This fetch extracts the request's query string, which starts after the first
question mark. If no question mark is present, this fetch returns nothing. If
a question mark is present but nothing follows, it returns an empty string.
This means it's possible to easily know whether a query string is present
using the "found" matching method. This fetch is the completemnt of "path"
which stops before the question mark.
If a memory size limit is enforced using "-n" on the command line and
one or both of maxconn / maxsslconn are not set, instead of using the
build-time values, haproxy now computes the number of sessions that can
be allocated depending on a number of parameters among which :
- global.maxconn (if set)
- global.maxsslconn (if set)
- maxzlibmem
- tune.ssl.cachesize
- presence of SSL in at least one frontend (bind lines)
- presence of SSL in at least one backend (server lines)
- tune.bufsize
- tune.cookie_len
The purpose is to ensure that not haproxy will not run out of memory
when maxing out all parameters. If neither maxconn nor maxsslconn are
used, it will consider that 100% of the sessions involve SSL on sides
where it's supported. That means that it will typically optimize maxconn
for SSL offloading or SSL bridging on all connections. This generally
means that the simple act of enabling SSL in a frontend or in a backend
will significantly reduce the global maxconn but in exchange of that, it
will guarantee that it will not fail.
All metrics may be enforced using #defines to accomodate variations in
SSL libraries or various allocation sizes.
This is equivalent to what was done in commit 48936af ("[MINOR] log:
ability to override the syslog tag") but this time instead of doing
this globally, it does it per proxy. The purpose is to be able to use
a separate log tag for various proxies (eg: make it easier to route
log messages depending on the customer).
Add some documentation about the environment variables available with
"external-check command". Currently, only one of them is dynamically updated
on each check : HAPROXY_SERVER_CURCONN.
This setting is used to limit memory usage without causing the alloc
failures caused by "-m". Unexpectedly, tests have shown a performance
boost of up to about 18% on HTTP traffic when limiting the number of
buffers to about 10% of the amount of concurrent connections.
tune.buffers.limit <number>
Sets a hard limit on the number of buffers which may be allocated per process.
The default value is zero which means unlimited. The minimum non-zero value
will always be greater than "tune.buffers.reserve" and should ideally always
be about twice as large. Forcing this value can be particularly useful to
limit the amount of memory a process may take, while retaining a sane
behaviour. When this limit is reached, sessions which need a buffer wait for
another one to be released by another session. Since buffers are dynamically
allocated and released, the waiting time is very short and not perceptible
provided that limits remain reasonable. In fact sometimes reducing the limit
may even increase performance by increasing the CPU cache's efficiency. Tests
have shown good results on average HTTP traffic with a limit to 1/10 of the
expected global maxconn setting, which also significantly reduces memory
usage. The memory savings come from the fact that a number of connections
will not allocate 2*tune.bufsize. It is best not to touch this value unless
advised to do so by an haproxy core developer.
Used in conjunction with the dynamic buffer allocator.
tune.buffers.reserve <number>
Sets the number of buffers which are pre-allocated and reserved for use only
during memory shortage conditions resulting in failed memory allocations. The
minimum value is 2 and is also the default. There is no reason a user would
want to change this value, it's mostly aimed at haproxy core developers.
Previously, external checks required to find at least one listener in order to
pass the <proxy_address> and <proxy_port> arguments to the external script.
It prevented from declaring external checks in backend sections and haproxy
rejected the configuration.
The listener is now optional and values "NOT_USED" are passed if no listener is
found. For instance, this is the case with a backend section.
This is specific to the 1.6 branch.
word(<index>,<delimiters>)
Extracts the nth word considering given delimiters from an input string.
Indexes start at 1 and delimiters are a string formatted list of chars.
field(<index>,<delimiters>)
Extracts the substring at the given index considering given delimiters from
an input string. Indexes start at 1 and delimiters are a string formatted
list of chars.
bytes(<offset>[,<length>])
Extracts a some bytes from an input binary sample. The result is a
binary sample starting at an offset (in bytes) of the original sample
and optionnaly truncated at the given length.
Sometimes, either for debugging or for logging we'd like to have a bit
of information about the running process. Here are 3 new fetches for this :
nbproc : integer
Returns an integer value corresponding to the number of processes that were
started (it equals the global "nbproc" setting). This is useful for logging
and debugging purposes.
proc : integer
Returns an integer value corresponding to the position of the process calling
the function, between 1 and global.nbproc. This is useful for logging and
debugging purposes.
stopping : boolean
Returns TRUE if the process calling the function is currently stopping. This
can be useful for logging, or for relaxing certain checks or helping close
certain connections upon graceful shutdown.
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Adds global statements 'ssl-default-server-options' and
'ssl-default-bind-options' to force on 'server' and 'bind' lines
some ssl options.
Currently available options are 'no-sslv3', 'no-tlsv10', 'no-tlsv11',
'no-tlsv12', 'force-sslv3', 'force-tlsv10', 'force-tlsv11',
'force-tlsv12', and 'no-tls-tickets'.
Example:
global
ssl-default-server-options no-sslv3
ssl-default-bind-options no-sslv3
ssl_c_der : binary
Returns the DER formatted certificate presented by the client when the
incoming connection was made over an SSL/TLS transport layer. When used for
an ACL, the value(s) to match against can be passed in hexadecimal form.
ssl_f_der : binary
Returns the DER formatted certificate presented by the frontend when the
incoming connection was made over an SSL/TLS transport layer. When used for
an ACL, the value(s) to match against can be passed in hexadecimal form.
This converter escapes string to use it as json/ascii escaped string.
It can read UTF-8 with differents behavior on errors and encode it in
json/ascii.
json([<input-code>])
Escapes the input string and produces an ASCII ouput string ready to use as a
JSON string. The converter tries to decode the input string according to the
<input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8"" or
"utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
of errors:
- bad UTF-8 sequence (lone continuation byte, bad number of continuation
bytes, ...)
- invalid range (the decoded value is within a UTF-8 prohibited range),
- code overlong (the value is encoded with more bytes than necessary).
The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
character is greater than 0xffff because the JSON string escape specification
only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
in 4 variants designated by a combination of two suffix letters : "p" for
"permissive" and "s" for "silently ignore". The behaviors of the decoders
are :
- "ascii" : never fails ;
- "utf8" : fails on any detected errors ;
- "utf8s" : never fails, but removes characters corresponding to errors ;
- "utf8p" : accepts and fixes the overlong errors, but fails on any other
error ;
- "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
characters corresponding to the other errors.
This converter is particularly useful for building properly escaped JSON for
logging to servers which consume JSON-formated traffic logs.
Example:
capture request header user-agent len 150
capture request header Host len 15
log-format {"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json]"}
Input request from client 127.0.0.1:
GET / HTTP/1.0
User-Agent: Very "Ugly" UA 1/2
Output log:
{"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}
Since commit 1b71eb5 ("BUG/MEDIUM: counters: fix track-sc* to wait on
unstable contents"), we don't need the "if HTTP" anymore. But the doc
was not updated to reflect this.
Since this change was backported to 1.5, this doc update should be
backported as well.
When a frontend does not have any bind-process directive, make it
automatically bind to the union of all of its listeners' processes
instead of binding to all processes. That will make it possible to
have the expected behaviour without having to explicitly specify a
bind-process directive.
Note that if the listeners are not bound to a specific process, the
default is still to bind to all processes.
This change could be backported to 1.5 as it simplifies process
management, and was planned to be done during the 1.5 development phase.
Sometimes it would be convenient to have a log counter so that from a log
server we know whether some logs were lost or not. The frontend's log counter
serves exactly this purpose. It's incremented each time a traffic log is
produced. If a log is disabled using "http-request set-log-level silent",
the counter will not be incremented. However, admin logs are not accounted
for. Also, if logs are filtered out before being sent to the server because
of a minimum level set on the log line, the counter will be increased anyway.
The counter is 32-bit, so it will wrap, but that's not an issue considering
that 4 billion logs are rarely in the same file, let alone close to each
other.
Add support for http-request track-sc, similar to what is done in
tcp-request for backends. A new act_prm field was added to HTTP
request rules to store the track params (table, counter). Just
like for TCP rules, the table is resolved while checking for
config validity. The code was mostly copied from the TCP code
with the exception that here we also count the HTTP request count
and rate by hand. Probably that something could be factored out in
the future.
It seems like tracking flags should be improved to mark each hook
which tracks a key so that we can have some check points where to
increase counters of the past if not done yet, a bit like is done
for TRACK_BACKEND.
From time to time it's useful to hash input data (scramble input, or
reduce the space needed in a stick table). This patch provides 3 simple
converters allowing use of the available hash functions to hash input
data. The output is an unsigned integer which can be passed into a header,
a log or used as an index for a stick table. One nice usage is to scramble
source IP addresses before logging when there are requirements to hide them.
Konstantin Romanenko reported a typo in the HTML documentation. The typo is
already present in the raw text version : the "shutdown sessions" command
should be "shutdown sessions server".
This one is not inherited from defaults into frontends nor backends
because it would create a confusion situation where it would be hard
to disable it (since both frontend and backend would enable it).
Daniel Dubovik reported an interesting bug showing that the request body
processing was still not 100% fixed. If a POST request contained short
enough data to be forwarded at once before trying to establish the
connection to the server, we had no way to correctly rewind the body.
The first visible case is that balancing on a header does not always work
on such POST requests since the header cannot be found. But there are even
nastier implications which are that http-send-name-header would apply to
the wrong location and possibly even affect part of the request's body
due to an incorrect rewinding.
There are two options to fix the problem :
- first one is to force the HTTP_MSG_F_WAIT_CONN flag on all hash-based
balancing algorithms and http-send-name-header, but there's always a
risk that any new algorithm forgets to set it ;
- the second option is to account for the amount of skipped data before
the connection establishes so that we always know the position of the
request's body relative to the buffer's origin.
The second option is much more reliable and fits very well in the spirit
of the past changes to fix forwarding. Indeed, at the moment we have
msg->sov which points to the start of the body before headers are forwarded
and which equals zero afterwards (so it still points to the start of the
body before forwarding data). A minor change consists in always making it
point to the start of the body even after data have been forwarded. It means
that it can get a negative value (so we need to change its type to signed)..
In order to avoid wrapping, we only do this as long as the other side of
the buffer is not connected yet.
Doing this definitely fixes the issues above for the requests. Since the
response cannot be rewound we don't need to perform any change there.
This bug was introduced/remained unfixed in 1.5-dev23 so the fix must be
backported to 1.5.
This patch adds two converters :
ltime(<format>[,<offset>])
utime(<format>[,<offset>])
Both use strftime() to emit the output string from an input date. ltime()
provides local time, while utime() provides the UTC time.
These new converters make it possible to look up any sample expression
in a table, and check whether an equivalent key exists or not, and if it
exists, to retrieve the associated data (eg: gpc0, request rate, etc...).
Till now it was only possible using tracking, but sometimes tracking is
not suited to only retrieving such counters, either because it's done too
early or because too many items need to be checked without necessarily
being tracked.
These converters all take a string on input, and then convert it again to
the table's type. This means that if an input sample is of type IPv4 and
the table is of type IP, it will first be converted to a string, then back
to an IP address. This is a limitation of the current design which does not
allow converters to declare that "any" type is supported on input. Since
strings are the only types which can be cast to any other one, this method
always works.
The following converters were added :
in_table, table_bytes_in_rate, table_bytes_out_rate, table_conn_cnt,
table_conn_cur, table_conn_rate, table_gpc0, table_gpc0_rate,
table_http_err_cnt, table_http_err_rate, table_http_req_cnt,
table_http_req_rate, table_kbytes_in, table_kbytes_out,
table_server_id, table_sess_cnt, table_sess_rate, table_trackers.
Listening to an abstract namespace socket is quite convenient but
comes with some drawbacks that must be clearly understood when the
socket is being listened to by multiple processes. The trouble is
that the socket cannot be rebound if a new process attempts a soft
restart and fails, so only one of the initially bound processes
will still be bound to it, the other ones will fail to rebind. For
most situations it's not an issue but it needs to be indicated.
With all the goodies supported by logformat, people find that the limit
of 1024 chars for log lines is too short. Some servers do not support
larger lines and can simply drop them, so changing the default value is
not always the best choice.
This patch takes a different approach. Log line length is specified per
log server on the "log" line, with a value between 80 and 65535. That
way it's possibly to satisfy all needs, even with some fat local servers
and small remote ones.
This new branch is based on 1.5.0, which 1.6-dev0 is 100% equivalent to.
The README has been updated to mention that it is a development branch.
Released version 1.6-dev0 with the following main changes :
- exact copy of 1.5.0
Released version 1.5.0 with the following main changes :
- MEDIUM: ssl: ignored file names ending as '.issuer' or '.ocsp'.
- MEDIUM: ssl: basic OCSP stapling support.
- MINOR: ssl/cli: Fix unapropriate comment in code on 'set ssl ocsp-response'
- MEDIUM: ssl: add 300s supported time skew on OCSP response update.
- MINOR: checks: mysql-check: Add support for v4.1+ authentication
- MEDIUM: ssl: Add the option to use standardized DH parameters >= 1024 bits
- MEDIUM: ssl: fix detection of ephemeral diffie-hellman key exchange by using the cipher description.
- MEDIUM: http: add actions "replace-header" and "replace-values" in http-req/resp
- MEDIUM: Break out check establishment into connect_chk()
- MEDIUM: Add port_to_str helper
- BUG/MEDIUM: fix ignored values for half-closed timeouts (client-fin and server-fin) in defaults section.
- BUG/MEDIUM: Fix unhandled connections problem with systemd daemon mode and SO_REUSEPORT.
- MINOR: regex: fix a little configuration memory leak.
- MINOR: regex: Create JIT compatible function that return match strings
- MEDIUM: regex: replace all standard regex function by own functions
- MEDIUM: regex: Remove null terminated strings.
- MINOR: regex: Use native PCRE API.
- MINOR: missing regex.h include
- DOC: Add Exim as Proxy Protocol implementer.
- BUILD: don't use type "uint" which is not portable
- BUILD: stats: workaround stupid and bogus -Werror=format-security behaviour
- BUG/MEDIUM: http: clear CF_READ_NOEXP when preparing a new transaction
- CLEANUP: http: don't clear CF_READ_NOEXP twice
- DOC: fix proxy protocol v2 decoder example
- DOC: fix remaining occurrences of "pattern extraction"
- MINOR: log: allow the HTTP status code to be logged even in TCP frontends
- MINOR: logs: don't limit HTTP header captures to HTTP frontends
- MINOR: sample: improve sample_fetch_string() to report partial contents
- MINOR: capture: extend the captures to support non-header keys
- MINOR: tcp: prepare support for the "capture" action
- MEDIUM: tcp: add a new tcp-request capture directive
- MEDIUM: session: allow shorter retry delay if timeout connect is small
- MEDIUM: session: don't apply the retry delay when redispatching
- MEDIUM: session: redispatch earlier when possible
- MINOR: config: warn when tcp-check rules are used without option tcp-check
- BUG/MINOR: connection: make proxy protocol v1 support the UNKNOWN protocol
- DOC: proxy protocol example parser was still wrong
- DOC: minor updates to the proxy protocol doc
- CLEANUP: connection: merge proxy proto v2 header and address block
- MEDIUM: connection: add support for proxy protocol v2 in accept-proxy
- MINOR: tools: add new functions to quote-encode strings
- DOC: clarify the CSV format
- MEDIUM: stats: report the last check and last agent's output on the CSV status
- MINOR: freq_ctr: introduce a new averaging method
- MEDIUM: session: maintain per-backend and per-server time statistics
- MEDIUM: stats: report per-backend and per-server time stats in HTML and CSV outputs
- BUG/MINOR: http: fix typos in previous patch
- DOC: remove the ultra-obsolete TODO file
- DOC: update roadmap
- DOC: minor updates to the README
- DOC: mention the maxconn limitations with the select poller
- DOC: commit a few old design thoughts files
These ones were design notes and ideas collected during the 1.5
development phase lying on my development machine. There might still
be some value in keeping them for future reference since they mention
certain corner cases.
Select()'s safe area is limited to 1024 FDs, and anything higher
than this will report "select: FAILED" on startup in debug mode,
so better document it.
The support is all based on static responses. This doesn't add any
request / response logic to HAProxy, but allows a way to update
information through the socket interface.
Currently certificates specified using "crt" or "crt-list" on "bind" lines
are loaded as PEM files.
For each PEM file, haproxy checks for the presence of file at the same path
suffixed by ".ocsp". If such file is found, support for the TLS Certificate
Status Request extension (also known as "OCSP stapling") is automatically
enabled. The content of this file is optional. If not empty, it must contain
a valid OCSP Response in DER format. In order to be valid an OCSP Response
must comply with the following rules: it has to indicate a good status,
it has to be a single response for the certificate of the PEM file, and it
has to be valid at the moment of addition. If these rules are not respected
the OCSP Response is ignored and a warning is emitted. In order to identify
which certificate an OCSP Response applies to, the issuer's certificate is
necessary. If the issuer's certificate is not found in the PEM file, it will
be loaded from a file at the same path as the PEM file suffixed by ".issuer"
if it exists otherwise it will fail with an error.
It is possible to update an OCSP Response from the unix socket using:
set ssl ocsp-response <response>
This command is used to update an OCSP Response for a certificate (see "crt"
on "bind" lines). Same controls are performed as during the initial loading of
the response. The <response> must be passed as a base64 encoded string of the
DER encoded response from the OCSP server.
Example:
openssl ocsp -issuer issuer.pem -cert server.pem \
-host ocsp.issuer.com:80 -respout resp.der
echo "set ssl ocsp-response $(base64 -w 10000 resp.der)" | \
socat stdio /var/run/haproxy.stat
This feature is automatically enabled on openssl 0.9.8h and above.
This work was performed jointly by Dirkjan Bussink of GitHub and
Emeric Brun of HAProxy Technologies.
This patch adds two new actions to http-request and http-response rulesets :
- replace-header : replace a whole header line, suited for headers
which might contain commas
- replace-value : replace a single header value, suited for headers
defined as lists.
The match consists in a regex, and the replacement string takes a log-format
and supports back-references.
The time statistics computed by previous patches are now reported in the
HTML stats in the tips related to the total sessions for backend and servers,
and as separate columns for the CSV stats.
Now that we can quote unsafe string, it becomes possible to dump the health
check responses on the CSV page as well. The two new fields are "last_chk"
and "last_agt".
Indicate that the text cells in the CSV format may contain quotes to
escape ambiguous texts. We don't have this case right now since we limit
the output, but it may happen in the future.
The "accept-proxy" statement of bind lines was still limited to version
1 of the protocol, while send-proxy-v2 is now available on the server
lines. This patch adds support for parsing v2 of the protocol on incoming
connections. The v2 header is automatically recognized so there is no
need for a new option.
This new directive captures the specified fetch expression, converts
it to text and puts it into the next capture slot. The capture slots
are shared with header captures so that it is possible to dump all
captures at once or selectively in logs and header processing.
The purpose is to permit logs to contain whatever payload is found in
a request, for example bytes at a fixed location or the SNI of forwarded
SSL traffic.
Similar to previous patches, HTTP header captures are performed when
a TCP frontend switches to an HTTP backend, but are not possible to
report. So let's relax the check to explicitly allow them to be present
in TCP frontends.
Log format is defined in the frontend, and some frontends may be chained to
an HTTP backend. Sometimes it's very convenient to be able to log the HTTP
status code of these HTTP backends. This status is definitely present in
the internal structures, it's just that we used to limit it to be used in
HTTP frontends. So let's simply relax the check to allow it to be used in
TCP frontends as well.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
Richard Russo reported that the example code in the PP spec is wrong
now that we slightly changed the format to merge <ver> and <cmd>. Also
rename the field <ver_cmd> to avoid any ambiguity on the usage.
MySQL will in stop supporting pre-4.1 authentication packets in the future
and is already giving us a hard time regarding non-silencable warnings
which are logged on each health check. Warnings look like the following:
"[Warning] Client failed to provide its character set. 'latin1' will be used
as client character set."
This patch adds basic support for post-4.1 authentication by sending the proper
authentication packet with the character set, along with the QUIT command.
Released version 1.5-dev26 with the following main changes :
- BUG/MEDIUM: polling: fix possible CPU hogging of worker processes after receiving SIGUSR1.
- BUG/MINOR: stats: fix a typo on a closing tag for a server tracking another one
- OPTIM: stats: avoid the calculation of a useless link on tracking servers in maintenance
- MINOR: fix a few memory usage errors
- CONTRIB: halog: Filter input lines by date and time through timestamp
- MINOR: ssl: SSL_CTX_set_options() and SSL_CTX_set_mode() take a long, not an int
- BUG/MEDIUM: regex: fix risk of buffer overrun in exp_replace()
- MINOR: acl: set "str" as default match for strings
- DOC: Add some precisions about acl default matching method
- MEDIUM: acl: strenghten the option parser to report invalid options
- BUG/MEDIUM: config: a stats-less config crashes in 1.5-dev25
- BUG/MINOR: checks: tcp-check must not stop on '\0' for binary checks
- MINOR: stats: improve alignment of color codes to save one line of header
- MINOR: checks: simplify and improve reporting of state changes when using log-health-checks
- MINOR: server: remove the SRV_DRAIN flag which can always be deduced
- MINOR: server: use functions to detect state changes and to update them
- MINOR: server: create srv_was_usable() from srv_is_usable() and use a pointer
- BUG/MINOR: stats: do not report "100%" in the thottle column when server is draining
- BUG/MAJOR: config: don't free valid regex memory
- BUG/MEDIUM: session: don't clear CF_READ_NOEXP if analysers are not called
- BUG/MINOR: stats: tracking servers may incorrectly report an inherited DRAIN status
- MEDIUM: proxy: make timeout parser a bit stricter
- REORG/MEDIUM: server: split server state and flags in two different variables
- REORG/MEDIUM: server: move the maintenance bits out of the server state
- MAJOR: server: use states instead of flags to store the server state
- REORG: checks: put the functions in the appropriate files !
- MEDIUM: server: properly support and propagate the maintenance status
- MEDIUM: server: allow multi-level server tracking
- CLEANUP: checks: rename the server_status_printf function
- MEDIUM: checks: simplify server up/down/nolb transitions
- MAJOR: checks: move health checks changes to set_server_check_status()
- MINOR: server: make the status reporting function support a reason
- MINOR: checks: simplify health check reporting functions
- MINOR: server: implement srv_set_stopped()
- MINOR: server: implement srv_set_running()
- MINOR: server: implement srv_set_stopping()
- MEDIUM: checks: simplify failure notification using srv_set_stopped()
- MEDIUM: checks: simplify success notification using srv_set_running()
- MEDIUM: checks: simplify stopping mode notification using srv_set_stopping()
- MEDIUM: stats: report a server's own state instead of the tracked one's
- MINOR: server: make use of srv_is_usable() instead of checking eweight
- MAJOR: checks: add support for a new "drain" administrative mode
- MINOR: stats: use the admin flags for soft enable/disable/stop/start on the web page
- MEDIUM: stats: introduce new actions to simplify admin status management
- MINOR: cli: introduce a new "set server" command
- MINOR: stats: report a distinct output for DOWN caused by agent
- MINOR: checks: support specific check reporting for the agent
- MINOR: checks: support a neutral check result
- BUG/MINOR: cli: "agent" was missing from the "enable"/"disable" help message
- MEDIUM: cli: add support for enabling/disabling health checks.
- MEDIUM: stats: report down caused by agent prior to reporting up
- MAJOR: agent: rework the response processing and support additional actions
- MINOR: stats: improve the stats web page to support more actions
- CONTRIB: halog: avoid calling time/localtime/mktime for each line
- DOC: document the workarouds for Google Chrome's bogus pre-connect
- MINOR: stats: report SSL key computations per second
- MINOR: stats: add counters for SSL cache lookups and misses
More and more people are complaining about the bugs experienced by
Chrome users due to the pre-connect feature and the fact that Chrome
does not monitor its connections and happily displays the error page
instead of re-opening a new connection. Since we can work around this
bug, let's document how to do it.
We now retrieve a lot of information from a single line of response, which
can be made up of various words delimited by spaces/tabs/commas. We try to
arrange all this and report whatever unusual we detect. The agent now supports :
- "up", "down", "stopped", "fail" for the operational states
- "ready", "drain", "maint" for the administrative states
- any "%" number for the weight
- an optional reason after a "#" that can be reported on the stats page
The line parser and processor should move to its own function so that
we can reuse the exact same one for http-based agent checks later.
This command supports "agent", "health", "state" and "weight" to adjust
various server attributes as well as changing server health check statuses
on the fly or setting the drain mode.
Now that it is possible to know whether a server is in forced maintenance
or inherits its maintenance status from another one, it is possible to
allow server tracking at more than one level. We still provide a loop
detection however.
Note that for the stats it's a bit trickier since we have to report the
check state which corresponds to the state of the server at the end of
the chain.
Function set_server_check_status() is very weird. It is called at the
end of a check to update the server's state before the new state is even
calculated, and possibly to log status changes, only if the proxy has
"option log-health-checks" set.
In order to do so, it employs an exhaustive list of the combinations
which can lead to a state change, while in practice almost all of
them may simply be deduced from the change of check status. Better,
some changes of check status are currently not detected while they
can be very valuable (eg: changes between L4/L6/TOUT/HTTP 500 for
example).
The doc was updated to reflect this.
Also, a minor change was made to consider s->uweight and not s->eweight
as meaning "DRAIN" since eweight can be null without the DRAIN mode (eg:
throttle, NOLB, ...).
Released version 1.5-dev25 with the following main changes :
- MEDIUM: connection: Implement and extented PROXY Protocol V2
- MINOR: ssl: clean unused ACLs declarations
- MINOR: ssl: adds fetchs and ACLs for ssl back connection.
- MINOR: ssl: merge client's and frontend's certificate functions.
- MINOR: ssl: adds ssl_f_sha1 fetch to return frontend's certificate fingerprint
- MINOR: ssl: adds sample converter base64 for binary type.
- MINOR: ssl: convert to binary ssl_fc_unique_id and ssl_bc_unique_id.
- BUG/MAJOR: ssl: Fallback to private session cache if current lock mode is not supported.
- MAJOR: ssl: Change default locks on ssl session cache.
- BUG/MINOR: chunk: Fix function chunk_strcmp and chunk_strcasecmp match a substring.
- MINOR: ssl: add global statement tune.ssl.force-private-cache.
- MINOR: ssl: remove fallback to SSL session private cache if lock init fails.
- BUG/MEDIUM: patterns: last fix was still not enough
- MINOR: http: export the smp_fetch_cookie function
- MINOR: http: generic pointer to rule argument
- BUG/MEDIUM: pattern: a typo breaks automatic acl/map numbering
- BUG/MAJOR: patterns: -i and -n are ignored for inlined patterns
- BUG/MINOR: proxy: unsafe initialization of HTTP transaction when switching from TCP frontend
- BUG/MINOR: http: log 407 in case of proxy auth
- MINOR: http: rely on the message body parser to send 100-continue
- MEDIUM: http: move reqadd after execution of http_request redirect
- MEDIUM: http: jump to dedicated labels after http-request processing
- BUG/MINOR: http: block rules forgot to increment the denied_req counter
- BUG/MINOR: http: block rules forgot to increment the session's request counter
- MEDIUM: http: move Connection header processing earlier
- MEDIUM: http: remove even more of the spaghetti in the request path
- MINOR: http: silently support the "block" action for http-request
- CLEANUP: proxy: rename "block_cond" to "block_rules"
- MEDIUM: http: emulate "block" rules using "http-request" rules
- MINOR: http: remove the now unused loop over "block" rules
- MEDIUM: http: factorize the "auth" action of http-request and stats
- MEDIUM: http: make http-request rules processing return a verdict instead of a rule
- MINOR: config: add minimum support for emitting warnings only once
- MEDIUM: config: inform the user about the deprecatedness of "block" rules
- MEDIUM: config: inform the user that "reqsetbe" is deprecated
- MEDIUM: config: inform the user only once that "redispatch" is deprecated
- MEDIUM: config: warn that '{cli,con,srv}timeout' are deprecated
- BUG/MINOR: auth: fix wrong return type in pat_match_auth()
- BUILD: config: remove a warning with clang
- BUG/MAJOR: http: connection setup may stall on balance url_param
- BUG/MEDIUM: http/session: disable client-side expiration only after body
- BUG/MEDIUM: http: correctly report request body timeouts
- BUG/MEDIUM: http: disable server-side expiration until client has sent the body
- MEDIUM: listener: make the accept function more robust against pauses
- BUILD: syscalls: remove improper inline statement in front of syscalls
- BUILD: ssl: SSL_CTX_set_msg_callback() needs openssl >= 0.9.7
- BUG/MAJOR: session: recover the correct connection pointer in half-initialized sessions
- DOC: add some explanation on the shared cache build options in the readme.
- MEDIUM: proxy: only adjust the backend's bind-process when already set
- MEDIUM: config: limit nbproc to the machine's word size
- MEDIUM: config: check the bind-process settings according to nbproc
- MEDIUM: listener: parse the new "process" bind keyword
- MEDIUM: listener: inherit the process mask from the proxy
- MAJOR: listener: only start listeners bound to the same processes
- MINOR: config: only report a warning when stats sockets are bound to more than 1 process
- CLEANUP: config: set the maxaccept value for peers listeners earlier
- BUG/MINOR: backend: only match IPv4 addresses with RDP cookies
- BUG/MINOR: checks: correctly configure the address family and protocol
- MINOR: tools: split is_addr() and is_inet_addr()
- MINOR: protocols: use is_inet_addr() when only INET addresses are desired
- MEDIUM: unix: add preliminary support for connecting to servers over UNIX sockets
- MEDIUM: checks: only complain about the missing port when the check uses TCP
- MEDIUM: unix: implement support for Linux abstract namespace sockets
- DOC: map_beg was missing from the table of map_* converters
- DOC: ebtree: indicate that prefix insertion/lookup may be used with strings
- MEDIUM: pattern: use ebtree's longest match to index/lookup string beginning
- BUILD: remove the obsolete BSD and OSX makefiles
- MEDIUM: unix: avoid a double connect probe when no data are sent
- DOC: stop referencing the slow git repository in the README
- BUILD: only build the systemd wrapper on Linux 2.6 and above
- DOC: update roadmap with completed tasks
- MEDIUM: session: implement half-closed timeouts (client-fin and server-fin)
Long-lived sessions are often subject to half-closed sessions resulting in
a lot of sessions appearing in FIN_WAIT state in the system tables, and no
way for haproxy to get rid of them. This typically happens because clients
suddenly disconnect without sending any packet (eg: FIN or RST was lost in
the path), and while the server detects this using an applicative heart
beat, haproxy does not close the connection.
This patch adds two new timeouts : "timeout client-fin" and
"timeout server-fin". The former allows one to override the client-facing
timeout when a FIN has been received or sent. The latter does the same for
server-facing connections, which is less useful.
These sockets are the same as Unix sockets except that there's no need
for any filesystem access. The address may be whatever string both sides
agree upon. This can be really convenient for inter-process communications
as well as for chaining backends to frontends.
These addresses are forced by prepending their address with "abns@" for
"abstract namespace".
Now that we know what processes a "bind" statement is attached to, we
have the ability to avoid starting some of them when they're not on the
proper process. This feature is disabled when running in foreground
however, so that debug mode continues to work with everything bound to
the first and only process.
The main purpose of this change is to finally allow the global stats
sockets to be each bound to a different process.
It can also be used to force haproxy to use different sockets in different
processes for the same IP:port. The purpose is that under Linux 3.9 and
above (and possibly other OSes), when multiple processes are bound to the
same IP:port via different sockets, the system is capable of performing
a perfect round-robin between the socket queues instead of letting any
process pick all the connections from a queue. This results in a smoother
load balancing and may achieve a higher performance with a large enough
maxaccept setting.
When a bind-process setting is present in a frontend or backend, we
now verify that the specified process range at least shares one common
process with those defined globally by nbproc. Then if the value is
set, it is reduced to the one enforced by nbproc.
A warning is emitted if process count does not match, and the fix is
done the following way :
- if a single process was specified in the range, it's remapped to
process #1
- if more than one process was specified, the binding is removed
and all processes are usable.
Note that since backends may inherit their settings from frontends,
depending on the declaration order, they may or may not be reported
as warnings.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Previously ssl_fc_unique_id and ssl_bc_unique_id return a string encoded
in base64 of the RFC 5929 TLS unique identifier. This patch modify those fetches
to return directly the ID in the original binary format. The user can make the
choice to encode in base64 using the converter.
i.e. : ssl_fc_unique_id,base64
ssl_f_sha1 is a binary binary fetch used to returns the SHA-1 fingerprint of
the certificate presented by the frontend when the incoming connection was
made over an SSL/TLS transport layer. This can be used to know which
certificate was chosen using SNI.
Adds ssl fetchs and ACLs for outgoinf SSL/Transport layer connection with their
docs:
ssl_bc, ssl_bc_alg_keysize, ssl_bc_cipher, ssl_bc_protocol, ssl_bc_unique_id,
ssl_bc_session_id and ssl_bc_use_keysize.
Released version 1.5-dev24 with the following main changes :
- MINOR: pattern: find element in a reference
- MEDIUM: http: ACL and MAP updates through http-(request|response) rules
- MEDIUM: ssl: explicitly log failed handshakes after a heartbeat
- DOC: Full section dedicated to the converters
- MEDIUM: http: register http-request and http-response keywords
- BUG/MINOR: compression: correctly report incoming byte count
- BUG/MINOR: http: don't report server aborts as client aborts
- BUG/MEDIUM: channel: bi_putblk() must not wrap before the end of buffer
- CLEANUP: buffers: remove unused function buffer_contig_space_with_res()
- MEDIUM: stats: reimplement HTTP keep-alive on the stats page
- BUG/MAJOR: http: fix timeouts during data forwarding
- BUG/MEDIUM: http: 100-continue responses must process the next part immediately
- MEDIUM: http: move skipping of 100-continue earlier
- BUILD: stats: let gcc know that last_fwd cannot be used uninitialized...
- CLEANUP: general: get rid of all old occurrences of "session *t"
- CLEANUP: http: remove the useless "if (1)" inherited from version 1.4
- BUG/MEDIUM: stats: mismatch between behaviour and doc about front/back
- MEDIUM: http: enable analysers to have keep-alive on stats
- REORG: http: move HTTP Connection response header parsing earlier
- MINOR: stats: always emit HTTP/1.1 in responses
- MINOR: http: add capture.req.ver and capture.res.ver
- MINOR: checks: add a new global max-spread-checks directive
- BUG/MAJOR: http: fix the 'next' pointer when performing a redirect
- MINOR: http: implement the max-keep-alive-queue setting
- DOC: fix alphabetic order of tcp-check
- MINOR: connection: add a new error code for SSL with heartbeat
- MEDIUM: ssl: implement a workaround for the OpenSSL heartbleed attack
- BUG/MEDIUM: Revert "MEDIUM: ssl: Add standardized DH parameters >= 1024 bits"
- BUILD: http: remove a warning on strndup
- BUILD: ssl: avoid a warning about conn not used with OpenSSL < 1.0.1
- BUG/MINOR: ssl: really block OpenSSL's response to heartbleed attack
- MINOR: ssl: finally catch the heartbeats missing the padding
This patch allows manipulation of ACL and MAP content thanks to any
information available in a session: source IP address, HTTP request or
response header, etc...
It's an update "on the fly" of the content of the map/acls. This means
it does not resist to reload or restart of HAProxy.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
These ones report a string as "HTTP/1.0" or "HTTP/1.1" depending on the
version of the request message or the response message, respectively.
The purpose is to be able to emit custom log lines reporting this version
in a persistent way.
In version 1.3.4, we got the ability to split configuration parts between
frontends and backends. The stats was attached to the backend and a control
was made to ensure that it was used only in a listen or backend section, but
not in a frontend.
The documentation clearly says that the statement may only be used in the
backend.
But since that same version above, the defaults stats configuration is
only filled in the frontend part of the proxy and not in the backend's.
So a backend will not get stats which are enabled in a defaults section,
despite what the doc says. However, a frontend configured after a defaults
section will get stats and will not emit the warning!
There were many technical limitations in 1.3.4 making it impossible to
have the stats working both in the frontend and backend, but now this has
become a total mess.
It's common however to see people create a frontend with a perfectly
working stats configuration which only emits a warning stating that it
might not work, adding to the confusion. Most people workaround the tricky
behaviour by declaring a "listen" section with no server, which was the
recommended solution in 1.3 where it was even suggested to add a dispatch
address to avoid a warning.
So the right solution seems to do the following :
- ensure that the defaults section's settings apply to the backends,
as documented ;
- let the frontends work in order not to break existing setups relying
on the defaults section ;
- officially allow stats to be declared in frontends and remove the
warninng
This patch should probably not be backported since it's not certain that
1.4 is fully compatible with having stats in frontends and backends (which
was really made possible thanks to applets).
Released version 1.5-dev23 with the following main changes :
- BUG/MINOR: reject malformed HTTP/0.9 requests
- MINOR: systemd wrapper: re-execute on SIGUSR2
- MINOR: systemd wrapper: improve logging
- MINOR: systemd wrapper: propagate exit status
- BUG/MINOR: tcpcheck connect wrong behavior
- MEDIUM: proxy: support use_backend with dynamic names
- MINOR: stats: Enhancement to stats page to provide information of last session time.
- BUG/MEDIUM: peers: fix key consistency for integer stick tables
- DOC: fix a typo on http-server-close and encapsulate options with double-quotes
- DOC: fix fetching samples syntax
- MINOR: ssl: add ssl_fc_unique_id to fetch TLS Unique ID
- MEDIUM: ssl: Use ALPN support as it will be available in OpenSSL 1.0.2
- DOC: fix typo
- CLEANUP: code style: use tabs to indent codes instead of spaces
- DOC: fix a few config typos.
- BUG/MINOR: raw_sock: also consider ENOTCONN in addition to EAGAIN for recv()
- DOC: lowercase format string in unique-id
- MINOR: set IP_FREEBIND on IPv6 sockets in transparent mode
- BUG/MINOR: acl: req_ssl_sni fails with SSLv3 record version
- BUG/MINOR: build: add missing objects in osx and bsd Makefiles
- BUG/MINOR: build: handle whitespaces in wc -l output
- BUG/MINOR: Fix name lookup ordering when compiled with USE_GETADDRINFO
- MEDIUM: ssl: Add standardized DH parameters >= 1024 bits
- BUG/MEDIUM: map: The map parser includes blank lines.
- BUG/MINOR: log: The log of quotted capture header has been terminated by 2 quotes.
- MINOR: standard: add function "encode_chunk"
- BUG/MINOR: http: fix encoding of samples used in http headers
- MINOR: sample: add hex converter
- MEDIUM: sample: change the behavior of the bin2str cast
- MAJOR: auth: Change the internal authentication system.
- MEDIUM: acl/pattern: standardisation "of pat_parse_int()" and "pat_parse_dotted_ver()"
- MEDIUM: pattern: The pattern parser no more uses <opaque> and just takes one string.
- MEDIUM: pattern: Change the prototype of the function pattern_register().
- CONTRIB: ip6range: add a network IPv6 range to mask converter
- MINOR: pattern: separe list element from the data part.
- MEDIUM: pattern: add indexation function.
- MEDIUM: pattern: The parse functions just return "struct pattern" without memory allocation
- MINOR: pattern: Rename "pat_idx_elt" to "pattern_tree"
- MINOR: sample: dont call the sample cast function "c_none"
- MINOR: standard: Add function for converting cidr to network mask.
- MEDIUM: sample: Remove types SMP_T_CSTR and SMP_T_CBIN, replace it by SMP_F_CONST flags
- MEDIUM: sample/http_proto: Add new type called method
- MINOR: dumpstats: Group map inline help
- MEDIUM: pattern: The function pattern_exec_match() returns "struct pattern" if the patten match.
- MINOR: dumpstats: change map inline sentences
- MINOR: dumpstats: change the "get map" display management
- MINOR: map/dumpstats: The cli cmd "get map ..." display the "int" format.
- MEDIUM: pattern: The match function browse itself the list or the tree.
- MEDIUM: pattern: Index IPv6 addresses in a tree.
- MEDIUM: pattern: add delete functions
- MEDIUM: pattern: add prune function
- MEDIUM: pattern: add sample lookup function.
- MEDIUM: pattern/dumpstats: The function pattern_lookup() is no longer used
- MINOR: map/pattern: The sample parser is stored in the pattern
- MAJOR: pattern/map: Extends the map edition system in the patterns
- MEDIUM: pattern: merge same pattern
- MEDIUM: pattern: The expected type is stored in the pattern head, and conversion is executed once.
- MINOR: pattern: Each pattern is identified by unique id.
- MINOR: pattern/acl: Each pattern of each acl can be load with specified id
- MINOR: pattern: The function "pattern_register()" is no longer used.
- MINOR: pattern: Merge function pattern_add() with pat_ref_push().
- MINOR: pattern: store configuration reference for each acl or map pattern.
- MINOR: pattern: Each pattern expression element store the reference struct.
- MINOR: dumpstats: display the reference for th key/pattern and value.
- MEDIUM: pattern: delete() function uses the pat_ref_elt to find the element to be removed
- MEDIUM: pattern_find_smp: functions find_smp uses the pat_ref_elt to find the element to be removed
- MEDIUM: dumpstats/pattern: display and use each pointer of each pattern dumped
- MINOR: pattern/map/acl: Centralization of the file parsers
- MINOR: pattern: Check if the file reference is not used with acl and map
- MINOR: acl/pattern: Acl "-M" option force to load file as map file with two columns
- MEDIUM: dumpstats: Display error message during add of values.
- MINOR: pattern: The function pat_ref_set() have now atomic behavior
- MINOR: regex: The pointer regstr in the struc regex is no longer used.
- MINOR: cli: Block the usage of the command "acl add" in many cases.
- MINOR: doc: Update the documentation about the map and acl
- MINOR: pattern: index duplicates
- MINOR: configuration: File and line propagation
- MINOR: dumpstat/conf: display all the configuration lines that using pattern reference
- MINOR: standard: Disable ip resolution during the runtime
- MINOR: pattern: Remove the flag "PAT_F_FROM_FILE".
- MINOR: pattern: forbid dns resolutions
- DOC: document "get map" / "get acl" on the CLI
- MEDIUM: acl: Change the acl register struct
- BUG/MEDIUM: acl: boolean only matches were broken by recent changes
- DOC: pattern: pattern organisation schematics
- MINOR: pattern/cli: Update used terms in documentation and cli
- MINOR: cli: remove information about acl or map owner.
- MINOR: session: don't always assume there's a listener
- MINOR: pattern: Add function to prune and reload pattern list.
- MINOR: standard: Add ipv6 support in the function url2sa().
- MEDIUM: config: Dynamic sections.
- BUG/MEDIUM: stick-table: fix IPv4-to-IPv6 conversion in src_* fetches
- MINOR: http: Add the "language" converter to for use with accept-language
- BUG/MINOR: log: Don't dump empty unique-id
- BUG/MAJOR: session: fix a possible crash with src_tracked
- DOC: Update "language" documentation
- MINOR: http: add the function "del-header" to the directives http-request and http-response
- DOC: add some information on capture.(req|res).hdr
- MINOR: http: capture.req.method and capture.req.uri
- MINOR: http: optimize capture.req.method and capture.req.uri
- MINOR: session: clean up the connection free code
- BUG/MEDIUM: checks: immediately report a connection success
- MEDIUM: connection: don't use real send() flags in snd_buf()
- OPTIM: ssl: implement dynamic record size adjustment
- MINOR: stats: report exact last session time in backend too
- BUG/MEDIUM: stats: the "lastsess" field must appear last in the CSV.
- BUG/MAJOR: check: fix memory leak in "tcp-check connect" over SSL
- BUG/MINOR: channel: initialize xfer_small/xfer_large on new buffers
- MINOR: channel: add the date of last read in the channel
- MEDIUM: stream-int: automatically disable CF_STREAMER flags after idle
- MINOR: ssl: add DEFAULT_SSL_MAX_RECORD to set the record size at build time
- MINOR: config: make the stream interface idle timer user-configurable
- MINOR: config: add global directives to set default SSL ciphers
- MINOR: sample: add a rand() sample fetch to return a sample.
- BUG/MEDIUM: config: immediately abort if peers section has no name
- BUG/MINOR: ssl: fix syntax in config error message
- BUG/MEDIUM: ssl: always send a full buffer after EAGAIN
- BUG/MINOR: config: server on-marked-* statement is ignored in default-server
- BUG/MEDIUM: backend: prefer-last-server breaks redispatch
- BUG/MEDIUM: http: continue to emit 503 on keep-alive to different server
- MEDIUM: acl: fix pattern type for payload / payload_lv
- BUG/MINOR: config: fix a crash on startup when a disabled backend references a peer
- BUG/MEDIUM: compression: fix the output type of the compressor name
- BUG/MEDIUM: http: don't start to forward request data before the connect
- MINOR: http: release compression context only in http_end_txn()
- MINOR: protect ebimtree/ebistree against multiple inclusions
- MEDIUM: proxy: create a tree to store proxies by name
- MEDIUM: proxy: make findproxy() use trees to look up proxies
- MEDIUM: proxy: make get_backend_server() use findproxy() to lookup proxies
- MEDIUM: stick-table: lookup table names using trees.
- MEDIUM: config: faster lookup for duplicated proxy name
- CLEANUP: acl: remove obsolete test in parse_acl_expr()
- MINOR: sample: move smp_to_type to sample.c
- MEDIUM: compression: consider the "q=" attribute in Accept-Encoding
- REORG: cfgparse: move server keyword parsing to server.c
- BUILD: adjust makefile for AIX 5.1
- BUG/MEDIUM: pattern: fix wrong definition of the pat_prune_fcts array
- CLEANUP: pattern: move array definitions to proto/ and not types/
- BUG/MAJOR: counters: check for null-deref when looking up an alternate table
- BUILD: ssl: previous patch failed
- BUILD/MEDIUM: standard: get rid of the last strcpy()
- BUILD/MEDIUM: standard: get rid of sprintf()
- BUILD/MEDIUM: cfgparse: get rid of sprintf()
- BUILD/MEDIUM: checks: get rid of sprintf()
- BUILD/MEDIUM: http: remove calls to sprintf()
- BUG/MEDIUM: systemd-wrapper: fix locating of haproxy binary
- BUILD/MINOR: ssl: remove one call to sprintf()
- MEDIUM: http: don't reject anymore message bodies not containing the url param
- MEDIUM: http: wait for the first chunk or message body length in http_process_body
- CLEANUP: http: rename http_process_request_body()
- CLEANUP: http: prepare dedicated processing for chunked encoded message bodies
- MINOR: http: make msg->eol carry the last CRLF length
- MAJOR: http: do not use msg->sol while processing messages or forwarding data
- MEDIUM: http: http_parse_chunk_crlf() must not advance the buffer pointer
- MAJOR: http: don't update msg->sov anymore while processing the body
- MINOR: http: add a small helper to compute the amount of body bytes present
- MEDIUM: http: add a small helper to compute how far to rewind to find headers
- MINOR: http: add a small helper to compute how far to rewind to find URI
- MEDIUM: http: small helpers to compute how far to rewind to find BODY and DATA
- MAJOR: http: reset msg->sov after headers are forwarded
- MEDIUM: http: forward headers again while waiting for connection to complete
- BUG/MINOR: http: deinitialize compression after a parsing error
- BUG/MINOR: http: deinitialize compression after a compression error
- MEDIUM: http: headers must be forwarded even if data was already inspected
- MAJOR: http: re-enable compression on chunked encoding
- MAJOR: http/compression: fix chunked-encoded response processing
- MEDIUM: http: cleanup: centralize a little bit HTTP compression end
- MEDIUM: http: start to centralize the forwarding code
- MINOR: http: further cleanups of response forwarding function
- MEDIUM: http: only allocate the temporary compression buffer when needed
- MAJOR: http: centralize data forwarding in the request path
- CLEANUP: http: document the response forwarding states
- CLEANUP: http: remove all calls to http_silent_debug()
- DOC: internal: add some reminders about HTTP parsing and pointer states
- BUG/MAJOR: http: fix bug in parse_qvalue() when selecting compression algo
- BUG/MINOR: stats: last session was not always set
- DOC: add pointer to the Cyril's HTML doc in the README
- MEDIUM: config: relax use_backend check to make the condition optional
- MEDIUM: config: report misplaced http-request rules
- MEDIUM: config: report misplaced use-server rules
- DOC: update roadmap with what was done.
Since it became possible to use log-format expressions in use_backend,
having a mandatory condition becomes annoying because configurations
are full of "if TRUE". Let's relax the check to accept no condition
like many other keywords (eg: redirect).
The syntax used to document fetching samples with optional arguments was not
always valid. This commit fixes this issue in order to allow an easier parsing
of the documentation.
This is the continuation of previous patch. Now that full buffers are
not rejected anymore, let's wait for at least the advertised chunk or
body length to be present or the buffer to be full. When either
condition is met, the message processing can go forward.
Thus we don't need to use url_param_post_limit anymore, which was passed
in the configuration as an optionnal <max_wait> parameter after the
"check_post" value. This setting was necessary when the feature was
implemented because there was no support for parsing message bodies.
The argument is now silently ignored if set in the configuration.
language(<value[;value[;value[;...]]]>[,<default>])
Returns the value with the highest q-factor from a list as
extracted from the "accept-language" header using "req.fhdr".
Values with no q-factor have a q-factor of 1. Values with a
q-factor of 0 are dropped. Only values which belong to the
list of semi-colon delimited <values> will be considered. If
no value matches the given list and a default value is
provided, it is returned. Note that language names may have
a variant after a dash ('-'). If this variant is present in
the list, it will be matched, but if it is not, only the base
language is checked. The match is case-sensitive, and the
output string is always one of those provided in arguments.
The ordering of arguments is meaningless, only the ordering
of the values in the request counts, as the first value among
multiple sharing the same q-factor is used.
Example :
# this configuration switches to the backend matching a
# given language based on the request :
acl de req.fhdr(accept-language),language(de;es;fr;en) de
acl es req.fhdr(accept-language),language(de;es;fr;en) es
acl fr req.fhdr(accept-language),language(de;es;fr;en) fr
acl en req.fhdr(accept-language),language(de;es;fr;en) en
use_backend german if de
use_backend spanish if es
use_backend french if fr
use_backend english if en
default_backend choose_your_language
