In the function stream_int_notify(), when the opposite stream-interface is
blocked because there is no more room into the input buffer, if the flag
CF_WRITE_PARTIAL is set on this buffer, it is unblocked. It is a way to unblock
the reads on the other side because some data was sent.
But it is a problem during the fast-forwarding because only the stream is able
to remove the flag CF_WRITE_PARTIAL. So it is possible to have this flag because
of a previous send while the input buffer of the opposite stream-interface is
now full. In such case, the opposite stream-interface will be woken up for
nothing because its input buffer is full. If the same happens on the opposite
side, we will have a loop consumming all the CPU.
To fix the bug, the opposite side is now only notify if there is some available
room in its input buffer in the function si_cs_send(), so only if some data was
sent.
This patch must be backported to 2.0 and 1.9.
The receive limit of an HTX channel must be calculated against the total size of
the HTX message. Otherwise, the buffer may never be seen as full whereas the
receive limit is 0. Indeed, the function channel_htx_full() already takes care
to add a block size to the buffer's reserve (8 bytes). So if the function
channel_htx_recv_limit() also keep a block size free in addition to the buffer's
reserve, it means that at least 2 block size will be kept free but only one will
be taken into account, freezing the stream if the option http-buffer-request is
enabled.
This patch fixes the Github issue #136. It should be backported to 2.0 and
1.9. Thanks jaroslawr (Jarosław Rzeszótko) for his help.
In the HTX structure, the field <first> is used to know where to (re)start the
analysis. It may differ from the message's head. It is especially important to
update it to handle 1xx messages, to be sure to restart the analysis on the next
message (another 1xx message or the final one). It is also updated when some
data are forwarded (the headers or part of the body). But this update is an
error and must never be done at the analysis level. It is a bug, because some
sample fetches may be used after the data forwarding (but before the first send
of course). At this stage, if the first block position does not point on the
start-line, most of HTTP sample fetches fail.
So now, when something is forwarding by HTX analyzers, the first block position
is not update anymore.
This issue was reported on Github. See #119. No backport needed.
When channel_full() is called for an HTX stream, we fall back on the HTX
version. This function is called, among other, from tcp_inspect_request(). With
this patch, the inspect delay is respected again.
This patch must be backported to 1.9.
In channel_htx_forward() and channel_htx_forward_forever(), if the HTX message
is empty, the underlying buffer may be really empty too. And we have no warranty
the caller will call htx_to_buf() later. And in practice, it is almost never
done. So the channel's buffer must not be altered. Otherwise, the buffer may be
considered as full (data == size) for an empty HTX message and no outgoing data.
This patch must be backported to 1.9.
The functions channel_htx_fwd_payload() and channel_htx_fwd_all() should now be
used to forward, respectively, a part of the HTX payload or all of it. These
functions forward data and update the first block position.
We don't store the start-line position anymore in the HTX message. Instead we
store the first block position to analyze. For now, it is almost the same. But
once all changes will be made on this part, this position will have to be used
by HTX analyzers, and only in the analysis context, to know where the analyse
should start.
When new blocks are added in an HTX message, if the first block position is not
defined, it is set. When the block pointed by it is removed, it is set to the
block following it. -1 remains the value to unset the position. the first block
position is unset when the HTX message is empty. It may also be unset on a
non-empty message, meaning every blocks were already analyzed.
From HTX analyzers point of view, this position is always set during headers
analysis. When they are waiting for a request or a response, if it is unset, it
means the analysis should wait. But once the analysis is started, and as long as
headers are not forwarded, it points to the message start-line.
As mentionned, outside the HTX analysis, no code must rely on the first block
position. So multiplexers and applets must always use the head position to start
a loop on an HTX message.
The function channel_htx_fwd_headers() should now be used by HTX analyzers to
forward all headers of an HTX message, from the start-line to the corresponding
EOH. It takes care to update the star-line position.
When channel_recv_max() is called for an HTX stream, we fall back on the HTX
version. This function is called from si_cs_recv(). This will let us pass the
max amount of bytes to read to HTX multiplexers.
In channel_erase(), don't forget to set output to 0, otherwise the
channel won't seem empty, when it really is, and that could lead to
stream never closing properly.
This should be backported to 1.9.
I found on an (old) AIX 5.1 machine that stdint.h didn't exist while
inttypes.h which is expected to include it does exist and provides the
desired functionalities.
As explained here, stdint being just a subset of inttypes for use in
freestanding environments, it's probably always OK to switch to inttypes
instead:
https://pubs.opengroup.org/onlinepubs/009696799/basedefs/stdint.h.html
Also it's even clearer here in the autoconf doc :
https://www.gnu.org/software/autoconf/manual/autoconf-2.61/html_node/Header-Portability.html
"The C99 standard says that inttypes.h includes stdint.h, so there's
no need to include stdint.h separately in a standard environment.
Some implementations have inttypes.h but not stdint.h (e.g., Solaris
7), but we don't know of any implementation that has stdint.h but not
inttypes.h"
It is the HTX version of co_skip(). Internally, It uses the function htx_drain().
It will be used by other commits to fix bugs, so it must be backported to 1.9.
in co_skip(), the flag CF_WRITE_PARTIAL is set on the channel. The flag
CF_WROTE_DATA must also be set to notify the channel some data were sent.
This patch must be backported to 1.9.
The function channel_htx_truncate() can now be used on HTX buffer to truncate
all incoming data, keeping outgoing one intact. This function relies on the
function channel_htx_erase() and htx_truncate().
This patch may be backported to 1.9. If so, the patch "MINOR: channel/htx: Add
the HTX version of channel_truncate()" must also be backported.
HTX versions for functions to test the free space in input against the reserve
have been added. Now, on HTX streams, following functions can be used:
* channel_htx_may_recv
* channel_htx_recv_limit
* channel_htx_recv_max
* channel_htx_full
This patch must be backported in 1.9 because it will be used by a futher patch
to fix a bug.
This function must be called when new incoming data are pushed in the channel's
buffer. It updates the channel state and take care of the fast forwarding by
consuming right amount of data and decrementing "->to_forward" accordingly when
necessary. In fact, this patch just moves a part of ci_putblk in a dedicated
function.
This patch must be backported to 1.9.
All the HTX definition is self-contained and doesn't really depend on
anything external since it's a mostly protocol. In addition, some
external similar files (like h2) also placed in common used to rely
on it, making it a bit awkward.
This patch moves the two htx.h files into a single self-contained one.
The historical dependency on sample.h could be also removed since it
used to be there only for http_meth_t which is now in http.h.
To ease the fast forwarding and the infinte forwarding on HTX proxies, 2
functions have been added to let the channel be almost aware of the way data are
stored in its buffer. By calling these functions instead of legacy ones, we are
sure to forward the right amount of data.
The behaviour of the flag CF_WRITE_PARTIAL was modified by commit
95fad5ba4 ("BUG/MAJOR: stream-int: don't re-arm recv if send fails") due
to a situation where it could trigger an immediate wake up of the other
side, both acting in loops via the FD cache. This loss has caused the
need to introduce CF_WRITE_EVENT as commit c5a9d5bf, to replace it, but
both flags express more or less the same thing and this distinction
creates a lot of confusion and complexity in the code.
Since the FD cache now acts via tasklets, the issue worked around in the
first patch no longer exists, so it's more than time to kill this hack
and to restore CF_WRITE_PARTIAL's semantics (i.e.: there has been some
write activity since we last left process_stream).
This patch mostly reverts the two commits above. Only the part making
use of CF_WROTE_DATA instead of CF_WRITE_PARTIAL to detect the loss of
data upon connection setup was kept because it's more accurate and
better suited.
This is a partial revert of the commit deccd1116 ("MEDIUM: mux: make
mux->snd_buf() take the byte count in argument"). It is a requirement to do
zero-copy transfers. This will be mandatory when the TX buffer of the
conn_stream will be used.
So, now, data are consumed by mux->snd_buf() and not only sent. So it needs to
update the buffer state. On its side, the caller must be aware the buffer can be
replaced y an empty or unallocated one.
As a side effet of this change, the function co_set_data() is now only responsible
to update the channel set, by update ->output field.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
It used to be called 'len' during the reorganisation but strictly speaking
it's not a length since it wraps. Also we already use '_data' as the suffix
to count available data, and data is also what we use to indicate the amount
of data in a pipe so let's improve consistency here. It was important to do
this in two operations because data used to be the name of the pointer to
the storage area.
There was no point keeping that function in the buffer part since it's
exclusively used by HTTP at the channel level, since it also automatically
appends the CRLF. This further cleans up the buffer code.
Since we never access this field directly anymore, but only through the
channel's wrappers, it can now move to the channel. The buffers are now
completely free from the distinction between input and output data.
b_del() is used in :
- mux_h2 with the demux buffer : always processes input data
- checks with output data though output is not considered at all there
- b_eat() which is not used anywhere
- co_skip() where the len is always <= output
Thus the distinction for output data is not needed anymore and the
decrement can be made inconditionally in co_skip().
This is intentionally the minimal and safest set of changes, some cleanups
area still required. These changes are quite tricky and cannot be
independantly tested, so it's important to keep this patch as bisectable
as possible.
buf_empty and buf_wanted were changed and are now exactly similar since
there's no <p> member in the structure anymore. Given that no test is
ever made in the code to check that buf == &buf_wanted, it may be possible
that we don't need to have two anymore, unless some buf_empty tests have
precedence. This will have to be investigated.
A significant part of this commit affects the HTTP compression code,
which used to deeply manipulate the input and output buffers without
any reasonable solution for a better abstraction. For this reason, if
any regression is met and designates this patch as the culprit, it is
important to run tests which specifically involve compression or which
definitely don't use it in order to spot the issue.
Cc: Olivier Houchard <ohouchard@haproxy.com>
For the same consistency reasons, let's use b_empty() at the few places
where an empty buffer is expected, or c_empty() if it's done on a channel.
Some of these places were there to realign the buffer so
{b,c}_realign_if_empty() was used instead.
Now that there are no more users requiring to modify the buffer anymore,
switch these ones to const char and const buffer. This will make it more
obvious next time send functions are tempted to modify the buffer's output
count. Minor adaptations were necessary at a few call places which were
using char due to the function's previous prototype.
Till now the callers had to know which one to call for specific use cases.
Let's fuse them now since a single one will remain after the API migration.
Given that bi_del() may only be used where o==0, just combine the two tests
by first removing output data then only input.
This function was sometimes used from a channel and sometimes from a buffer.
In both cases it requires knowledge of the size of the output data (to skip
them). Here the split ensures the channel can deal with this point, and that
other places not having output data can continue to work.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
The few call places where it's used can use the trash as a swap buffer,
which is made for this exact purpose. This way we can rely on the
generic b_slow_realign() call.
Where relevant, the channel version is used instead. The buffer version
was ported to be more generic and now takes a swap buffer and the output
byte count to know where to set the alignment point. The H2 mux still
uses buffer_slow_realign() with buf->o but it will change later.
This adds :
- c_orig() : channel buffer's origin
- c_size() : channel buffer's size
- c_wrap() : channel buffer's wrapping location
- c_data() : channel buffer's total data count
- c_room() : room left in channel buffer's
- c_empty() : true if channel buffer is empty
- c_full() : true if channel buffer is full
- c_ptr() : pointer to an offset relative to input data in the buffer
- c_adv() : advances the channel's buffer (bytes become part of output)
- c_rew() : rewinds the channel's buffer (output bytes not output anymore)
- c_realign_if_empty() : realigns the buffer if it's empty
- co_data() : # of output data
- co_head() : beginning of output data
- co_tail() : end of output data
- ci_data() : # of input data
- ci_head() : beginning of input data
- ci_tail() : end of input data
- ci_stop() : location after ci_tail()
- ci_next() : pointer to next input byte
And for the ci_* / co_* functions above, the "__*" variants which disable
wrapping checks, and the "_ofs" variants which return an offset relative to
the buffer's origin instead.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
When a write activity is reported on a channel, it is important to keep this
information for the stream because it take part on the analyzers' triggering.
When some data are written, the flag CF_WRITE_PARTIAL is set. It participates to
the task's timeout updates and to the stream's waking. It is also used in
CF_MASK_ANALYSER mask to trigger channels anaylzers. In the past, it was cleared
by process_stream. Because of a bug (fixed in commit 95fad5ba4 ["BUG/MAJOR:
stream-int: don't re-arm recv if send fails"]), It is now cleared before each
send and in stream_int_notify. So it is possible to loss this information when
process_stream is called, preventing analyzers to be called, and possibly
leading to a stalled stream.
Today, this happens in HTTP2 when you call the stat page or when you use the
cache filter. In fact, this happens when the response is sent by an applet. In
HTTP1, everything seems to work as expected.
To fix the problem, we need to make the difference between the write activity
reported to lower layers and the one reported to the stream. So the flag
CF_WRITE_EVENT has been added to notify the stream of the write activity on a
channel. It is set when a send succedded and reset by process_stream. It is also
used in CF_MASK_ANALYSER. finally, it is checked in stream_int_notify to wake up
a stream and in channel_check_timeouts.
This bug is probably present in 1.7 but it seems to have no effect. So for now,
no needs to backport it.
There's no point having the channel marked writable as these functions
only extract data from the channel. The code was retrieved from their
ci/co ancestors.
For HTTP/2 we'll need some buffer-only equivalent functions to some of
the ones applying to channels and still squatting the bi_* / bo_*
namespace. Since these names have kept being misleading for quite some
time now and are really getting annoying, it's time to rename them. This
commit will use "ci/co" as the prefix (for "channel in", "channel out")
instead of "bi/bo". The following ones were renamed :
bi_getblk_nc, bi_getline_nc, bi_putblk, bi_putchr,
bo_getblk, bo_getblk_nc, bo_getline, bo_getline_nc, bo_inject,
bi_putchk, bi_putstr, bo_getchr, bo_skip, bi_swpbuf
