Add a new keyword for servers, "idle-timeout". If set, unused connections are
kept alive until the timeout happens, and will be picked for reuse if no
other connection is available.
Instead of just storing the last connection in the session, store all of
the connections, for at most MAX_SRV_LIST (currently 5) targets.
That way we can do keepalive on more than 1 outgoing connection when the
client uses HTTP/2.
In session_free(), make sure the outgoing connection is not in the idle list
anymore, and it does no longer have an owner, so that it will properly be
destroyed and nobody will be able to access it.
When freeing the session, we may fail to free the outgoing connection,
because it still has streams attached. So remove ourself from the session
list, so that the connection doesn't try to access it later.
This commit replaces the explicit pool creation that are made in
constructors with a pool registration. Not only this simplifies the
pools declaration (it can be done on a single line after the head is
declared), but it also removes references to pools from within
constructors. The only remaining create_pool() calls are those
performed in init functions after the config is parsed, so there
is no more user of potentially uninitialized pool now.
It has been the opportunity to remove no less than 12 constructors
and 6 init functions.
If an ALPN (or a NPN) was chosen for a server, defer choosing the mux until
after the SSL handshake is done, and the ALPN/NPN has been negociated, so
that we know which mux to pick.
Do not destroy the connection when we're about to destroy a stream. This
prevents us from doing keepalive on server connections when the client is
using HTTP/2, as a new stream is created for each request.
Instead, the session is now responsible for destroying connections.
When reusing connections, the attach() mux method is now used to create a new
conn_stream.
Introduce a new field in session, "srv_conn", and a linked list of sessions
in the connection. It will be used later when we'll switch connections
from being managed by the stream, to being managed by the session.
The tasks API was changed in 1.9-dev1 with commit 9f6af3322 ("MINOR: tasks:
Change the task API so that the callback takes 3 arguments."), causing the
task's state not to be usable anymore and to have been replaced with an
explicit argument in the callee. The task's state doesn't contain any trace
of the wakeup cause anymore. But there were two places where the old task's
state remained in use :
- sessions, used to more accurately report timeouts in logs when seeing
TASK_WOKEN_TIMEOUT ;
- peers, used to finish resynchronization when seeing TASK_WOKEN_SIGNAL
This commit fixes both occurrences by making sure we don't access task->state
directly (should we rename it by the way ?).
No backport is needed.
It's a bit painful to have to deal with HTTP semantics for each protocol
version (H1 and H2), and working on the version-agnostic code further
emphasizes the problem.
This patch creates http.h and http.c which are agnostic to the version
in use, and which borrow a few parts from proto_http and from h1. For
example the once thought h1-specific h1_char_classes array is in fact
dictated by RFC7231 and is used to parse HTTP headers. A few changes
were made to a few files which were including proto_http.h while they
only needed http.h.
Certain string definitions pre-dated the introduction of indirect
strings (ist) so some were used to simplify the definition of the known
HTTP methods. The current lookup code saves 2 kB of a heavily used table
and is faster than the previous table based lookup (typ. 14 ns vs 16
before).
Sometimes a connection is prepared before the target is set, sometimes
after. There's no real rule since the few functions involved operate on
different and independent fields. Soon we'll benefit from knowing the
target at the connection layer, in order to figure the associated proxy
and retrieve the various parameters (timeouts etc). This patch slightly
reorders a few calls to conn_prepare() so that we can make sure that the
target is always known to the mux.
The handshake processing time used to be stored per stream, which was
valid when there was exactly one stream per session. With H2 and
multiplexing it's not the case anymore and the reported handshake times
are wrong in the logs as it's computed between the TCP accept() and the
stream creation. Let's first move the handshake where it belongs, which
is the session.
However, this is not enough because we don't want to report an excessive
idle time either for H2 (since many requests use the connection).
So the solution used here is to have the stream retrieve sess->tv_accept
and the handshake duration when the stream is created, and let the mux
immediately reset them. This way, the handshake time becomes zero for the
second and subsequent requests in H2 (which was already the case in H1),
and the idle time exactly counts how long the connection remained unused
while it could be used, so in H1 it runs from the end of the previous
response and in H2 it runs from the end of the previous request since the
channel is already available.
This patch will need to be backported to 1.8.
To do so, mux choices are split to handle incoming and outgoing connections in a
different way. The protocol specified on the bind/server line is used in
priority. Then, for frontend connections, the ALPN is retrieved and used to
choose the best mux. For backend connection, there is no ALPN. Finaly, if no
protocol is specified and no protocol matches the ALPN, we fall back on a
default mux, choosing in priority the first mux with exactly the same mode.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
In preparation for thread-specific runqueues, change the task API so that
the callback takes 3 arguments, the task itself, the context, and the state,
those were retrieved from the task before. This will allow these elements to
change atomically in the scheduler while the application uses the copied
value, and even to have NULL tasks later.
When a freshly created session is rejected, for any reason, during the accept in
the function "session_accept_fd", the variable "actconn" is decreased twice. The
first time when the rejected session is released, then in the function
"listener_accpect", because of the failure. So it is possible to have an
negative value for actconn. Note that, in this case, we will also have a negatve
value for the current number of connections on the listener rejecting the
session (actconn and l->nbconn are in/decreased in same time).
It is easy to reproduce the bug with this small configuration:
global
stats socket /tmp/haproxy
listen test
bind *:12345
tcp-request connection reject if TRUE
A "show info" on the stat socket, after a connection attempt, will show a very
high value (the unsigned representation of -1).
To fix the bug, if the function "session_accept_fd" returns an error, it
decrements the right counters and "listener_accpect" leaves them untouched.
This patch must be backported in 1.8.
Some sample fetches check if session is established using
the flag CO_FL_CONNECTED. But in some cases, when a handshake
is performed this flag is set too late, after the process
of the tcp-request session rules.
This fix move the raising of the flag at the beginning of the
conn_complete_session function which processes the tcp-request
session rules.
This fix must be backported to 1.8 (and perhaps 1.7)
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
Now we don't remove the session when a stream dies, instead we
detach the stream and let the mux decide to release the connection
and call session_free() instead.
Since multiple streams can share one session attached to one listener,
the listener_release() call must be done in session_free() and not in
stream_free(), otherwise we end up with a negative count in H2.
This callback will be used to release upper layers when a mux is in
use. Given that the mux can be asynchronously deleted, we need a way
to release the extra information such as the session.
This callback will be called directly by the mux upon releasing
everything and before the connection itself is released, so that
the callee can find its information inside the connection if needed.
The way it currently works is not perfect, and most likely this should
instead become a mux release callback, but for now we have no easy way
to add mux-specific stuff, and since there's one mux per connection,
it works fine this way.
When an incoming connection is made on an HTTP mode frontend, the
session now looks up the mux to use based on the ALPN token and the
proxy mode. This will allow easier mux registration, and we don't
need to hard-code the mux_pt_ops anymore.
For HTTP/2 and QUIC, we'll need to deal with multiplexed streams inside
a connection. After quite a long brainstorming, it appears that the
connection interface to the existing streams is appropriate just like
the connection interface to the lower layers. In fact we need to have
the mux layer in the middle of the connection, between the transport
and the data layer.
A mux can exist on two directions/sides. On the inbound direction, it
instanciates new streams from incoming connections, while on the outbound
direction it muxes streams into outgoing connections. The difference is
visible on the mux->init() call : in one case, an upper context is already
known (outgoing connection), and in the other case, the upper context is
not yet known (incoming connection) and will have to be allocated by the
mux. The session doesn't have to create the new streams anymore, as this
is performed by the mux itself.
This patch introduces this and creates a pass-through mux called
"mux_pt" which is used for all new connections and which only
calls the data layer's recv,send,wake() calls. One incoming stream
is immediately created when init() is called on the inbound direction.
There should not be any visible impact.
Note that the connection's mux is purposely not set until the session
is completed so that we don't accidently run with the wrong mux. This
must not cause any issue as the xprt_done_cb function is always called
prior to using mux's recv/send functions.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
2 global locks have been added to protect, respectively, the run queue and the
wait queue. And a process mask has been added on each task. Like for FDs, this
mask is used to know which threads are allowed to process a task.
For many tasks, all threads are granted. And this must be your first intension
when you create a new task, else you have a good reason to make a task sticky on
some threads. This is then the responsibility to the process callback to lock
what have to be locked in the task context.
Nevertheless, all tasks linked to a session must be sticky on the thread
creating the session. It is important that I/O handlers processing session FDs
and these tasks run on the same thread to avoid conflicts.
When compiled with Openssl >= 1.1.1, before attempting to do the handshake,
try to read any early data. If any early data is present, then we'll create
the session, read the data, and handle the request before we're doing the
handshake.
For this, we add a new connection flag, CO_FL_EARLY_SSL_HS, which is not
part of the CO_FL_HANDSHAKE set, allowing to proceed with a session even
before an SSL handshake is completed.
As early data do have security implication, we let the origin server know
the request comes from early data by adding the "Early-Data" header, as
specified in this draft from the HTTP working group :
https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-replay
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
Commit bcb86ab ("MINOR: session: add a streams field to the session
struct") added this list of streams that is not needed anymore. Let's
get rid of it now.
There are several places where we see feconn++, feconn--, totalconn++ and
an increment on the frontend's number of connections and connection rate.
This is done exactly once per session in each direction, so better take
care of this counter in the session and simplify the callers. At least it
ensures a better symmetry. It also ensures consistency as till now the
lua/spoe/peers frontend didn't have these counters properly set, which can
be useful at least for troubleshooting.
session_accept_fd() may either successfully complete a session creation,
or defer it to conn_complete_session() depending of whether a handshake
remains to be performed or not. The problem is that all the code after
the handshake was duplicated between the two functions.
This patch make session_accept_fd() synchronously call
conn_complete_session() to finish the session creation. It is only needed
to check if the session's task has to be released or not at the end, which
is fairly minimal. This way there is now a single place where the sessions
are created.
Commit 8e3c6ce ("MEDIUM: connection: get rid of data->init() which was
not for data") simplified conn_complete_session() but introduced a
confusing check which cannot happen on CO_FL_HANDSHAKE. Make it clear
that this call is final and will either succeed and complete the
session or fail.
Instead of duplicating some sensitive listener-specific code in the
session and in the stream code, let's call listener_release() when
releasing a connection attached to a listener.
Each user of a session increments/decrements the jobs variable at its
own place, resulting in a real mess and inconsistencies between them.
Let's have session_new() increment jobs and session_free() decrement
it.
The session may need to enforce a timeout when waiting for a handshake.
Till now we used a trick to avoid allocating a pointer, we used to set
the connection's owner to the task and set the task's context to the
session, so that it was possible to circle between all of them. The
problem is that we'll really need to pass the pointer to the session
to the upper layers during initialization and that the only place to
store it is conn->owner, which is squatted for this trick.
So this patch moves the struct task* into the session where it should
always have been and ensures conn->owner points to the session until
the data layer is properly initialized.
Currently a task is allocated in session_new() and serves two purposes :
- either the handshake is complete and it is offered to the stream via
the second arg of stream_new()
- or the handshake is not complete and it's diverted to be used as a
timeout handler for the embryonic session and repurposed once we land
into conn_complete_session()
Furthermore, the task's process() function was taken from the listener's
handler in conn_complete_session() prior to being replaced by a call to
stream_new(). This will become a serious mess with the mux.
Since it's impossible to have a stream without a task, this patch removes
the second arg from stream_new() and make this function allocate its own
task. In session_accept_fd(), we now only allocate the task if needed for
the embryonic session and delete it later.
The ->init() callback of the connection's data layer was only used to
complete the session's initialisation since sessions and streams were
split apart in 1.6. The problem is that it creates a big confusion in
the layers' roles as the session has to register a dummy data layer
when waiting for a handshake to complete, then hand it off to the
stream which will replace it.
The real need is to notify that the transport has finished initializing.
This should enable a better splitting between these layers.
This patch thus introduces a connection-specific callback called
xprt_done_cb() which informs about handshake successes or failures. With
this, data->init() can disappear, CO_FL_INIT_DATA as well, and we don't
need to register a dummy data->wake() callback to be notified of errors.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
We now refrain from clearing a session's variables, counters, and from
releasing it as long as at least one stream references it. For now it
never happens but with H2 this will be mandatory to avoid double frees.
It doesn't make sense that stream_new() doesn't sets the target nor
analysers and that the caller has to do it even if it doesn't know
about streams (eg: in session_accept_fd()). This causes trouble for
H2 where the applet handling the protocol cannot properly change
these information during its init phase.
Let's ensure it's always set and that the callers don't set it anymore.
Note: peers and lua don't use analysers and that's properly handled.
The task_wakeup was called on stream_new, but the task/stream
wasn't fully initialized yet. The task_wakeup must be called
explicitly by the caller once the task/stream is initialized.
Now we exclusively use xprt_get(XPRT_RAW) instead of &raw_sock or
xprt_get(XPRT_SSL) for &ssl_sock. This removes a bunch of #ifdef and
include spread over a number of location including backend, cfgparse,
checks, cli, hlua, log, server and session.
