Now that the modified lockless variant does not need a DWCAS anymore,
there's no reason to keep the much slower locked version, so let's
just get rid of it.
Move functions related to errors output on stderr from log.c to a newly
created errors.c file. It targets print_message and
ha_alert/warning/notice/diag functions and related startup_logs feature.
This adds the following CPUs to the makefile:
- armv81 : modern ARM cores (Cortex A55/A75/A76/A78/X1, Neoverse, Graviton2)
- a72 : ARM Cortex-A72 or A73 (e.g. RPi4, Odroid N2, VIM3, AWS Graviton)
- a53 : ARM Cortex-A53 or any of its successors in 64-bit mode (e.g. RPi3)
- armv8-auto: both older and newer ARMv8 cores, with a minor runtime penalty
The reasons for these ones are:
- a53 is the common denominator of all of its successors, and does
support CRC32 which is used by the gzip compression, that the generic
armv8-a does not ;
- a72 supports the same features but is an out-of-order one that deserves
better optimizations; it's found in a number of high-performance
multi-core CPUs mainly oriented towards I/O and network processing
(Armada 8040, NXP LX2160A, AWS Graviton), and more recently the
Raspberry Pi 4. The A73 found in VIM3 and Odroid-N2 can use the same
optimizations ;
- armv81 is for generic ARMv8.1-A and above, automatically enables LSE
atomics which are way more scalable, and CRC32. This one covers modern
ARMv8 cores such as Cortex A55/A75/A76/A77/A78/X1 and the Neoverse
family such as found in AWS's Graviton2. The LSE instructions are
essential for large numbers of cores (8 and above).
- armv8-auto dynamically enables support for LSE extensions when
detected while still being compatible with older cores. There is a
small performance penalty in doing this (~3%) but a same executable
will perform optimally on a wider range of hardware. This should be
the best option for distros. It requires gcc-10 or gcc-9.4 and above.
When no CPU is specified, GCC version 10.2 and above will automatically
implement the wrapper used to detect the LSE extensions.
This is the per-release reordering to improve build parallelism.
It didn't change much, mostly dns+resolvers inflated this time.
Nowadays build times are mostly dominated by the long dependencies
of include files, no less than 170MB of preprocessed code has to be
built, and half of this is SSL support is disabled. Includes should
likely be reworked to be smaller with less dependencies each,
possibly splitting what's the core of each of them and what is used
to interface with other ones. Each split of a .C file in two adds
0.3s of build time just because of this.
It is not enabled by default, and may only work on linux-glibc for now,
though maybe other platforms could adopt it, possibly with certain
restrictions.
This module can be used to manipulate a cpu sets in a platform agnostic
way. Use the type cpu_set_t/cpuset_t if available on the platform, or
fallback to unsigned long, which limits de facto the maximum cpu index
to LONGBITS.
Now that SLZ is merged, let's update the makefile and compression
files to use it. As a result, SLZ_INC and SLZ_LIB are neither defined
nor used anymore.
USE_SLZ is enabled by default ("USE_SLZ=default") and can be disabled
by passing "USE_SLZ=" or by enabling USE_ZLIB=1.
The doc was updated to reflect the changes.
As reported by @axinojolais in issue #1217, some older bourne shells do
not expand on braces so some files were not cleaned since the recent
splitting of the contrib/ subdir. Let's fix that by explicitly listing
the patterns to be cleared (which are in much smaller quantity now that
contrib was removed), and for grouping them with their respective dirs.
At some point, some recursive makefiles would probably help there.
We're going to make the local pool always present unless pools are
completely disabled. This means that pools are always enabled by
default, regardless of the use of threads. Let's drop this notion
of "local" pools and make it just "pool". The equivalent debug
option becomes DEBUG_NO_POOLS instead of DEBUG_NO_LOCAL_POOLS.
For now this changes nothing except the option and dropping the
dependency on USE_THREAD.
It is a workaround to avoid a clang 11 bug that exits with SIGABRT when
stderr is redirected to stdin. This bug was already reported few weeks ago:
https://bugs.llvm.org/show_bug.cgi?id=49463
But because it is pretty annoying, the standard error is now redirected to
/dev/null.
This library is required for the subsequent patch which adds
the JSON query possibility.
It is necessary to change the include statement in "src/mjson.c"
because the imported includes in haproxy are in "include/import"
orig: #include "mjson.h"
new: #include <import/mjson.h>
This one is the last optional module to build with haproxy, so let's move
it to addons/. It was renamed to "ot" as it was the only one whose USE_*
option did not match the directory name, now this is consistent.
Few changes were required, only the Makefile, and doc were adjusted, as
the directory was already self-contained and relocatable.
Both the source file and the dummy library are now at the same place.
Maybe the build howto could be moved there as well to make things even
cleaner.
The Makefile, MAINTAINERS, doc, and vtest matrix were updated.
Both the source file and the dummy library are now at the same place.
Maybe the build howto could be moved there as well to make things even
cleaner.
The Makefile, MAINTAINERS, doc, github build matrix, coverity checks
and travis CI's build were updated.
Now it's much cleaner, both 51d.c and the dummy library live together and
are easier to spot and maintain. The build howto probably ought to be moved
there as well. Makefile, docs and MAINTAINERS were updated, as well as
the github CI's build matrix, travis CI's, and coverity checks.
Let's start to better organize the addons by moving promex there (and
with an easier directory name). The makefile and maintainers files were
updated, as well as the CI's build matrix.
The Prometheus exporter has gained in popularity and deserves to be easier
to build. Let's add a standard "USE_PROMEX" variable to enable it without
having to modify EXTRA_OBJS nor fiddling with the build path. The readme
was updated to reflect this.
halog currently emits lots of warnings because it does not benefit from
the default flags. Let's update the main makefile to build it by itself
and remove the other one. The sub-project's makefile was replaced with
A readme indicating how to build it.
The following components were moved to admin/ because they're generally
used in field by admins:
iprange/ netsnmp-perl/ selinux/ systemd/ wireshark-dissectors/
syntax-highlight/ release-estimator/
The few hpack development tools are now integrated into the main
makefile, which allows to remove the original one which was causing
lots of build warnings. A README was added to explain how to build
instead.
This utility is absolutely required for developers and not having it
built by default is a real pain that tends to encourage keeping an
outdated copy somewhere else. Let's have it built by default then,
since it has no dependency and is ultra-small.
The following directories were moved from contrib/ to dev/ to make their
use case a bit clearer. In short, only developers are expected to ever
go there. The makefile was updated to build and clean from these ones.
base64/ flags/ hpack/ plug_qdisc/ poll/ tcploop/ trace/
Now poll is its own project and doesn't share the "flags" Makefile
any more. One of the issues was that it was making references to the
haproxy include path which is not needed here.
Create a new module init which contains code related to REGISTER_*
macros for initcalls. init.h is included in api.h to make init code
available to all modules.
It's a step to clean up a bit haproxy.c/global.h.
The proto "uxdg" (UNIX DGRAM) was not declared, causing an error trying
to put a socket unix on "dgram-bind" into a log-forward section.
This patch introduces the missing "uxdg" protocol by adding proto_uxdg.c
which was fully created based on the code available for the other
protocols.
This patch should be backported to version 2.3 and above.
gcc returns non zero code if an option is not supported (tested
from 6.5 to 10.2).
$ gcc -Wfoobar -E -xc - -o /dev/null < /dev/null > /dev/null 2>&1 ; echo $?
1
clang always return 0 if an option in not recognized unless
-Werror is also passed, preventing a correct probing of options
supported by the compiler (tested with clang 6.0.1 to 11.1.0).
$ clang -Wfoobar -E -xc - -o /dev/null < /dev/null > /dev/null 2>&1 ; echo $?
0
$ clang -Werror -Wfoobar -E -xc - -o /dev/null < /dev/null > /dev/null 2>&1 ; echo $?
1
Please note today this is not visible since clang 11 exit with SIGABRT
or with return code 1 on older version due to bad file descriptor from
file descriptor handling
$ clang -Wfoobar -E -xc - -o /dev/null < /dev/null 2>&0 ; echo $?
Aborted (core dumped)
134
$ clang -Wfoobar -E -xc - -o /dev/null < /dev/null ; echo $?
warning: unknown warning option '-Wfoobar'; did you mean '-Wformat'? [-Wunknown-warning-option]
1 warning generated.
0
$ clang-11 -Werror -Wfoobar -E -xc - -o /dev/null < /dev/null ; echo $?
error: unknown warning option '-Wfoobar'; did you mean '-Wformat'? [-Werror,-Wunknown-warning-option]
1
This specific issue is being tracked with clang upstream in https://bugs.llvm.org/show_bug.cgi?id=49463
The DeviceAtlas Detection API now supports also the pcre2 library,
and some users wish to have exclusively this version in their
environment.
Also, there is no longer new development happening in the legacy
pcre(1) counterpart.
Simple check in the build process as the mutual exclusivity check between the
two are already taking care of early on. Moving the check to the part
only when we build haproxy + the API from source as the other case the API is
already built with the chosen regex library separately.
The idea is to know who woke a task up, by recording the last two
callers in a rotating mode. For now it's trivial with task_wakeup()
but tasklet_wakeup_on() will require quite some more changes.
This typically gives this from the debugger:
(gdb) p t->debug
$2 = {
caller_file = {0x0, 0x8c0d80 "src/task.c"},
caller_line = {0, 260},
caller_idx = 1
}
or this:
(gdb) p t->debug
$6 = {
caller_file = {0x7fffe40329e0 "", 0x885feb "src/stream.c"},
caller_line = {284, 284},
caller_idx = 1
}
But it also provides a trivial macro allowing to simply place a call in
a task/tasklet handler that needs to be observed:
DEBUG_TASK_PRINT_CALLER(t);
Then starting haproxy this way would trivially yield such info:
$ ./haproxy -db -f test.cfg | sort | uniq -c | sort -nr
199992 h1_io_cb woken up from src/sock.c:797
51764 h1_io_cb woken up from src/mux_h1.c:3634
65 h1_io_cb woken up from src/connection.c:169
45 h1_io_cb woken up from src/sock.c:777
This patch splits current dns.c into two files:
The first dns.c contains code related to DNS message exchange over UDP
and in future other TCP. We try to remove depencies to resolving
to make it usable by other stuff as DNS load balancing.
The new resolvers.c inherit of the code specific to the actual
resolvers.
Note:
It was really difficult to obtain a clean diff dur to the amount
of moved code.
Note2:
Counters and stuff related to stats is not cleany separated because
currently counters for both layers are merged and hard to separate
for now.
In patch 3bad3d5 ("BUILD: Makefile: exclude broken tests by default"),
the default setting of the REGTESTST_TYPE variable was set in the
Makefile instead of the run-regtests.sh script.
Doing it in the Makefile was breaking the use of this environment
varible with make ( REGTESTS_TYPES=slow,default make reg-tests )
This patch move the default setting from the Makefile to
run-regtests.sh. It also change the documentation in `make
reg-tests-help` about the default value.
This patch should be backported where 3bad3d5 is backported.
When V=1 is used in conjuction with help, the output becomes pretty
difficult to read properly.
$ make TARGET=linux-glibc V=1 help
..
DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
echo; \
if [ -n "" ]; then \
if [ -n "" ]; then \
echo "Current TARGET: "; \
else \
echo "Current TARGET: (custom target)"; \
fi; \
else \
echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
echo " custom"; \
fi
TARGET not set, you may pass 'TARGET=xxx' to set one among :
linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,
osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,
custom
echo;echo "Enabled features for TARGET '' (disable with 'USE_xxx=') :"
Enabled features for TARGET '' (disable with 'USE_xxx=') :
set -- POLL ; echo " $*" | (fmt || cat) 2>/dev/null
POLL
echo;echo "Disabled features for TARGET '' (enable with 'USE_xxx=1') :"
Disabled features for TARGET '' (enable with 'USE_xxx=1') :
set -- EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE THREAD PTHREAD_PSHARED BACKTRACE STATIC_PCRE STATIC_PCRE2 TPROXY LINUX_TPROXY LINUX_SPLICE LIBCRYPT CRYPT_H GETADDRINFO OPENSSL LUA FUTEX ACCEPT4 CLOSEFROM ZLIB SLZ CPU_AFFINITY TFO NS DL RT DEVICEATLAS 51DEGREES WURFL SYSTEMD OBSOLETE_LINKER PRCTL THREAD_DUMP EVPORTS OT QUIC; echo " $*" | (fmt || cat) 2>/dev/null
EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE
This commit ensure the help target always discard line echoing
regardless of V variable as done for reg-tests-help target.
This is from the output of codespell. It's done at once over a bunch
of files and only affects comments, so there is nothing user-visible.
No backport needed.
it could be sometimes a bit confusing to have tests which are known to
be broken executed in the default `make reg-tests` command, especially
for not frequent contributors which are not necessarily aware of all our
quirks.
without this patch, this test is failing on my side:
# top TEST reg-tests/seamless-reload/abns_socket.vtc FAILED (2.228) exit=2
1 tests failed, 0 tests skipped, 107 tests passed
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Rephrase the message to no longer talk about something that "is no longer
supported", but about what actually *is* supported.
Adjustments include:
- Removal of rare targets to make it easier to find the proper one.
- Reformatting to be easier to read (more newlines)
- Explanation of common non-default feature flags.
This reverts commit 5e8c35da1b.
While the issue is being discussed with gcc folks, a reasonable workaround
could be found for the tls_keys_ref list usage which doesn't significantly
complicate the code. Since it was the only place triggering the warning and
I don't feel very comfortable leaving this one disabled for too long, let's
re-enable it right now. This definitely closes issue #1010.
Ilya reported in issue #1010 that gcc 11 (still in development phase 3)
sees out-of-bounds accesses to tlskeys_reference. After a deep analysis
it turns out that the warning is erroneous and Tim could set up a
reproducer that was further simplified to file a gcc bug report (98503).
In order not to break builds on this version, let's temporarily disable
the warning, since no acceptable workaround could be defined. Once gcc
gets it right, the warning should be re-enabled as it is likely to catch
real errors (it's the first false positive here for us even though
roughly one hundred issues were reported around this one alone).
This way we make all xxhash functions inline, with implementations being
directly included within xxhash.h.
Makefile is updated as well, since we don't need to compile and link
xxhash.o anymore.
Inlining should improve performance on small data inputs.
This commit adds the OpenTracing filter (hereinafter we will use the
abbreviated name 'the OT filter') to the contrib tree.
The OT filter adds native support for using distributed tracing in HAProxy.
This is enabled by sending an OpenTracing compliant request to one of the
supported tracers; such as Datadog, Jaeger, Lightstep and Zipkin tracers.
Please note: tracers are not listed by any preference, but alphabetically.
The OT filter is a standard HAProxy filter, so what applies to others also
applies to this one (of course, by that I mean what is described in the
documentation, more precisely in the doc/internals/filters.txt file).
The OT filter activation is done explicitly by specifying it in the HAProxy
configuration. If this is not done, the OT filter in no way participates
in the work of HAProxy.
As for the impact on HAProxy speed, this is documented with several tests
located in the test directory, and the result is found in the README-speed-*
files. In short, the speed of operation depends on the way it is used and
the complexity of the configuration, from an almost immeasurable impact to
a significant deceleration (5x and more). I think that in some normal use
the speed of HAProxy with the filter on will be quite satisfactory with a
slowdown of less than 4%.
The OT filter allows intensive use of ACLs, which can be defined anywhere in
the configuration. Thus, it is possible to use the filter only for those
connections that are of interest to us.
More detailed documentation related to the operation, configuration and use
of the filter can be found in the contrib/opentracing directory.
To make the OpenTracing filter easier to configure and compile, several
entries have been added to the Makefile. When running the make utility,
it is possible to use several new arguments:
USE_OT=1 : enable the OpenTracing filter
OT_DEBUG=1 : compile the OpenTracing filter in debug mode
OT_INC=path : force the include path to libopentracing-c-wrapper
OT_LIB=path : force the lib path to libopentracing-c-wrapper
OT_RUNPATH=1 : add libopentracing-c-wrapper RUNPATH to haproxy executable
If USE_OT is set, then an additional Makefile from the contrib/opentracing
directory is included in the compilation process.
Now that we sometimes link some contrib subparts directly into the
haproxy binary, it's becoming a real problem that they're not cleaned
on make clean. Some of the tools there are useful as .so or pure
binaries and we don't want to remove them, but anything intermediary
susceptible to be linked into haproxy should be clenaed. This is what
this patch does for 3 levels of subdirs into contrib/, without touching
the rest. It should be sufficient for the vast majority of use cases.
Allow OpenBSD to support encrypted passwords in Userlists.
OpenBSD's crypt(3) function is provided directly by libc and does not
require -lcrypt.
Signed-off-by: Matthieu Guegan <matthieu.guegan@deindeal.ch>
This patch implements a couple of converters to validate and extract data from a
MQTT (Message Queuing Telemetry Transport) message. The validation consists of a
few checks as well as "packet size" validation. The extraction can get any field
from the variable header and the payload.
This is limited to CONNECT and CONNACK packet types only. All other messages are
considered as invalid. It is not a problem for now because only the first packet
on each side can be parsed (CONNECT for the client and CONNACK for the server).
MQTT 3.1.1 and 5.0 are supported.
Reviewed and Fixed by Christopher Faulet <cfaulet@haproxy.com>
This patch implements a couple of converters to validate and extract tag value
from a FIX (Financial Information eXchange) message. The validation consists in
a few checks such as mandatory fields and checksum computation. The extraction
can get any tag value based on a tag string or tag id.
This patch requires the istend() function. Thus it depends on "MINOR: ist: Add
istend() function to return a pointer to the end of the string".
Reviewed and Fixed by Christopher Faulet <cfaulet@haproxy.com>
