The 'dst' optionnal field on a httpclient request can be used to set an
alternative server address in the haproxy address format. Which means it
could be use with unix@, ipv6@ etc.
Should fix issue #1471.
This patch allows to replace the host header generated by the
httpclient instead of adding a new one, resulting in the server replying
an error 400.
The host header is now generated from the uri only if it wasn't found in
the list of headers.
Also add a new request in the VTC file to test this.
This patch must be backported in 2.5.
With the CI occasionally slowing down, we're starting to see again some
spurious failures despite the long 1-second timeouts. This reports false
positives that are disturbing and doesn't provide as much value as this
could. However at this delay it already becomes a pain for developers
to wait for the tests to complete.
This commit adds support for the new environment variable
HAPROXY_TEST_TIMEOUT that will allow anyone to modify the connect,
client and server timeouts. It was set to 5 seconds by default, which
should be plenty for quite some time in the CI. All relevant values
that were 200ms or above were replaced by this one. A few larger
values were left as they are special. One test for the set-timeout
action that used to rely on a fixed 1-sec value was extended to a
fixed 5-sec, as the timeout is normally not reached, but it needs
to be known to compare the old and new values.
Improve the httpclient reg-tests to test the streaming,
The regtest now sends a big payload to vtest, then receive a payload
from vtest and send it again.
Add support for HEAD/PUT/POST/DELETE method with the lua httpclient.
This patch use the httpclient_req_gen() function with a different meth
parameter to implement this.
Also change the reg-test to support a POST request with a body.
httpclient_req_gen() takes a payload argument which can be use to put a
payload in the request. This payload can only fit a request buffer.
This payload can also be specified by the "body" named parameter within
the lua. httpclient.
It is also used within the CLI httpclient when specified as a CLI
payload with "<<".
Migrate the httpclient:get() method to named arguments so we can
specify optional arguments.
This allows to pass headers as an optional argument as an array.
The () in the method call must be replaced by {}:
local res = httpclient:get{url="http://127.0.0.1:9000/?s=99",
headers= {["X-foo"] = { "salt" }, ["X-bar"] = {"pepper" }}}
This reg-test is heavily inspired by the lua_socket.vtc one.
It replaces the HTTP/1.1 request made manually with a socket object with
an httpclient object.
The global table of known variables names can only grow and was designed
for static names that are registered at boot. Nowadays it's possible to
set dynamic variable names from Lua or from the CLI, which causes a real
problem that was partially addressed in 2.2 with commit 4e172c93f
("MEDIUM: lua: Add `ifexist` parameter to `set_var`"). Please see github
issue #624 for more context.
This patch simplifies all this by removing the need for a central
registry of known names, and storing 64-bit hashes instead. This is
highly sufficient given the low number of variables in each context.
The hash is calculated using XXH64() which is bijective over the 64-bit
space thus is guaranteed collision-free for 1..8 chars. Above that the
risk remains around 1/2^64 per extra 8 chars so in practice this is
highly sufficient for our usage. A random seed is used at boot to seed
the hash so that it's not attackable from Lua for example.
There's one particular nit though. The "ifexist" hack mentioned above
is now limited to variables of scope "proc" only, and will only match
variables that were already created or declared, but will now verify
the scope as well. This may affect some bogus Lua scripts and SPOE
agents which used to accidentally work because a similarly named
variable used to exist in a different scope. These ones may need to be
fixed to comply with the doc.
Now we can sum up the situation as this one:
- ephemeral variables (scopes sess, txn, req, res) will always be
usable, regardless of any prior declaration. This effectively
addresses the most problematic change from the commit above that
in order to work well could have required some script auditing ;
- process-wide variables (scope proc) that are mentioned in the
configuration, referenced in a "register-var-names" SPOE directive,
or created via "set-var" in the global section or the CLI, are
permanent and will always accept to be set, with or without the
"ifexist" restriction (SPOE uses this internally as well).
- process-wide variables (scope proc) that are only created via a
set-var() tcp/http action, via Lua's set_var() calls, or via an
SPOE with the "force-set-var" directive), will not be permanent
but will always accept to be replaced once they are created, even
if "ifexist" is present
- process-wide variables (scope proc) that do not exist will only
support being created via the set-var() tcp/http action, Lua's
set_var() calls without "ifexist", or an SPOE declared with
"force-set-var".
This means that non-proc variables do not care about "ifexist" nor
prior declaration, and that using "ifexist" should most often be
reliable in Lua and that SPOE should most often work without any
prior declaration. It may be doable to turn "ifexist" to 1 by default
in Lua to further ease the transition. Note: regtests were adjusted.
Cc: Tim Düsterhus <tim@bastelstu.be>
Some regtests involve multiple requests from multiple clients, which can
be dispatched as multiple requests to a server. It turns out that the
idle connection sharing works so well that very quickly few connections
are used, and regularly some of the remaining idle server connections
time out at the moment they were going to be reused, causing those random
"HTTP header incomplete" traces in the logs that make them fail often. In
the end this is only an artefact of the test environment.
And indeed, some tests like normalize-uri which perform a lot of reuse
fail very often, about 20-30% of the times in the CI, and 100% of the
time in local when running 1000 tests in a row. Others like ubase64,
sample_fetches or vary_* fail less often but still a lot in tests.
This patch addresses this by adding "tune.idle-pool.shared off" to all
tests which have at least twice as many requests as clients. It proves
very effective as no single error happens on normalize-uri anymore after
10000 tests. Also 100 full runs of all tests yield no error anymore.
One test is tricky, http_abortonclose, it used to fail ~10 times per
1000 runs and with this workaround still fails once every 1000 runs.
But the test is complex and there's a warning in it mentioning a
possible issue when run in parallel due to a port reuse.
This is simply txn_get_priv.vtc with the loading made using
lua-load-per-thread, allowing all threads to run independently.
There's nothing global nor thread-specific in this test, which makes
an excellent example of something that should work out of the box.
Four concurrent clients are initialized with 4 loops each so as to
give a little chance to various threads to run concurrently.
Its sole remaining purpose was to display "proxy foo started", which
has little benefit and pollutes output for those with plenty of proxies.
Let's remove it now.
The VTCs were updated to reflect this, because many of them had explicit
counts of dropped lines to match this message.
This is tagged as MEDIUM because some users may be surprized by the
loss of this quite old message.
As discussed in GitHub issue #624 Lua scripts should not use
variables that are never going to be read, because the memory
for variable names is never going to be freed.
Add an optional `ifexist` parameter to the `set_var` function
that allows a Lua developer to set variables that are going to
be ignored if the variable name was not used elsewhere before.
Usually this mean that there is no `var()` sample fetch for the
variable in question within the configuration.
Some reg tests and their dependencies have been renamed. They may be
referenced by the .vtc files. So, this patch modifies also the references
to these dependencies.
This patch replaces LEVEL variable by REGTESTS_TYPES variable which is more
mnemonic and human readable. It is uses as a filter to run the reg tests scripts
where a commented #REGTEST_TYPE may be defined to designate their types.
Running the following command:
$ REGTESTS_TYPES=slow,default
will start all the reg tests where REGTEST_TYPE is defines as 'slow' or 'default'.
Note that 'default' is also the default value of REGTEST_TYPE when not specified
dedicated to run all the current h*.vtc files. When REGTESTS_TYPES is not specified
there is no filter at all. All the tests are run.
This patches also defines REGTEST_TYPE with 'slow' value for all the s*.vtc files,
'bug' value for al the b*.vtc files, 'broken' value for all the k*.vtc files.
Lua test files 2 and 3 fail when threads are disabled because of a
"nbthread" statement that seems to be a leftover from an ancient
configuration. One of them even mentions a commit message showing
a reproducer not involving threads. Let's clean this up so that
running the tests without threads also works.
This should be backported to 1.9 as the problem also exists there.
Fix typos in comments and error messages of reg-tests. Note that this
has not been qualified as minor as it is used for testing purposes, not
end-users.
When calling ->prepare_srv() callback for SSL server which
depends on global "nbthread" value, this latter was not already parsed,
so equal to 1 default value. This lead to bad memory accesses.
Thank you to Pieter (PiBa-NL) for having reported this issue and
for having provided a very helpful reg testing file to reproduce
this issue (reg-test/lua/b00002.*).
Must be backported to 1.8.
Previously LUA code would maintain the transaction state between http
requests, resulting in things like txn:get_priv() retrieving data from
a previous request. This addresses the issue by ensuring the LUA state
is reset between requests.
Co-authored-by: Tim Düsterhus <tim@bastelstu.be>
Add LEVEL #4 regression testing files which is dedicated to
VTC files in relation with bugs they help to reproduce.
At the date of this commit, all VTC files are LEVEL 4 VTC files.
Add a makefile target 'reg-tests' to run all regression testing file
found in 'reg-tests' directory.
Add reg-tests/lua/h00000.vtc first regression testing file for a LUA
fixed by f874a83 commit.
