The pretty confusing "buffer.h" was in fact not the place to look for
the definition of "struct buffer" but the one responsible for dynamic
buffer allocation. As such it defines the struct buffer_wait and the
few functions to allocate a buffer or wait for one.
This patch moves it renaming it to dynbuf.h. The type definition was
moved to its own file since it's included in a number of other structs.
Doing this cleanup revealed that a significant number of files used to
rely on this one to inherit struct buffer through it but didn't need
anything from this file at all.
Some of them were simply removed as unused (possibly some leftovers
from an older cleanup session), some were turned to haproxy/bitops.h
and a few had to be added (hlua.c and stick-table.h need standard.h
for parse_time_err; htx.h requires chunk.h but used to get it through
standard.h).
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
Fortunately that file wasn't made dependent upon haproxy since it was
integrated, better isolate it before it's too late. Its dependency on
api.h was the result of the change from config.h, which in turn wasn't
correct. It was changed back to stddef.h for size_t and sys/types.h for
ssize_t. The recently added reference to MAX() was changed as it was
placed only to avoid a zero length in the non-free-standing version and
was causing a build warning in the hpack encoder.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
The macros DBG_TRACE_*() can be used instead of existing trace macros to emit
trace messages in debug mode only, ie, when HAProxy is compiled with DEBUG_FULL
or DEBUG_DEV. Otherwise, these macros do nothing. So it is possible to add
traces for development purpose without impacting performance of production
instances.
The detail level initially based on syslog levels is not used, while
something related is missing, trace verbosity, to indicate whether or
not we want to call the decoding callback and what level of decoding
we want (raw captures etc). Let's change the field to "verbosity" for
this. A verbosity of zero means that the decoding callback is not
called, and all other levels are handled by this callback and are
source-specific. The source is now prompted to list the levels that
are proposed to the user. When the source doesn't define anything,
"quiet" and "default" are available.
Working on adding traces to mux-h2 revealed that the function names are
manually copied a lot in developer traces. The reason is that they are
not preprocessor macros and as such cannot be concatenated. Let's
slightly adjust the trace() function call to take a function name just
after the file:line argument. This argument is only added for the
TRACE_DEVEL and 3 new TRACE_ENTER, TRACE_LEAVE, and TRACE_POINT macros
and left NULL for others. This way the function name is only reported
for traces aimed at the developers. The pretty-print callback was also
extended to benefit from this. This will also significantly shrink the
data segment as the "entering" and "leaving" strings will now be merged.
One technical point worth mentioning is that the function name is *not*
passed as an ist to the inline function because it's not considered as
a builtin constant by the compiler, and would lead to strlen() being
run on it from all call places before calling the inline function. Thus
instead we pass the const char * (that the compiler knows where to find)
and it's the __trace() function that converts it to an ist for internal
consumption and for the pretty-print callback. Doing this avoids losing
5-10% peak performance.
The "payload" trace level was ambigous because its initial purpose was
to be able to dump received data. But it doesn't make sense to force to
report data transfers just to be able to report state changes. For
example, all snd_buf()/rcv_buf() operations coming from the application
layer should be tagged at this level. So here we move this payload level
above the state transitions and rename it to avoid the ambiguity making
one think it's only about request/response payload. Now it clearly is
about any data transfer and is thus just below the developer level. The
help messages on the CLI and the doc were slightly reworded to help
remove this ambiguity.
Previously the callback was almost mandatory so it made sense to have it
before the message. Now that it can default to the one declared in the
trace source, most TRACE() calls contain series of empty args and callbacks,
which make them suitable for being at the end and being totally omitted.
This patch thus reverses the TRACE arguments so that the message appears
first, then the mask, then arg1..arg4, then the callback. In practice
we'll mostly see 1 arg, or 2 args and nothing else, and it will not be
needed anymore to pass long series of commas in the middle of the
arguments. However if a source is enforced, the empty commas will still
be needed for all omitted arguments.
The new TRACE_<level>() macros take a mask, 4 args, a callback and a
static message. From this they also inherit the TRACE_SOURCE macro from
the caller, which contains the pointer to the trace source (so that it's
not required to paste it everywhere), and an ist string is also made by
the concatenation of the file name and the line number. This uses string
concatenation by the preprocessor, and turns it into an ist by the compiler
so that there is no operation at all to perform to adjust the data length
as the compiler knows where to cut during the optimization phase. Last,
the message is also automatically turned into an ist so that it's trivial
to put it into an iovec without having to run strlen() on it.
All arguments and the callback may be empty and will then automatically
be replaced with a NULL pointer. This makes the TRACE calls slightly
lighter especially since arguments are not always used. Several other
options were considered to use variadic macros but there's no outstanding
rule that justifies to place an argument before another one, and it still
looks convenient to have the message be the last one to encourage copy-
pasting of the trace statements.
A generic TRACE() macro takes TRACE_LEVEL in from the source file as the
trace level instead of taking it from its name. This may slightly simplify
the production of traces that always run at the same level (internal core
parts may probably only be called at developer level).
The trace() call will support an optional decoding callback and 4
arguments that this function is supposed to know how to use to provide
extra information. The output remains unchanged when the function is
NULL. Otherwise, the message is pre-filled into the thread-local
trace_buf, and the function is called with all arguments so that it
completes the buffer in a readable form depending on the expected
level of detail.
This new "level" argument will allow the trace sources to label the
traces for different purposes, and filter out some of them if they
are not relevant to the current target. Right now we have 5 different
levels:
- USER : the least verbose one, only a few functional information
- PAYLOAD: like user but also displays some payload-related information
- PROTO: focuses on the protocol's framing
- STATE: also indicate state internal transitions or non-transitions
- DEVELOPER: adds extra info about branches taken in the code (break
points, return points)
We now pass an extra argument "where" to the trace() call, which
is supposed to be an ist made of the concatenation of the filename
and the line number. We only keep the last 10 chars from this string
since the end of file names is most often easy to recognize. This
gives developers useful information at very low cost.
For now it remains quite basic. It performs a few state checks, calls
the source's sink if defined, and performs the transitions between
RUNNING, STOPPED and WAITING when the configured events match.
For now it lists the sources if one is not provided, and checks
for the source's existence. It lists the events if not provided,
checks for their existence if provided, and adjusts reported
events/start/stop/pause events, and performs state transitions.
It lists sinks and adjusts them as well. Filters, lock, and
level are not implemented yet.
The principle of this subsystem will be to support taking live traces
at various places in the code with conditional triggers, filters, and
ability to lock on some elements. The traces will support typed events
and will be sent into sinks made of ring buffers, file descriptors or
remote servers.
