This flags will be used by multiplexers to warn a conn-stream (and, by
transitivity, a stream) it is not the first one created by the mux. It will help
mux H1 to handle keep-alive connections.
Since keep-alive mode is the default mode, the passive close has disappeared,
and in the code, httpclose and forceclose options are handled the same way:
connections with the client and the server are closed as soon as the request and
the response are received and missing "Connection: close" header is added in
each direction.
So to make things clearer, forceclose is now an alias for httpclose. And
httpclose is explicitly an active close. So the old passive close does not exist
anymore. Internally, the flag PR_O_HTTP_PCL has been removed and PR_O_HTTP_FCL
has been replaced by PR_O_HTTP_CLO. In HTTP analyzers, the checks done to find
the right mode to use, depending on proxies options and "Connection: " header
value, have been simplified.
This should only be a cleanup and no changes are expected.
To ease the refactoring, the function "http_header_add_tail" have been
remove. Now, "http_header_add_tail2" is always used. And the function
"capture_headers" have been renamed into "http_capture_headers". Finally, some
functions have been exported.
HTTP_FLG_* and HTTP_IS_* were moved from "proto/proto_http.h" to "common/http.h"
but the associated comment was forgotten during the move.
This is 1.9-specific and should not be backported.
Make sure we unsubscribe from events before si_release_endpoint destroys
the conn_stream, or it will be never called. To do so, move the call to
unsubscribe to si_release_endpoint() directly.
This is 1.9-specific and shouldn't be backported.
When subscribing, we don't need to provide a list element, only the h2 mux
needs it. So instead, Add a list element to struct h2s, and use it when a
list is needed.
This forces us to use the unsubscribe method, since we can't just unsubscribe
by using LIST_DEL anymore.
This patch is larger than it should be because it includes some renaming.
As we don't know how subscriptions are handled, we can't just assume we can
use LIST_DEL() to unsubscribe, so introduce a new method to mux and connections
to do so.
This call is now used quite a bit in the fd cache, to decide which cache
to add/remove the fd to/from, when waking up a task for a single thread
in __task_wakeup(), in fd_cant_recv() and in fd_process_cached_events(),
and we can replace it with a single instruction, removing ~30 instructions
and ~80 bytes from the inner loop of some of these functions.
In addition the test for zero value was replaced with a comment saying
that it is illegal and leads to an undefined behaviour. The code does
not make use of this useless case today.
In commit f161d0f51 ("BUG/MINOR: pools/threads: don't ignore DEBUG_UAF
on double-word CAS capable archs") I moved some defines and accidently
messed up with lockfree pools. The problem is that the HA_HAVE_CAS_DW
macro is not defined anymore where the CONFIG_HAP_LOCKLESS_POOLS macro
is set, so this fix implicitly disabled lockfree pools.
This patch fixes this by moving the capabilities definition to config.h
(probably that we'd benefit from having an "arch.h" file to declare the
capabilities offered by the architecture). In a test on a 12-core machine,
we used to measure 19s spent in the pool lock for 1M requests without
this patch, and 0 with it so that's definitely a net saving.
No backport is required, this is only for 1.9.
OpenSSL released support for TLSv1.3. It also added a separate function
SSL_CTX_set_ciphersuites that is used to set the ciphers used in the
TLS 1.3 handshake. This change adds support for that new configuration
option by adding a ciphersuites configuration variable that works
essentially the same as the existing ciphers setting.
Note that it should likely be backported to 1.8 in order to ease usage
of the now released openssl-1.1.1.
In ci_insert_line2() and b_rep_blk(), we can't afford to wrap, so don't use
b_tail() to check if we do, use __b_tail() instead.
This should be backported to previous versions.
The prototypes of functions find_hdr_value_end(), extract_cookie_value()
and http_header_match2() were still in proto_http.h while some of them
don't exist anymore and the others were just moved. Let's remove them.
In addition, da.c was updated to use http_extract_cookie_value() which
is the correct one.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
This ads support for accessing stick tables from Lua. The supported
operations are reading general table info, lookup by string/IP key, and
dumping the table.
Similar to "show table", a data filter is available during dump, and as
an improvement over "show table" it's possible to use up to 4 filter
expressions instead of just one (with implicit AND clause binding the
expressions). Dumping with/without filters can take a long time for
large tables, and should be used sparingly.
Instead of using si_cs_io_cb() in process_stream() use si_cs_send/si_cs_recv
instead, as si_cs_io_cb() may lead to process_stream being woken up when it
shouldn't be, and thus timeout would never get triggered.
Tim Dsterhus found using afl-fuzz that some parts of the HPACK decoder
use incorrect bounds checking which do not catch negative values after
a type cast. The first culprit is hpack_valid_idx() which takes a signed
int and is fed with an unsigned one, but a few others are affected as
well due to being designed to work with an uint16_t as in the table
header, thus not being able to detect the high offset bits, though they
are not exposed if hpack_valid_idx() is fixed.
The impact is that the HPACK decoder can be crashed by an out-of-bounds
read. The only work-around without this patch is to disable H2 in the
configuration.
CVE-2018-14645 was assigned to this bug.
This patch addresses all of these issues at once. It must be backported
to 1.8.
Callers of si_appctx() always use the result without checking it because
they know by construction that it's valid. This results in unchecked null
pointer warnings at -Wextra, so let's remove this test and make it clear
that it's up to the caller to check validity first.
stktable_data_ptr() currently performs null pointer checks but most
callers don't check the result since they know by construction that
it cannot be null. This causes valid warnings when building with
-Wextra which are worth addressing since it will result in better
code. Let's provide an unguarded version of this function for use
where the check is known to be useless and untested.
These two functions were apparently written on the same model as their
parents when added by commit 11bcb6c4f ("[MEDIUM] IPv6 support for syslog")
except that they perform an assignment instead of a return, and as a
result fall through the next case where the assigned value may possibly
be partially overwritten. At least under Linux the port offset is the
same in both sockaddr_in and sockaddr_in6 so the value is written twice
without side effects.
This needs to be backported as far as 1.5.
The transfer-encoding header processing was a bit lenient in this part
because it was made to read messages already validated by haproxy. We
absolutely need to reinstate the strict processing defined in RFC7230
as is currently being done in proto_http.c. That is, transfer-encoding
presence alone is enough to cancel content-length, and must be
terminated by the "chunked" token, except in the response where we
can fall back to the close mode if it's not last.
For this we now use a specific parsing function which updates the
flags and we introduce a new flag H1_MF_XFER_ENC indicating that the
transfer-encoding header is present.
Last, if such a header is found, we delete all content-length header
fields found in the message.
This flag is usefull to handle cases where there is no body, regardless of CL or
TE headers (for instance, responses to HEAD requests). It will not be set by the
parser itself.
The new function h1_parse_connection_header() is called when facing a
connection header in the generic parser, and it will set up to 3 bits
in h1m->flags indicating if at least one "close", "keep-alive" or "upgrade"
tokens was seen.
This will be needed for the mux to know how to process the Connection
header, and will save it from having to re-parse the request line since
it's captured on the fly.
Till now it was very difficult for a mux to know what proxy it was
working for. Let's pass the proxy when the mux is instanciated at
init() time. It's not yet used but the H1 mux will definitely need
it, just like the H2 mux when dealing with backend connections.
The h1 parser used to systematically turn header field names to lower
case because it was designed for H2. Let's add a flag which is off by
default to condition this behaviour so that when using it from an H1
parser it will not affect the message.
This state was only a delimiter between headers and body but it now
causes more harm than good because it requires someone to change it.
Since the H1 parser knows if we're in DATA or CHUNK_SIZE, simply let
it set the right next state so that h1m->state constantly matches
what is expected afterwards.
This will allow the parser to fill some extra fields like the method or
status without having to store them permanently in the HTTP message. At
this point however the parser cannot restart from an interrupted read.
This way we maintain the old mechanism stating that -2 means we block
on errors, -1 means we only capture them, and a positive value indicates
the position of the first error.
Currently the only user of struct h1m is the h2 mux when it has to parse
an H1 message coming from the channel. Unfortunately this is not enough
to efficiently parse HTTP/1 messages like those coming from the network
as we don't want to restart from scratch at every byte received.
This patch reintroduces the "next" offset into the H1 message so that any
H1 parser can use it to restart when called with a state that is not the
initial state.
This is the *parsing* state of an HTTP/1 message. Currently the h1_state
is composite as it's made both of parsing and control (100SENT, BODY,
DONE, TUNNEL, ENDING etc). The purpose here is to have a purely H1 state
that can be used by H1 parsers. For now it's equivalent to h1_state.
Remove the recv() method from mux and conn_stream.
The goal is to always receive from the upper layers, instead of waiting
for the connection later. For now, recv() is still called from the wake()
method, but that should change soon.
For struct connection, struct conn_stream, and for the h2 mux, add 2 new
lists, one that handles waiters for recv, and one that handles waiters for
recv and send. That way we can ask to subscribe for either recv or send.
In tasklet_free(), if we're currently in the runnable task list, don't
forget to decrement taks_list_size, or it'll end up being to big, and we may
not process tasks in the global runqueue.
This protocol is based on the uxst one, but it uses socketpair and FD
passing insteads of a connect()/accept().
The "sockpair@" prefix has been implemented for both bind and server
keywords.
When HAProxy wants to connect through a sockpair@, it creates 2 new
sockets using the socketpair() syscall and pass one of the socket
through the FD specified on the server line.
On the bind side, haproxy will receive the FD, and will use it like it
was the FD of an accept() syscall.
This protocol was designed for internal communication within HAProxy
between the master and the workers, but it's possible to use it
externaly with a wrapper and pass the FD through environment variabls.
It's possible to have several protocols per family which is a problem
with the current way the protocols are stored.
This allows to register a new protocol in HAProxy which is not a
protocol in the strict socket definition. It will be used to register a
SOCK_STREAM protocol using socketpair().
The following functions only deal with header field values and are agnostic
to the HTTP version so they were moved to http.c :
http_header_match2(), find_hdr_value_end(), find_cookie_value_end(),
extract_cookie_value(), parse_qvalue(), http_find_url_param_pos(),
http_find_next_url_param().
Those lacking the "http_" prefix were modified to have it.
These error codes and messages are agnostic to the version, even if
they are represented as HTTP/1.0 messages. Ultimately they will have
to be transformed into internal HTTP messages to be used everywhere.
The HTTP/1.1 100 Continue message was turned to an IST and the local
copy in the Lua code was removed.
