This patch adds a counter of calls on the orchestator peers task
and a counter on the tasks linked to applet i/o handler for
each peer.
Those two counters are useful to detect if a peer sync is active
or frozen.
This patch is related to the commit:
"MINOR: peers: Add a new command to the CLI for peers."
and should be backported with it.
It's always a pain to get a core dump when enabling user/group setting
(which disables the dumpable flag on Linux), when using a chroot and/or
when haproxy is started by a service management tool which requires
complex operations to just raise the core dump limit.
This patch introduces a new "set-dumpable" global directive to work
around these troubles by doing the following :
- remove file size limits (equivalent of ulimit -f unlimited)
- remove core size limits (equivalent of ulimit -c unlimited)
- mark the process dumpable again (equivalent of suid_dumpable=1)
Some of these will depend on the operating system. This way it becomes
much easier to retrieve a core file. Temporarily moving the chroot to
a user-writable place generally enough.
The legacy HTTP mode is no more the default one. So now, by default, without any
option in your configuration, all proxies will use the HTX mode. The line
"option http-use-htx" in proxy sections are now useless, except to cancel the
legacy HTTP mode. To fallback on legacy HTTP mode, you should use the line "no
option http-use-htx" explicitly.
Note that the reg-tests still work by default on legacy HTTP mode. The HTX will
be enabled by default in a futur commit.
The option http-tunnel disables any HTTP processing past the first
transaction. In HTX, it works for full h1 transactions. As for the legacy HTTP,
it is a workaround, but it works. But it is impossible to make it works with an
h2 connection. In such case, it has no effect, the stream is closed at the end
of the transaction. So to avoid any inconsistancies between h1 and h2
connections, this option is now always ignored when the HTX is enabled. It is
also a good opportinity to deprecate an old and ugly option. A warning is
emitted during HAProxy startup to encourage users to remove this option.
Note that in legacy HTTP, this option only works with full h1 transactions
too. If an h2 connection is established on a frontend with this option enabled,
it will have no effect at all. But we keep it for the legacy HTTP for
compatibility purpose. It will be removed with the legacy HTTP.
So to be short, if you have to really (REALLY) use it, it will only work for
legacy HTTP frontends with H1 clients.
The documentation has been updated accordingly.
This patch must be backported to 1.9. It is not strictly speaking required but
it will ease futur backports.
The converter can be used to decrypt the raw byte input using the
AES-GCM algorithm, using provided nonce, key and AEAD tag. This can
be useful to decrypt encrypted cookies for example and make decisions
based on the content.
Released version 2.0-dev2 with the following main changes :
- CLEANUP: http: Remove unreachable code in parse_http_req_capture
- CLEANUP: stream: Remove bogus loop in conn_si_send_proxy
- MINOR: lists: Implement locked variations.
- MEDIUM: servers: Used a locked list for idle_orphan_conns.
- MEDIUM: servers: Reorganize the way idle connections are cleaned.
- BUG/MEDIUM: lists: Properly handle the case we're removing the first elt.
- MINOR: cfgparse: Add a cast to make gcc happier.
- BUG/MEDIUM: standard: Wrong reallocation size.
- BUG/MINOR: listener: keep accept rate counters accurate under saturation
- DOC: fix alphabetic ordering for "tune.fail-alloc" setting
- MAJOR: config: disable support for nbproc and nbthread in parallel
- MEDIUM: listener: keep a single thread-mask and warn on "process" misuse
- MAJOR: listener: do not hold the listener lock in listener_accept()
- MINOR: listener: maintain a per-thread count of the number of connections on a listener
- MINOR: tools: implement functions to look up the nth bit set in a mask
- MINOR: listener: pre-compute some thread counts per bind_conf
- MINOR: listener: implement multi-queue accept for threads
- MAJOR: listener: use the multi-queue for multi-thread listeners
- MINOR: activity: add accept queue counters for pushed and overflows
- MINOR: config: add global tune.listener.multi-queue setting
- MAJOR: threads: enable one thread per CPU by default
- DOC: update management.txt to reflect that threads are used by default
- BUG/MINOR: config: don't over-count the global maxsock value
- BUG/MEDIUM: list: fix the rollback on addq in the locked liss
- BUG/MEDIUM: list: fix LIST_POP_LOCKED's removal of the last pointer
- BUG/MEDIUM: list: add missing store barriers when updating elements and head
- MINOR: list: make the delete and pop operations idempotent
- MINOR: server: remove a few unneeded LIST_INIT calls after LIST_DEL_LOCKED
- BUG/MEDIUM: listener: use a self-locked list for the dequeue lists
- BUG/MEDIUM: listener: make sure the listener never accepts too many conns
- BUG/MEDIUM: list: correct fix for LIST_POP_LOCKED's removal of last element
- MINOR: listener: introduce listener_backlog() to report the backlog value
- MINOR: listener: do not needlessly set l->maxconn
- MINOR: proxy: do not change the listeners' maxconn when updating the frontend's
- MEDIUM: config: don't enforce a low frontend maxconn value anymore
- MINOR: peers: Add a message for heartbeat.
- MINOR: global: keep a copy of the initial rlim_fd_cur and rlim_fd_max values
- BUG/MINOR: init: never lower rlim_fd_max
- BUG/MINOR: checks: make external-checks restore the original rlim_fd_cur/max
- BUG/MINOR: mworker: be careful to restore the original rlim_fd_cur/max on reload
- MINOR: init: make the maxpipe computation more accurate
- MINOR: init: move some maxsock updates earlier
- MEDIUM: init: make the global maxconn default to what rlim_fd_cur permits
- REGTEST: fix a spurious "nbthread 4" in the connection test
- DOC: update the text related to the global maxconn value
- BUG/MAJOR: mux-h2: fix race condition between close on both ends
- MINOR: sample: Replace "req.ungrpc" smp fetch by a "ungrpc" converter.
- BUG/MEDIUM: list: fix again LIST_ADDQ_LOCKED
- MINOR: htx: unconditionally handle parsing errors in requests or responses
- MINOR: mux-h2: always pass HTX_FL_PARSING_ERROR between h2s and buf on RX
- BUG/MEDIUM: h2/htx: verify that :path doesn't contain invalid chars
- MINOR: sample: Code factorization "ungrpc" converter.
- MINOR: sample: Rework gRPC converter code.
- CLEANUP: wurfl: remove dead, broken and unmaintained code
- MINOR: config: relax the range checks on cpu-map
- BUG/MINOR: ssl: fix warning about ssl-min/max-ver support
- MINOR: sample: Extract some protocol buffers specific code.
- DOC: Remove tabs and fixed punctuation.
- MINOR: sample: Add a protocol buffers specific converter.
- REGTEST: Peers reg tests.
- REGTEST: Enable reg tests with HEAD HTTP method usage.
- MINOR: lists: add a LIST_DEL_INIT() macro
- MINOR: task: use LIST_DEL_INIT() to remove a task from the queue
- MINOR: listener: improve incoming traffic distribution
- MINOR: tools: implement my_flsl()
- MEDIUM: listener: change the LB algorithm again to use two round robins instead
- CLEANUP: listener: remove old thread bit mapping
- MINOR: listener: move thr_idx from the bind_conf to the listener
- BUG/MEDIUM: logs: Only attempt to free startup_logs once.
- BUG/MAJOR: config: Wrong maxconn adjustment.
- BUG/MEDIUM: 51d: fix possible segfault on deinit_51degrees()
- OPTIM: task: limit the impact of memory barriers in taks_remove_from_task_list()
- MINOR: fd: Remove debugging code.
- BUG/MEDIUM: listeners: Don't call fd_stop_recv() if fd_updt is NULL.
- MINOR: threads: Implement __ha_barrier_atomic*.
- MEDIUM: threads: Use __ATOMIC_SEQ_CST when using the newer atomic API.
- MINOR: threads: Add macros to do atomic operation with no memory barrier.
- MEDIUM: various: Use __ha_barrier_atomic* when relevant.
- MEDIUM: applets: Use the new _HA_ATOMIC_* macros.
- MEDIUM: xref: Use the new _HA_ATOMIC_* macros.
- MEDIUM: fd: Use the new _HA_ATOMIC_* macros.
- MEDIUM: freq_ctr: Use the new _HA_ATOMIC_* macros.
- MEDIUM: proxy: Use the new _HA_ATOMIC_* macros.
- MEDIUM: server: Use the new _HA_ATOMIC_* macros.
- MEDIUM: task: Use the new _HA_ATOMIC_* macros.
- MEDIUM: activity: Use the new _HA_ATOMIC_* macros.
- MEDIUM: backend: Use the new _HA_ATOMIC_* macros.
- MEDIUM: cache: Use the new _HA_ATOMIC_* macros.
- MEDIUM: checks: Use the new _HA_ATOMIC_* macros.
- MEDIUM: pollers: Use the new _HA_ATOMIC_* macros.
- MEDIUM: compression: Use the new _HA_ATOMIC_* macros.
- MEDIUM: spoe: Use the new _HA_ATOMIC_* macros.
- MEDIUM: threads: Use the new _HA_ATOMIC_* macros.
- MEDIUM: http: Use the new _HA_ATOMIC_* macros.
- MEDIUM: lb/threads: Use the new _HA_ATOMIC_* macros.
- MEDIUM: listeners: Use the new _HA_ATOMIC_* macros.
- MEDIUM: logs: Use the new _HA_ATOMIC_* macros.
- MEDIUM: memory: Use the new _HA_ATOMIC_* macros.
- MEDIUM: peers: Use the new _HA_ATOMIC_* macros.
- MEDIUM: proto_tcp: Use the new _HA_ATOMIC_* macros.
- MEDIUM: queues: Use the new _HA_ATOMIC_* macros.
- MEDIUM: sessions: Use the new _HA_ATOMIC_* macros.
- MEDIUM: ssl: Use the new _HA_ATOMIC_* macros.
- MEDIUM: stream: Use the new _HA_ATOMIC_* macros.
- MEDIUM: tcp_rules: Use the new _HA_ATOMIC_* macros.
- MEDIUM: time: Use the new _HA_ATOMIC_* macros.
- MEDIUM: vars: Use the new _HA_ATOMIC_* macros.
- MINOR: config: remove obsolete use of DEFAULT_MAXCONN at various places
- MINOR: config: continue to rely on DEFAULT_MAXCONN to set the minimum maxconn
- BUG/MEDIUM: list: fix incorrect pointer unlocking in LIST_DEL_LOCKED()
- BUG/MEDIUM: listener: make sure we don't pick stopped threads
- MEDIUM: list: Remove useless barriers.
- MEDIUM: list: Use _HA_ATOMIC_*
- MEDIUM: connections: Use _HA_ATOMIC_*
- BUG/MAJOR: tasks: Use the TASK_GLOBAL flag to know if we're in the global rq.
- BUG/MEDIUM: threads/fd: do not forget to take into account epoll_fd/pipes
- BUG/MEDIUM: init/threads: consider epoll_fd/pipes for automatic maxconn calculation
- BUG/MEDIUM: tasks: Make sure we wake sleeping threads if needed.
- BUG/MINOR: mux-h1: Don't report an error on EOS if no message was received
- BUG/MINOR: stats/htx: Call channel_add_input() when response headers are sent
- BUG/MINOR: lua/htx: Use channel_add_input() when response data are added
- BUG/MINOR: lua/htx: Don't forget to call htx_to_buf() when appropriate
- MINOR: stats: Add the status code STAT_STATUS_IVAL to handle invalid requests
- MINOR: stats: Move stuff about the stats status codes in stats files
- BUG/MINOR: stats: Be more strict on what is a valid request to the stats applet
- Revert "REGTEST: Enable reg tests with HEAD HTTP method usage."
- BUILD: listener: shut up a build warning when threads are disabled
- BUILD: Makefile: allow the reg-tests target to be verbose
- BUILD: Makefile: resolve LEVEL before calling run-regtests
- BUG/MAJOR: spoe: Fix initialization of thread-dependent fields
- BUG/MAJOR: stats: Fix how huge POST data are read from the channel
- BUG/MINOR: http/counters: fix missing increment of fe->srv_aborts
- BUG/MEDIUM: mux-h2: Always wakeup streams with no id to avoid frozen streams
- MINOR: mux-h2: Set REFUSED_STREAM error to reset a stream if no data was never sent
- MINOR: muxes: Report the Last read with a dedicated flag
- MINOR: proto-http/proto-htx: Make error handling clearer during data forwarding
- BUILD: tools: fix a build warning on some 32-bit archs
- MINOR: init: report the list of optionally available services
- MEDIUM: proto_htx: Switch to infinite forwarding if there is no data filter
- BUG/MINOR: cache: Fully consume large requests in the cache applet
- BUG/MINOR: stats: Fully consume large requests in the stats applet
- BUG/MEDIUM: lua: Fully consume large requests when an HTTP applet ends
- MINOR: proto_http: Add function to handle the header "Expect: 100-continue"
- MINOR: proto_htx: Add function to handle the header "Expect: 100-continue"
- MINOR: stats/cache: Handle the header Expect when applets are registered
- MINOR: http/applets: Handle all applets intercepting HTTP requests the same way
- CLEANUP: cache: don't export http_cache_applet anymore
- MINOR: lua: Don't handle the header Expect in lua HTTP applets anymore
- BUG/MINOR: doc: Be accurate on the behavior on pool-purge-delay.
- Revert "MEDIUM: proto_htx: Switch to infinite forwarding if there is no data filter"
- BUG/MEDIUM: mux-h2: Make sure we destroyed the h2s once shutr/shutw is done.
- BUG/MEDIUM: mux-h2: Don't bother keeping the h2s if detaching and nothing to send.
- BUG/MEDIUM: mux-h2: Use the right list in h2_stop_senders().
- MINOR: mux-h2: copy small data blocks more often and reduce the number of pauses
- CLEANUP: mux-h2: add some comments to help understand the code
- BUG/MEDIUM: ssl: ability to set TLS 1.3 ciphers using ssl-default-server-ciphersuites
- BUG/MINOR: log: properly format IPv6 address when LOG_OPT_HEXA modifier is used.
- BUG/MEDIUM: h2: Try to be fair when sending data.
- BUG/MINOR: proto-http: Don't forward request body anymore on error
- MINOR: mux-h2: Remove useless test on ES flag in h2_frt_transfer_data()
- MINOR: connection: and new flag to mark end of input (EOI)
- MINOR: channel: Report EOI on the input channel if it was reached in the mux
- MEDIUM: mux-h2: Don't mix the end of the message with the end of stream
- MINOR: mux-h1: Set CS_FL_EOI the end of the message is reached
- BUG/MEDIUM: http/htx: Fix handling of the option abortonclose
- CLEANUP: muxes/stream-int: Remove flags CS_FL_READ_NULL and SI_FL_READ_NULL
- MEDIUM: proto_htx: Reintroduce the infinite forwarding on data
- BUG/MEDIUM: h2: only destroy the h2s if h2s->cs is NULL.
- BUG/MEDIUM: h2: Use the new sending_list in h2s_notify_send().
- BUG/MEDIUM: h2: Follow the same logic in h2_deferred_shut than in h2_snd_buf.
- BUG/MEDIUM: h2: Remove the tasklet from the task list if unsubscribing.
- BUG/MEDIUM: task/h2: add an idempotent task removal fucntion
- CLEANUP: task: only perform a LIST_DEL() when the list is not empty
- BUG/MEDIUM: mux-h2: make sure to always notify streams of EOS condition
- CONTRIB: debug: report the CS and CF's EOI flags
- MINOR: channel: don't unset CF_SHUTR_NOW after shutting down.
This patch adds "protobuf" protocol buffers specific converter wich
may used in combination with "ungrpc" as first converter to extract
a protocol buffers field value. It is simply implemented reusing
protobuf_field_lookup() which is the protocol buffers specific parser already
used by "ungrpc" converter which only parse a gRPC header in addition of
parsing protocol buffers message.
Update the documentation for this new "protobuf" converter.
Since the "wurfl" device detection engine was merged slightly more than
two years ago (2016-11-04), it never received a single fix nor update.
For almost two years it didn't receive even the minimal review or changes
needed to be compatible with threads, and it's remained build-broken for
about the last 9 months, consecutive to the last buffer API changes,
without anyone ever noticing! When asked on the list, nobody confirmed
using it :
https://www.mail-archive.com/haproxy@formilux.org/msg32516.html
And obviously nobody even cared to verify that it did still build. So we
are left with this broken code with no user and no maintainer. It might
even suffer from remotely exploitable vulnerabilities without anyone
being able to check if it presents any risk. It's a pain to update each
time there is an API change because it doesn't build as it depends on
external libraries that are not publicly accessible, leading to careful
blind changes. It slows down the whole project. This situation is not
acceptable at all.
It's time to cure the problem where it is. This patch removes all this
dead, non-buildable, non-working code. If anyone ever decides to use it,
which I seriously doubt based on history, it could be reintegrated, but
this time the following guarantees will be required :
- someone has to step up as a maintainer and have his name listed in
the MAINTAINERS file (I should have been more careful last time).
This person will take the sole blame for all issues and will be
responsible for fixing the bugs and incompatibilities affecting
this code, and for making it evolve to follow regular internal API
updates.
- support building on a standard distro with automated tools (i.e. no
more "click on this site, register your e-mail and download an
archive then figure how to place this into your build system").
Dummy libs are OK though as long as they allow the mainline code to
build and start.
- multi-threaded support must be fixed. I mean seriously, not worked
around with a check saying "please disable threads, we've been busy
fishing for the last two years".
This may be backported to 1.9 given that the code has never worked there
either, thus at least we're certain nobody will miss it.
For now on, "ungrpc" may take a second optional argument to provide
the protocol buffers types used to encode the field value to be extracted.
When absent the field value is extracted as a binary sample which may then
followed by others converters like "hex" which takes binary as input sample.
When this second argument is a type which does not match the one found by "ungrpc",
this field is considered as not found even if present.
With this patch we also remove the useless "varint" and "svarint" converters.
Update the documentation about "ungrpc" converters.
This patch simply extracts the code of smp_fetch_req_ungrpc() for "req.ungrpc"
from http_fetch.c to move it to sample.c with very few modifications.
Furthermore smp_fetch_body_buf() used to fetch the body contents is no more needed.
Update the documentation for gRPC.
Historically the default frontend's maxconn used to be quite low (2000),
which was sufficient two decades ago but often proved to be a problem
when users had purposely set the global maxconn value but forgot to set
the frontend's.
There is no point in keeping this arbitrary limit for frontends : when
the global maxconn is lower, it's already too high and when the global
maxconn is much higher, it becomes a limiting factor which causes trouble
in production.
This commit allows the value to be set to zero, which becomes the new
default value, to mean it's not directly limited, or in fact it's set
to the global maxconn. Since this operation used to be performed before
computing a possibly automatic global maxconn based on memory limits,
the calculation of the maxconn value and its propagation to the backends'
fullconn has now moved to a dedicated function, proxy_adjust_all_maxconn(),
which is called once the global maxconn is stabilized.
This comes with two benefits :
1) a configuration missing "maxconn" in the defaults section will not
limit itself to a magically hardcoded value but will scale up to the
global maxconn ;
2) when the global maxconn is not set and memory limits are used instead,
the frontends' maxconn automatically adapts, and the backends' fullconn
as well.
In an attempt to try to provide automatic maxconn settings, we need to
decorrelate a listner's backlog and maxconn so that these values can be
independent. This introduces a listener_backlog() function which retrieves
the backlog value from the listener's backlog, the frontend's, the
listener's maxconn, the frontend's or falls back to 1024. This
corresponds to what was done in cfgparse.c to force a value there except
the last fallback which was not set since the frontend's maxconn is always
known.
Threads have long matured by now, still for most users their usage is
not trivial. It's about time to enable them by default on platforms
where we know the number of CPUs bound. This patch does this, it counts
the number of CPUs the process is bound to upon startup, and enables as
many threads by default. Of course, "nbthread" still overrides this, but
if it's not set the default behaviour is to start one thread per CPU.
The default number of threads is reported in "haproxy -vv". Simply using
"taskset -c" is now enough to adjust this number of threads so that there
is no more need for playing with cpu-map. And thanks to the previous
patches on the listener, the vast majority of configurations will not
need to duplicate "bind" lines with the "process x/y" statement anymore
either, so a simple config will automatically adapt to the number of
processors available.
tune.listener.multi-queue { on | off }
Enables ('on') or disables ('off') the listener's multi-queue accept which
spreads the incoming traffic to all threads a "bind" line is allowed to run
on instead of taking them for itself. This provides a smoother traffic
distribution and scales much better, especially in environments where threads
may be unevenly loaded due to external activity (network interrupts colliding
with one thread for example). This option is enabled by default, but it may
be forcefully disabled for troubleshooting or for situations where it is
estimated that the operating system already provides a good enough
distribution and connections are extremely short-lived.
Now that nbproc and nbthread are exclusive, we can still provide more
detailed explanations about what we've found in the config when a bind
line appears on multiple threads and processes at the same time, then
ignore the setting.
This patch reduces the listener's thread mask to a single mask instead
of an array of masks per process. Now we have only one thread mask and
one process mask per bind-conf. This removes ~504 bytes of RAM per
bind-conf and will simplify handling of thread masks.
If a "bind" line only refers to process numbers not found by its parent
frontend or not covered by the global nbproc directive, or to a thread
not covered by the global nbthread directive, a warning is emitted saying
what will be used instead.
When 1.8 was released, we wanted to support both nbthread and nbproc to
observe how things would go. Since then it appeared obvious that the two
are never used together because of the pain to configure affinity in this
case, and instead of bringing benefits, it brings the limitations of both
models, and causes multiple threads to compete for the same CPU. In
addition, it costs a lot to support both in parallel, so let's get rid
of this once for all.
Last time I verified, the "f" letter was not between the "l" and the
"m", but between the "e" and the "g", so let's move this entry to the
right place.
Released version 2.0-dev1 with the following main changes :
- MINOR: mux-h2: only increase the connection window with the first update
- REGTESTS: remove the expected window updates from H2 handshakes
- BUG/MINOR: mux-h2: make empty HEADERS frame return a connection error
- BUG/MEDIUM: mux-h2: mark that we have too many CS once we have more than the max
- MEDIUM: mux-h2: remove padlen during headers phase
- MINOR: h2: add a bit-based frame type representation
- MINOR: mux-h2: remove useless check for empty frame length in h2s_decode_headers()
- MEDIUM: mux-h2: decode HEADERS frames before allocating the stream
- MINOR: mux-h2: make h2c_send_rst_stream() use the dummy stream's error code
- MINOR: mux-h2: add a new dummy stream for the REFUSED_STREAM error code
- MINOR: mux-h2: fail stream creation more cleanly using RST_STREAM
- MINOR: buffers: add a new b_move() function
- MINOR: mux-h2: make h2_peek_frame_hdr() support an offset
- MEDIUM: mux-h2: handle decoding of CONTINUATION frames
- CLEANUP: mux-h2: remove misleading comments about CONTINUATION
- BUG/MEDIUM: servers: Don't try to reuse connection if we switched server.
- BUG/MEDIUM: tasks: Decrement tasks_run_queue in tasklet_free().
- BUG/MINOR: htx: send the proper authenticate header when using http-request auth
- BUG/MEDIUM: mux_h2: Don't add to the idle list if we're full.
- BUG/MEDIUM: servers: Fail if we fail to allocate a conn_stream.
- BUG/MAJOR: servers: Use the list api correctly to avoid crashes.
- BUG/MAJOR: servers: Correctly use LIST_ELEM().
- BUG/MAJOR: sessions: Use an unlimited number of servers for the conn list.
- BUG/MEDIUM: servers: Flag the stream_interface on handshake error.
- MEDIUM: servers: Be smarter when switching connections.
- MEDIUM: sessions: Keep track of which connections are idle.
- MINOR: payload: add sample fetch for TLS ALPN
- BUG/MEDIUM: log: don't mark log FDs as non-blocking on terminals
- MINOR: channel: Add the function channel_add_input
- MINOR: stats/htx: Call channel_add_input instead of updating channel state by hand
- BUG/MEDIUM: cache: Be sure to end the forwarding when XFER length is unknown
- BUG/MAJOR: htx: Return the good block address after a defrag
- MINOR: lb: allow redispatch when using consistent hash
- CLEANUP: mux-h2: fix end-of-stream flag name when processing headers
- BUG/MEDIUM: mux-h2: always restart reading if data are available
- BUG/MINOR: mux-h2: set the stream-full flag when leaving h2c_decode_headers()
- BUG/MINOR: mux-h2: don't check the CS count in h2c_bck_handle_headers()
- BUG/MINOR: mux-h2: mark end-of-stream after processing response HEADERS, not before
- BUG/MINOR: mux-h2: only update rxbuf's length for H1 headers
- BUG/MEDIUM: mux-h1: use per-direction flags to indicate transitions
- BUG/MEDIUM: mux-h1: make HTX chunking consistent with H2
- BUG/MAJOR: stream-int: Update the stream expiration date in stream_int_notify()
- BUG/MEDIUM: proto-htx: Set SI_FL_NOHALF on server side when request is done
- BUG/MEDIUM: mux-h1: Add a task to handle connection timeouts
- MINOR: mux-h2: make h2c_decode_headers() return a status, not a count
- MINOR: mux-h2: add a new dummy stream : h2_error_stream
- MEDIUM: mux-h2: make h2c_decode_headers() support recoverable errors
- BUG/MINOR: mux-h2: detect when the HTX EOM block cannot be added after headers
- MINOR: mux-h2: remove a misleading and impossible test
- CLEANUP: mux-h2: clean the stream error path on HEADERS frame processing
- MINOR: mux-h2: check for too many streams only for idle streams
- MINOR: mux-h2: set H2_SF_HEADERS_RCVD when a HEADERS frame was decoded
- BUG/MEDIUM: mux-h2: decode trailers in HEADERS frames
- MINOR: h2: add h2_make_h1_trailers to turn H2 headers to H1 trailers
- MEDIUM: mux-h2: pass trailers to H1 (legacy mode)
- MINOR: htx: add a new function to add a block without filling it
- MINOR: h2: add h2_make_htx_trailers to turn H2 headers to HTX trailers
- MEDIUM: mux-h2: pass trailers to HTX
- MINOR: mux-h1: parse the content-length header on output and set H1_MF_CLEN
- BUG/MEDIUM: mux-h1: don't enforce chunked encoding on requests
- MINOR: mux-h2: make HTX_BLK_EOM processing idempotent
- MINOR: h1: make the H1 headers block parser able to parse headers only
- MEDIUM: mux-h2: emit HEADERS frames when facing HTX trailers blocks
- MINOR: stream/htx: Add info about the HTX structs in "show sess all" command
- MINOR: stream: Add the subscription events of SIs in "show sess all" command
- MINOR: mux-h1: Add the subscription events in "show fd" command
- BUG/MEDIUM: h1: Get the h1m state when restarting the headers parsing
- BUG/MINOR: cache/htx: Be sure to count partial trailers
- BUG/MEDIUM: h1: In h1_init(), wake the tasklet instead of calling h1_recv().
- BUG/MEDIUM: server: Defer the mux init until after xprt has been initialized.
- MINOR: connections: Remove a stall comment.
- BUG/MEDIUM: cli: make "show sess" really thread-safe
- BUILD: add a new file "version.c" to carry version updates
- MINOR: stream/htx: add the HTX flags output in "show sess all"
- MINOR: stream/cli: fix the location of the waiting flag in "show sess all"
- MINOR: stream/cli: report more info about the HTTP messages on "show sess all"
- BUG/MINOR: lua: bad args are returned for Lua actions
- BUG/MEDIUM: lua: dead lock when Lua tasks are trigerred
- MINOR: htx: Add an helper function to get the max space usable for a block
- MINOR: channel/htx: Add HTX version for some helper functions
- BUG/MEDIUM: cache/htx: Respect the reserve when cached objects are served
- BUG/MINOR: stats/htx: Respect the reserve when the stats page is dumped
- DOC: regtest: make it clearer what the purpose of the "broken" series is
- REGTEST: mailers: add new test for 'mailers' section
- REGTEST: Add a reg test for health-checks over SSL/TLS.
- BUG/MINOR: mux-h1: Close connection on shutr only when shutw was really done
- MEDIUM: mux-h1: Clarify how shutr/shutw are handled
- BUG/MINOR: compression: Disable it if another one is already in progress
- BUG/MINOR: filters: Detect cache+compression config on legacy HTTP streams
- BUG/MINOR: cache: Disable the cache if any compression filter precedes it
- REGTEST: Add some informatoin to test results.
- MINOR: htx: Add a function to truncate all blocks after a specific offset
- MINOR: channel/htx: Add the HTX version of channel_truncate/erase
- BUG/MINOR: proto_htx: Use HTX versions to truncate or erase a buffer
- BUG/CRITICAL: mux-h2: re-check the frame length when PRIORITY is used
- DOC: Fix typo in req.ssl_alpn example (commit 4afdd138424ab...)
- DOC: http-request cache-use / http-response cache-store expects cache name
- REGTEST: "capture (request|response)" regtest.
- BUG/MINOR: lua/htx: Respect the reserve when data are send from an HTX applet
- REGTEST: filters: add compression test
- BUG/MEDIUM: init: Initialize idle_orphan_conns for first server in server-template
- BUG/MEDIUM: ssl: Disable anti-replay protection and set max data with 0RTT.
- DOC: Be a bit more explicit about allow-0rtt security implications.
- MINOR: mux-h1: make the mux_h1_ops struct static
- BUILD: makefile: add an EXTRA_OBJS variable to help build optional code
- BUG/MEDIUM: connection: properly unregister the mux on failed initialization
- BUG/MAJOR: cache: fix confusion between zero and uninitialized cache key
- REGTESTS: test case for map_regm commit 271022150d
- REGTESTS: Basic tests for concat,strcmp,word,field,ipmask converters
- REGTESTS: Basic tests for using maps to redirect requests / select backend
- DOC: REGTESTS README varnishtest -Dno-htx= define.
- MINOR: spoe: Make the SPOE filter compatible with HTX proxies
- MINOR: checks: Store the proxy in checks.
- BUG/MEDIUM: checks: Avoid having an associated server for email checks.
- REGTEST: Switch to vtest.
- REGTEST: Adapt reg test doc files to vtest.
- BUG/MEDIUM: h1: Make sure we destroy an inactive connectin that did shutw.
- BUG/MINOR: base64: dec func ignores padding for output size checking
- BUG/MEDIUM: ssl: missing allocation failure checks loading tls key file
- MINOR: ssl: add support of aes256 bits ticket keys on file and cli.
- BUG/MINOR: backend: don't use url_param_name as a hint for BE_LB_ALGO_PH
- BUG/MINOR: backend: balance uri specific options were lost across defaults
- BUG/MINOR: backend: BE_LB_LKUP_CHTREE is a value, not a bit
- MINOR: backend: move url_param_name/len to lbprm.arg_str/len
- MINOR: backend: make headers and RDP cookie also use arg_str/len
- MINOR: backend: add new fields in lbprm to store more LB options
- MINOR: backend: make the header hash use arg_opt1 for use_domain_only
- MINOR: backend: remap the balance uri settings to lbprm.arg_opt{1,2,3}
- MINOR: backend: move hash_balance_factor out of chash
- MEDIUM: backend: move all LB algo parameters into an union
- MINOR: backend: make the random algorithm support a number of draws
- BUILD/MEDIUM: da: Necessary code changes for new buffer API.
- BUG/MINOR: stick_table: Prevent conn_cur from underflowing
- BUG: 51d: Changes to the buffer API in 1.9 were not applied to the 51Degrees code.
- BUG/MEDIUM: stats: Get the right scope pointer depending on HTX is used or not
- DOC: add a missing space in the documentation for bc_http_major
- REGTEST: checks basic stats webpage functionality
- BUG/MEDIUM: servers: Make assign_tproxy_address work when ALPN is set.
- BUG/MEDIUM: connections: Add the CO_FL_CONNECTED flag if a send succeeded.
- DOC: add github issue templates
- MINOR: cfgparse: Extract some code to be re-used.
- CLEANUP: cfgparse: Return asap from cfg_parse_peers().
- CLEANUP: cfgparse: Code reindentation.
- MINOR: cfgparse: Useless frontend initialization in "peers" sections.
- MINOR: cfgparse: Rework peers frontend init.
- MINOR: cfgparse: Simplication.
- MINOR: cfgparse: Make "peer" lines be parsed as "server" lines.
- MINOR: peers: Make outgoing connection to SSL/TLS peers work.
- MINOR: cfgparse: SSL/TLS binding in "peers" sections.
- DOC: peers: SSL/TLS documentation for "peers"
- BUG/MINOR: startup: certain goto paths in init_pollers fail to free
- BUG/MEDIUM: checks: fix recent regression on agent-check making it crash
- BUG/MINOR: server: don't always trust srv_check_health when loading a server state
- BUG/MINOR: check: Wake the check task if the check is finished in wake_srv_chk()
- BUG/MEDIUM: ssl: Fix handling of TLS 1.3 KeyUpdate messages
- DOC: mention the effect of nf_conntrack_tcp_loose on src/dst
- BUG/MINOR: proto-htx: Return an error if all headers cannot be received at once
- BUG/MEDIUM: mux-h2/htx: Respect the channel's reserve
- BUG/MINOR: mux-h1: Apply the reserve on the channel's buffer only
- BUG/MINOR: mux-h1: avoid copying output over itself in zero-copy
- BUG/MAJOR: mux-h2: don't destroy the stream on failed allocation in h2_snd_buf()
- BUG/MEDIUM: backend: also remove from idle list muxes that have no more room
- BUG/MEDIUM: mux-h2: properly abort on trailers decoding errors
- MINOR: h2: declare new sets of frame types
- BUG/MINOR: mux-h2: CONTINUATION in closed state must always return GOAWAY
- BUG/MINOR: mux-h2: headers-type frames in HREM are always a connection error
- BUG/MINOR: mux-h2: make it possible to set the error code on an already closed stream
- BUG/MINOR: hpack: return a compression error on invalid table size updates
- MINOR: server: make sure pool-max-conn is >= -1
- BUG/MINOR: stream: take care of synchronous errors when trying to send
- CLEANUP: server: fix indentation mess on idle connections
- BUG/MINOR: mux-h2: always check the stream ID limit in h2_avail_streams()
- BUG/MINOR: mux-h2: refuse to allocate a stream with too high an ID
- BUG/MEDIUM: backend: never try to attach to a mux having no more stream available
- MINOR: server: add a max-reuse parameter
- MINOR: mux-h2: always consider a server's max-reuse parameter
- MEDIUM: stream-int: always mark pending outgoing SI_ST_CON
- MINOR: stream: don't wait before retrying after a failed connection reuse
- MEDIUM: h2: always parse and deduplicate the content-length header
- BUG/MINOR: mux-h2: always compare content-length to the sum of DATA frames
- CLEANUP: h2: Remove debug printf in mux_h2.c
- MINOR: cfgparse: make the process/thread parser support a maximum value
- MINOR: threads: make MAX_THREADS configurable at build time
- DOC: nbthread is no longer experimental.
- BUG/MINOR: listener: always fill the source address for accepted socketpairs
- BUG/MINOR: mux-h2: do not report available outgoing streams after GOAWAY
- BUG/MINOR: spoe: corrected fragmentation string size
- BUG/MINOR: task: fix possibly missed event in inter-thread wakeups
- BUG/MEDIUM: servers: Attempt to reuse an unfinished connection on retry.
- BUG/MEDIUM: backend: always call si_detach_endpoint() on async connection failure
- SCRIPTS: add the issue tracker URL to the announce script
- MINOR: peers: Extract some code to be reused.
- CLEANUP: peers: Indentation fixes.
- MINOR: peers: send code factorization.
- MINOR: peers: Add new functions to send code and reduce the I/O handler.
- MEDIUM: peers: synchronizaiton code factorization to reduce the size of the I/O handler.
- MINOR: peers: Move update receive code to reduce the size of the I/O handler.
- MINOR: peers: Move ack, switch and definition receive code to reduce the size of the I/O handler.
- MINOR: peers: Move high level receive code to reduce the size of I/O handler.
- CLEANUP: peers: Be more generic.
- MINOR: peers: move error handling to reduce the size of the I/O handler.
- MINOR: peers: move messages treatment code to reduce the size of the I/O handler.
- MINOR: peers: move send code to reduce the size of the I/O handler.
- CLEANUP: peers: Remove useless statements.
- MINOR: peers: move "hello" message treatment code to reduce the size of the I/O handler.
- MINOR: peers: move peer initializations code to reduce the size of the I/O handler.
- CLEANUP: peers: factor the error handling code in peer_treet_updatemsg()
- CLEANUP: peers: factor error handling in peer_treat_definedmsg()
- BUILD/MINOR: peers: shut up a build warning introduced during last cleanup
- BUG/MEDIUM: mux-h2: only close connection on request frames on closed streams
- CLEANUP: mux-h2: remove two useless but misleading assignments
- BUG/MEDIUM: checks: Check that conn_install_mux succeeded.
- BUG/MEDIUM: servers: Only destroy a conn_stream we just allocated.
- BUG/MEDIUM: servers: Don't add an incomplete conn to the server idle list.
- BUG/MEDIUM: checks: Don't try to set ALPN if connection failed.
- BUG/MEDIUM: h2: In h2_send(), stop the loop if we failed to alloc a buf.
- BUG/MEDIUM: peers: Handle mux creation failure.
- BUG/MEDIUM: servers: Close the connection if we failed to install the mux.
- BUG/MEDIUM: compression: Rewrite strong ETags
- BUG/MINOR: deinit: tcp_rep.inspect_rules not deinit, add to deinit
- CLEANUP: mux-h2: remove misleading leftover test on h2s' nullity
- BUG/MEDIUM: mux-h2: wake up flow-controlled streams on initial window update
- BUG/MEDIUM: mux-h2: fix two half-closed to closed transitions
- BUG/MEDIUM: mux-h2: make sure never to send GOAWAY on too old streams
- BUG/MEDIUM: mux-h2: do not abort HEADERS frame before decoding them
- BUG/MINOR: mux-h2: make sure response HEADERS are not received in other states than OPEN and HLOC
- MINOR: h2: add a generic frame checker
- MEDIUM: mux-h2: check the frame validity before considering the stream state
- CLEANUP: mux-h2: remove stream ID and frame length checks from the frame parsers
- BUG/MINOR: mux-h2: make sure request trailers on aborted streams don't break the connection
- DOC: compression: Update the reasons for disabled compression
- BUG/MEDIUM: buffer: Make sure b_is_null handles buffers waiting for allocation.
- DOC: htx: make it clear that htxbuf() and htx_from_buf() always return valid pointers
- MINOR: htx: never check for null htx pointer in htx_is_{,not_}empty()
- MINOR: mux-h2: consistently rely on the htx variable to detect the mode
- BUG/MEDIUM: peers: Peer addresses parsing broken.
- BUG/MEDIUM: mux-h1: Don't add "transfer-encoding" if message-body is forbidden
- BUG/MEDIUM: connections: Don't forget to remove CO_FL_SESS_IDLE.
- BUG/MINOR: stream: don't close the front connection when facing a backend error
- BUG/MEDIUM: mux-h2: wait for the mux buffer to be empty before closing the connection
- MINOR: stream-int: add a new flag to mention that we want the connection to be killed
- MINOR: connstream: have a new flag CS_FL_KILL_CONN to kill a connection
- BUG/MEDIUM: mux-h2: do not close the connection on aborted streams
- BUG/MINOR: server: fix logic flaw in idle connection list management
- MINOR: mux-h2: max-concurrent-streams should be unsigned
- MINOR: mux-h2: make sure to only check concurrency limit on the frontend
- MINOR: mux-h2: learn and store the peer's advertised MAX_CONCURRENT_STREAMS setting
- BUG/MEDIUM: mux-h2: properly consider the peer's advertised max-concurrent-streams
- MINOR: xref: Add missing barriers.
- MINOR: muxes: Don't bother to LIST_DEL(&conn->list) before calling conn_free().
- MINOR: debug: Add an option that causes random allocation failures.
- BUG/MEDIUM: backend: always release the previous connection into its own target srv_list
- BUG/MEDIUM: htx: check the HTX compatibility in dynamic use-backend rules
- BUG/MINOR: tune.fail-alloc: Don't forget to initialize ret.
- BUG/MINOR: backend: check srv_conn before dereferencing it
- BUG/MEDIUM: mux-h2: always omit :scheme and :path for the CONNECT method
- BUG/MEDIUM: mux-h2: always set :authority on request output
- BUG/MEDIUM: stream: Don't forget to free s->unique_id in stream_free().
- BUG/MINOR: threads: fix the process range of thread masks
- BUG/MINOR: config: fix bind line thread mask validation
- CLEANUP: threads: fix misleading comment about all_threads_mask
- CLEANUP: threads: use nbits to calculate the thread mask
- OPTIM: listener: optimize cache-line packing for struct listener
- MINOR: tools: improve the popcount() operation
- MINOR: config: keep an all_proc_mask like we have all_threads_mask
- MINOR: global: add proc_mask() and thread_mask()
- MINOR: config: simplify bind_proc processing using proc_mask()
- MINOR: threads: make use of thread_mask() to simplify some thread calculations
- BUG/MINOR: compression: properly report compression stats in HTX mode
- BUG/MINOR: task: close a tiny race in the inter-thread wakeup
- BUG/MAJOR: config: verify that targets of track-sc and stick rules are present
- BUG/MAJOR: spoe: verify that backends used by SPOE cover all their callers' processes
- BUG/MAJOR: htx/backend: Make all tests on HTTP messages compatible with HTX
- BUG/MINOR: config: make sure to count the error on incorrect track-sc/stick rules
- DOC: ssl: Clarify when pre TLSv1.3 cipher can be used
- DOC: ssl: Stop documenting ciphers example to use
- BUG/MINOR: spoe: do not assume agent->rt is valid on exit
- BUG/MINOR: lua: initialize the correct idle conn lists for the SSL sockets
- BUG/MEDIUM: spoe: initialization depending on nbthread must be done last
- BUG/MEDIUM: server: initialize the idle conns list after parsing the config
- BUG/MEDIUM: server: initialize the orphaned conns lists and tasks at the end
- MINOR: config: make MAX_PROCS configurable at build time
- BUG/MAJOR: spoe: Don't try to get agent config during SPOP healthcheck
- BUG/MINOR: config: Reinforce validity check when a process number is parsed
- BUG/MEDIUM: peers: check that p->srv actually exists before using p->srv->use_ssl
- CONTRIB: contrib/prometheus-exporter: Add a Prometheus exporter for HAProxy
- BUG/MINOR: mux-h1: verify the request's version before dropping connection: keep-alive
- BUG: 51d: In Hash Trie, multi header matching was affected by the header names stored globaly.
- MEDIUM: 51d: Enabled multi threaded operation in the 51Degrees module.
- BUG/MAJOR: stream: avoid double free on unique_id
- BUILD/MINOR: stream: avoid a build warning with threads disabled
- BUILD/MINOR: tools: fix build warning in the date conversion functions
- BUILD/MINOR: peers: remove an impossible null test in intencode()
- BUILD/MINOR: htx: fix some potential null-deref warnings with http_find_stline
- BUG/MEDIUM: peers: Missing peer initializations.
- BUG/MEDIUM: http_fetch: fix the "base" and "base32" fetch methods in HTX mode
- BUG/MEDIUM: proto_htx: Fix data size update if end of the cookie is removed
- BUG/MEDIUM: http_fetch: fix "req.body_len" and "req.body_size" fetch methods in HTX mode
- BUILD/MEDIUM: initcall: Fix build on MacOS.
- BUG/MEDIUM: mux-h2/htx: Always set CS flags before exiting h2_rcv_buf()
- MINOR: h2/htx: Set the flag HTX_SL_F_BODYLESS for messages without body
- BUG/MINOR: mux-h1: Add "transfer-encoding" header on outgoing requests if needed
- BUG/MINOR: mux-h2: Don't add ":status" pseudo-header on trailers
- BUG/MINOR: proto-htx: Consider a XFER_LEN message as chunked by default
- BUG/MEDIUM: h2/htx: Correctly handle interim responses when HTX is enabled
- MINOR: mux-h2: Set HTX extra value when possible
- BUG/MEDIUM: htx: count the amount of copied data towards the final count
- MINOR: mux-h2: make the H2 MAX_FRAME_SIZE setting configurable
- BUG/MEDIUM: mux-h2/htx: send an empty DATA frame on empty HTX trailers
- BUG/MEDIUM: servers: Use atomic operations when handling curr_idle_conns.
- BUG/MEDIUM: servers: Add a per-thread counter of idle connections.
- MINOR: fd: add a new my_closefrom() function to close all FDs
- MINOR: checks: use my_closefrom() to close all FDs
- MINOR: fd: implement an optimised my_closefrom() function
- BUG/MINOR: fd: make sure my_closefrom() doesn't miss some FDs
- BUG/MAJOR: fd/threads, task/threads: ensure all spin locks are unlocked
- BUG/MAJOR: listener: Make sure the listener exist before using it.
- MINOR: fd: Use closefrom() as my_closefrom() if supported.
- BUG/MEDIUM: mux-h1: Report the right amount of data xferred in h1_rcv_buf()
- BUG/MINOR: channel: Set CF_WROTE_DATA when outgoing data are skipped
- MINOR: htx: Add function to drain data from an HTX message
- MINOR: channel/htx: Add function to skips output bytes from an HTX channel
- BUG/MAJOR: cache/htx: Set the start-line offset when a cached object is served
- BUG/MEDIUM: cache: Get objects from the cache only for GET and HEAD requests
- BUG/MINOR: cache/htx: Return only the headers of cached objects to HEAD requests
- BUG/MINOR: mux-h1: Always initilize h1m variable in h1_process_input()
- BUG/MEDIUM: proto_htx: Fix functions applying regex filters on HTX messages
- BUG/MEDIUM: h2: advertise to servers that we don't support push
- MINOR: standard: Add a function to parse uints (dotted notation).
- MINOR: arg: Add support for ARGT_PBUF_FNUM arg type.
- MINOR: http_fetch: add "req.ungrpc" sample fetch for gRPC.
- MINOR: sample: Add two sample converters for protocol buffers.
- DOC: sample: Add gRPC related documentation.
This creates a new tunable "tune.h2.max-frame-size" to adjust the
advertised max frame size. When not set it still defaults to the buffer
size. It is convenient to advertise sizes lower than the buffer size,
for example when using very large buffers.
Since TLS ciphers are not well understand, it is very common pratice to
copy and paste parameters from documentation and use them as-is. Since RC4
should not be used anymore, it is wiser to link users to up to date
documnetation from Mozilla to avoid unsafe configuration in the wild.
Clarify the location of man pages for OpenSSL when missing.
When compiling with DEBUG_FAIL_ALLOC, add a new option, tune.fail-alloc,
that gives the percentage of chances an allocation fails.
This is useful to check that allocation failures are always handled
gracefully.
- Update the list of status codes to include 201 - 203.
- Remove the fact about the temporary workaround for chunked responses
(this is verified using reg-test compression/h00000.vtc).
- Add malformed ETags
see b229f018ee
This commit should be backported together with b229f018ee
the changes should be correct until 1.7 at the very least, possibly older.
RFC 7232 section 2.3.3 states:
> Note: Content codings are a property of the representation data,
> so a strong entity-tag for a content-encoded representation has to
> be distinct from the entity tag of an unencoded representation to
> prevent potential conflicts during cache updates and range
> requests. In contrast, transfer codings (Section 4 of [RFC7230])
> apply only during message transfer and do not result in distinct
> entity-tags.
Thus a strong ETag must be changed when compressing. Usually this is done
by converting it into a weak ETag, which represents a semantically, but not
byte-by-byte identical response. A conversion to a weak ETag still allows
If-None-Match to work.
This should be backported to 1.9 and might be backported to every supported
branch with compression.
It was mentioned when releasing 1.8 but early bugs have long been
addressed and this comment discourages some users from using threads.
This should be backported to 1.9 and 1.8 now.
Some servers may wish to limit the total number of requests they execute
over a connection because some of their components might leak resources.
In HTTP/1 it was easy, they just had to emit a "connection: close" header
field with the last response. In HTTP/2, it's less easy because the info
is not always shared with the component dealing with the H2 protocol and
it could be harder to advertise a GOAWAY with a stream limit.
This patch provides a solution to this by adding a new "max-reuse" parameter
to the server keyword. This parameter indicates how many times an idle
connection may be reused for new requests. The information is made available
and the underlying muxes will be able to use it at will.
This patch should be backported to 1.9.
When an argument <draws> is present, it must be an integer value one
or greater, indicating the number of draws before selecting the least
loaded of these servers. It was indeed demonstrated that picking the
least loaded of two servers is enough to significantly improve the
fairness of the algorithm, by always avoiding to pick the most loaded
server within a farm and getting rid of any bias that could be induced
by the unfair distribution of the consistent list. Higher values N will
take away N-1 of the highest loaded servers at the expense of performance.
With very high values, the algorithm will converge towards the leastconn's
result but much slower. The default value is 2, which generally shows very
good distribution and performance. This algorithm is also known as the
Power of Two Random Choices and is described here :
http://www.eecs.harvard.edu/~michaelm/postscripts/handbook2001.pdf
Openssl switched from aes128 to aes256 since may 2016 to compute
tls ticket secrets used by default. But Haproxy still handled only
128 bits keys for both tls key file and CLI.
This patch permit the user to set aes256 keys throught CLI or
the key file (80 bytes encoded in base64) in the same way that
aes128 keys were handled (48 bytes encoded in base64):
- first 16 bytes for the key name
- next 16/32 bytes for aes 128/256 key bits key
- last 16/32 bytes for hmac 128/256 bits
Both sizes are now supported (but keys from same file must be
of the same size and can but updated via CLI only using a key of
the same size).
Note: This feature need the fix "dec func ignores padding for output
size checking."
Document a bit better than allow-0rtt can trivially be used for replay attacks,
and so should only be used when it's safe to replay a request.
This should probably be backported to 1.8 and 1.9.
Application-Layer Protocol Negotiation (ALPN, RFC7301) is a TLS
extension which allows a client to present a preference for which
protocols it wishes to connect to, when a single port supports multiple
multiple application protocols.
It allows a transparent proxy to take a decision based on the beginning
of an SSL/TLS stream without deciphering it.
The new fetch "req.ssl_alpn" extracts the ALPN protocol names that may
be present in the ClientHello message.
This function will be used to move parts of a buffer to another place
in the same buffer, even if the parts overlap. In order to keep things
under reasonable control, it only uses a length and absolute offsets
for the source and destination, and doesn't consider head nor data.
Released version 2.0-dev0 with the following main changes :
- BUG/MAJOR: connections: Close the connection before freeing it.
- REGTEST: Require the option LUA to run lua tests
- REGTEST: script: Process script arguments before everything else
- REGTEST: script: Evaluate the varnishtest command to allow quoted parameters
- REGTEST: script: Add the option --clean to remove previous log direcotries
- REGTEST: script: Add the option --debug to show logs on standard ouput
- REGTEST: script: Add the option --keep-logs to keep all log directories
- REGTEST: script: Add the option --use-htx to enable the HTX in regtests
- REGTEST: script: Print only errors in the results report
- REGTEST: Add option to use HTX prefixed by the macro 'no-htx'
- REGTEST: Make reg-tests target support argument.
- REGTEST: Fix a typo about barrier type.
- REGTEST: Be less Linux specific with a syslog regex.
- REGTEST: Missing enclosing quotes for ${tmpdir} macro.
- REGTEST: Exclude freebsd target for some reg tests.
- BUG/MEDIUM: h2: Don't forget to quit the sending_list if SUB_CALL_UNSUBSCRIBE.
- BUG/MEDIUM: mux-h2: Don't forget to quit the send list on error reports
- BUG/MEDIUM: dns: Don't prevent reading the last byte of the payload in dns_validate_response()
- BUG/MEDIUM: dns: overflowed dns name start position causing invalid dns error
- BUG/MINOR: compression/htx: Don't compress responses with unknown body length
- BUG/MINOR: compression/htx: Don't add the last block of data if it is empty
- MEDIUM: mux_h1: Implement h1_show_fd.
- REGTEST: script: Add support of alternatives in requited options list
- REGTEST: Add a basic test for the compression
- BUG/MEDIUM: mux-h2: don't needlessly wake up the demux on short frames
- REGTEST: A basic test for "http-buffer-request"
- BUG/MEDIUM: server: Also copy "check-sni" for server templates.
- MINOR: ssl: Add ssl_sock_set_alpn().
- MEDIUM: checks: Add check-alpn.
Add a way to configure the ALPN used by check, with a new "check-alpn"
keyword. By default, the checks will use the server ALPN, but it may not
be convenient, for instance because the server may use HTTP/2, while checks
are unable to do HTTP/2 yet.
Released version 1.9.0 with the following main changes :
- BUG/MEDIUM: compression: Use the right buffer pointers to compress input data
- BUG/MINOR: mux_pt: Set CS_FL_WANT_ROOM when count is zero in rcv_buf() callback
- BUG/MEDIUM: connection: Add a new CS_FL_ERR_PENDING flag to conn_streams.
- CONTRIB: debug: teach the "flags" utility about new conn_stream flags
- BUG/MEDIUM: stream-int: always clear CS_FL_WANT_ROOM before receiving
- BUG/MEDIUM: mux-h2: also restart demuxing when data are pending in demux
- BUG/MEDIUM: mux-h2: restart demuxing as soon as demux data are available
- BUG/MEDIUM: h2: fix aggregated cookie length computation in HTX mode
- MINOR: mux-h2: report more h2c, last h2s and cs information on "show fd"
- CONTRIB: debug: report stream-int's flag SI_FL_CLEAN_ABRT
- MINOR: cli/stream: add the conn_stream in "show sess" output
- BUG/MINOR: mux-h2: don't report a fantom h2s in "show fd"
- BUG/MINOR: cli/fd: don't isolate the thread for each individual fd
- MINOR: objtype: report a few missing types in names and base pointers
- BUG/MEDIUM: mux-h2: make sure to report synchronous errors after EOS
- BUG/MEDIUM: mux-h2: report asynchronous errors in h2_wake_some_streams()
- BUG/MEDIUM: mux-h2: make sure the demux also wakes streams up on errors
- BUG/MINOR: mux-h1: report the correct frontend in error captures
- BUG/MEDIUM: stream-int: also wake the stream up on end of transfer
- MEDIUM: h2: properly check and deduplicate the content-length header in HTX
- BUG/MEDIUM: stream: Forward the right amount of data before infinite forwarding
- BUG/MINOR: proto_htx: Call the HTX version of the function managing client cookies
- BUG/MEDIUM: lua/htx: Handle EOM in receive/get_line calls in HTTP applets
- BUG/MINOR: lua: Return an error if a legacy HTTP applet doesn't send anything
- MINOR: compression: Remove the thread_local variable buf_output
- CLEANUP: connection: rename subscription events values and event field
- CLEANUP: connection: rename conn->mux_ctx to conn->ctx
- MINOR: connection: remove an unwelcome dependency on struct stream
- CLEANUP: stream-int: consistently call the si/stream_int functions
- BUG/MEDIUM: h1: Don't shutw/shutr the connection if we have keepalive.
- BUG/MEDIUM: H2: Make sure htx is set even on empty frames.
- BUG/MEDIUM: mux-h2: pass CS_FL_ERR_PENDING to h2_wake_some_streams()
- MEDIUM: stream-int: always consider all CS errors on the send side
- BUG/MEDIUM: h2: Make sure we don't set CS_FL_ERROR if there's still data.
- CLEANUP: mux-h2: implement h2s_notify_{send,recv} to report events to subscribers
- MINOR: mux-h2: add a new function h2s_alert() to call the data layer
- BUG/MEDIUM: mux-h2: make use of h2s_alert() to report aborts
- MINOR: connection: add cs_set_error() to set the error bits
- CLEANUP: mux-h2: make use of cs_set_error()
- BUG/MINOR: mux-h2: make sure we check the conn_stream in early data
- BUG/MEDIUM: h2: Don't wait for flow control if the connection had a shutr.
- MINOR: cli/show_fd: report that a connection is back or not
- SCRIPTS: add the slack channel URL to the announce script
- CLEANUP: remove my name and address from the copyright banner
- DOC: mention in the readme that 1.9 is a stable version now
Released version 1.9-dev11 with the following main changes :
- BUG/MEDIUM: connection: Don't use the provided conn_stream if it was tried.
- REGTEST/MINOR: remove double body specification for server txresp
- BUG/MEDIUM: connections: Remove error flags when retrying.
- REGTEST/MINOR: skip seamless-reload test with abns socket on freebsd
- REGTEST/MINOR: remove health-check that can make the test fail
- DOC: clarify that check-sni needs an argument.
- DOC: refer to check-sni in the documentation of sni
- BUG/MEDIUM: mux-h2: fix encoding of non-GET/POST methods
- BUG/MINOR: mux-h1: Fix conn_mode processing for headerless outgoing messages
- BUG/MEDIUM: mux-h1: Add a BUSY mode to not loop on pipelinned requests
- BUG/MEDIUM: mux-h1: Don't loop on the headers parsing if the read0 was received
- BUG/MEDIUM: htx: Always do a defrag if a block value is replace by a bigger one
- BUG/MEDIUM: mux-h2: Don't forget to set the CS_FL_EOS flag with htx.
- BUG/MINOR: hpack: fix off-by-one in header name encoding length calculation
- CLEANUP: hpack: no need to include chunk.h, only include buf.h
- MINOR: hpack: simplify the len to bytes conversion
- MINOR: hpack: use ist2bin() to copy header names in hpack_encode_header()
- MINOR: hpack: optimize header encoding for short names
- CONTRIB: hpack: add a compressed stream generator for the encoder
- MEDIUM: hpack: make it possible to encode any static header name
- MINOR: hpack: move the length computation and encoding functions to .h
- MINOR: hpack: provide a function to encode a short indexed header
- MINOR: hpack: provide a function to encode a long indexed header
- MINOR: hpack: provide new functions to encode the ":status" header
- MEDIUM: mux-h2: make use of standard HPACK encoding functions for the status
- MINOR: hpack: provide a function to encode an HTTP method
- MEDIUM: mux-h2: make use of hpack_encode_method() to encode the method
- MINOR: hpack: provide a function to encode an HTTP scheme
- MEDIUM: mux-h2: make use of hpack_encode_scheme() to encode the scheme
- MINOR: hpack: provide a function to encode an HTTP path
- MEDIUM: mux-h2: make use of hpack_encode_path() to encode the path
- REGTEST: add the HTTP rules test involving HTX processing
- REORG: connection: centralize the conn_set_{tos,mark,quickack} functions
- MEDIUM: cli: rework the CLI proxy parser
- MINOR: cli: parse prompt command in the CLI proxy
- MINOR: cli: implements 'quit' in the CLI proxy
- BUG/MINOR: cli: wait for payload data even without prompt
- MEDIUM: cli: handle payload in CLI proxy
- MINOR: cli: use pcli_flags for prompt activation
- MINOR: compression: Rename the function check_legacy_http_comp_flt()
- MINOR: cache/htx: Don't use the same cache on HTX and legacy HTTP proxies
- MINOR: cache: Register the cache as a data filter only if response is cacheable
- MEDIUM: cache/htx: Add the HTX support into the cache
- MINOR: cache: Improve and simplify the cache configuration check
- MINOR: filters: Export the name of known filters
- MEDIUM: cache/compression: Add a way to safely combined compression and cache
- MEDIUM: cache: Require an explicit filter declaration if other filters are used
- REORG: htx: merge types+proto into common/htx.h
- REORG: http: create http_msg.c to place there some legacy HTTP parts
- REORG: h1: move legacy http functions to http_msg.c
- REORG: h1: move the h1_state definition to proto_http
- CLEANUP: h1: remove some occurrences of unneeded h1.h inclusions
- REORG: h1: merge types+proto into common/h1.h
- CLEANUP: stream: remove SF_TUNNEL, SF_INITIALIZED, SF_CONN_TAR
- MEDIUM: mux-h1: implement true zero-copy of DATA blocks
- MINOR: config: round up global.tune.bufsize to the next multiple of 2 void*
- BUG/MINOR: mux-h2: refrain from muxing during the preface
- BUG/MINOR: mux-h2: advertise a larger connection window size
- DOC: master CLI documentation in management.txt
- MINOR: mux-h2: avoid copying large blocks into full buffers
- MEDIUM: mux-h2: implement true zero-copy send of large HTX DATA blocks
- MINOR: mux-h2: force reads to be HTX-aligned in HTX mode
- MINOR: cli: change 'show proc' output of old processes
- BUG/MEDIUM: mux-h1: Fix the zero-copy on output for chunked messages
- BUG: dns: Prevent stack-exhaustion via recursion loop in dns_read_name
- BUG: dns: Prevent out-of-bounds read in dns_read_name()
- BUG: dns: Prevent out-of-bounds read in dns_validate_dns_response()
- BUG: dns: Fix out-of-bounds read via signedness error in dns_validate_dns_response()
- BUG: dns: Fix off-by-one write in dns_validate_dns_response()
- REGTEST: the cache regtest requires haproxy 1.9
- MEDIUM: cli: store CLI level in the appctx
- MEDIUM: cli: show and change CLI permissions
- CLEANUP: cli: use dedicated define instead of appctx ones
- MEDIUM: cli: handle CLI level from the master CLI
- BUG/MEDIUM: cli: handle correctly prefix and payload
- BUILD: Makefile: Implements the help target
- REGTESTS: adjust the http-rules regtest to support window updates
- BUG/MEDIUM: connections: Remove CS_FL_EOS | CS_FL_REOS on retry.
- BUG/MEDIUM: stream_interface: Don't report read0 if we were not connected.
- BUG/MEDIUM: connection: Just make sure we closed the fd on connection failure.
- MEDIUM: mux: Add an optional "reset" method.
- BUG/MEDIUM: mux-h1: Fix loop if server closes its connection with unparsed data
- MINOR: mux-h1: Add helper functions to wake a stream from recv or send
- BUG/MEDIUM: mux-h1: Wake the stream for send once the connection is established
- BUG/MEDIUM: connections: Don't attempt to reuse an unusable connection.
- MEDIUM: htx: Try to take a connection over if it has no owner.
- REGTEST: Reg testing improvements.
- REGTEST: Add a first test for health-checks.
- REGTEST: Reg test for "check" health-check option.
- REGTEST: level 1 health-check test 2.
- REGTEST: Add miscellaneous reg tests for health-checks.
- REGTEST: add a few HTTP messaging tests
- MINOR: lb: make the leastconn algorithm more accurate
- REGTEST: fix missing space in checks/s00001
- REGTEST: http-messaging: add "option http-buffer-request" for H2 tests
- BUG/MEDIUM: cache: fix random crash on filter parser's error path
- MINOR: connection: realign empty buffers in muxes, not transport layers
- MINOR: mux_h1/h2: simplify the zero-copy Rx alignment
- MINOR: backend: count the number of connect and reuse per server and per backend
- BUG/MINOR: stats: fix inversion of failed header rewrites and other statuses
- MINOR: tools: increase the number of ITOA strings to 16
- MINOR: cache: report the number of cache lookups and cache hits
- MEDIUM: tasks: check the global task mask instead of the thread number
- MINOR: mworker: set all_threads_mask and pid_bit to 1
- BUG/MINOR: proto_htx: Fix htx_res_set_status to also set the reason
- BUG/MINOR: stats: Parse post data for HTX streams
- MINOR: payload/htx: Adapt smp_fetch_len to be HTX aware
- MINOR: http_fecth: Implement body_len and body_size sample fetches for the HTX
- MAJOR: lua: Forbid calls to Channel functions for LUA scripts in HTTP proxies
- MEDIUM: lua/htx: Adapt functions of the HTTP to be compatible with HTX
- MINOR: lua/htx: Adapt the functions get_in_length and is_full to be HTX aware
- MAJOR: lua/htx: Adapt HTTP applets to support HTX messages
- MINOR: lua: Remove useless check on the messages state in HTTP functions
- BUG/MEDIUM: htx: When performing zero-copy, start from the right offset.
- BUG/MINOR: mworker: don't use unitialized mworker_proc struct
- MINOR: mworker/cli: indicate in the master prompt when a reload failed
- MINOR: cli: implements 'reload' on master CLI
- BUG/MEDIUM: log: Don't call sample_fetch_as_type if we don't have a stream.
- BUG/MEDIUM: mux-h1: make sure we always have at least one HTX block to send
- BUG/MAJOR: backend: only update server's counters when the server exists
- MINOR: tools: preset the port of fd-based "sockets" to zero
- BUG/MINOR: log: fix logging to both FD and IP
- REGTEST: Add a reg test for HTTP cookies.
- BUILD: ssl: Fix compilation without deprecated OpenSSL 1.1 APIs
- BUILD: thread: properly report multi-thread support
- BUG/MINOR: logs: leave startup-logs global and not per-thread
- BUG/MEDIUM: threads: don't close the thread waker pipe if not init
- BUG/MAJOR: compression/cache: Make it really works with these both filters
- BUG/MEDIUM: h2: Don't forget to destroy the h2s after deferred shut.
- MEDIUM: proxy: Set http-reuse safe as default.
- MEDIUM: servers: Add a command to limit the number of idling connections.
- MEDIUM: servers: Replace idle-timeout with pool-purge-delay.
- MEDIUM: mux: Destroy the stream before trying to add the conn to the idle list.
- MEDIUM: mux: provide the session to the init() and attach() method.
- MEDIUM: sessions: Don't keep an infinite number of idling connections.
- MEDIUM: servers: Be more agressive when adding H2 connection to idle lists.
- MEDIUM: mux_h2: Always set CS_FL_NOT_FIRST for new conn_streams.
- BUG/MEDIUM: htx/cache: use the correct class of error codes on abort
- BUG/MINOR: cache: also consider CF_SHUTR to abort delivery
- MINOR: pools: Cast to volatile int * instead of int *.
- MINOR: debug: make the ABORT_NOW macro use a volatile int
- BUG/MEDIUM: h2: Don't destroy the h2s if it still has a cs attached.
- BUG/MEDIUM: mux-h1: don't try to process an empty input buffer
- DOC: clarify the agent-check status line syntax
- BUG/MAJOR: hpack: fix length check for short names encoding
- DOC: split the README into README + INSTALL
