Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
The stats socket now allows the admin to disable, enable or shutdown a frontend.
This can be used when a bug is discovered in a configuration and it's desirable
to fix it but the rules in place don't allow to change a running config. Thus it
becomes possible to kill the frontend to release the port and start a new one in
a separate process.
This can also be used to temporarily make haproxy return TCP resets to incoming
requests to pretend the service is not bound. For instance, this may be useful
to quickly flush a very deep SYN backlog.
The frontend check and lookup code was factored with the "set maxconn" usage.
This one enforces a per-process connection rate limit, regardless of what
may be set per frontend. It can be a way to limit the CPU usage of a process
being severely attacked.
The side effect is that the global process connection rate is now measured
for each incoming connection, so it will be possible to report it.
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
Managing listeners state is difficult because they have their own state
and can at the same time have theirs dictated by their proxy. The pause
is not done properly, as the proxy code is fiddling with sockets. By
introducing new functions such as pause_listener()/resume_listener(), we
make it a bit more obvious how/when they're supposed to be used. The
listen_proxies() function was also renamed to resume_proxies() since
it's only used for pause/resume.
This patch is the first in a series aiming at getting rid of the maintain_proxies
mess. In the end, proxies should not call enable_listener()/disable_listener()
anymore.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
Now we're able to reject connections very early, so we need to use a
different counter for the connections that are received and the ones
that are accepted and converted into sessions, so that the rate limits
can still apply to the accepted ones. The session rate must still be
used to compute the rate limit, so that we can reject undesired traffic
without affecting the rate.
Right now, an HTTP server cannot track a TCP server and vice-versa.
This patch enables proxy tracking without relying on the proxy's mode
(tcp/http/health). It only requires a matching proxy name to exist. The
original function was renamed to findproxy_mode().
int get_backend_server(const char *bk_name, const char *sv_name,
struct proxy **bk, struct server **sv);
This function scans the list of backends and servers to retrieve the first
backend and the first server with the given names, and sets them in both
parameters. It returns zero if either is not found, or non-zero and sets
the ones it did not found to NULL. If a NULL pointer is passed for the
backend, only the pointer to the server will be updated.
There are a few remaining max values that need to move to counters.
Also, the counters are more often used than some config information,
so get them closer to the other useful struct members for better cache
efficiency.
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
The HTTP processing has been splitted into 7 steps, one of which
is not anymore HTTP-specific (content-switching). That way, it
becomes possible to use "use_backend" rules in TCP mode. A new
"use_server" directive should follow soon.
This is a first step towards support of multiple configuration files.
Now readcfgfile() only reads a file in memory and performs very minimal
parsing. The checks are performed afterwards.
Some users want to keep the max sessions/s seen on servers, frontends
and backends for capacity planning. It's easy to grab it while the
session count is updated, so let's keep it.
With this change, all frontends, backends, and servers maintain a session
counter and a timer to compute a session rate over the last second. This
value will be very useful because it varies instantly and can be used to
check thresholds. This value is also reported in the stats in a new "rate"
column.
There is a problem when an instance is marked "disabled". Its ports are
still bound but will not be unbound upon termination. This causes processes
to accumulate during soft restarts, and might even cause failures to restart
new ones due to the inability to bind to the same port.
The ideal solution would be to bind all ports at the end of the configuration
parsing. An acceptable workaround is to unbind all listeners of disabled
proxies. This is what the current patch does.
(cherry picked from commit a944218e9c)
(cherry picked from commit 8cfebbb82b87345bade831920177077e7d25840a)
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
This patch implements ability to set the current state of one server
by tracking another one. It:
- adds two variables: *tracknext, *tracked to struct server
- implements findserver(), similar to findproxy()
- adds "track" keyword accepting both "proxy/server" and "server" (assuming current proxy)
- verifies if both checks and tracking is not enabled at the same time
- changes set_server_down() to notify tracking server
- creates set_server_up(), set_server_disabled(), set_server_enabled() by
moving the code from process_chk() and adding notifications
- changes stats to show a name of tracked server instead of Chk/Dwn/Dwntime(html)
or by adding new variable (csv)
Changes from the previuos version:
- it is possibile to track independently of the declaration order
- one extra comma bug is fixed
- new condition to check if there is no disable-on-404 inconsistency
A new "timeout" keyword replaces old "{con|cli|srv}timeout", and
provides the ability to independantly set the following timeouts :
- client
- tarpit
- queue
- connect
- server
- appsession
Additionally, the "clitimeout", "contimeout" and "srvtimeout" values
are supported but deprecated. No warning is emitted yet when they are
used since the option is very new.
Other timeouts should follow soon now.
It's not easy to report useful information to help the user quickly
fix a configuration. This patch :
- removes the word "listener" in favor of "proxy" as it has been
used since the beginning ;
- ensures that the same function (hence the same words) will be
used to report capabilities of a proxy being declared and an
existing proxy ;
- avoid the term "conflicting capabilities" in favor of "overlapping
capabilities" which is more exact.
- just report that the same name is reused in case of warnings
This patch:
- adds proxy_mode_str() similar to proxy_type_str()
- adds a generic findproxy function used with default_backend/setbe/use_backed
- rewrite default_backend/senbe/use_backed to use introduced findproxy()
- relaxes duplicated proxy check
- changes capabilities displaying from "%X" to "%s" with a call to proxy_type_str()
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
Willy Tarreau
Alex Williams
Krzysztof Piotr Oledzki
Willy Tarreau