OOB.
Previous commit implement a refactor of MUX send notification from
quic_conn layer. With this new architecture, a proper callback is
defined for each qc_stream_desc instance.
This architecture change allows to simplify notification from quic_conn
layer. First, ensure the MUX callback to properly ignore retransmission
of an already emitted frame. Luckily, this can be handled easily by
comparing offsets and FIN status. Also, each QCS instance can now be
unregistered from send notification just prior qc_stream_desc releasing.
This ensures a QCS is never manipulated from quic_conn after its
emission ending. Both these changes render the send notification more
robust. As a nice effect, flag QUIC_FL_CONN_TX_MUX_CONTEXT can be
removed as it is now unneeded.
For STREAM emission, MUX QUIC generates one or several frames and emit
them via qc_send_mux(). Lower layer may use them as-is, or split them to
lower chunk to fit in a QUIC packet. It is then responsible to notify
the MUX to report the amount of data sent.
Previously, this was done via a direct call from quic_conn to MUX using
qcc_streams_sent_done(). Modify this to have a better isolation accross
layers. Define a send callback handled by the qc_stream_desc instance.
This allows the MUX to register each QCS instance individually to the
renamved qmux_ctrl_send() which replaces qcc_streams_sent_done().
At quic_conn layer, qc_stream_desc_send() can be used now. This is a
wrapper to qc_stream_desc layer to invoke the send callback if
registered.
This mechanism of qc_stream_desc callback should be extended later to
implement other notifications accross the QUIC stack.
A shared counter is added in the thread context to track the total number of
streams created on the thread. This number is then reported in stats. It
will be a useful information to diagnose some bugs.
A shared counter is added in the thread context to track the current number
of streams. This number is then reported in stats. It will be a useful
information to diagnose some bugs.
Thanks to the previous patch, it is now possible to add an action to
dynamically change the maxumum number of connection retires for a stream.
"set-retries" action may now be used to do so, from a "tcp-request content"
or a "http-request" rule. This action accepts an expression or an integer
between 0 and 100. The integer value is checked during the configuration
parsing and leads to an error if it is not in the expected range. However,
for the expression, the value is retrieve at runtime. So, invalid value are
just ignored.
Too high value is forbidden to avoid any trouble. 100 retries seems already
be an amazingly hight value. In addition, the option is only available on
backend or listen sections.
Because the max retries is limited to 100 at most, it can be stored as a
unsigned short. This save some space in the stream structure.
Instead of directly relying on the backend parameter to limit the number of
connection retries, we now use a per-stream value. This value is by default
inherited from the backend value when it is set. So for now, there is no
change except the stream value is used instead of the backend value. But
thanks to this change, it will be possible to dynamically change this value.
This function was only used by TCP actions and was private to tcp_act.c
file. However, it make sense to make it public to be used by any action
relying on an int-or-expression argument.
The function is provided by glibc. Nothing prevents us from using our
own outside of glibc there (tested on aarch64 with musl). We still do
not enable it by default as we don't yet know if all archs work well,
but it's sufficient to pass USE_BACKTRACE=1 when building with musl to
verify it's OK.
No need to include this possibly non-existing file when using our own
backtrace() implementation, it's only needed for the libc-provided one.
Because of this it's currently not possible to build musl with backtrace
enabled.
In 1.8 when adding "set server fqdn" with commit b418c1228c ("MINOR:
server: cli: Add server FQDNs to server-state file and stats socket."),
the HMAINT flag was not made part of the MAINT ones, so technically
speaking when changing the FQDN, the server is not completely considered
as in maintenance mode.
In its defense, the code location around that was completely messy, with
the aggregator flag being hidden between other values and purposely but
discretely ignoring one of the flags, so the comments were updated to
make the intent clearer (particularly regarding CMAINT which looked like
it was also forgotten while it was on purpose).
This can be backported anywhere.
The solution found in commit b500e84e24 ("BUG/MINOR: server: shut down
streams under thread isolation") to deal with inter-thread stream
shutdown doesn't work fine because there exists code paths involving
a server lock which can then deadlock on thread_isolate(). A better
solution then consists in deferring the shutdown to the stream itself
and just wake it up for that.
The only thing is that TASK_WOKEN_OTHER is a bit too generic and we
need to pass at least 2 types of events (SF_ERR_DOWN and SF_ERR_KILLED),
so we're now leveraging the new TASK_F_UEVT1 and _UEVT2 flags on the
task's state to convey these info. The caller only needs to wake the
task up with these flags set, and the stream handler will then finish
the job locally using stream_shutdown_self().
This needs to be carefully backported to all branches affected by the
dequeuing issue and containing any of the 5541d4995d ("BUG/MEDIUM:
queue: deal with a rare TOCTOU in assign_server_and_queue()"), and/or
b11495652e ("BUG/MEDIUM: queue: implement a flag to check for the
dequeuing").
TASK_WOKEN_MSG only says "someone sent you a message" but doesn't convey
any info about the message. TASK_WOKEN_OTHER says "you're woken for another
reason" but doesn't tell which one. Most often they're used as-is by the
task handlers to report very specific situations.
For some important control notifications, having the ability to modulate
the message a little bit is useful, so let's define two user event types
UEVT1 and UEVT2 to be used in conjunction with TASK_WOKEN_MSG or _OTHER
so that the application can know that a specific condition was explicitly
requested. It will be used this way:
task_wakeup(s->task, TASK_WOKEN_MSG | TASK_F_UEVT1);
or:
task_wakeup(s->task, TASK_WOKEN_OTHER | TASK_F_UEVT2);
Since events are cumulative, keep in mind not to consider a 3rd value
as the combination of EVT1+EVT2; these really mean that the two events
appeared (though in unspecified order).
For now it is only available for proxies with frontend capability because
log-steps are only evaluated under sess_log() or strm_log() which
essentially focus on the frontend side when it comes to log settings so
it's better to keep it this way for better consistency, at least for now.
For now the setting does nothing (it is not considered during runtime),
it will be implemented and documented in upcoming commits.
add proxy->conf.log_steps eb32 root tree which will be used to store the
log origin identifiers that should result in haproxy emitting a log as
configured by the user using upcoming "log-steps" proxy keyword.
It was chosen to use eb32 tree instead of simple bitfield because despite
the slight overhead it is more future-proof given that we already
implemented the prerequisites for seamless custom log origins registration
that will also be usable from "log-steps" proxy keyword.
Following previous commits, let's improve log_orig_to_str() so that
extra log origins (registered through log_orig_register()) can be
translated to string from origin ID.
For that, it is required to add eb_32 tree node to log_origin struct in
order to enable quick integer lookup during runtime. Slow name lookup
using the list is acceptable for config parsing, but it is not the case
during runtime when log_orig_to_str() is expected to be used. Also, to
prevent duplicated info, get rid of ->id field and use ->tree.key instead
Thanks to previous commit, we can know check for log_orig optional flags
in functions taking struct log_orig as parameter. Let's take this
opportunity to add the LOG_ORIG_FL_ERROR flag and check this flag at a
few places to handle the log message differently because if the flag is
set then the caller expects the log to be handled as an error explicitly.
e.g.: in _process_send_log_override(), if the flag is set, use the error
log format instead of the dedicated one.
Rename 'enum log_orig' to 'enum log_orig_id', since this enum specifically
contains the log origin ids.
Add 'struct log_orig' which wraps 'enum log_orig' with optional flags
(no flags defined for now).
Add log_orig() helper func that takes id and flags as parameter and
returns log_orig struct initialized with input arguments.
Update functions taking log origin as parameter so they explicitly take
log orig id or log orig wrapper as argument depending on the level of
context expected by the function.
add a way to register additional log origins using log_origin_register()
that may be used as log profile steps from log profile sections.
For now this does nothing as no extra origins are registered and extra log
origins are not yet considered for runtime logging paths.
When specifying an extra logging step for on <step> under log-profile
section, the logging step is stored within a binary tree for efficient
lookup during runtime. No performance impact should be expected if extra
log origins are not being used, and slight performance impact if extra
log origins are used.
Don't forget to update the documentation when new log origins are added
(both %OG log alias and on <step> log-profile keyword are concerned.
The proxy lock state isn't passed down to relax_listener
through dequeue_proxy_listeners, which causes a deadlock
in relax_listener when it tries to get that lock.
Backporting: Older versions didn't have relax_listener and directly called
resume_listener in dequeue_proxy_listeners. lpx should just be passed directly
to resume_listener then.
The bug was introduced in commit 001328873c
[cf: This patch should fix the issue #2726. It must be backported as far as
2.4]
It has never been permitted to explicitly reference named defaults
sections for which there are duplicate names. This means that when
a duplicate defaults section is found, there's no point in keeping
it since it will never be used for lookups, so it can be dropped.
However, some such defaults sections might have some rules in them
that are implicitly referenced by proxies placed after them. In this
case they cannot be removed.
What is done here is that upon each new named section creation, if
another one is found with the same name, its config location is stored
into the new proxy's {prev_file,prev_line} pair, and the old section is
either destroyed if its refcount is null, or just unindexed. The dup
check when creating a new proxy now consists in checking the prev_line
instead of performing a dup lookup on the defaults section.
This will guarantee that we can't find duplicate defaults sections in
their tree anymore, while still keeping track of what's allocated and
releasing everything upon exit.
Beyond the consistency gain, there are nice savings for large configs
involving many defaults sections: a test with 300k sections saved
about 1.9 GB of RAM, and started 25% faster likely thanks to spending
less time allocating memory.
We'll soon delete unreferenced and duplicated named defaults sections
from the list of proxies. The problem with this is that this list (in
fact a name-based tree) is used to release all of them at the end. Let's
add a list of orphaned defaults sections, typically those containing
"http-check send" statements or various other rules, and that are
implicitly inherited by a proxy hence have a non-zero refcount while
also having a name. These now makes it possible to remove them from
the name index while still keeping their memory around for the lifetime
of the process, and cleaning it at the end.
Proxy file names are assigned a bit everywhere (resolvers, peers,
cli, logs, proxy). All these elements were enumerated and now use
copy_file_name(). The only ha_free() call was turned to drop_file_name().
As a bonus side effect, a 300k backend config saved 14 MB of RAM.
The file name used to point to the calling function's stack for stick
tables, which was OK during parsing but remained dangling afterwards.
At least it was already marked const so as not to accidentally free it.
Let's make it point to a file_name_node now.
In proxies, stick-tables, servers, etc... at plenty of places we store
a file name and a line number. Some file names are the result of strdup()
(e.g. in proxies), others not (e.g. stick-tables) and leave dangling
pointers at the end of parsing. The risk of double-free is not null
either.
In order to stop this, let's first add a simple tool that allows to
register short strings inside a global list, these strings happening
to be server names. The strings are either duplicated and stored upon
failure to find them, or just added to this storage. Since file names
are not expected to disappear before the end of the process, for now
we don't even implement refcounting, and we free them all at the end.
There's already a drop_file_name() function to reset the pointer like
ha_free() used to do, and even if not strictly needed it's a good
habit to get used to doing it.
The strings are returned as const so that they're stored as-is in
structs, and that nasty free() calls are easily caught. The pointer
points to the char[] storage inside the node itself. This way later
if we want to implement refcounting, it will be trivial to just look
up a string and change its associated node's refcount. If needed,
comparisons can also be made on pointers.
For now they're not used yet and are released on deinit().
gcc-12 and above report a wrong warning about a negative length being
passed to memcmp() on an impossible code path when built at -O0. The
pattern is the same at a few places, basically:
int foo(int op, const void *a, const void *b, size_t size, size_t arg)
{
if (op == 1) // arg is a strict multiple of size
return memcmp(a, b, arg - size);
return 0;
}
...
int bar()
{
return foo(0, a, b, sizeof(something), 0);
}
It *might* be possible to invent dummy values for the "len" argument
above in the real code, but that significantly complexifies it and as
usual can easily result in introducing undesired bugs.
Here we take a different approach consisting in shutting the
-Wstringop-overread warning on gcc>=12 at -O0 since that's the only
condition that triggers it. The issue was reported to and confirmed by
the gcc team here: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114622
No backport needed, but this should be upstreamed into cebtree after
checking that all involved macros are available.
Now we collect this clock in clock_local_update_date(), the closest from
the poller, which is also used when busy-polling, and the values is set
into the thread's curr_mono_time which did not exist before. Later,
clock_leaving_poll() just sets the prev_mono_time value from the curr_
one instead of retrieving the time at this specific point. It also means
that the monotonic time will now also cover the time needed to update
the global time, which should be negligible. Note that we don't collect
the CPU time in the clock_local_update_date() function even though it's
tempting, because when doing busy-polling, it would be collected on each
round while being useless.
Doing so will make sure that the local time always knows the monotonic
time when it is available.
On a synchronous send from the stream to an applet, if some data were sent,
we must take care to wake the applet up. It is important because if
everything was sent at this stage, there is no other chance to wake the
applet up, mainly because SE_FL_WAIT_DATA flag is set on the applet's sedesc
in sc_update_tx() at the end of process_stream(). This flag prevent any
wakeup of the applet for a send event.
It is not necessary for a mux because the mux stream is called when a
syncrhonous send from the stream is performed. So it is reponsible to wake
the mux connection if necessary.
This patch must be backport to 3.0.
Given that the original list-based version was using a list head as the
root of the variables, while the tree is using a single pointer, it made
sense to reuse that space to place multiple roots, indexed on the lower
bits of the name hash. Two roots slightly increase the performance level,
but the best gain is obtained with 4 roots. The performance is now always
above that of the list, even with small counts, and with 100 vars, it's
21% higher than before, or 67% higher than with the list.
We keep the same lock (it could have made sense to use one lock per head),
because most of the variables in large configs are attached to a stream
or a session, hence are not shared between threads. Thus there's no point
in sharding the pointer.
Configs involving many variables can start to eat a lot of CPU in name
lookups. The reason is that the names themselves are dynamic in that
they are relative to dynamic objects (sessions, streams, etc), so
there's no fixed index for example. The current implementation relies
on a standard linked list, and in order to speed up lookups and avoid
comparing strings, only a 64-bit hash of the variable's name is stored
and compared everywhere.
But with just 100 variables and 1000 accesses in a config, it's clearly
visible that variable name lookup can reach 56% CPU with a config
generated this way:
for i in {0..100}; do
printf "\thttp-request set-var(txn.var%04d) int(%d)" $i $i;
for j in {1..10}; do [ $i -lt $j ] || printf ",add(txn.var%04d)" $((i-j)); done;
echo;
done
The performance and a 4-core skylake 4.4 GHz reaches 85k RPS with a perf
profile showing:
Samples: 170K of event 'cycles', Event count (approx.): 142378815419
Overhead Shared Object Symbol
56.39% haproxy [.] var_to_smp
6.65% haproxy [.] var_set.part.0
5.76% haproxy [.] sample_process_cnv
3.23% haproxy [.] sample_conv_var2smp
2.88% haproxy [.] sample_conv_arith_add
2.33% haproxy [.] __pool_alloc
2.19% haproxy [.] action_store
2.13% haproxy [.] vars_get_by_desc
1.87% haproxy [.] smp_dup
[above, var_to_smp() calls var_get() under the read lock].
By switching to a binary tree, the cost is significantly lower, the
performance reaches 117k RPS (+37%) with this profile:
Samples: 170K of event 'cycles', Event count (approx.): 142323631229
Overhead Shared Object Symbol
40.22% haproxy [.] cebu64_lookup
7.12% haproxy [.] sample_process_cnv
6.15% haproxy [.] var_to_smp
4.75% haproxy [.] cebu64_insert
3.79% haproxy [.] sample_conv_var2smp
3.40% haproxy [.] cebu64_delete
3.10% haproxy [.] sample_conv_arith_add
2.36% haproxy [.] action_store
2.32% haproxy [.] __pool_alloc
2.08% haproxy [.] vars_get_by_desc
1.96% haproxy [.] smp_dup
1.75% haproxy [.] var_set.part.0
1.74% haproxy [.] cebu64_first
1.07% [kernel] [k] aq_hw_read_reg
1.03% haproxy [.] pool_put_to_cache
1.00% haproxy [.] sample_process
The performance lowers a bit earlier than with the list however. What
can be seen is that the performance maintains a plateau till 25 vars,
starts degrading a little bit for the tree while it remains stable till
28 vars for the list. Then both cross at 42 vars and the list continues
to degrade doing a hyperbole while the tree resists better. The biggest
loss is at around 32 variables where the list stays 10% higher.
Regardless, given the extremely narrow band where the list is better, it
looks relevant to switch to this in order to preserve the almost linear
performance of large setups. For example at 1000 variables and 10k
lookups, the tree is 18 times faster than the list.
In addition this reduces the size of the struct vars by 8 bytes since
there's a single pointer, though it could make sense to re-invest them
into a secondary head for example.
This is an import of the compact elastic binary trees at commit
a9cd84a ("OPTIM: descent: better prefetch less and for writes when
deleting")
These will be used to replace certain lists (and possibly certain
tree nodes as well). They're as fast (or even faster) than ebtrees
for lookups, as fast for insertion and slower for deletion, and a
node only uses 2 pointers (like a list).
The only changes were cebtree.h where common/tools.h was replaced
with ebtree.h which we already have and already provides the needed
functions and macros, and the addition of a wrapper cebtree-prv.h in
src/ to redirect to import/cebtree-prv.h.
All callers of vars_prune_* currently check the list for emptiness.
Let's leave that to vars_prune() itself, it will ease some changes in
the code. Thanks to the previous inlining of the vars_prune() function,
there's no performance loss, and even a very tiny 0.1% gain.
As unveiled in GH issue #2711, commit 5541d4995d ("BUG/MEDIUM: queue:
deal with a rare TOCTOU in assign_server_and_queue()") does have some
side effects in that it can occasionally cause an endless loop.
As Christopher analysed it, the problem is that process_srv_queue(),
which uses a trylock in order to leave only one thread in charge of
the dequeueing process, can lose the lock race against pendconn_add().
If this happens on the last served request, then there's no more thread
to deal with the dequeuing, and assign_server_and_queue() will loop
forever on a condition that was initially exepected to be extremely
rare (and still is, except that now it can become sticky). Previously
what was happening is that such queued requests would just time out
and since that was very rare, nobody would notice.
The root of the problem really is that trylock. It was added so that
only one thread dequeues at a time but it doesn't offer only that
guarantee since it also prevents a thread from dequeuing if another
one is in the process of queuing. We need a different criterion.
What we're doing now is to set a flag "dequeuing" in the server, which
indicates that one thread is currently in the process of dequeuing
requests. This one is atomically tested, and only if no thread is in
this process, then the thread grabs the queue's lock and dequeues.
This way it will be serialized with pendconn_add() and no request
addition will be missed.
It is not certain whether the original race covered by the fix above
can still happen with this change, so better keep that fix for now.
Thanks to @Yenya (Jan Kasprzak) for the precise and complete report
allowing to spot the problem.
This patch should be backported wherever the patch above was backported.
Since c5959fd ("MEDIUM: pattern: merge same pattern"), UAF (leading to
crash) can be experienced if the same pattern file (and match method) is
used in two default sections and the first one is not referenced later in
the config. In this case, the first default section will be cleaned up.
However, due to an unhandled case in the above optimization, the original
expr which the second default section relies on is mistakenly freed.
This issue was discovered while trying to reproduce GH #2708. The issue
was particularly tricky to reproduce given the config and sequence
required to make the UAF happen. Hopefully, Github user @asmnek not only
provided useful informations, but since he was able to consistently
trigger the crash in his environment he was able to nail down the crash to
the use of pattern file involved with 2 named default sections. Big thanks
to him.
To fix the issue, let's push the logic from c5959fd a bit further. Instead
of relying on "do_free" variable to know if the expression should be freed
or not (which proved to be insufficient in our case), let's switch to a
simple refcounting logic. This way, no matter who owns the expression, the
last one attempting to free it will be responsible for freeing it.
Refcount is implemented using a 32bit value which fills a previous 4 bytes
structure gap:
int mflags; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
long unsigned int lock; /* 88 8 */
(output from pahole)
Even though it was not reproduced in 2.6 or below by @asmnek (the bug was
revealed thanks to another bugfix), this issue theorically affects all
stable versions (up to c5959fd), thus it should be backported to all
stable versions.
Allow the user to set the "initial state" of a server.
Context:
Servers are always set in an UP status by default. In
some cases, further checks are required to determine if the server is
ready to receive client traffic.
This introduces the "init-state {up|down}" configuration parameter to
the server.
- when set to 'fully-up', the server is considered immediately available
and can turn to the DOWN sate when ALL health checks fail.
- when set to 'up' (the default), the server is considered immediately
available and will initiate a health check that can turn it to the DOWN
state immediately if it fails.
- when set to 'down', the server initially is considered unavailable and
will initiate a health check that can turn it to the UP state immediately
if it succeeds.
- when set to 'fully-down', the server is initially considered unavailable
and can turn to the UP state when ALL health checks succeed.
The server's init-state is considered when the HAProxy instance
is (re)started, a new server is detected (for example via service
discovery / DNS resolution), a server exits maintenance, etc.
Link: https://github.com/haproxy/haproxy/issues/51
Add a factor parameter to stick-tables, called "brates-factor", that is
applied to in/out bytes rates to work around the 32-bits limit of the
frequency counters. Thanks to this factor, it is possible to have bytes
rates beyond the 4GB. Instead of counting each bytes, we count blocks
of bytes. Among other things, it will be useful for the bwlim filter, to be
able to configure shared limit exceeding the 4GB/s.
For now, this parameter must be in the range ]0-1024].
Multipath TCP (MPTCP), standardized in RFC8684 [1], is a TCP extension
that enables a TCP connection to use different paths.
Multipath TCP has been used for several use cases. On smartphones, MPTCP
enables seamless handovers between cellular and Wi-Fi networks while
preserving established connections. This use-case is what pushed Apple
to use MPTCP since 2013 in multiple applications [2]. On dual-stack
hosts, Multipath TCP enables the TCP connection to automatically use the
best performing path, either IPv4 or IPv6. If one path fails, MPTCP
automatically uses the other path.
To benefit from MPTCP, both the client and the server have to support
it. Multipath TCP is a backward-compatible TCP extension that is enabled
by default on recent Linux distributions (Debian, Ubuntu, Redhat, ...).
Multipath TCP is included in the Linux kernel since version 5.6 [3]. To
use it on Linux, an application must explicitly enable it when creating
the socket. No need to change anything else in the application.
This attached patch adds MPTCP per address support, to be used with:
mptcp{,4,6}@<address>[:port1[-port2]]
MPTCP v4 and v6 protocols have been added: they are mainly a copy of the
TCP ones, with small differences: names, proto, and receivers lists.
These protocols are stored in __protocol_by_family, as an alternative to
TCP, similar to what has been done with QUIC. By doing that, the size of
__protocol_by_family has not been increased, and it behaves like TCP.
MPTCP is both supported for the frontend and backend sides.
Also added an example of configuration using mptcp along with a backend
allowing to experiment with it.
Note that this is a re-implementation of Bjrn's work from 3 years ago
[4], when haproxy's internals were probably less ready to deal with
this, causing his work to be left pending for a while.
Currently, the TCP_MAXSEG socket option doesn't seem to be supported
with MPTCP [5]. This results in a warning when trying to set the MSS of
sockets in proto_tcp:tcp_bind_listener.
This can be resolved by adding two new variables:
sock_inet(6)_mptcp_maxseg_default that will hold the default
value of the TCP_MAXSEG option. Note that for the moment, this
will always be -1 as the option isn't supported. However, in the
future, when the support for this option will be added, it should
contain the correct value for the MSS, allowing to correctly
set the TCP_MAXSEG option.
Link: https://www.rfc-editor.org/rfc/rfc8684.html [1]
Link: https://www.tessares.net/apples-mptcp-story-so-far/ [2]
Link: https://www.mptcp.dev [3]
Link: https://github.com/haproxy/haproxy/issues/1028 [4]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/515 [5]
Co-authored-by: Dorian Craps <dorian.craps@student.vinci.be>
Co-authored-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Add a new field alt_proto to the server structures that
specify if an alternate protocol should be used for this server.
This field can be transparently passed to protocol_lookup to get
an appropriate protocol structure.
This change allows thus to create servers with different protocols,
and not only TCP anymore.
Add a new parameter "alt" that will store wether this configuration
use an alternate protocol.
This alt pointer will contain a value that can be transparently
passed to protocol_lookup to obtain an appropriate protocol structure.
This change is needed to allow for example the servers to know if it
need to use an alternate protocol or not.
It has been reported by Wedl Michael, a student at the University of Applied
Sciences St. Poelten, a potential vulnerability into haproxy as described below.
An attacker could have obtained a TLS session ticket after having established
a connection to an haproxy QUIC listener, using its real IP address. The
attacker has not even to send a application level request (HTTP3). Then
the attacker could open a 0-RTT session with a spoofed IP address
trusted by the QUIC listen to bypass IP allow/block list and send HTTP3 requests.
To mitigate this vulnerability, one decided to use a token which can be provided
to the client each time it successfully managed to connect to haproxy. These
tokens may be reused for future connections to validate the address/path of the
remote peer as this is done with the Retry token which is used for the current
connection, not the next one. Such tokens are transported by NEW_TOKEN frames
which was not used at this time by haproxy.
So, each time a client connect to an haproxy QUIC listener with 0-RTT
enabled, it is provided with such a token which can be reused for the
next 0-RTT session. If no such a token is presented by the client,
haproxy checks if the session is a 0-RTT one, so with early-data presented
by the client. Contrary to the Retry token, the decision to refuse the
connection is made only when the TLS stack has been provided with
enough early-data from the Initial ClientHello TLS message and when
these data have been accepted. Hopefully, this event arrives fast enough
to allow haproxy to kill the connection if some early-data have been accepted
without token presented by the client.
quic_build_post_handshake_frames() has been modified to build a NEW_TOKEN
frame with this newly implemented token to be transported inside.
quic_tls_derive_retry_token_secret() was renamed to quic_do_tls_derive_token_secre()
and modified to be reused and derive the secret for the new token implementation.
quic_token_validate() has been implemented to validate both the Retry and
the new token implemented by this patch. When this is a non-retry token
which could not be validated, the datagram received is marked as requiring
a Retry packet to be sent, and no connection is created.
When the Initial packet does not embed any non-retry token and if 0-RTT is enabled
the connection is marked with this new flag: QUIC_FL_CONN_NO_TOKEN_RCVD. As soon
as the TLS stack detects that some early-data have been provided and accepted by
the client, the connection is marked to be killed (QUIC_FL_CONN_TO_KILL) from
ha_quic_add_handshake_data(). This is done calling qc_ssl_eary_data_accepted()
new function. The secret TLS handshake is interrupted as soon as possible returnin
0 from ha_quic_add_handshake_data(). The connection is also marked as
requiring a Retry packet to be sent (QUIC_FL_CONN_SEND_RETRY) from
ha_quic_add_handshake_data(). The the handshake I/O handler (quic_conn_io_cb())
knows how to behave: kill the connection after having sent a Retry packet.
About TLS stack compatibility, this patch is supported by aws-lc. It is
disabled for wolfssl which does not support 0-RTT at this time thanks
to HAVE_SSL_0RTT_QUIC.
This patch depends on these commits:
MINOR: quic: Add trace for QUIC_EV_CONN_IO_CB event.
MINOR: quic: Implement qc_ssl_eary_data_accepted().
MINOR: quic: Modify NEW_TOKEN frame structure (qf_new_token struct)
BUG/MINOR: quic: Missing incrementation in NEW_TOKEN frame builder
MINOR: quic: Token for future connections implementation.
MINOR: quic: Implement quic_tls_derive_token_secret().
MINOR: tools: Implement ipaddrcpy().
Must be backported as far as 2.6.
This function is a wrapper around SSL_get_early_data_status() for
OpenSSL derived stack and SSL_early_data_accepted() boringSSL derived
stacks like AWS-LC. It returns true for a TLS server if it has
accepted the early data received from a client.
Also implement quic_ssl_early_data_status_str() which is dedicated to be used
for debugging purposes (traces). This function converts the enum returned
by the two function mentionned above to a human readable string.
Modify qf_new_token structure to use a static buffer with QUIC_TOKEN_LEN
as size as defined by the token for future connections (quic_token.c).
Modify consequently the NEW_TOKEN frame parser (see quic_parse_new_token_frame()).
Also add comments to denote that the NEW_TOKEN parser function is used only by
clients and that its builder is used only by servers.
There exist two sorts of token used by QUIC. They are both used to validate
the peer address (path validation). Retry are used for the current
connection the client want to open. This patch implement the other
sort of tokens which after having been received from a connection, may
be provided for the next connection from the same IP address to validate
it (or validate the network path between the client and the server).
The token generation is implemented by quic_generate_token(), and
the token validation by quic_token_chek(). The same method
is used as for Retry tokens to build such tokens to be reused for
future connections. The format is very simple: one byte for the format
identifier to distinguish these new tokens for the Retry token, followed
by a 32bits timestamps. As this part is ciphered with AEAD as cryptographic
algorithm, 16 bytes are needed for the AEAD tag. 16 more random bytes
are added to this token and a salt to derive the AEAD secret used
to cipher the token. In addition to this salt, this is the client IP address
which is used also as AAD to derive the AEAD secret. So, the length of
the token is fixed: 37 bytes.
This is function is similar to quic_tls_derive_retry_token_secret().
Its aim is to derive the secret used to cipher the token to be used
for future connections.
This patch renames quic_tls_derive_retry_token_secret() to a more
and reuses its code to produce a more generic one: quic_do_tls_derive_token_secret().
Two arguments are added to this latter to produce both quic_tls_derive_retry_token_secret()
and quic_tls_derive_token_secret() new function which calls
quic_do_tls_derive_token_secret().
There was a typo in the macro name, where LENGTH was incorrectly
written. This didn't cause any issue because the typo appeared in all
occurrences in the codebase.
Support for 429 was recently added to L7 retries (0d142e075 "MINOR: proxy:
Add support of 429-Too-Many-Requests in retry-on status"). But the
l7_status_match() function was not properly updated. The switch statement
must match the 429 status to be able to perform a L7 retry.
This patch must be backported if the commit above is backported. It is
related to #2687.
The "429" status can now be specified on retry-on directives. PR_RE_* flags
were updated to remains sorted.
This patch should fix the issue #2687. It is quite simple so it may safely
be backported to 3.0 if necessary.
Activate the capture of the TLS signature_algorithms extension from the
Client Hello. This list is stored in the ssl_capture buffer when the
global option "tune.ssl.capture-cipherlist-size" is enabled.
Activate the capture of the TLS supported_versions extension from the
Client Hello. This list is stored in the ssl_capture buffer when the
global option "tune.ssl.capture-cipherlist-size" is enabled.
This patch is the follow-up of 1811d2a6ba (MINOR: tools: add helpers to
backup/clean/restore env).
In order to avoid unexpected behaviour in master-worker mode during the process
reload with a new configuration, when the old one has contained '*env' keywords,
let's backup its initial environment before calling parse_cfg() and let's clean
and restore it in the context of master process, just before it enters in a wait
polling loop.
This will garantee that new workers will have a new updated environment and not
the previous one inherited from the master, which does not read the configuration,
when it's in a wait-mode.
'setenv', 'presetenv', 'unsetenv', 'resetenv' keywords in configuration could
modify the process runtime environment. In case of master-worker mode this
creates a problem, as the configuration is read only once before the forking a
worker and then the master process does the reexec without reading any config
files, just to free the memory. So, during the reload a new worker process will
be created, but it will inherited the previous unchanged environment from the
master in wait mode, thus it won't benefit the changes in configuration,
related to '*env' keywords. This may cause unexpected behavior or some parser
errors in master-worker mode.
So, let's add a helper to backup all process env variables just before it will
read its configuration. And let's also add helpers to clean up the current
runtime environment and to restore it to its initial state (as it was before
parsing the config).
For custom families, there's sometimes an underlying real address and
it would be nice to be able to directly use the real family in calls
to bind() and connect() without having to add explicit checks for
exceptions everywhere.
Let's add a .real_family field to struct proto_fam for this. For now
it's always equal to the family except for non-transferable ones such
as rhttp where it's equal to the custom one (anything else could fit).
At plenty of places we have access to an address family which may
include some custom addresses but we cannot simply convert them to
the real families without performing some random protocol lookups.
Let's simply add a proto_fam table like we have for the protocols.
The protocols could even be indexed there, but for now it's not worth
it.
When we finally split sock_domain from sock_family in 2.3, something
was not cleanly finished. The family is what should be stored in the
address while the domain is what is supposed to be passed to socket().
But for the custom addresses, we did the opposite, just because the
protocol_lookup() function was acting on the domain, not the family
(both of which are equal for non-custom addresses).
This is an API bug but there's no point backporting it since it does
not have visible effects. It was visible in the code since a few places
were using PF_UNIX while others were comparing the domain against AF_MAX
instead of comparing the family.
This patch clarifies this in the comments on top of proto_fam, addresses
the indexing issue and properly reconfigures the two custom families.
Tests performed between a 1 Gbps connected server and a 100 mbps client,
distant by 95ms showed that:
- we need 1.1 MB in flight to fill the link
- rare but inevitable losses are sufficient to make cubic's window
collapse fast and long to recover
- a 100 MB object takes 69s to download
- tolerance for 1 loss between two ACKs suffices to shrink the download
time to 20-22s
- 2 losses go to 17-20s
- 4 losses reach 14-17s
At 100 concurrent connections that fill the server's link:
- 0 loss tolerance shows 2-3% losses
- 1 loss tolerance shows 3-5% losses
- 2 loss tolerance shows 10-13% losses
- 4 loss tolerance shows 23-29% losses
As such while there can be a significant gain sometimes in setting this
tolerance above zero, it can also significantly waste bandwidth by sending
far more than can be received. While it's probably not a solution to real
world problems, it repeatedly proved to be a very effective troubleshooting
tool helping to figure different root causes of low transfer speeds. In
spirit it is comparable to the no-cc congestion algorithm, i.e. it must
not be used except for experimentation.
Upon loss detection, qc_release_lost_pkts() notifies congestion
controllers about the event and its final time. However it does not
pass the number of lost packets, that can provide useful hints for
some controllers. Let's just pass this option.
Previous commit switch to small buffers for HTTP/3 HEADERS emission.
This ensures that several parallel streams can allocate their own buffer
without hitting the connection buffer limit based now on the congestion
window size.
However, this prevents the transmission of responses with uncommonly
large headers. Indeed, if all headers cannot be encoded in a single
buffer, an error is reported which cause the whole connection closure.
Adjust this by implementing a realloc API exposed by QUIC MUX. This
allows application layer to switch from a small to a default buffer and
restart its processing. This guarantees that again headers not longer
than bufsize can be properly transferred.
This patch extends qc_stream_desc API to be able to allocate small
buffers. QUIC MUX API is similarly updated as ultimatly each application
protocol is responsible to choose between a default or a smaller buffer.
Internally, the type of allocated buffer is remembered via qc_stream_buf
instance. This is mandatory to ensure that the buffer is released in the
correct pool, in particular as small and standard buffers can be
configured with the same size.
This commit is purely an API change. For the moment, small buffers are
not used. This will changed in a dedicated patch.
Define a new buffer pool reserved to allocate smaller memory area. For
the moment, its usage will be restricted to QUIC, as such it is declared
in quic_stream module.
Add a new config option "tune.bufsize.small" to specify the size of the
allocated objects. A special check ensures that it is not greater than
the default bufsize to avoid unexpected effects.
QUIC MUX buffer allocation limit is now directly based on the underlying
congestion window size. previous static limit based on conn-tx-buffers
is now unused. As such, this commit adds a warning to users to prevent
that it is now obsolete.
Secondly, update max-window-size setting. It is now the main entrypoint
to limit both the maximum congestion window size and the number of QUIC
MUX allocated buffer on emission. Remove its special value '0' which was
used to automatically adjust it on now unused conn-tx-buffers.
Each QUIC MUX may allocate buffers for MUX stream emission. These
buffers are then shared with quic_conn to handle ACK reception and
retransmission. A limit on the number of concurrent buffers used per
connection has been defined statically and can be updated via a
configuration option. This commit replaces the limit to instead use the
current underlying congestion window size.
The purpose of this change is to remove the artificial static buffer
count limit, which may be difficult to choose. Indeed, if a connection
performs with minimal loss rate, the buffer count would limit severely
its throughput. It could be increase to fix this, but it also impacts
others connections, even with less optimal performance, causing too many
extra data buffering on the MUX layer. By using the dynamic congestion
window size, haproxy ensures that MUX buffering corresponds roughly to
the network conditions.
Using QCC <buf_in_flight>, a new buffer can be allocated if it is less
than the current window size. If not, QCS emission is interrupted and
haproxy stream layer will subscribe until a new buffer is ready.
One of the criticals parts is to ensure that MUX layer previously
blocked on buffer allocation is properly woken up when sending can be
retried. This occurs on two occasions :
* after an already used Tx buffer is cleared on ACK reception. This case
is already handled by qcc_notify_buf() via quic_stream layer.
* on congestion window increase. A new qcc_notify_buf() invokation is
added into qc_notify_send().
Finally, remove <avail_bufs> QCC field which is now unused.
This commit is labelled MAJOR as it may have unexpected effect and could
cause significant behavior change. For example, in previous
implementation QUIC MUX would be able to buffer more data even if the
congestion window is small. With this patch, data cannot be transferred
from the stream layer which may cause more streams to be shut down on
client timeout. Another effect may be more CPU consumption as the
connection limit would be hit more often, causing more streams to be
interrupted and woken up in cycle.
Define a new QCC counter named <buf_in_flight>. Its purpose is to
account the current sum of all allocated stream buffer size used on
emission.
For this moment, this counter is updated and buffer allocation and
deallocation. It will be used to replace <avail_bufs> once congestion
window is used as limit for buffer allocation in a future commit.
Define a new qc_stream_desc flag QC_SD_FL_OOB_BUF. This is to mark
streams which are not subject to the connection limit on allocated MUX
stream buffer.
The purpose is to simplify handling of QUIC MUX streams which do not
transfer data and as such are not driven by haproxy layer, for example
HTTP/3 control stream. These streams interacts synchronously with QUIC
MUX and cannot retry emission in case of temporary failure.
This commit will be useful once connection buffer allocation limit is
reimplemented to directly rely on the congestion window size. This will
probably cause the buffer limit to be reached more frequently, maybe
even on QUIC MUX initialization. As such, it will be possible to mark
control streams and prevent them to be subject to the buffer limit.
QUIC MUX expose a new function qcs_send_metadata(). It can be used by an
application protocol to specify which streams are used for control
exchanges. For the moment, no such stream use this mechanism.
A limit per connection is put on the number of buffers allocated by QUIC
MUX for emission accross all its streams. This ensures memory
consumption remains under control. This limit is simply explained as a
count of buffers which can be concurrently allocated for each
connection.
As such, quic_conn structure was used to account currently allocated
buffers. However, a quic_conn nevers allocates new stream buffers. This
is only done at QUIC MUX layer. As such, this commit moves buffer
accounting inside QCC structure. This simplifies the API, most notably
qc_stream_buf_alloc() usage.
Note that this commit inverts the accounting. Previously, it was
initially set to 0 and increment for each allocated buffer. Now, it is
set to the maximum value and decrement for each buf usage. This is
considered as clearer to use.
Define a new global keyword tune.quic.frontend.max-window-size. This
allows to set globally the maximum congestion window size for each QUIC
frontend connections.
The default value is 0. It is a special value which automatically derive
the size from the configured QUIC connection buffer limit. This is
similar to the previous "quic-cc-algo" behavior, which can be used to
override the maximum window size per bind line.
load_cfg_in_mem() can continuously reallocate memory in order to load an
extremely large input from /dev/stdin, until it fails with ENOMEM, which means
that process has consumed all available RAM. In case of containers and
virtualized environments it's not very good.
So, in order to prevent this, let's introduce MAX_CFG_SIZE as 10MB, which will
limit the size of input supplied via /dev/stdin.
Some systems require log formats in the CLF format and that meant that I
could not send my logs for proxies in mode tcp to those servers. This
implements a format that uses log variables that are compatble with TCP
mode frontends and replaces traditional HTTP values in the CLF format
to make them stand out. Instead of logging method and URI like this
"GET /example HTTP/1.1" it will log "TCP " and for a response code I
used "000" so it would be easy to separate from legitimate HTTP
traffic. Now your log servers that require a CLF format can see the
timings for TCP traffic as well as HTTP.
It is now possible to use "drop" keyword for "on" lines under a
log-profile section to specify that no log at all should be emitted for
the specified step (setting an empty format was not sufficient to do so
because only the log payload would be empty, not the log header, thus the
log would still be emitted).
It may be useful to selectively disable logging at specific steps for a
given log target (since the log profile may be set on log directives):
log-profile myprof
on request format "blabla" sd "custom sd"
on response drop
New testcase was added to reg-tests/log/log_profiles.vtc
ci_insert() is a function which allows to insert a string <str> of size
<len> at <pos> of the input buffer. This is the equivalent of
ci_insert_line2() but without inserting '\r\n'
As readcfgfile no longer opens configuration files and reads them with fgets,
but performs only the parsing of provided data, let's rename it to parse_cfg by
analogy with read_cfg in haproxy.c.
Let's call load_cfg_in_ram() helper for each configuration file to load it's
content in some area in memory. Adapt readcfgfile() parser function
respectively. In order to limit changes in its scope we give as an argument a
cfgfile structure, already filled in init_args() and in load_cfg_in_ram() with
file metadata and content.
Parser function (readcfgfile()) uses now fgets_from_mem() instead of standard
fgets from libc implementations.
SPOE filter parses its own configuration file, pointed by 'config' keyword in
the configuration already loaded in memory. So, let's allocate and fill for
this a supplementary cfgfile structure, which is not referenced in cfg_cfgfiles
list. This structure and the memory with content of SPOE filter configuration
are freed immediately in parse_spoe_flt(), when readcfgfile() returns.
HAProxy OpenTracing filter also uses its own configuration file. So, let's
follow the same logic as we do for SPOE filter.
Add fgets_from_mem() helper to read lines from configuration files, stored now
as memory chunks. In order to limit changes in the first-level parser code
(readcfgfile()), it is better to reimplement the standard fgets, i.e. to
have a fgets, which can read the serialized data line by line from some memory
area, instead of file stream, and can keep the same behaviour as libc
implementations fgets.
list_append_word() helper was used before only to chain configuration file names
in a list. As now we start to use cfgfile structure which represents entire file
in memory and its metadata, let's adapt this helper to use this structure and
let's rename it to list_append_cfgfile().
Adapt functions, which process configuration files and directories to use
cfgfile structure and list_append_cfgfile() instead of wordlist.
This and following commits serve to prepare loading configuration files in
memory, before parsing them, as we may need to parse some parts of
configuration in different moments of the startup sequence. This is a case of
the new master-worker initialization process. Here we need to read at first
only the global and the program sections and only after some steps
(forking worker, etc) the rest of the configuration.
Add a new structure cfgfile to keep configuration files metadata and content,
loaded somewhere in a memory. Instances of filled cfgfile structures could be
chained in a list, as the order in which they were loaded is important.
We now have a trace_ctx to hold the sess, conn, qc, stream and so on.
This will allow us to pass it across layers so that other helpers can
help fill them.
Ideally it should be passed as an argument to __trace_enabled() by
__trace() so that it can be passed back to the trace callback. But
it seems that trace callbacks are smart enough to figure all their
info when they need them.
With "follow" from one source to another, it becomes possible for a
source to automatically follow another source's tracked pointer. The
best example is the session:
- the "session" source is enabled and has a "lockon session"
-> its lockon_ptr is equal to the session when valid
- other sources (h1,h2,h3 etc) are configured for "follow session"
and will then automatically check if session's lockon_ptr matches
its own session, in which case tracing will be enabled for that
trace (no state change).
It's not necessary to start/pause/stop traces when using this, only
"follow" followed by a source with lockon enabled is needed. Some
combinations might work better than others. At the moment the session
is almost never known from the backend, but this may improve.
The meta-source "all" is supported for the follower so that all sources
will follow the tracked one.
Reuse newly defined tot_time structure to measure various values related
to a QCS lifetime.
First, a timer is used to comptabilize the total QCS lifetime. Then, two
other timers are used to account the total time during which Tx from
stream layer to MUX is blocked, either on lack of buffer or due to
flow-control.
These three timers are reported in qmux_dump_qcs_info(). Thus, they are
available in traces and for QUIC MUX debug string sample.
Define a new utility type tot_time. Its purpose is to be able to account
elapsed time accross multiple periods. Functions are defined to easily
start and stop measures, and return the current value.
Define a new xprt_ops callback named dump_info. This can be used to
extend MUX debug string with infos from the lower layer.
Implement dump_info for QUIC stack. For now, only minimal info are
reported : bytes in flight and size of the sending window. This should
allow to detect if the congestion controller is fine. These info are
reported via QUIC MUX debug string sample.
Extract trace code to dump QCC and QCS instances into dedicated
functions named qmux_dump_qc{c,s}_info(). This will allow to easily
print QCC/QCS infos outside of traces.
These are passed to the underlying mux to retrieve debug information
at the mux level (stream/connection) as a string that's meant to be
added to logs.
The API is quite complex just because we can't pass any info to the
bottom function. So we construct a union and pass the argument as an
int, and expect the callee to fill that with its buffer in return.
Most likely the mux->ctl and ->sctl API should be reworked before
the release to simplify this.
The functions take an optional argument that is a bit mask of the
layers to dump:
muxs=1
muxc=2
xprt=4
conn=8
sock=16
The default (0) logs everything available.
STREAM frames have dedicated handling on retransmission. A special check
is done to remove data already acked in case of duplicated frames, thus
only unacked data are retransmitted.
This handling is faulty in case of an empty STREAM frame with FIN set.
On retransmission, this frame does not cover any unacked range as it is
empty and is thus discarded. This may cause the transfer to freeze with
the client waiting indefinitely for the FIN notification.
To handle retransmission of empty FIN STREAM frame, qc_stream_desc layer
have been extended. A new flag QC_SD_FL_WAIT_FOR_FIN is set by MUX QUIC
when FIN has been transmitted. If set, it prevents qc_stream_desc to be
freed until FIN is acknowledged. On retransmission side,
qc_stream_frm_is_acked() has been updated. It now reports false if
FIN bit is set on the frame and qc_stream_desc has QC_SD_FL_WAIT_FOR_FIN
set.
This must be backported up to 2.6. However, this modifies heavily
critical section for ACK handling and retransmission. As such, it must
be backported only after a period of observation.
This issue can be reproduced by using the following socat command as
server to add delay between the response and connection closure :
$ socat TCP-LISTEN:<port>,fork,reuseaddr,crlf SYSTEM:'echo "HTTP/1.1 200 OK"; echo ""; sleep 1;'
On the client side, ngtcp2 can be used to simulate packet drop. Without
this patch, connection will be interrupted on QUIC idle timeout or
haproxy client timeout with ERR_DRAINING on ngtcp2 :
$ ngtcp2-client --exit-on-all-streams-close -r 0.3 <host> <port> "http://<host>:<port>/?s=32o"
Alternatively to ngtcp2 random loss, an extra haproxy patch can also be
used to force skipping the emission of the empty STREAM frame :
diff --git a/include/haproxy/quic_tx-t.h b/include/haproxy/quic_tx-t.h
index efbdfe687..1ff899acd 100644
--- a/include/haproxy/quic_tx-t.h
+++ b/include/haproxy/quic_tx-t.h
@@ -26,6 +26,8 @@ extern struct pool_head *pool_head_quic_cc_buf;
/* Flag a sent packet as being probing with old data */
#define QUIC_FL_TX_PACKET_PROBE_WITH_OLD_DATA (1UL << 5)
+#define QUIC_FL_TX_PACKET_SKIP_SENDTO (1UL << 6)
+
/* Structure to store enough information about TX QUIC packets. */
struct quic_tx_packet {
/* List entry point. */
diff --git a/src/quic_tx.c b/src/quic_tx.c
index 2f199ac3c..2702fc9b9 100644
--- a/src/quic_tx.c
+++ b/src/quic_tx.c
@@ -318,7 +318,7 @@ static int qc_send_ppkts(struct buffer *buf, struct ssl_sock_ctx *ctx)
tmpbuf.size = tmpbuf.data = dglen;
TRACE_PROTO("TX dgram", QUIC_EV_CONN_SPPKTS, qc);
- if (!skip_sendto) {
+ if (!skip_sendto && !(first_pkt->flags & QUIC_FL_TX_PACKET_SKIP_SENDTO)) {
int ret = qc_snd_buf(qc, &tmpbuf, tmpbuf.data, 0, gso);
if (ret < 0) {
if (gso && ret == -EIO) {
@@ -354,6 +354,7 @@ static int qc_send_ppkts(struct buffer *buf, struct ssl_sock_ctx *ctx)
qc->cntrs.sent_bytes_gso += ret;
}
}
+ first_pkt->flags &= ~QUIC_FL_TX_PACKET_SKIP_SENDTO;
b_del(buf, dglen + QUIC_DGRAM_HEADLEN);
qc->bytes.tx += tmpbuf.data;
@@ -2066,6 +2067,17 @@ static int qc_do_build_pkt(unsigned char *pos, const unsigned char *end,
continue;
}
+ switch (cf->type) {
+ case QUIC_FT_STREAM_8 ... QUIC_FT_STREAM_F:
+ if (!cf->stream.len && (qc->flags & QUIC_FL_CONN_TX_MUX_CONTEXT)) {
+ TRACE_USER("artificially drop packet with empty STREAM frame", QUIC_EV_CONN_TXPKT, qc);
+ pkt->flags |= QUIC_FL_TX_PACKET_SKIP_SENDTO;
+ }
+ break;
+ default:
+ break;
+ }
+
quic_tx_packet_refinc(pkt);
cf->pkt = pkt;
}
