This way we don't have any more state specific to a given yieldable
command. The other commands should be easier to move as they only
involve a parser.
It really belongs to proto_http.c since it's a dump for HTTP request
and response errors. Note that it's possible that some parts do not
need to be exported anymore since it really is the only place where
errors are manipulated.
The table dump code was a horrible mess, with common parts interleaved
all the way to deal with the various actions (set/clear/show). A few
error messages were still incorrect, as the "set" operation did not
update them so they would still report "unknown action" (now fixed).
The action was now passed as a private argument to the CLI keyword
which itself is copied into the appctx private field. It's just an
int cast to a pointer.
Some minor issues were noticed while doing this, for example when dumping
an entry by key, if the key doesn't exist, nothing is printed, not even
the table's header. It's unclear whether this was intentional but it
doesn't really match what is done for data-based dumps. It was left
unchanged for now so that a later fix can be backported if needed.
Enum entries STAT_CLI_O_TAB, STAT_CLI_O_CLR and STAT_CLI_O_SET were
removed.
Move the "show info" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_info_to_buffer() function
is now static again. Note, we don't need proto_ssl anymore in cli.c.
Move the "show stat" command to stats.c using the CLI keyword API
to register it on the CLI. The stats_dump_stat_to_buffer() function
is now static again.
Move 'show sess' CLI functions to stream.c and use the cli keyword API
to register it on the CLI.
[wt: the choice of stream vs session makes sense because since 1.6 these
really are streams that we're dumping and not sessions anymore]
Move map and acl CLI functions to map.c and use the cli keyword API to
register actions on the CLI. Then remove the now unused individual
"add" and "del" keywords.
proto/dumpstats.h has been split in 4 files:
* proto/cli.h contains protypes for the CLI
* proto/stats.h contains prototypes for the stats
* types/cli.h contains definition for the CLI
* types/stats.h contains definition for the stats
uint16_t instead of u_int16_t
None ISO fields of struct tm are not present, but
by zeroyfing it, on GNU and BSD systems tm_gmtoff
field will be set.
[wt: moved the memset into each of the date functions]
Setting an FD to -1 when closed isn't the most easily noticeable thing
to do when we're chasing accidental reuse of a stale file descriptor.
Instead set it to that large a negative value that it will overflow the
fdtab and provide an analysable core at the moment the issue happens.
Care was taken to ensure it doesn't overflow nor change sign on 32-bit
machines when multiplied by fdtab, and that it also remains negative for
the various checks that exist. The value equals 0xFDDEADFD which happens
to be easily spotted in a debugger.
This pointer will be used for storing private context. With this,
the same executed function can handle more than one keyword. This
will be very useful for creation Lua cli bindings.
The release function is called when the command is terminated (give
back the hand to the prompt) or when the session is broken (timeout
or client closed).
Commit d7c9196 ("MAJOR: filters: Add filters support") removed sample.h
from proto_http.h, but it has become necessary as of commit fd7edd3
("MINOR: Move http method enum from proto_http to sample") in order
to have HTTP_METH_*. Due to this, the "debug/flags" utility doesn't
build anymore.
A new "option spop-check" statement has been added to enable server health
checks based on SPOP HELLO handshake. SPOP is the protocol used by SPOE filters
to talk to servers.
SPOE makes possible the communication with external components to retrieve some
info using an in-house binary protocol, the Stream Processing Offload Protocol
(SPOP). In the long term, its aim is to allow any kind of offloading on the
streams. This first version, besides being experimental, won't do lot of
things. The most important today is to validate the protocol design and lay the
foundations of what will, one day, be a full offload engine for the stream
processing.
So, for now, the SPOE can offload the stream processing before "tcp-request
content", "tcp-response content", "http-request" and "http-response" rules. And
it only supports variables creation/suppression. But, in spite of these limited
features, we can easily imagine to implement a SSO solution, an ip reputation
service or an ip geolocation service.
Internally, the SPOE is implemented as a filter. So, to use it, you must use
following line in a proxy proxy section:
frontend my-front
...
filter spoe [engine <name>] config <file>
...
It uses its own configuration file to keep the HAProxy configuration clean. It
is also a easy way to disable it by commenting out the filter line.
See "doc/SPOE.txt" for all details about the SPOE configuration.
Now it is possible to use variables attached to a process. The scope name is
'proc'. These variables are released only when HAProxy is stopped.
'tune.vars.proc-max-size' directive has been added to confiure the maximum
amount of memory used by "proc" variables. And because memory accounting is
hierachical for variables, memory for "proc" vars includes memory for "sess"
vars.
New callbacks have been added to handle creation and destruction of filter
instances:
* 'attach' callback is called after a filter instance creation, when it is
attached to a stream. This happens when the stream is started for filters
defined on the stream's frontend and when the backend is set for filters
declared on the stream's backend. It is possible to ignore the filter, if
needed, by returning 0. This could be useful to have conditional filtering.
* 'detach' callback is called when a filter instance is detached from a stream,
before its destruction. This happens when the stream is stopped for filters
defined on the stream's frontend and when the analyze ends for filters defined
on the stream's backend.
In addition, the callback 'stream_set_backend' has been added to know when a
backend is set for a stream. It is only called when the frontend and the backend
are not the same. And it is called for all filters attached to a stream
(frontend and backend).
Finally, the TRACE filter has been updated.
It is very common when validating a configuration out of production not to
have access to the same resolvers and to fail on server address resolution,
making it difficult to test a configuration. This option simply appends the
"none" method to the list of address resolution methods for all servers,
ensuring that even if the libc fails to resolve an address, the startup
sequence is not interrupted.
This will allow a server to automatically fall back to an explicit numeric
IP address when all other methods fail. The address is simply specified in
the address list.
This new setting supports a comma-delimited list of methods used to
resolve the server's FQDN to an IP address. Currently supported methods
are "libc" (use the regular libc's resolver) and "last" (use the last
known valid address found in the state file).
The list is implemented in a 32-bit integer, because each init-addr
method only requires 3 bits. The last one must always be SRV_IADDR_END
(0), allowing to store up to 10 methods in a single 32 bit integer.
Note: the doc is provided at the end of this series.
This adds new "hold" timers : nx, refused, timeout, other. This timers
will be used to tell HAProxy to keep an erroneous response as valid for
the corresponding period. For now they're only configured, not enforced.
This flag has to be set when an IP address resolution fails (either
using libc at start up or using HAProxy's runtime resolver). This will
automatically trigger the administrative status "MAINT", through the
global mask SRV_ADMF_MAINT.
Server addresses are not resolved anymore upon the first pass so that we
don't fail if an address cannot be resolved by the libc. Instead they are
processed all at once after the configuration is fully loaded, by the new
function srv_init_addr(). This function only acts on the server's address
if this address uses an FQDN, which appears in server->hostname.
For now the function does two things, to followup with HAProxy's historical
default behavior:
1. apply server IP address found in server-state file if runtime DNS
resolution is enabled for this server
2. use the DNS resolver provided by the libc
If none of the 2 options above can find an IP address, then an error is
returned.
All of this will be needed to support the new server parameter "init-addr".
For now, the biggest user-visible change is that all server resolution errors
are dumped at once instead of causing a startup failure one by one.
The only reason wurfl/wurfl.h was needed outside of wurfl.c was to expose
wurfl_handle which is a pointer to a structure, referenced by global.h.
By just storing a void* there instead, we can confine all wurfl code to
wurfl.c, which is really nice.
WURFL is a high-performance and low-memory footprint mobile device
detection software component that can quickly and accurately detect
over 500 capabilities of visiting devices. It can differentiate between
portable mobile devices, desktop devices, SmartTVs and any other types
of devices on which a web browser can be installed.
In order to add WURFL device detection support, you would need to
download Scientiamobile InFuze C API and install it on your system.
Refer to www.scientiamobile.com to obtain a valid InFuze license.
Any useful information on how to configure HAProxy working with WURFL
may be found in:
doc/WURFL-device-detection.txt
doc/configuration.txt
examples/wurfl-example.cfg
Please find more information about WURFL device detection API detection
at https://docs.scientiamobile.com/documentation/infuze/infuze-c-api-user-guide
There's no reason to use the stream anymore, only the appctx should be
used by a peer. This was a leftover from the migration to appctx and it
caused some confusion, so let's totally drop it now. Note that half of
the patch are just comment updates.
For active servers, this is the sum of the eweights of all active
servers before this one in the backend, and
[srv->cumulative_weight .. srv_cumulative_weight + srv_eweight) is a
space occupied by this server in the range [0 .. lbprm.tot_wact), and
likewise for backup servers with tot_wbck. This allows choosing a
server or a range of servers proportional to their weight, by simple
integer comparison.
Signed-off-by: Andrew Rodland <andrewr@vimeo.com>
0 will mean no balancing occurs; otherwise it represents the ratio
between the highest-loaded server and the average load, times 100 (i.e.
a value of 150 means a 1.5x ratio), assuming equal weights.
Signed-off-by: Andrew Rodland <andrewr@vimeo.com>
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
This is in order to make integration of tcp-request-session cleaner :
- tcp_exec_req_rules() was renamed tcp_exec_l4_rules()
- LI_O_TCP_RULES was renamed LI_O_TCP_L4_RULES
(LI_O_*'s horrible indent was also fixed and a provision was left
for L5 rules).
To register a new cli keyword, you need to declare a cli_kw_list
structure in your source file:
static struct cli_kw_list cli_kws = {{ },{
{ { "test", "list", NULL }, "test list : do some tests on the cli", test_parsing, NULL },
{ { NULL }, NULL, NULL, NULL, NULL }
}};
And then register it:
cli_register_kw(&cli_kws);
The first field is an array of 5 elements, where you declare the
keywords combination which will match, it must be ended by a NULL
element.
The second field is used as a usage message, it will appear in the help
of the cli, you can set it to NULL if you don't want to show it, it's a
good idea if you want to overwrite some existing keywords.
The two last fields are callbacks.
The first one is used at parsing time, you can use it to parse the
arguments of your keywords and print small messages. The function must
return 1 in case of a failure, otherwise 0:
#include <proto/dumpstats.h>
static int test_parsing(char **args, struct appctx *appctx)
{
struct chunk out;
if (!*args[2]) {
appctx->ctx.cli.msg = "Error: the 3rd argument is mandatory !";
appctx->st0 = STAT_CLI_PRINT;
return 1;
}
chunk_reset(&trash);
chunk_printf(&trash, "arg[3]: %s\n", args[2]);
chunk_init(&out, NULL, 0);
chunk_dup(&out, &trash);
appctx->ctx.cli.err = out.str;
appctx->st0 = STAT_CLI_PRINT_FREE; /* print and free in the default cli_io_handler */
return 0;
}
The last field is the IO handler callback, it can be set to NULL if you
want to use the default cli_io_handler() otherwise you can write your
own. You can use the private pointer in the appctx if you need to store
a context or some data. stats_dump_sess_to_buffer() is a good example of
IO handler, IO handlers often use the appctx->st2 variable for the state
machine. The handler must return 0 in case it have to be recall later
otherwise 1.
With Linux officially introducing SO_REUSEPORT support in 3.9 and
its mainstream adoption we have seen more people running into strange
SO_REUSEPORT related issues (a process management issue turning into
hard to diagnose problems because the kernel load-balances between the
new and an obsolete haproxy instance).
Also some people simply want the guarantee that the bind fails when
the old process is still bound.
This change makes SO_REUSEPORT configurable, introducing the command
line argument "-dR" and the noreuseport configuration directive.
A backport to 1.6 should be considered.
To avoid issues when porting code to some architecture, we need to know
the endianess the structures are currently used.
This patch simply had a short notice before those structures to report
endianess and ease contributor's job.
New DNS response parser function which turn the DNS response from a
network buffer into a DNS structure, much easier for later analysis
by upper layer.
Memory is pre-allocated at start-up in a chunk dedicated to DNS
response store.
New error code to report a wrong number of queries in a DNS response.
struct dns_query_item: describes a DNS query record
struct dns_answer_item: describes a DNS answer record
struct dns_response_packet: describes a DNS response packet
DNS_MIN_RECORD_SIZE: minimal size of a DNS record
DNS_MAX_QUERY_RECORDS: maximum number of query records we allow.
For now, we send one DNS query per request.
DNS_MAX_ANSWER_RECORDS: maximum number of records we may found in a
response
WIP dns: new MAX values
Current implementation of HAProxy's DNS resolution expect only 512 bytes
of data in the response.
Update DNS_MAX_UDP_MESSAGE to match this.
Backport: can be backported to 1.6
Introduction of 3 new server flags to remember if some parameters were set
during configuration parsing.
* SRV_F_CHECKADDR: this server has a check addr configured
* SRV_F_CHECKPORT: this server has a check port configured
* SRV_F_AGENTADDR: this server has a agent addr configured
