QUIC will rely on UDP at the receiver level, and will need these functions
to suspend/resume the receivers. In the future, protocol chaining may
simplify this.
In conn_ctrl_init() and conn_ctrl_close() we now use the control layer's
functions instead of manipulating the FD directly. This is safe since the
control layer is always present when done. Note that now we also adjust
the flag before calling the function to make things cleaner in case such
a layer would need to call the same functions again for any reason.
Currnetly conn_ctrl_init() does an fd_insert() and conn_ctrl_close() does an
fd_delete(). These are the two only short-term obstacles against using a
non-fd handle to set up a connection. Let's have pur these into the protocol
layer, along with the other connection-level stuff so that the generic
connection code uses them instead. This will allow to define new ones for
other protocols (e.g. QUIC).
Since we only support regular sockets at the moment, the code was placed
into sock.c and shared with proto_tcp, proto_uxst and proto_sockpair.
For the sake of an improved readability, let's group the protocol
field members according to where they're supposed to be defined:
- connection layer (note: for now even UDP needs one)
- binding layer
- address family
- socket layer
Nothing else was changed.
The various protocols were made static since there was no point in
exporting them in the past. Nowadays with QUIC relying on UDP we'll
significantly benefit from UDP being exported and more generally from
being able to declare some functions as being the same as other
protocols'.
In an ideal world it should not be these protocols which should be
exported, but the intermediary levels:
- socket layer (sock.c only right now), already exported as functions
but nothing structured at the moment ;
- family layer (sock_inet, sock_unix, sockpair etc): already structured
and exported
- binding layer (the part that relies on the receiver): currently fused
within the protocol
- connectiong layer (the part that manipulates connections): currently
fused within the protocol
- protocol (connection's control): shouldn't need to be exposed
ultimately once the elements above are in an easily sharable way.
This field used to be needed before commit 2b5e0d8b6 ("MEDIUM: proto_udp:
replace last AF_CUST_UDP* with AF_INET*") as it was used as a protocol
entry selector. Since this commit it's always equal to the socket family's
value so it's entirely redundant. Let's remove it now to simplify the
protocol definition a little bit.
The input buffer passed as argument to create a new stream must not be
transferred when the request channel is initialized because the channel
flags are not set at this stage. In addition, the API is a bit confusing
regarding the buffer owner when an error occurred. The caller remains the
owner, but reading the code it is not obvious.
So, first of all, to avoid any ambiguities, comments are added on the
calling chain to make it clear. The buffer owner is the caller if any error
occurred. And the ownership is transferred to the stream on success.
Then, to make things simple, the ownership is transferred at the end of
stream_new(), in case of success. And the input buffer is updated to point
on BUF_NULL. Thus, in all cases, if the caller try to release it calling
b_free() on it, it is not a problem. Of course, it remains the caller
responsibility to release it on error.
The patch fixes a bug introduced by the commit 26256f86e ("MINOR: stream:
Pass an optional input buffer when a stream is created"). No backport is
needed.
With the removal of the family-specific port setting, all protocol had
exactly the same implementation of ->add(). A generic one was created
with the name "default_add_listener" so that all other ones can now be
removed. The API was slightly adjusted so that the protocol and the
listener are passed instead of the listener and the port.
Note that all protocols continue to provide this ->add() method instead
of routinely calling default_add_listener() from create_listeners(). This
makes sure that any non-standard protocol will still be able to intercept
the listener addition if needed.
This could be backported to 2.3 along with the few previous patches on
listners as a pure code cleanup.
At various places we need to set a port on an IPv4 or IPv6 address, and
it requires casts that are easy to get wrong. Let's add a new set_port()
helper to the address family to assist in this. It will be directly
accessible from the protocol and will make the operation seamless.
Right now this is only implemented for sock_inet as other families do
not need a port.
This flags is now unused. It was used in REQ_WAIT_HTTP analyser, when a
stream was waiting for a request, to set the keep-alive timeout or to avoid
to send HTTP errors to client.
The ctl param MUX_EXIT_STATUS can be request to get the exit status of a
multiplexer. For instance, it may be an HTTP status code or an H2 error. For
now, 0 is always returned. When the mux h1 will be able to return HTTP
errors itself, this ctl param will be used to get the HTTP status code from
the logs.
the mux_exit_status enum has been created to map internal mux exist status
to generic one. Thus there is 5 possible status for now: success, invalid
error, timeout error, internal error and unknown.
cumulative numbers of http request and http errors of counters tracked at
the session level and their rates can now be updated at the session level
thanks to two new functions. These functions are not used for now, but it
will be called to keep tracked counters up-to-date if an error occurs before
the stream creation.
The cumulative numbers of http requests, http errors, bytes received and
sent and their respective rates for a tracked counters are now updated using
specific stream independent functions. These functions are used by the
stream but the aim is to allow the session to do so too. For now, there is
no reason to perform these updates from the session, except from the mux-h2
maybe. But, the mux-h1, on the frontend side, will be able to return some
errors to the client, before the stream creation. In this case, it will be
mandatory to update counters tracked at the session level.
It is now possible to set the buffer used by the channel request buffer when
a stream is created. It may be useful if input data are already received,
instead of waiting the first call to the mux rcv_buf() callback. This change
is mandatory to support H1 connection with no stream attached.
For now, the multiplexers don't pass any buffer. BUF_NULL is thus used to
call stream_create_from_cs().
This callback function was only defined by the mux-h1. But it has been
removed in the previous commit because it is unused now. So, we can do a
step forward removing the callback function from the mux definition and the
cs_info structure.
The idle duration between two streams is added to the session structure. It
is not necessarily pertinent on all protocols. In fact, it is only defined
for H1 connections. It is the duration between two H1 transactions. But the
.get_cs_info() callback function on the multiplexers only exists because
this duration is missing at the session level. So it is a simplification
opportunity for a really low cost.
To reduce the cost, a hole in the session structure is filled by moving
.srv_list field at the end of the structure.
The goal is to allow execution of one main lua state per thread.
The array introduces storage of one reference per thread, because each
lua state can have different reference id for a same function. A function
returns the preferred state id according to configuration and current
thread id.
The goal is to allow execution of one main lua state per thread.
"state_from" is a pointer to the parent lua state. "state_id"
is the index of the parent state id in the reference lua states
array. "state_id" is better because the lock is a "== 0" test
which is quick than pointer comparison. In other way, the state_id
index could index other things the the Lua state concerned. I
think to the function references.
The goal is to allow execution of one main lua state per thread.
This function will initialize the struct with other things than 0.
With this function helper, the initialization is centralized and
it prevents mistakes. This patch also keeps a reference to each
declared function in a list. It will be useful in next patches to
control consistency of declared references.
The goal is to allow execution of one main lua state per thread.
The function hlua_ctx_init() now gets the original lua state from
its caller. This allows the initialisation of lua_thread (coroutines)
from any master lua state.
The parent lua state is stored in the hlua struct.
This patch is a temporary transition, it will be modified later.
The goal is to allow execution of one main lua state per thread.
Because this struct will be filled after the configuration parser, we
cannot copy the content. The actual state of the Haproxy code doesn't
justify this change, it is an update preparing next steps.
This function will be useful to check if the keyword is already registered.
Also add a define for the max number of args.
This will be needed by a next patch to fix a bug and will have to be
backported.
This function simply calls action_lookup() on the private service_keywords,
to look up a service name. This will be used to detect double registration
of a same service from Lua.
This will be needed by a next patch to fix a bug and will have to be
backported.
These functions will be useful to check if a keyword is already registered.
This will be needed by a next patch to fix a bug, and will need to be
backported.
Sometimes it would be nice to be able to only trace abnormal events such
as protocol errors. Let's add a new "error" level below the "user" level
for this. This will allow to add TRACE_ERROR() at various error points
and only see them.
This patch adds a new logging variable '%HPO' for logging HTTP path only
(without query string) from relative or absolute URI.
For example:
log-format "hpo=%HPO hp=%HP hu=%HU hq=%HQ"
GET /r/1 HTTP/1.1
=>
hpo=/r/1 hp=/r/1 hu=/r/1 hq=
GET /r/2?q=2 HTTP/1.1
=>
hpo=/r/2 hp=/r/2 hu=/r/2?q=2 hq=?q=2
GET http://host/r/3 HTTP/1.1
=>
hpo=/r/3 hp=http://host/r/3 hu=http://host/r/3 hq=
GET http://host/r/4?q=4 HTTP/1.1
=>
hpo=/r/4 hp=http://host/r/4 hu=http://host/r/4?q=4 hq=?q=4
Since 2.3 default local log format always adds hostame field.
This behavior change was due to log/sink re-work, because according
to rfc3164 the hostname field is mandatory.
This patch re-introduce a legacy "local" format which is analog
to rfc3164 but with hostname stripped. This is the new
default if logs are generated by haproxy.
To stay compliant with previous configurations, the option
"log-send-hostname" acts as if the default format is switched
to rfc3164.
This patch addresses the github issue #963
This patch should be backported in branches >= 2.3.
In issue #958 Ashley Penney reported intermittent crashes on AWS's ARM
nodes which would not happen on x86 nodes. After investigation it turned
out that the Neoverse N1 CPU cores used in the Graviton2 CPU are much
more aggressive than the usual Cortex A53/A72/A55 or any x86 regarding
memory ordering.
The issue that was triggered there is that if a tasklet_wakeup() call
is made on a tasklet scheduled to run on a foreign thread and that
tasklet is just being dequeued to be processed, there can be a race at
two places:
- if MT_LIST_TRY_ADDQ() happens between MT_LIST_BEHEAD() and
LIST_SPLICE_END_DETACHED() if the tasklet is alone in the list,
because the emptiness tests matches ;
- if MT_LIST_TRY_ADDQ() happens during LIST_DEL_INIT() in
run_tasks_from_lists(), then depending on how LIST_DEL_INIT() ends
up being implemented, it may even corrupt the adjacent nodes while
they're being reused for the in-tree storage.
This issue was introduced in 2.2 when support for waking up remote
tasklets was added. Initially the attachment of a tasklet to a list
was enough to know its status and this used to be stable information.
Now it's not sufficient to rely on this anymore, thus we need to use
a different information.
This patch solves this by adding a new task flag, TASK_IN_LIST, which
is atomically set before attaching a tasklet to a list, and is only
removed after the tasklet is detached from a list. It is checked
by tasklet_wakeup_on() so that it may only be done while the tasklet
is out of any list, and is cleared during the state switch when calling
the tasklet. Note that the flag is not set for pure tasks as it's not
needed.
However this introduces a new special case: the function
tasklet_remove_from_tasklet_list() needs to keep both states in sync
and cannot check both the state and the attachment to a list at the
same time. This function is already limited to being used by the thread
owning the tasklet, so in this case the test remains reliable. However,
just like its predecessors, this function is wrong by design and it
should probably be replaced with a stricter one, a lazy one, or be
totally removed (it's only used in checks to avoid calling a possibly
scheduled event, and when freeing a tasklet). Regardless, for now the
function exists so the flag is removed only if the deletion could be
done, which covers all cases we're interested in regarding the insertion.
This removal is safe against a concurrent tasklet_wakeup_on() since
MT_LIST_DEL() guarantees the atomic test, and will ultimately clear
the flag only if the task could be deleted, so the flag will always
reflect the last state.
This should be carefully be backported as far as 2.2 after some
observation period. This patch depends on previous patch
"MINOR: task: remove __tasklet_remove_from_tasklet_list()".
This function is only used at a single place directly within the
scheduler in run_tasks_from_lists() and it really ought not be called
by anything else, regardless of what its comment says. Let's delete
it, move the two lines directly into the call place, and take this
opportunity to factor the atomic decrement on tasks_run_queue. A comment
was added on the remaining one tasklet_remove_from_tasklet_list() to
mention the risks in using it.
This function is only called at a single place and adds more confusion
than it removes. It also makes one think it could be used outside of
the scheduler while it must absolutely not. Let's just move its two
lines to the call place, making the code more readable there. In
addition this clearly shows that the preliminary LIST_INIT() is
useless since the entry is immediately overwritten.
In MT_LIST_TRY_ADDQ() and MT_LIST_TRY_ADD() we can't just check if the
element is already in a list, because there's a small race condition, it
could be added between the time we checked, and the time we actually set
its next and prev, so we have to lock it first.
This is required to address issue #958.
This should be backported to 2.3, 2.2 and 2.1.
As suggested by @AGSaidi in issue #958, on ARMv8 its convenient to use
an "isb" instruction in pl_cpu_relax() to improve fairness. Without it
I've met a few watchdog conditions on valid locks with 16 threads,
indicating that some threads couldn't manage to get it in 2 seconds. I
never happened again with it. In addition, the performance increased
by slightly more than 5% thanks to the reduced contention.
This should be backported as far as 2.2, possibly even 2.0.
The parsing of the check options based on tcp-check rules (redis, spop,
smtp, http...) are moved aways from check.c. Now, these functions are placed
in tcpcheck.c. These functions are only related to the tcpcheck ruleset
configured on a proxy and not to the health-check attached to a server.
This option is now ignored because I/O check buffers are now allocated using the
buffer pool. Thus, it is marked as deprecated in the documentation and ignored
during the configuration parsing. The field is also removed from the global
structure.
Because this option is ignored since a recent fix, backported as fare as 2.2,
this patch should be backported too. Especially because it updates the
documentation.
Historically, the input and output buffers of a check are allocated by hand
during the startup, with a specific size (not necessarily the same than
other buffers). But since the recent refactoring of the checks to rely
exclusively on the tcp-checks and to use the underlying mux layer, this part
is totally buggy. Indeed, because these buffers are now passed to a mux,
they maybe be swapped if a zero-copy is possible. In fact, for now it is
only possible in h2_rcv_buf(). Thus the bug concretely only exists if a h2
health-check is performed. But, it is a latent bug for other muxes.
Another problem is the size of these buffers. because it may differ for the
other buffer size, it might be source of bugs.
Finally, for configurations with hundreds of thousands of servers, having 2
buffers per check always allocated may be an issue.
To fix the bug, we now allocate these buffers when required using the buffer
pool. Thus not-running checks don't waste memory and muxes may swap them if
possible. The only drawback is the check buffers have now always the same
size than buffers used by the streams. This deprecates indirectly the
"tune.chksize" global option.
In addition, the http-check regtest have been update to perform some h2
health-checks.
Many thanks to @VigneshSP94 for its help on this bug.
This patch should solve the issue #936. It relies on the commit "MINOR:
tcpcheck: Don't handle anymore in-progress send rules in tcpcheck_main".
Both must be backport as far as 2.2.
bla
The Vary functionality is based on a secondary key that needs to be
calculated for every request to which a server answers with a Vary
header. The Vary header, which can only be found in server responses,
determines which headers of the request need to be taken into account in
the secondary key. Since we do not want to have to store all the headers
of the request until we have the response, we will pre-calculate as many
sub-hashes as there are headers that we want to manage in a Vary
context. We will only focus on a subset of headers which are likely to
be mentioned in a Vary response (accept-encoding and referer for now).
Every managed header will have its own normalization function which is
in charge of transforming the header value into a core representation,
more robust to insignificant changes that could exist between multiple
clients. For instance, two accept-encoding values mentioning the same
encodings but in different orders should give the same hash.
This patch adds a function that parses a Vary header value and checks if
all the values belong to our supported subset. It also adds the
normalization functions for our two headers, as well as utility
functions that can prebuild a secondary key for a given request and
transform it into an actual secondary key after the vary signature is
determined from the response.
When at least one data filter is registered on a channel, the offsets of all
filters must be kept up to date. For data filters but also for others. It is
safer to do it in that way. Indirectly, this patch fixes 2 hidden bugs
revealed by the commit 22fca1f2c ("BUG/MEDIUM: filters: Forward all filtered
data at the end of http filtering").
The first one, the worst of both, happens at the end of http filtering when
at least one data filtered is registered on the channel. We call the
http_end() callback function on the filters, when defined, to finish the
http filtering. But it is performed for all filters. Before the commit
22fca1f2c, the only risk was to call the http_end() callback function
unexpectedly on a filter. Now, we may have an overflow on the offset
variable, used at the end to forward all filtered data. Of course, from the
moment we forward an arbitrary huge amount of data, all kinds of bad things
may happen. So offset computation is performed for all filters and
http_end() callback function is called only for data filters.
The other one happens when a data filter alter the data of a channel, it
must update the offsets of all previous filters. But the offset of non-data
filters must be up to date, otherwise, here too we may have an integer
overflow.
Another way to fix these bugs is to always ignore non-data filters from the
offsets computation. But this patch is safer and probably easier to
maintain.
This patch must be backported in all versions where the above commit is. So
as far as 2.0.
Level-7 retries are only possible with a restricted number of HTTP
return codes. While it is usually not safe to retry on 401 and 403, I
came up with an authentication backend which was not synchronizing
authentication of users. While not perfect, being allowed to also retry
on those return codes is really helpful and acts as a hotfix until we
can fix the backend.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This patch adds -m flag which allows to specify header name
matching method when deleting headers from http request/response.
Currently beg, end, sub, str and reg are supported.
This is related to GitHub issue #909
Baptiste reported a new crash affecting 2.3 which can be triggered
when using H2 on the backend, with http-reuse always and with a tens
of clients doing close only. There are a few combined cases which cause
this to happen, but each time the issue is the same, an already freed
session is dereferenced in session_unown_conn().
Two cases were identified to cause this:
- a connection referencing a session as its owner, which is detached
from the session's list and is destroyed after this session ends.
The test on conn->owner before calling session_unown_conn() is not
sufficent as the pointer is not null but is not valid anymore.
- a connection that never goes idle and that gets killed form the
mux, where session_free() is called first, then conn_free() calls
session_unown_conn() which scans the just freed session for older
connections. This one is only triggered with DEBUG_UAF
The reason for this session to be present here is that it's needed during
the connection setup, to be passed to conn_install_mux_be() to mux->init()
as the owning session, but it's never deleted aftrewards. Furthermore, even
conn_session_free() doesn't delete this pointer after freeing the session
that lies there. Both do definitely result in a use-after-free that's more
easily triggered under DEBUG_UAF.
This patch makes sure that the owner is always deleted after detaching
or killing the session. However it is currently not possible to clear
the owner right after a synchronous init because the proxy protocol
apparently needs it (a reg test checks this), and if we leave it past
the connection setup with the session not attached anywhere, it's hard
to catch the right moment to detach it. This means that the session may
remain in conn->owner as long as the connection has never been added to
nor removed from the session's idle list. Given that this patch needs to
remain simple enough to be backported, instead it adds a workaround in
session_unown_conn() to detect that the element is already not attached
anywhere.
This fix absolutely requires previous patch "CLEANUP: connection: do not
use conn->owner when the session is known" otherwise the situation will
be even worse, as some places used to rely on conn->owner instead of the
session.
The fix could theorically be backported as far as 1.8. However, the code
in this area has significantly changed along versions and there are more
risks of breaking working stuff than fixing real issues there. The issue
was really woken up in two steps during 2.3-dev when slightly reworking
the idle conns with commit 08016ab82 ("MEDIUM: connection: Add private
connections synchronously in session server list") and when adding
support for storing used H2 connections in the session and adding the
necessary call to session_unown_conn() in the muxes. But the same test
managed to crash 2.2 when built in DEBUG_UAF and patched like this,
proving that we used to already leave dangling pointers behind us:
| diff --git a/include/haproxy/connection.h b/include/haproxy/connection.h
| index f8f235c1a..dd30b5f80 100644
| --- a/include/haproxy/connection.h
| +++ b/include/haproxy/connection.h
| @@ -458,6 +458,10 @@ static inline void conn_free(struct connection *conn)
| sess->idle_conns--;
| session_unown_conn(sess, conn);
| }
| + else {
| + struct session *sess = conn->owner;
| + BUG_ON(sess && sess->origin != &conn->obj_type);
| + }
|
| sockaddr_free(&conn->src);
| sockaddr_free(&conn->dst);
It's uncertain whether an existing code path there can lead to dereferencing
conn->owner when it's bad, though certain suspicious memory corruption bugs
make one think it's a likely candidate. The patch should not be hard to
adapt there.
Backports to 2.1 and older are left to the appreciation of the person
doing the backport.
A reproducer consists in this:
global
nbthread 1
listen l
bind :9000
mode http
http-reuse always
server s 127.0.0.1:8999 proto h2
frontend f
bind :8999 proto h2
mode http
http-request return status 200
Then this will make it crash within 2-3 seconds:
$ h1load -e -r 1 -c 10 http://0:9000/
If it does not, it might be that DEBUG_UAF was not used (it's harder then)
and it might be useful to restart.
At a few places we used to rely on conn->owner to retrieve the session
while the session is already known. This is not correct because at some
of these points the reason the connection's owner was still the session
(instead of NULL) is a mistake. At one place a comparison is even made
between the session and conn->owner assuming it's valid without checking
if it's NULL. Let's clean this up to use the session all the time.
Note that this will be needed for a forthcoming fix and will have to be
backported.
HAVE_SSL_CTX_SET_CIPHERSUITES is newly defined macro set in openssl-compat.h,
which helps to identify ssl libs (currently OpenSSL-1.1.1 only) that supports
TLS13 cipersuites manipulation on TLS13 context
in the context of a progressive backend migration, we want to be able to
activate SSL on outgoing connections to the server at runtime without
reloading.
This patch adds a `set server ssl` command; in order to allow that:
- add `srv_use_ssl` to `show servers state` command for compatibility,
also update associated parsing
- when using default-server ssl setting, and `no-ssl` on server line,
init SSL ctx without activating it
- when triggering ssl API, de/activate SSL connections as requested
- clean ongoing connections as it is done for addr/port changes, without
checking prior server state
example config:
backend be_foo
default-server ssl
server srv0 127.0.0.1:6011 weight 1 no-ssl
show servers state:
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - -1
where srv0 can switch to ssl later during the runtime:
set server be_foo/srv0 ssl on
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - 1
Also update existing tests and create a new one.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Functions registered to release memory per-thread have no return value. But the
registering function and the function pointer in per_thread_free_fct structure
specify it should return an integer. This patch fixes it.
This patch may be backported as far as 2.0.
Define a per-thread counters allocated with the greatest size of any
stat module counters. This variable is named trash_counters.
When using a proxy without allocated counters, return the trash counters
from EXTRA_COUNTERS_GET instead of a dangling pointer to prevent
segfault.
This is useful for all the proxies used internally and not
belonging to the global proxy list. As these objects does not appears on
the stat report, it does not matter to use the dummy counters.
For this fix to be functional, the extra counters are explicitly
initialized to NULL on proxy/server/listener init functions.
Most notably, the crash has already been detected with the following
vtc:
- reg-tests/lua/txn_get_priv.vtc
- reg-tests/peers/tls_basic_sync.vtc
- reg-tests/peers/tls_basic_sync_wo_stkt_backend.vtc
There is probably other parts that may be impacted (SPOE for example).
This bug was introduced in the current release and do not need to be
backported. The faulty commits are
"MINOR: ssl: count client hello for stats" and
"MINOR: ssl: add counters for ssl sessions".
