Since some systems switched to service managers which hide all warnings
by default, some users are not aware of some possibly important warnings
and get caught too late with errors that could have been detected earlier.
This patch adds a new global keyword, "zero-warning" and an equivalent
command-line option "-dW" to refuse to start in case any warning is
detected. It is recommended to use these with configurations that are
managed by humans in order to catch mistakes very early.
This helps quickly checking if the config produces any warning. For
this we reuse the "warned" bit field to add a new WARN_ANY bit that is
set by ha_warning(). The rest of the bit field was also cleaned from
unused bits.
Delete a certificate store from HAProxy and free its memory. The
certificate must be unused and removed from any crt-list or directory.
The deletion doesn't work with a certificate referenced directly with
the "crt" directive in the configuration.
The dump and show ssl crt-list commands does the same thing, they dump
the content of a crt-list, but the 'show' displays an ID in the first
column. Delete the 'dump' command so it is replaced by the 'show' one.
The old 'show' command is replaced by an '-n' option to dump the ID.
And the ID which was a pointer is replaced by a line number and placed
after colons in the filename.
Example:
$ echo "show ssl crt-list -n kikyo.crt-list" | socat /tmp/sock1 -
# kikyo.crt-list
kikyo.pem.rsa:1 secure.domain.tld
kikyo.pem.ecdsa:2 secure.domain.tld
Delete an entry in a crt-list, this is done by iterating over the
ckch_inst in the crtlist_entry. For each ckch_inst the bind_conf lock is
held during the deletion of the sni_ctx in the SNI trees. Everything
is free'd.
If there is several entries with the same certificate, a line number
must be provided to chose with entry delete.
For complex stick tables with many entries/columns, it can be beneficial
to filter using multiple criteria. The maximum number of filter entries
can be controlled by defining STKTABLE_FILTER_LEN during build time.
This patch can be backported to older releases.
The stats field ST_F_EINT has been added to report internal errors encountered
per proxy, per listener and per server. It appears in the CLI export and on the
HTML stats page.
Instead of relying on DEBUG_DEV for most debugging commands, which is
limiting, let's condition them to expert mode. Only one ("debug dev exec")
remains conditionned to DEBUG_DEV because it can have a security implication
on the system. The commands are not listed unless "expert-mode on" was first
entered on the CLI :
> expert-mode on
> help
debug dev close <fd> : close this file descriptor
debug dev delay [ms] : sleep this long
debug dev exec [cmd] ... : show this command's output
debug dev exit [code] : immediately exit the process
debug dev hex <addr> [len]: dump a memory area
debug dev log [msg] ... : send this msg to global logs
debug dev loop [ms] : loop this long
debug dev panic : immediately trigger a panic
debug dev stream ... : show/manipulate stream flags
debug dev tkill [thr] [sig] : send signal to thread
> debug dev stream
Usage: debug dev stream { <obj> <op> <value> | wake }*
<obj> = {strm | strm.f | sif.f | sif.s | sif.x | sib.f | sib.s | sib.x |
txn.f | req.f | req.r | req.w | res.f | res.r | res.w}
<op> = {'' (show) | '=' (assign) | '^' (xor) | '+' (or) | '-' (andnot)}
<value> = 'now' | 64-bit dec/hex integer (0x prefix supported)
'wake' wakes the stream asssigned to 'strm' (default: current)
Some commands like the debug ones are not enabled by default but can be
useful on some production environments. In order to avoid the temptation
of using them incorrectly, let's introduce an "expert" mode for a CLI
connection, which allows some commands to appear and be used. It is
enabled by command "expert-mode on" which is not listed by default.
Now "show info" supports "desc" after the default and "typed" formats,
and "show stat" supports this after the typed format. In both cases
this appends the description for the represented metric between double
quotes. The same could be done for JSON output but would possibly require
to update the schema first.
In the management guide, this command was still referenced as "show stat
resolvers" instead of "show resolvers". The cli command was fixed by the commit
ff88efbd7 ("BUG/MINOR: dns: Fix CLI keyword declaration").
This patch fixes the issue #296. It can be backported as fas as 1.7.
Now it is possible for a reader to subscribe and wait for new events
sent to a ring buffer. When new events are written to a ring buffer,
the applets that are subscribed are woken up to display new events.
For now we only support this with the CLI applet called by "show events"
since the I/O handler is indeed a CLI I/O handler. But it's not
complicated to add other mechanisms to consume events and forward them
to external log servers for example. The wait mode is enabled by adding
"-w" after "show events <sink>". An extra "-n" was added to directly
seek to new events only.
The detail level initially based on syslog levels is not used, while
something related is missing, trace verbosity, to indicate whether or
not we want to call the decoding callback and what level of decoding
we want (raw captures etc). Let's change the field to "verbosity" for
this. A verbosity of zero means that the decoding callback is not
called, and all other levels are handled by this callback and are
source-specific. The source is now prompted to list the levels that
are proposed to the user. When the source doesn't define anything,
"quiet" and "default" are available.
Working on adding traces to mux-h2 revealed that the function names are
manually copied a lot in developer traces. The reason is that they are
not preprocessor macros and as such cannot be concatenated. Let's
slightly adjust the trace() function call to take a function name just
after the file:line argument. This argument is only added for the
TRACE_DEVEL and 3 new TRACE_ENTER, TRACE_LEAVE, and TRACE_POINT macros
and left NULL for others. This way the function name is only reported
for traces aimed at the developers. The pretty-print callback was also
extended to benefit from this. This will also significantly shrink the
data segment as the "entering" and "leaving" strings will now be merged.
One technical point worth mentioning is that the function name is *not*
passed as an ist to the inline function because it's not considered as
a builtin constant by the compiler, and would lead to strlen() being
run on it from all call places before calling the inline function. Thus
instead we pass the const char * (that the compiler knows where to find)
and it's the __trace() function that converts it to an ist for internal
consumption and for the pretty-print callback. Doing this avoids losing
5-10% peak performance.
The "payload" trace level was ambigous because its initial purpose was
to be able to dump received data. But it doesn't make sense to force to
report data transfers just to be able to report state changes. For
example, all snd_buf()/rcv_buf() operations coming from the application
layer should be tagged at this level. So here we move this payload level
above the state transitions and rename it to avoid the ambiguity making
one think it's only about request/response payload. Now it clearly is
about any data transfer and is thus just below the developer level. The
help messages on the CLI and the doc were slightly reworded to help
remove this ambiguity.
The new "show events" CLI keyword lists supported event sinks. When
passed a buffer-type sink it completely dumps it.
no drops at all during attachment even at 8 millon evts/s.
still missing the attachment limit though.
At the moment the subsystem is still not complete and the various modules
do not yet produce traces (some dirty experimental code for H2 exists) but
this aims at easing a broad adoption.
Among the missing elements, we can enumerate the lack of configuration
of the sinks (e.g. it's still not possible to change their output format
nor enable/disable timestamps) and since timestamps are not availalbe in
the sinks, they are not collected nor passed by the traces.
Counters for cache_hits and cache_lookups were added with commit
a1214a50 ("MINOR: cache: report the number of cache lookups and cache
hits") but not documented in management.txt.
Counters for connect and reuse were added in the stats with commit
f1573848 ("MINOR: backend: count the number of connect and reuse
per server and per backend") but not documented the CSV format in
management.txt
s/accidently/accidentally/
s/any ot these messages/any of theses messages/
s/catched/caught/
s/completly/completely/
s/convertor/converter/
s/desribing/describing/
s/developper/developer/
s/eventhough/even though/
s/exectution/execution/
s/functionnality/functionality/
s/If it receive a/If it receives a/
s/In can even/It can even/
s/informations/information/
s/it will be remove /it will be removed /
s/langage/language/
s/mentionned/mentioned/
s/negociated/negotiated/
s/Optionnaly/Optionally/
s/ouputs/outputs/
s/outweights/outweighs/
s/ressources/resources/
This flag is constantly cleared by the scheduler and will be set by the
watchdog timer to detect stuck threads. It is also set by the "show
threads" command so that it is easy to spot if the situation has evolved
between two subsequent calls : if the first "show threads" shows no stuck
thread and the second one shows such a stuck thread, it indicates that
this thread didn't manage to make any forward progress since the previous
call, which is extremely suspicious.
When haproxy is built with DEBUG_DEV, the following commands are added
to the CLI :
debug dev close <fd> : close this file descriptor
debug dev delay [ms] : sleep this long
debug dev exec [cmd] ... : show this command's output
debug dev exit [code] : immediately exit the process
debug dev hex <addr> [len]: dump a memory area
debug dev log [msg] ... : send this msg to global logs
debug dev loop [ms] : loop this long
debug dev panic : immediately trigger a panic
debug dev tkill [thr] [sig] : send signal to thread
These are essentially aimed at helping developers trigger certain
conditions and are expected to be complemented over time.
The current "show threads" command was too limited as it was not possible
to dump other threads' detailed states (e.g. their tasks). This patch
goes further by using thread signals so that each thread can dump its
own state in turn into a shared buffer provided by the caller. Threads
are synchronized using a mechanism very similar to the rendez-vous point
and using this method, each thread can safely dump any of its contents
and the caller can finally report the aggregated ones from the buffer.
It is important to keep in mind that the list of signal-safe functions
is limited, so we take care of only using chunk_printf() to write to a
pre-allocated buffer.
This mechanism is enabled by USE_THREAD_DUMP and is enabled by default
on Linux 2.6.28+. On other platforms it falls back to the previous
solution using the loop and the less precise dump.
The new function ha_thread_dump() will dump debugging info about all known
threads. The current thread will contain a bit more info. The long-term goal
is to make it possible to use it in signal handlers to improve the accuracy
of some dumps.
The function dumps its output into the trash so as it was trivial to add,
a new "show threads" command appeared on the CLI.
Instead of having to manually turn task profiling on/off in the
configuration, by default it will work in "auto" mode, which
automatically turns on on any thread experiencing sustained loop
latencies over one millisecond averaged over the last 1024 samples.
This may happen with configs using lots of regex (thing map_reg for
example, which is the lazy way to convert Apache's rewrite rules but
must not be abused), and such high latencies affect all the process
and the problem is most often intermittent (e.g. hitting a map which
is only used for certain host names).
Thus now by default, with profiling set to "auto", it remains off all
the time until something bad happens. This also helps better focus on
the issues when looking at the logs as well as in "show sess" output.
It automatically turns off when the average loop latency over the last
1024 calls goes below 990 microseconds (which typically takes a while
when in idle).
This patch could be backported to stable versions after a bit more
exposure, as it definitely improves observability and the ability to
quickly spot the culprit. In this case, previous patch ("MINOR:
activity: make the profiling status per thread and not global") must
also be taken.
This patch adds a counter of calls on the orchestator peers task
and a counter on the tasks linked to applet i/o handler for
each peer.
Those two counters are useful to detect if a peer sync is active
or frozen.
This patch is related to the commit:
"MINOR: peers: Add a new command to the CLI for peers."
and should be backported with it.
Openssl switched from aes128 to aes256 since may 2016 to compute
tls ticket secrets used by default. But Haproxy still handled only
128 bits keys for both tls key file and CLI.
This patch permit the user to set aes256 keys throught CLI or
the key file (80 bytes encoded in base64) in the same way that
aes128 keys were handled (48 bytes encoded in base64):
- first 16 bytes for the key name
- next 16/32 bytes for aes 128/256 key bits key
- last 16/32 bytes for hmac 128/256 bits
Both sizes are now supported (but keys from same file must be
of the same size and can but updated via CLI only using a key of
the same size).
Note: This feature need the fix "dec func ignores padding for output
size checking."
Released version 2.0-dev0 with the following main changes :
- BUG/MAJOR: connections: Close the connection before freeing it.
- REGTEST: Require the option LUA to run lua tests
- REGTEST: script: Process script arguments before everything else
- REGTEST: script: Evaluate the varnishtest command to allow quoted parameters
- REGTEST: script: Add the option --clean to remove previous log direcotries
- REGTEST: script: Add the option --debug to show logs on standard ouput
- REGTEST: script: Add the option --keep-logs to keep all log directories
- REGTEST: script: Add the option --use-htx to enable the HTX in regtests
- REGTEST: script: Print only errors in the results report
- REGTEST: Add option to use HTX prefixed by the macro 'no-htx'
- REGTEST: Make reg-tests target support argument.
- REGTEST: Fix a typo about barrier type.
- REGTEST: Be less Linux specific with a syslog regex.
- REGTEST: Missing enclosing quotes for ${tmpdir} macro.
- REGTEST: Exclude freebsd target for some reg tests.
- BUG/MEDIUM: h2: Don't forget to quit the sending_list if SUB_CALL_UNSUBSCRIBE.
- BUG/MEDIUM: mux-h2: Don't forget to quit the send list on error reports
- BUG/MEDIUM: dns: Don't prevent reading the last byte of the payload in dns_validate_response()
- BUG/MEDIUM: dns: overflowed dns name start position causing invalid dns error
- BUG/MINOR: compression/htx: Don't compress responses with unknown body length
- BUG/MINOR: compression/htx: Don't add the last block of data if it is empty
- MEDIUM: mux_h1: Implement h1_show_fd.
- REGTEST: script: Add support of alternatives in requited options list
- REGTEST: Add a basic test for the compression
- BUG/MEDIUM: mux-h2: don't needlessly wake up the demux on short frames
- REGTEST: A basic test for "http-buffer-request"
- BUG/MEDIUM: server: Also copy "check-sni" for server templates.
- MINOR: ssl: Add ssl_sock_set_alpn().
- MEDIUM: checks: Add check-alpn.
If a reload was issued to the master process and failed, it is critical
that the admin sees it because it means that the saved configuration
does not work anymore and might not be usable after a full restart. For
this reason in this case we modify the "master" prompt to explicitly
indicate that a reload failed.
Handle the CLI level in the master CLI. In order to do this, the master
CLI stores the level in the stream. Each command are prefixed by a
"user" or "operator" command before they are forwarded to the target
CLI.
The level can be configured in the haproxy program arguments with the
level keyword: -S /tmp/sock,level,admin -S /tmp/sock2,level,user.
Implement "show cli level" which show the level of the current CLI
session.
Implement "operator" and "user" which lower the permissions of the
current CLI session.
Change the output of the relative pid for the old processes, displays
"[was: X]" instead of just "X" which was confusing if you want to
connect to the CLI of an old PID.
This is a new global setting which enables or disables CPU profiling
per task. For now it only sets/resets the variable based on the global
option "profiling.tasks" and supports showing it as well as setting it
from the CLI using "show profiling" and "set profiling". The option will
be used by a future commit. It was done in a way which should ease future
addition of profiling options.
For caching it will be convenient to have indexes associated with pools,
without having to dereference the pool itself. One solution could consist
in replacing all pool pointers with integers but this would limit the
number of allocatable pools. Instead here we allocate the 32 first pools
from a pre-allocated array whose base address is known so that it's trivial
to convert a pool to an index in this array. Pools that cannot fit there
will be allocated normally.
