Since last commit there's no point anymore in having two variants of the
same function, let's switch to b_free() only. __b_drop() was renamed to
__b_free() for obvious consistency reasons.
A small race exists in buffers with "show sess all". This one wants to show
some information grabbed from the buffer (especially in HTX mode). But the
thread owning this buffer might just be releasing its area, right after a
free() or munmap() call, resulting in a head that is not seen as empty yet
though the area was released. It may then be dereferenced by "show sess all"
causing a crash. Note that in practice it only happens in debug mode with
UAF enabled, but it's tricky enough to fix it right now.
This should be backported to stable versions which support threads and a
store barrier. It's worth noting that by performing the clearing first,
b_free() and b_drop() now become two exact equivalent.
Commit 85b2cae63 ("MINOR: pools: make the thread harmless during the
mmap/munmap syscalls") was used to relax the pressure experienced by
other threads when running in debug mode with UAF enabled. It places
a pair of thread_harmless_now()/thread_harmless_end() around the call
to mmap(), assuming callers are not sensitive to parallel activity.
But there are a few cases like "show sess all" where this happens in
isolated threads, and marking the thread as harmless there is a very
bad idea, even worse when arriving to thread_harmless_end() which loops
forever.
Let's only do that when the thread is not isolated. No backport is
needed as the patch above was only in 2.1-dev.
It happens that upon looping threads the watchdog fires, starts a dump,
and other threads expire their budget while waiting for the other threads
to get dumped and trigger a watchdog event again, adding some confusion
to the traces. With this patch the situation becomes clearer as we export
the list of threads being dumped so that the watchdog can check it before
deciding to trigger. This way such threads in queue for being dumped are
not attempted to be reported in turn.
This should be backported to 2.0 as it helps understand stack traces.
This one was added by commit daacf3664 ("BUG/MEDIUM: protocols: add a
global lock for the init/deinit stuff") but I forgot to add it to the
include file, breaking DEBUG_THREAD.
Default HTTP error messages are stored in an array of chunks. And since the HTX
was added, these messages are also converted in HTX and stored in another
array. But now, the first array is not used anymore because the legacy HTTP mode
was removed.
So now, only the array with the HTX messages are kept. The other one was
removed.
Because the h2 multiplexer only uses the HTX mode, following H2 functions were
removed :
* h2_prepare_h1_reqline
* h2_make_h1_request()
* h2_make_h1_trailers()
Instead of using a array of (struct block), it is more natural and intuitive to
use an array of char. Indeed, not only (struct block) are stored in this array,
but also their payload.
<head> and <tail> fields are now signed 32-bits integers. For an empty HTX
message, these fields are set to -1. So the field <used> is now useless and can
safely be removed. To know if an HTX message is empty or not, we just compare
<head> against -1 (it also works with <tail>). The function htx_nbblks() has
been added to get the number of used blocks.
These calls can take quite some time and leave the thread harmless so
it's better to mark it as such. This makes "show sess" respond way
faster during high loads running on processes build with DEBUG_UAF
since these calls are stressed a lot.
When calling mmap(), in general the system gives us a page but does not
really allocate it until we first dereference it. And it turns out that
this time is much longer than the time to perform the mmap() syscall.
Unfortunately, when running with memory debugging enabled, we mmap/munmap()
each object resulting in lots of such calls and a high contention on the
allocator. And the first accesses to the page being done under the pool
lock is extremely damaging to other threads.
The simple fact of writing a 0 at the beginning of the page after
allocating it and placing the POOL_LINK pointer outside of the lock is
enough to boost the performance by 8x in debug mode and to save the
watchdog from triggering on lock contention. This is what this patch
does.
The malloc and free calls and especially the underlying mmap/munmap()
can occasionally take a huge amount of time and even cause the thread
to sleep. This is visible when haproxy is compiled with DEBUG_UAF which
causes every single pool allocation/free to allocate and release pages.
In this case, when using the locked pools, the watchdog can occasionally
fire under high contention (typically requesting 40000 1M objects in
parallel over 8 threads). Then, "perf top" shows that 50% of the CPU
time is spent in mmap() and munmap(). The reason the watchdog fires is
because some threads spin on the pool lock which is held by other threads
waiting on mmap() or munmap().
This patch modifies this so that the pool lock is released during these
syscalls. Not only this allows other threads to request try to allocate
their data in parallel, but it also considerably reduces the lock
contention.
Note that the locked pools are only used on small architectures where
high thread counts would not make sense, so this will not provide any
benefit in the general case. However it makes the debugging versions
way more stable, which is always appreciated.
The receive limit of an HTX channel must be calculated against the total size of
the HTX message. Otherwise, the buffer may never be seen as full whereas the
receive limit is 0. Indeed, the function channel_htx_full() already takes care
to add a block size to the buffer's reserve (8 bytes). So if the function
channel_htx_recv_limit() also keep a block size free in addition to the buffer's
reserve, it means that at least 2 block size will be kept free but only one will
be taken into account, freezing the stream if the option http-buffer-request is
enabled.
This patch fixes the Github issue #136. It should be backported to 2.0 and
1.9. Thanks jaroslawr (Jarosław Rzeszótko) for his help.
As its name suggest, this function change the value length of a block. But it
also update the HTX message accordingly. It simplifies the HTX API. The function
htx_set_blk_value_len() is still available and must be used with caution because
this one does not update the HTX message. It just updates the HTX block. It
should be considered as an internal function. When possible,
htx_change_blk_value_len() should be used instead.
This function is used to fix a bug affecting the 2.0. So, this patch must be
backported to 2.0.
The first one, HTX_SL_F_HAS_SCHM, will be used to know the request has an
explicit scheme. So, in H2, it is always true because the pseudo-header
":scheme" is mandatory. In H1, it is only true when an absolute URI is found on
the start-line. The other flags, HTX_SL_F_SCHM_HTTP and HTX_SL_F_SCHM_HTTPS,
will be used to know which scheme the request have. For now, other protocols are
not handled.
The aim of these flags is to pass this information to the backend side in
general, and to the H2 mux in particular. So the multiplexer will have a chance
to use this information to send the right scheme to the server.
The function htx_add_data_before() was removed because it was buggy. The
function htx_move_blk_before() may be used if necessary to do something
equivalent, except it just moves blocks. It doesn't handle the adding.
In an HTX message, it may have 2 available rooms to store a new block. The first
one is between the blocks and their payload. Blocks are added starting from the
end of the buffer and their payloads are added starting from the begining. So
the first free room is between these 2 edges. The second one is at the begining
of the buffer, when we start to wrap to add new payloads. Once we start to use
this one, the other one is ignored until the next defragmentation of the HTX
message.
In theory, there is no problem. But in practice, some lacks in the HTX structure
force us to defragment too often HTX messages to always be in a known state. The
second free room is not tracked as it should do and the first one may be easily
corrupted when rewrites happen.
So to fix the problem and avoid unecessary defragmentation, the HTX structure
has been refactored. The front (the block's position of the first payload before
the blocks) is no more stored. Instead we keep the relative addresses of 3 edges:
* tail_addr : The start address of the free space in front of the the blocks
table
* head_addr : The start address of the free space at the beginning
* end_addr : The end address of the free space at the beginning
Here is the general view of the HTX message now:
head_addr end_addr tail_addr
| | |
V V V
+------------+------------+------------+------------+------------------+
| | | | | |
| PAYLOAD | Free space | PAYLOAD | Free space | Blocks area |
| ==> | 1 | ==> | 2 | <== |
+------------+------------+------------+------------+------------------+
<head_addr> is always lower or equal to <end_addr> and <tail_addr>. <end_addr>
is always lower or equal to <tail_addr>.
In addition;, to simplify everything, the blocks area are now contiguous. It
doesn't wrap anymore. So the head is always the block with the lowest position,
and the tail is always the one with the highest position.
The function htx_add_data_before() is buggy and cannot work. It first add a data
block and then move it before another one, passed in argument. The problem
happens when a defragmentation is done to add the new block. In this case, the
reference is no longer valid, because the blocks are rearranged. So, instead of
moving the new block before the reference, it is moved at the head of the HTX
message.
So this function has been removed. It was only used by the compression filter to
add a last data block before a TLR, EOT or EOM block. Now, the new function
htx_add_last_data() is used. It adds a last data block, after all others and
before any TLR, EOT or EOM block. Then, the next bock is get. It is the first
non-data block after data in the HTX message. The compression loop continues
with it.
This patch must be backported to 1.9.
This function provides an alternate way to leave a critical section run
under thread_isolate(). Currently, a thread may remain in thread_release()
without having the time to notice that the rdv mask was released and taken
again by another thread entering thread_isolate() (often the same that just
released it). This is because threads wait in harmless mode in the loop,
which is compatible with the conditions to enter thread_isolate(). It's
not possible to make them wait with the harmless bit off or we cannot know
when the job is finished for the next thread to start in thread_isolate(),
and if we don't clear the rdv bit when going there, we create another
race on the start point of thread_isolate().
This new synchronous variant of thread_release() makes use of an extra
mask to indicate the threads that want to be synchronously released. In
this case, they will be marked harmless before releasing their sync bit,
and will wait for others to release their bit as well, guaranteeing that
thread_isolate() cannot be started by any of them before they all left
thread_sync_release(). This allows to construct synchronized blocks like
this :
thread_isolate()
/* optionally do something alone here */
thread_sync_release()
/* do something together here */
thread_isolate()
/* optionally do something alone here */
thread_sync_release()
And so on. This is particularly useful during initialization where several
steps have to be respected and no thread must start a step before the
previous one is completed by other threads.
This one must not be placed after any call to thread_release() or it would
risk to block an earlier call to thread_isolate() which the current thread
managed to leave without waiting for others to complete, and end up here
with the thread's harmless bit cleared, blocking others. This might be
improved in the future.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
The fd_sets we've been using in the log encoding functions are not portable
and were shown to break at least under Cygwin. This patch gets rid of them
in favor of the new bitmap functions. It was verified with the config below
that the log output was exactly the same before and after the change :
defaults
mode http
option httplog
log stdout local0
timeout client 1s
timeout server 1s
timeout connect 1s
frontend foo
bind :8001
capture request header chars len 255
backend bar
option httpchk "GET" "/" "HTTP/1.0\r\nchars: \x01\x02\x03\x04\x05\x06\x07\x08\x09\x0b\x0c\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f\x30\x31\x32\x33\x34\x35\x36\x37\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40\x41\x42\x43\x44\x45\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f\x50\x51\x52\x53\x54\x55\x56\x57\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff"
server foo 127.0.0.1:8001 check
We now have ha_bit_{set,clr,flip,test} to manipulate bitfields made
of arrays of longs. The goal is to get rid of the remaining non-portable
FD_{SET,CLR,ISSET} that still exist at a few places.
This type of blocks is useless because transition between data and trailers is
obvious. And when there is no trailers, the end-of-message is still there to
know when data end for chunked messages.
HTTP trailers are now parsed in the same way headers are. It means trailers are
converted to K/V blocks followed by an end-of-trailer marker. For now, to make
things simple, the type for trailer blocks are not the same than for header
blocks. But the aim is to make no difference between headers and trailers by
using the same type. Probably for the end-of marker too.
This patch adds minimalistic definitions to implement dictionary new data structure
which is an ebtree of ebpt_node structs with strings as keys. Note that this has nothing
to see with real dictionary data structure (maps of keys in association with values).
In lock profiles it's visible that there is a huge contention on the
buffer lock. The reason is that when offer_buffers() is called, it
systematically takes the lock before verifying if there is any
waiter. However doing so doesn't protect against races since a
waiter can happen just after we release the lock as well. Similarly
in h2 we take the lock every time an h2c is going to be released,
even without checking that the h2c belongs to a wait list. These
two have now been addressed by verifying non-emptiness of the list
prior to taking the lock.
Haproxy is designed to be able to continue to run even under very low
memory conditions. However this can sometimes have a serious impact on
performance that it hard to diagnose. Let's report counters of failed
pool and buffer allocations per thread in show activity.
In order to later allow htx_add_data() to transmit partial blocks and
avoid defragmenting the buffer, we'll need to return the number of bytes
consumed. This first modification makes the function do this and its
callers take this into account. At the moment the function still works
atomically so it returns either the block size or zero. However all
call places have been adapted to consider any value between zero and
the block size.
We don't store the start-line position anymore in the HTX message. Instead we
store the first block position to analyze. For now, it is almost the same. But
once all changes will be made on this part, this position will have to be used
by HTX analyzers, and only in the analysis context, to know where the analyse
should start.
When new blocks are added in an HTX message, if the first block position is not
defined, it is set. When the block pointed by it is removed, it is set to the
block following it. -1 remains the value to unset the position. the first block
position is unset when the HTX message is empty. It may also be unset on a
non-empty message, meaning every blocks were already analyzed.
From HTX analyzers point of view, this position is always set during headers
analysis. When they are waiting for a request or a response, if it is unset, it
means the analysis should wait. But once the analysis is started, and as long as
headers are not forwarded, it points to the message start-line.
As mentionned, outside the HTX analysis, no code must rely on the first block
position. So multiplexers and applets must always use the head position to start
a loop on an HTX message.
The field hdrs_bytes has been added in the structure htx_sl. It should be used
to set how many bytes are help by all headers, from the start-line to the
corresponding EOH block. it must be set to -1 if it is unknown.
This functions should be used to get the maximum size for a block, not exceeding
the max amount of bytes passed in argument. Thus max may be set to -1 to have no
limit.
It is the first block relatively to the start-line. So it is the start-line if
its position is set (sl_pos != -1), otherwise it is the head. The functions
htx_get_first() and htx_get_first_blk() can be used to get it. This change is
mandatory to consider 1xx informational messages as part of a response.
The head of an HTX message is heavily used whereas the wrap position is only
used when a block is added or removed. So it is more logical to store the head
position in the HTX message instead of the wrap one. The wrap position can be
easily deduced. To get it, the new function htx_get_wrap() may be used.
On armv7 haproxy doesn't work because of the fixes on the double-word
CAS. There are two issues. The first one is that the last argument in
case of dwcas is a pointer to the set of value and not a value ; the
second is that it's not enough to cast the data as (void*) since it will
be a single word. Let's fix this by using the pointers as an array of
long. This was tested on i386, armv7, x86_64 and aarch64 and it is now
fine. An alternate approach using a struct was attempted as well but it
used to produce less optimal code.
This fix must be backported to 1.9. This fixes github issue #105.
Cc: Olivier Houchard <ohouchard@haproxy.com>
The purpose is to manipulate rings made of series of buffers so that
it is possible to continue to work on a next buffer once one is full.
This will be used by muxes to deal with contention between multiple
streams and a single output buffer. No data is expected to span over
multiple buffers, all of them will be used like a regular buffer. This
will significantly limit the amount of changes and the code complexity
while still supporting larger output buffering.
The ring is made of a head and a tail indexes both of which point to a
buffer descriptor. At least one descriptor is always valid, so it could
be seen as a form of pagination always presenting one buffer. The root
of the ring is itself stored into a buffer descriptor so that the user
only has to declare a buffer array and to call br_init() on it in order
to use it.
It has not been used for many years, is unlikely to be reused and
conflicts with the similarly named macro in flt_trace, causing warnings
at build time when including debug.h in low-level files. Let's simply
remove it.
SI_TKILL is for Linux. We're again in the non-portable area. Both OSes
use macros to define these values so we can #ifdef them. Let's make
SI_TKILL defined based on SI_LWP when only the latter is defined.
We still have quite a number of build macros which are mapped 1:1 to a
USE_something setting in the makefile but which have a different name.
This patch cleans this up by renaming them to use the USE_something
one, allowing to clean up the makefile and make it more obvious when
reading the code what build option needs to be added.
The following renames were done :
ENABLE_POLL -> USE_POLL
ENABLE_EPOLL -> USE_EPOLL
ENABLE_KQUEUE -> USE_KQUEUE
ENABLE_EVPORTS -> USE_EVPORTS
TPROXY -> USE_TPROXY
NETFILTER -> USE_NETFILTER
NEED_CRYPT_H -> USE_CRYPT_H
CONFIG_HAP_CRYPT -> USE_LIBCRYPT
CONFIG_HAP_NS -> DUSE_NS
CONFIG_HAP_LINUX_SPLICE -> USE_LINUX_SPLICE
CONFIG_HAP_LINUX_TPROXY -> USE_LINUX_TPROXY
CONFIG_HAP_LINUX_VSYSCALL -> USE_LINUX_VSYSCALL
It seems it's not defined on FreeBSD while it's mentioned on Linux that
clock_gettime() can be detected using this. Given that we also have the
test for _POSIX_TIMERS>0 that should cover it well enough. If it breaks
on other systems, we'll see.
Report was here :
https://github.com/haproxy/haproxy/runs/133866993
