2008-01-02 19:48:34 +00:00
# This GNU Makefile supports different OS and CPU combinations.
#
2005-12-17 13:08:03 +00:00
# You should use it this way :
2019-06-14 13:52:01 +00:00
# [g]make TARGET=os [ARCH=arch] [CPU=cpu] USE_xxx=1 ...
#
# When in doubt, invoke help, possibly with a known target :
# [g]make help
2019-06-14 14:32:09 +00:00
# [g]make help TARGET=linux-glibc
2007-07-11 07:19:31 +00:00
#
2018-11-19 07:15:54 +00:00
# By default the detailed commands are hidden for a cleaner output, but you may
# see them by appending "V=1" to the make command.
#
2019-03-27 09:57:49 +00:00
# Valid USE_* options are enumerated in the "use_opts" variable and are listed
# below. Most of them are automatically set by the TARGET, others have to be
# explicitly specified :
2008-01-02 19:48:34 +00:00
# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
# USE_KQUEUE : enable kqueue() on BSD. Automatic.
2019-04-08 16:53:32 +00:00
# USE_EVPORTS : enable event ports on SunOS systems. Automatic.
2008-01-02 19:48:34 +00:00
# USE_NETFILTER : enable netfilter on Linux. Automatic.
# USE_PCRE : enable use of libpcre for regex. Recommended.
2013-04-04 21:05:32 +00:00
# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
2016-11-21 21:25:58 +00:00
# USE_PCRE2 : enable use of libpcre2 for regex.
# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2
2008-01-02 19:48:34 +00:00
# USE_POLL : enable poll(). Automatic.
2017-10-25 15:55:27 +00:00
# USE_THREAD : enable threads support.
2008-01-02 19:48:34 +00:00
# USE_STATIC_PCRE : enable static libpcre. Recommended.
2016-11-21 21:25:58 +00:00
# USE_STATIC_PCRE2 : enable static libpcre2.
2008-01-02 19:48:34 +00:00
# USE_TPROXY : enable transparent proxy. Automatic.
2012-06-03 22:42:09 +00:00
# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
2021-01-08 04:35:52 +00:00
# USE_LIBCRYPT : enable encrypted passwords using -lcrypt
[BUILD] fix platform-dependant build issues related to crypt()
Holger Just and Ross West reported build issues on FreeBSD and
Solaris that were initially caused by the definition of
_XOPEN_SOURCE at the top of auth.c, which was required on Linux
to avoid a build warning.
Krzysztof Oledzki found that using _GNU_SOURCE instead also worked
on Linux and did not cause any issue on several versions of FreeBSD.
Solaris still reported a warning this time, which was fixed by
including <crypt.h>, which itself is not present on FreeBSD nor on
all Linux toolchains.
So by adding a new build option (NEED_CRYPT_H), we can get Solaris
to get crypt() working and stop complaining at the same time, without
impacting other platforms.
This fix was tested at least on several linux toolchains (at least
uclibc, glibc 2.2.5, 2.3.6 and 2.7), on FreeBSD 4 to 8, Solaris 8
(which needs crypt.h), and AIX 5.3 (without crypt.h).
Every time it builds without a warning.
2010-03-04 18:10:14 +00:00
# USE_CRYPT_H : set it if your system requires including crypt.h
2011-03-23 19:00:53 +00:00
# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
2012-05-18 13:48:30 +00:00
# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
2022-11-23 15:41:25 +00:00
# USE_OPENSSL_WOLFSSL : enable use of wolfSSL with the OpenSSL API
2022-04-11 16:41:24 +00:00
# USE_ENGINE : enable use of OpenSSL Engine.
2015-01-23 13:06:13 +00:00
# USE_LUA : enable Lua support.
2012-10-08 18:11:03 +00:00
# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
2020-09-30 05:04:48 +00:00
# USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic.
2019-04-15 17:38:50 +00:00
# USE_PRCTL : enable use of prctl(). Automatic.
2021-08-21 08:13:10 +00:00
# USE_PROCCTL : enable use of procctl(). Automatic.
2021-04-22 12:14:22 +00:00
# USE_ZLIB : enable zlib library support and disable SLZ
# USE_SLZ : enable slz library instead of zlib (default=enabled)
2012-11-16 15:12:27 +00:00
# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
2013-04-02 14:43:24 +00:00
# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
2014-11-17 14:11:45 +00:00
# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
2015-03-17 13:33:22 +00:00
# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
2022-12-21 10:59:33 +00:00
# USE_MATH : enable use of -lm. Automatic.
2018-10-18 14:28:54 +00:00
# USE_RT : enable it if your system requires -lrt. Automatic on Linux.
2020-03-03 14:40:23 +00:00
# USE_BACKTRACE : enable backtrace(). Automatic on Linux.
2021-04-02 13:31:10 +00:00
# USE_PROMEX : enable the Prometheus exporter
2015-06-01 12:00:07 +00:00
# USE_DEVICEATLAS : enable DeviceAtlas api.
2015-06-29 14:43:25 +00:00
# USE_51DEGREES : enable third party device detection library from 51Degrees
2022-02-14 12:05:45 +00:00
# USE_51DEGREES_V4 : enable use of 51Degrees V4 engine with Hash algorithm
2019-04-19 14:03:32 +00:00
# USE_WURFL : enable WURFL detection library from Scientiamobile
2017-11-20 14:58:35 +00:00
# USE_SYSTEMD : enable sd_notify() support.
2019-03-29 20:30:17 +00:00
# USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init
2019-05-17 08:08:49 +00:00
# USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic.
CONTRIB: opentracing: add the OpenTracing filter
This commit adds the OpenTracing filter (hereinafter we will use the
abbreviated name 'the OT filter') to the contrib tree.
The OT filter adds native support for using distributed tracing in HAProxy.
This is enabled by sending an OpenTracing compliant request to one of the
supported tracers; such as Datadog, Jaeger, Lightstep and Zipkin tracers.
Please note: tracers are not listed by any preference, but alphabetically.
The OT filter is a standard HAProxy filter, so what applies to others also
applies to this one (of course, by that I mean what is described in the
documentation, more precisely in the doc/internals/filters.txt file).
The OT filter activation is done explicitly by specifying it in the HAProxy
configuration. If this is not done, the OT filter in no way participates
in the work of HAProxy.
As for the impact on HAProxy speed, this is documented with several tests
located in the test directory, and the result is found in the README-speed-*
files. In short, the speed of operation depends on the way it is used and
the complexity of the configuration, from an almost immeasurable impact to
a significant deceleration (5x and more). I think that in some normal use
the speed of HAProxy with the filter on will be quite satisfactory with a
slowdown of less than 4%.
The OT filter allows intensive use of ACLs, which can be defined anywhere in
the configuration. Thus, it is possible to use the filter only for those
connections that are of interest to us.
More detailed documentation related to the operation, configuration and use
of the filter can be found in the contrib/opentracing directory.
To make the OpenTracing filter easier to configure and compile, several
entries have been added to the Makefile. When running the make utility,
it is possible to use several new arguments:
USE_OT=1 : enable the OpenTracing filter
OT_DEBUG=1 : compile the OpenTracing filter in debug mode
OT_INC=path : force the include path to libopentracing-c-wrapper
OT_LIB=path : force the lib path to libopentracing-c-wrapper
OT_RUNPATH=1 : add libopentracing-c-wrapper RUNPATH to haproxy executable
If USE_OT is set, then an additional Makefile from the contrib/opentracing
directory is included in the compilation process.
2020-12-09 15:54:31 +00:00
# USE_OT : enable the OpenTracing filter
2021-05-05 16:17:39 +00:00
# USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only.
2021-11-14 14:28:38 +00:00
# USE_LIBATOMIC : force to link with/without libatomic. Automatic.
2022-07-10 08:58:57 +00:00
# USE_PTHREAD_EMULATION: replace pthread's rwlocks with ours
2022-09-26 10:54:39 +00:00
# USE_SHM_OPEN : use shm_open() for the startup-logs
2007-07-11 07:19:31 +00:00
#
2008-01-02 19:48:34 +00:00
# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
2019-06-14 13:52:01 +00:00
# "USE_xxx=" (empty string). The list of enabled and disabled options for a
# given TARGET is enumerated at the end of "make help".
2008-01-02 19:48:34 +00:00
#
# Variables useful for packagers :
2020-09-13 06:53:06 +00:00
# CC is set to "cc" by default and is used for compilation only.
# LD is set to "cc" by default and is used for linking only.
2009-04-11 17:45:50 +00:00
# ARCH may be useful to force build of 32-bit binary on 64-bit systems
2008-01-02 19:48:34 +00:00
# CFLAGS is automatically set for the specified CPU and may be overridden.
# LDFLAGS is automatically set to -g and may be overridden.
2016-05-30 11:39:32 +00:00
# DEP may be cleared to ignore changes to include files during development
2008-01-02 19:48:34 +00:00
# SMALL_OPTS may be used to specify some options to shrink memory usage.
# DEBUG may be used to set some internal debugging options.
2018-10-22 04:22:46 +00:00
# ERR may be set to non-empty to pass -Werror to the compiler
2008-01-02 19:48:34 +00:00
# ADDINC may be used to complete the include path in the form -Ipath.
# ADDLIB may be used to complete the library list in the form -Lpath -llib.
# DEFINE may be used to specify any additional define, which will be reported
# by "haproxy -vv" in CFLAGS.
# SILENT_DEFINE may be used to specify other defines which will not be
# reported by "haproxy -vv".
2017-06-01 15:38:58 +00:00
# EXTRA is used to force building or not building some extra tools.
2008-03-12 13:25:35 +00:00
# DESTDIR is not set by default and is used for installation only.
# It might be useful to set DESTDIR if you want to install haproxy
# in a sandbox.
2022-07-16 09:18:50 +00:00
# INSTALL is set to "install" by default and is used to provide the name of
# the install binary used by the install targets and any additional
# flags.
2008-03-12 13:25:35 +00:00
# PREFIX is set to "/usr/local" by default and is used for installation only.
# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
# only.
2008-03-12 13:57:54 +00:00
# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
# installation only.
2008-03-12 15:24:49 +00:00
# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
# installation only.
2020-01-12 12:55:41 +00:00
# HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path.
# HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath.
2008-01-02 19:48:34 +00:00
#
# Other variables :
2018-09-28 17:21:26 +00:00
# PCRE_CONFIG : force the binary path to get pcre config (by default
# pcre-config)
2008-01-02 19:48:34 +00:00
# PCREDIR : force the path to libpcre.
2013-02-13 11:39:06 +00:00
# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
2018-09-28 17:21:26 +00:00
# PCRE2_CONFIG : force the binary path to get pcre2 config (by default
# pcre2-config)
2013-09-17 13:26:39 +00:00
# SSL_LIB : force the lib path to libssl/libcrypto
# SSL_INC : force the include path to libssl/libcrypto
2022-11-23 15:41:25 +00:00
# WOLFSSL_INC : force the include path to wolfSSL
# WOLFSSL_LIB : force the lib path to wolfSSL
2015-01-23 13:06:13 +00:00
# LUA_LIB : force the lib path to lua
# LUA_INC : force the include path to lua
2015-03-03 22:13:03 +00:00
# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
2022-06-28 08:03:00 +00:00
# priority : lua5.4, lua54, lua5.3, lua53, lua).
CONTRIB: opentracing: add the OpenTracing filter
This commit adds the OpenTracing filter (hereinafter we will use the
abbreviated name 'the OT filter') to the contrib tree.
The OT filter adds native support for using distributed tracing in HAProxy.
This is enabled by sending an OpenTracing compliant request to one of the
supported tracers; such as Datadog, Jaeger, Lightstep and Zipkin tracers.
Please note: tracers are not listed by any preference, but alphabetically.
The OT filter is a standard HAProxy filter, so what applies to others also
applies to this one (of course, by that I mean what is described in the
documentation, more precisely in the doc/internals/filters.txt file).
The OT filter activation is done explicitly by specifying it in the HAProxy
configuration. If this is not done, the OT filter in no way participates
in the work of HAProxy.
As for the impact on HAProxy speed, this is documented with several tests
located in the test directory, and the result is found in the README-speed-*
files. In short, the speed of operation depends on the way it is used and
the complexity of the configuration, from an almost immeasurable impact to
a significant deceleration (5x and more). I think that in some normal use
the speed of HAProxy with the filter on will be quite satisfactory with a
slowdown of less than 4%.
The OT filter allows intensive use of ACLs, which can be defined anywhere in
the configuration. Thus, it is possible to use the filter only for those
connections that are of interest to us.
More detailed documentation related to the operation, configuration and use
of the filter can be found in the contrib/opentracing directory.
To make the OpenTracing filter easier to configure and compile, several
entries have been added to the Makefile. When running the make utility,
it is possible to use several new arguments:
USE_OT=1 : enable the OpenTracing filter
OT_DEBUG=1 : compile the OpenTracing filter in debug mode
OT_INC=path : force the include path to libopentracing-c-wrapper
OT_LIB=path : force the lib path to libopentracing-c-wrapper
OT_RUNPATH=1 : add libopentracing-c-wrapper RUNPATH to haproxy executable
If USE_OT is set, then an additional Makefile from the contrib/opentracing
directory is included in the compilation process.
2020-12-09 15:54:31 +00:00
# OT_DEBUG : compile the OpenTracing filter in debug mode
# OT_INC : force the include path to libopentracing-c-wrapper
# OT_LIB : force the lib path to libopentracing-c-wrapper
# OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable
2021-09-08 18:56:05 +00:00
# OT_USE_VARS : allows the use of variables for the OpenTracing context
2008-01-02 19:48:34 +00:00
# IGNOREGIT : ignore GIT commit versions if set.
# VERSION : force haproxy version reporting.
# SUBVERS : add a sub-version (eg: platform, model, ...).
2020-10-01 02:05:39 +00:00
# EXTRAVERSION : local version string to append (e.g. build number etc)
2008-01-02 19:48:34 +00:00
# VERDATE : force haproxy's release date.
2019-06-14 13:52:01 +00:00
# VTEST_PROGRAM : location of the vtest program to run reg-tests.
2020-09-12 06:24:48 +00:00
# DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
2008-01-02 19:48:34 +00:00
2022-11-17 07:23:10 +00:00
i n c l u d e i n c l u d e / m a k e / v e r b o s e . m k
2022-11-17 08:02:56 +00:00
i n c l u d e i n c l u d e / m a k e / c o m p i l e r . m k
2022-12-22 18:32:24 +00:00
i n c l u d e i n c l u d e / m a k e / o p t i o n s . m k
2017-09-14 17:05:45 +00:00
2008-03-12 13:25:35 +00:00
#### Installation options.
DESTDIR =
2022-07-16 09:18:50 +00:00
INSTALL = install
2008-03-12 13:25:35 +00:00
PREFIX = /usr/local
SBINDIR = $( PREFIX) /sbin
2008-11-16 00:29:03 +00:00
MANDIR = $( PREFIX) /share/man
2008-03-12 15:24:49 +00:00
DOCDIR = $( PREFIX) /doc/haproxy
2008-01-02 19:48:34 +00:00
#### TARGET system
2020-03-06 08:07:38 +00:00
# Use TARGET=<target_name> to optimize for a specific target OS among the
2008-01-02 19:48:34 +00:00
# following list (use the default "generic" if uncertain) :
2022-03-04 15:50:48 +00:00
# linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc,
# dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic,
2020-10-08 05:15:06 +00:00
# custom
2008-03-11 05:37:39 +00:00
TARGET =
2008-01-02 19:48:34 +00:00
#### TARGET CPU
# Use CPU=<cpu_name> to optimize for a particular CPU, among the following
# list :
BUILD: makefile: add a few popular ARMv8 CPU targets
This adds the following CPUs to the makefile:
- armv81 : modern ARM cores (Cortex A55/A75/A76/A78/X1, Neoverse, Graviton2)
- a72 : ARM Cortex-A72 or A73 (e.g. RPi4, Odroid N2, VIM3, AWS Graviton)
- a53 : ARM Cortex-A53 or any of its successors in 64-bit mode (e.g. RPi3)
- armv8-auto: both older and newer ARMv8 cores, with a minor runtime penalty
The reasons for these ones are:
- a53 is the common denominator of all of its successors, and does
support CRC32 which is used by the gzip compression, that the generic
armv8-a does not ;
- a72 supports the same features but is an out-of-order one that deserves
better optimizations; it's found in a number of high-performance
multi-core CPUs mainly oriented towards I/O and network processing
(Armada 8040, NXP LX2160A, AWS Graviton), and more recently the
Raspberry Pi 4. The A73 found in VIM3 and Odroid-N2 can use the same
optimizations ;
- armv81 is for generic ARMv8.1-A and above, automatically enables LSE
atomics which are way more scalable, and CRC32. This one covers modern
ARMv8 cores such as Cortex A55/A75/A76/A77/A78/X1 and the Neoverse
family such as found in AWS's Graviton2. The LSE instructions are
essential for large numbers of cores (8 and above).
- armv8-auto dynamically enables support for LSE extensions when
detected while still being compatible with older cores. There is a
small performance penalty in doing this (~3%) but a same executable
will perform optimally on a wider range of hardware. This should be
the best option for distros. It requires gcc-10 or gcc-9.4 and above.
When no CPU is specified, GCC version 10.2 and above will automatically
implement the wrapper used to detect the LSE extensions.
2021-05-12 07:47:30 +00:00
# generic, native, i586, i686, ultrasparc, power8, power9, custom,
# a53, a72, armv81, armv8-auto
2005-12-17 13:08:03 +00:00
CPU = generic
2005-12-17 11:21:26 +00:00
2009-04-11 17:45:50 +00:00
#### Architecture, used when not building for native architecture
# Use ARCH=<arch_name> to force build for a specific architecture. Known
# architectures will lead to "-m32" or "-m64" being added to CFLAGS and
# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets.
2010-11-28 06:41:00 +00:00
# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood.
2009-04-11 17:45:50 +00:00
ARCH =
2008-01-02 19:48:34 +00:00
#### Toolchain options.
2020-09-13 06:53:06 +00:00
CC = cc
2008-03-17 17:23:12 +00:00
LD = $( CC)
2005-12-17 13:08:03 +00:00
2008-01-02 19:48:34 +00:00
#### Debug flags (typically "-g").
# Those flags only feed CFLAGS so it is not mandatory to use this form.
DEBUG_CFLAGS = -g
2005-12-17 11:48:26 +00:00
2018-10-22 04:22:46 +00:00
#### Add -Werror when set to non-empty
ERR =
2018-11-23 07:29:15 +00:00
#### May be used to force running a specific set of reg-tests
REG_TEST_FILES =
2019-03-29 14:07:24 +00:00
REG_TEST_SCRIPT = ./scripts/run-regtests.sh
2018-11-23 07:29:15 +00:00
2010-11-28 07:28:15 +00:00
#### Compiler-specific flags that may be used to disable some negative over-
2020-02-25 09:10:47 +00:00
# optimization or to silence some warnings.
BUG/MAJOR: Use -fwrapv.
Haproxy relies on signed integer wraparound on overflow, however this is
really an undefined behavior, so the C compiler is allowed to do whatever
it wants, and clang does exactly that, and that causes problems when the
timer goes from <= INT_MAX to > INT_MAX, and explains the various hangs
reported on FreeBSD every 49.7 days. To make sure we get the intended
behavior, use -fwrapv for now. A proper fix is to switch everything to
unsigned, and it will happen later, but this is simpler, and more likely to
be backported to the stable branches.
Many thanks to David King, Mark S, Dave Cottlehuber, Slawa Olhovchenkov,
Piotr Pawel Stefaniak, and any other I may have forgotten for reporting that
and investigating.
2017-04-19 09:34:10 +00:00
# We rely on signed integer wraparound on overflow, however clang think it
# can do whatever it wants since it's an undefined behavior, so use -fwrapv
# to be sure we get the intended behavior.
2022-01-31 14:10:14 +00:00
WARN_CFLAGS := -Wtype-limits -Wshift-negative-value -Wshift-overflow= 2 \
-Wduplicated-cond -Wnull-dereference
2022-05-11 09:32:41 +00:00
SPEC_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement -Wfatal-errors
2022-01-31 14:10:14 +00:00
SPEC_CFLAGS += $( call cc-all-fast,$( WARN_CFLAGS) )
2022-01-31 14:27:58 +00:00
SPEC_CFLAGS += $( call cc-opt-alt,-fwrapv,-fno-strict-overflow)
2022-01-31 10:54:16 +00:00
SPEC_CFLAGS += $( cc-wnouwo)
2017-09-14 17:05:45 +00:00
SPEC_CFLAGS += $( call cc-nowarn,address-of-packed-member)
2017-10-27 09:06:11 +00:00
SPEC_CFLAGS += $( call cc-nowarn,unused-label)
BUILD: build with -Wextra and sort out certain warnings
We're not far from being able to build with -Wextra -Werror. The
following warnings had to be disabled to enable a clean build at
-Wextra on x86_64 using gcc 4.7, 5.5, 6.4 and 7.3 :
sign-compare, unused-parameter, old-style-declaration,
ignored-qualifiers, clobbered, missing-field-initializers,
implicit-fallthrough
The following extra warnings could be added without side effects :
type-limits, shift-negative-value, shift-overflow=2 duplicated-cond,
null-dereference
As a result, -Wextra was enabled by default, hoping it will help catch
issues over the long term. If new undesired warnings pop up, it's easy
to disable them using the nowarn call.
2018-09-20 08:38:08 +00:00
SPEC_CFLAGS += $( call cc-nowarn,sign-compare)
SPEC_CFLAGS += $( call cc-nowarn,unused-parameter)
SPEC_CFLAGS += $( call cc-nowarn,clobbered)
SPEC_CFLAGS += $( call cc-nowarn,missing-field-initializers)
2018-11-27 13:47:58 +00:00
SPEC_CFLAGS += $( call cc-nowarn,cast-function-type)
2019-09-24 07:43:34 +00:00
SPEC_CFLAGS += $( call cc-nowarn,string-plus-int)
2022-01-07 13:51:56 +00:00
SPEC_CFLAGS += $( call cc-nowarn,atomic-alignment)
2010-11-28 07:28:15 +00:00
2020-03-10 08:37:08 +00:00
i f n e q ( $( ERR ) , )
2022-12-21 14:49:56 +00:00
SPEC_CFLAGS += -Werror
2020-03-10 08:37:08 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
#### Memory usage tuning
# If small memory footprint is required, you can reduce the buffer size. There
# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
# with 1000 concurrent sessions. Putting it slightly lower than a page size
# will prevent the additional parameters to go beyond a page. 8030 bytes is
# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning
# macros include :
# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN.
# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024
SMALL_OPTS =
2005-12-17 11:21:26 +00:00
2008-01-02 19:48:34 +00:00
#### Debug settings
# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
2020-07-04 10:43:46 +00:00
# Use quotes and spaces if multiple options are needed (the DEBUG variables is
# passed as-is to CFLAGS). Please check sources for their exact meaning or do
# not use them at all. Some even more obscure ones might also be available
# without appearing here. Currently defined DEBUG macros include DEBUG_FULL,
2022-01-21 18:00:25 +00:00
# DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY,
2022-02-28 13:59:25 +00:00
# DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK,
2021-02-16 17:44:00 +00:00
# DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV,
2022-03-25 13:56:51 +00:00
# DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK.
2022-02-23 16:50:37 +00:00
DEBUG = -DDEBUG_STRICT -DDEBUG_MEMORY_POOLS
2005-12-17 13:08:03 +00:00
2012-05-25 21:53:16 +00:00
#### Trace options
# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
# possible.
TRACE =
2008-01-02 19:48:34 +00:00
#### Additional include and library dirs
# Redefine this if you want to add some special PATH to include/libs
ADDINC =
ADDLIB =
2005-12-17 12:46:33 +00:00
2008-01-02 19:48:34 +00:00
#### Specific macro definitions
# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
# not want to pollute the report with complex defines.
2012-10-05 13:47:31 +00:00
# The following settings might be of interest when SSL is enabled :
# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
# ciphers on "bind" lines instead of using OpenSSL's defaults.
# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
2008-01-02 19:48:34 +00:00
DEFINE =
SILENT_DEFINE =
2017-06-01 15:38:58 +00:00
#### extra programs to build
2014-05-10 10:16:21 +00:00
# Force this to enable building extra programs or to disable them.
# It's automatically appended depending on the targets.
EXTRA =
2008-01-02 19:48:34 +00:00
2020-03-06 08:07:38 +00:00
#### CPU dependent optimizations
2008-01-02 19:48:34 +00:00
# Some CFLAGS are set by default depending on the target CPU. Those flags only
# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use
# them. You should not have to change these options. Better use CPU_CFLAGS or
# even CFLAGS instead.
CPU_CFLAGS.generic = -O2
2010-11-28 06:41:00 +00:00
CPU_CFLAGS.native = -O2 -march= native
2008-01-02 19:48:34 +00:00
CPU_CFLAGS.i586 = -O2 -march= i586
CPU_CFLAGS.i686 = -O2 -march= i686
CPU_CFLAGS.ultrasparc = -O6 -mcpu= v9 -mtune= ultrasparc
MINOR: build: add aix72-gcc build TARGET and power{8,9} CPUs
As haproxy wont build on AIX 7.2 using the old "aix52" TARGET a new
TARGET was introduced which adds two special CFLAGS to prevent the
loading of AIXs xmem.h and var.h. This is done by defining the
corresponding include-guards _H_XMEM and _H_VAR. Without excluding
those headers-files the build fails because of redefinition errors:
1)
CC src/mux_fcgi.o
In file included from /usr/include/sys/uio.h:90,
from /opt/freeware/lib/gcc/powerpc-ibm-aix7.1.0.0/8.3.0/include-fixed/sys/socket.h:104,
from include/common/compat.h:32,
from include/common/cfgparse.h:25,
from src/mux_fcgi.c:13:
src/mux_fcgi.c:204:13: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
struct ist rem_addr;
^~~~~~~~
2)
CC src/cfgparse-listen.o
In file included from include/types/arg.h:31,
from include/types/acl.h:29,
from include/types/proxy.h:41,
from include/proto/log.h:34,
from include/common/cfgparse.h:30,
from src/mux_h2.c:13:
include/types/vars.h:30:8: error: redefinition of 'struct var'
struct var {
^~~
Futhermore, to enable multithreading via USE_THREAD, the atomic
library was added to the LDFLAGS. Finally, two new CPUs were added
to simplify the usage of power8 and power9 optimizations.
This TARGET was only tested on GCC 8.3 and may or may not work on
IBM's native C-compiler (XLC).
Should be backported to 2.1.
2020-02-10 09:29:13 +00:00
CPU_CFLAGS.power8 = -O2 -mcpu= power8 -mtune= power8
CPU_CFLAGS.power9 = -O2 -mcpu= power9 -mtune= power9
BUILD: makefile: add a few popular ARMv8 CPU targets
This adds the following CPUs to the makefile:
- armv81 : modern ARM cores (Cortex A55/A75/A76/A78/X1, Neoverse, Graviton2)
- a72 : ARM Cortex-A72 or A73 (e.g. RPi4, Odroid N2, VIM3, AWS Graviton)
- a53 : ARM Cortex-A53 or any of its successors in 64-bit mode (e.g. RPi3)
- armv8-auto: both older and newer ARMv8 cores, with a minor runtime penalty
The reasons for these ones are:
- a53 is the common denominator of all of its successors, and does
support CRC32 which is used by the gzip compression, that the generic
armv8-a does not ;
- a72 supports the same features but is an out-of-order one that deserves
better optimizations; it's found in a number of high-performance
multi-core CPUs mainly oriented towards I/O and network processing
(Armada 8040, NXP LX2160A, AWS Graviton), and more recently the
Raspberry Pi 4. The A73 found in VIM3 and Odroid-N2 can use the same
optimizations ;
- armv81 is for generic ARMv8.1-A and above, automatically enables LSE
atomics which are way more scalable, and CRC32. This one covers modern
ARMv8 cores such as Cortex A55/A75/A76/A77/A78/X1 and the Neoverse
family such as found in AWS's Graviton2. The LSE instructions are
essential for large numbers of cores (8 and above).
- armv8-auto dynamically enables support for LSE extensions when
detected while still being compatible with older cores. There is a
small performance penalty in doing this (~3%) but a same executable
will perform optimally on a wider range of hardware. This should be
the best option for distros. It requires gcc-10 or gcc-9.4 and above.
When no CPU is specified, GCC version 10.2 and above will automatically
implement the wrapper used to detect the LSE extensions.
2021-05-12 07:47:30 +00:00
CPU_CFLAGS.a53 = -O2 -mcpu= cortex-a53
CPU_CFLAGS.a72 = -O2 -mcpu= cortex-a72
CPU_CFLAGS.armv81 = -O2 -march= armv8.1-a
CPU_CFLAGS.armv8-auto = -O2 -march= armv8-a+crc -moutline-atomics
2008-01-02 19:48:34 +00:00
CPU_CFLAGS = $( CPU_CFLAGS.$( CPU) )
2020-03-06 08:07:38 +00:00
#### ARCH dependent flags, may be overridden by CPU flags
2010-11-28 06:41:00 +00:00
ARCH_FLAGS.32 = -m32
ARCH_FLAGS.64 = -m64
2009-04-11 17:45:50 +00:00
ARCH_FLAGS.i386 = -m32 -march= i386
ARCH_FLAGS.i486 = -m32 -march= i486
ARCH_FLAGS.i586 = -m32 -march= i586
ARCH_FLAGS.i686 = -m32 -march= i686
ARCH_FLAGS.x86_64 = -m64 -march= x86-64
ARCH_FLAGS = $( ARCH_FLAGS.$( ARCH) )
2008-01-02 19:48:34 +00:00
#### Common CFLAGS
# These CFLAGS contain general optimization options, CPU-specific optimizations
# and debug flags. They may be overridden by some distributions which prefer to
# set all of them at once instead of playing with the CPU and DEBUG variables.
2010-11-28 07:28:15 +00:00
CFLAGS = $( ARCH_FLAGS) $( CPU_CFLAGS) $( DEBUG_CFLAGS) $( SPEC_CFLAGS)
2008-01-02 19:48:34 +00:00
#### Common LDFLAGS
# These LDFLAGS are used as the first "ld" options, regardless of any library
# path or any other option. They may be changed to add any linker-specific
# option at the beginning of the ld command line.
2009-04-11 17:45:50 +00:00
LDFLAGS = $( ARCH_FLAGS) -g
2005-12-17 12:46:33 +00:00
2019-03-27 09:57:49 +00:00
#### list of all "USE_*" options. These ones must be updated if new options are
# added, so that the relevant options are properly added to the CFLAGS and to
# the reported build options.
2020-03-10 06:20:10 +00:00
use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER \
2019-03-27 09:57:49 +00:00
USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_POLL \
2022-07-10 08:58:57 +00:00
USE_THREAD USE_PTHREAD_EMULATION USE_BACKTRACE \
2019-03-27 09:57:49 +00:00
USE_STATIC_PCRE USE_STATIC_PCRE2 USE_TPROXY USE_LINUX_TPROXY \
2022-04-11 16:52:53 +00:00
USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \
2022-11-23 15:41:25 +00:00
USE_GETADDRINFO USE_OPENSSL USE_OPENSSL_WOLFSSL USE_LUA \
USE_ACCEPT4 USE_CLOSEFROM USE_ZLIB USE_SLZ USE_CPU_AFFINITY \
2022-12-21 10:59:33 +00:00
USE_TFO USE_NS USE_DL USE_RT USE_LIBATOMIC USE_MATH \
2022-02-14 12:05:45 +00:00
USE_DEVICEATLAS USE_51DEGREES USE_51DEGREES_V4 \
2022-11-23 15:41:25 +00:00
USE_WURFL USE_SYSTEMD USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL \
USE_THREAD_DUMP USE_EVPORTS USE_OT USE_QUIC USE_PROMEX \
USE_MEMORY_PROFILING USE_SHM_OPEN
2019-03-27 09:57:49 +00:00
BUILD: makefile: initialize all build options' variables at once
A lot of _SRC, _INC, _LIB etc variables are set and expected to be
initialized to an empty string by default. However, an in-depth
review of all of them showed that WOLFSSL_{INC,LIB}, SSL_{INC,LIB},
LUA_{INC,LIB}, and maybe others were not always initialized and could
sometimes leak from the environment and as such cause strange build
issues when running from cascaded scripts that had exported them.
The approach taken here consists in iterating over all USE_* options
and unsetting any _SRC, _INC, _LIB, _CFLAGS and _LDFLAGS that follows
the same name. For the few variable names options that don't exactly
match the build option (SSL & WOLFSSL), these ones are specifically
added to the list. The few that were explicitly cleared in their own
sections were just removed since not needed anymore. Note that an
"undefine" command appeared in GNU make 3.82 but since we support
older ones we can only initialize the variables to an empty string
here. It's not a problem in practice.
We're now certain that these variables are empty wherever they are
used, and that it is possible to just append to them, or use them
as-is.
2022-12-22 14:47:47 +00:00
# preset all variables for all supported build options among use_opts
$( reset_opts_vars )
2008-01-02 19:48:34 +00:00
#### Target system options
2019-03-27 09:57:49 +00:00
# poll() is always supported, unless explicitly disabled by passing USE_POLL=""
# on the make command line.
2013-04-02 06:14:29 +00:00
USE_POLL = default
2021-04-22 12:14:22 +00:00
# SLZ is always supported unless explicitly disabled by passing USE_SLZ=""
# or disabled by enabling ZLIB using USE_ZLIB=1
i f e q ( $( USE_ZLIB ) , )
2022-12-21 14:49:56 +00:00
USE_SLZ = default
2021-04-22 12:14:22 +00:00
e n d i f
2019-03-27 10:44:19 +00:00
# generic system target has nothing specific
2008-01-02 19:48:34 +00:00
i f e q ( $( TARGET ) , g e n e r i c )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts,USE_POLL USE_TPROXY)
2019-03-27 10:44:19 +00:00
e n d i f
# Haiku
2015-10-19 23:01:16 +00:00
i f e q ( $( TARGET ) , h a i k u )
TARGET_LDFLAGS = -lnetwork
2021-06-19 14:42:43 +00:00
set_target_defaults = $( call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
2019-03-27 10:44:19 +00:00
e n d i f
2019-06-14 14:32:09 +00:00
# For linux >= 2.6.28 and glibc
i f e q ( $( TARGET ) , l i n u x - g l i b c )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2019-03-27 10:30:47 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
2021-06-15 14:11:33 +00:00
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \
2019-06-14 16:33:56 +00:00
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
2022-09-26 10:54:39 +00:00
USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN)
2022-07-16 09:18:50 +00:00
INSTALL = install -v
2019-03-27 10:44:19 +00:00
e n d i f
2019-09-01 14:48:36 +00:00
# For linux >= 2.6.28, glibc without new features
i f e q ( $( TARGET ) , l i n u x - g l i b c - l e g a c y )
set_target_defaults = $( call default_opts, \
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
2021-06-15 14:11:33 +00:00
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \
2019-09-01 14:48:36 +00:00
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO)
2022-07-16 09:18:50 +00:00
INSTALL = install -v
2019-09-01 14:48:36 +00:00
e n d i f
2020-04-16 13:14:17 +00:00
# For linux >= 2.6.28 and musl
i f e q ( $( TARGET ) , l i n u x - m u s l )
set_target_defaults = $( call default_opts, \
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
2021-06-15 14:11:33 +00:00
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY \
2020-04-16 13:14:17 +00:00
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
2022-10-21 08:35:37 +00:00
USE_GETADDRINFO USE_SHM_OPEN)
2022-07-16 09:18:50 +00:00
INSTALL = install -v
2020-04-16 13:14:17 +00:00
e n d i f
2020-09-30 19:46:16 +00:00
# Solaris 10 and above
2008-01-02 19:48:34 +00:00
i f e q ( $( TARGET ) , s o l a r i s )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2019-05-21 09:12:03 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \
2020-09-30 19:46:16 +00:00
USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM)
2022-01-13 19:16:48 +00:00
TARGET_CFLAGS = -DFD_SETSIZE= 65536 -D_REENTRANT -D_XOPEN_SOURCE= 600 -D__EXTENSIONS__
2008-01-02 19:48:34 +00:00
TARGET_LDFLAGS = -lnsl -lsocket
2019-03-27 10:44:19 +00:00
e n d i f
2020-09-15 07:10:04 +00:00
# FreeBSD 10 and above
2008-01-02 19:48:34 +00:00
i f e q ( $( TARGET ) , f r e e b s d )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2019-03-27 10:30:47 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
2022-11-18 14:22:51 +00:00
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL USE_SHM_OPEN)
2019-03-27 10:44:19 +00:00
e n d i f
2022-03-04 15:50:48 +00:00
# kFreeBSD glibc
i f e q ( $( TARGET ) , f r e e b s d - g l i b c )
set_target_defaults = $( call default_opts, \
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL)
e n d i f
2020-10-08 05:15:06 +00:00
# DragonFlyBSD 4.3 and above
i f e q ( $( TARGET ) , d r a g o n f l y )
set_target_defaults = $( call default_opts, \
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO)
e n d i f
2019-03-27 10:44:19 +00:00
# Mac OS/X
2013-04-02 06:17:43 +00:00
i f e q ( $( TARGET ) , o s x )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2020-10-09 23:26:23 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
USE_GETADDRINFO)
2018-03-05 14:37:04 +00:00
EXPORT_SYMBOL = -export_dynamic
2019-03-27 10:44:19 +00:00
e n d i f
2020-09-27 03:05:25 +00:00
# OpenBSD 6.3 and above
2008-01-02 19:48:34 +00:00
i f e q ( $( TARGET ) , o p e n b s d )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2020-11-20 09:50:39 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
USE_CLOSEFROM USE_GETADDRINFO)
2019-03-27 10:44:19 +00:00
e n d i f
2020-10-08 20:24:52 +00:00
# NetBSD 8 and above
2015-07-02 06:58:22 +00:00
i f e q ( $( TARGET ) , n e t b s d )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2022-08-13 04:57:31 +00:00
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
USE_CLOSEFROM USE_GETADDRINFO)
2019-03-27 10:44:19 +00:00
e n d i f
# AIX 5.1 only
2014-04-02 18:44:43 +00:00
i f e q ( $( TARGET ) , a i x 5 1 )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2021-06-15 14:11:33 +00:00
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
2019-03-29 17:56:00 +00:00
TARGET_CFLAGS = -Dss_family= __ss_family -Dip6_hdr= ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv= my_unsetenv
2014-04-02 18:44:43 +00:00
DEBUG_CFLAGS =
2019-03-27 10:44:19 +00:00
e n d i f
MINOR: build: add aix72-gcc build TARGET and power{8,9} CPUs
As haproxy wont build on AIX 7.2 using the old "aix52" TARGET a new
TARGET was introduced which adds two special CFLAGS to prevent the
loading of AIXs xmem.h and var.h. This is done by defining the
corresponding include-guards _H_XMEM and _H_VAR. Without excluding
those headers-files the build fails because of redefinition errors:
1)
CC src/mux_fcgi.o
In file included from /usr/include/sys/uio.h:90,
from /opt/freeware/lib/gcc/powerpc-ibm-aix7.1.0.0/8.3.0/include-fixed/sys/socket.h:104,
from include/common/compat.h:32,
from include/common/cfgparse.h:25,
from src/mux_fcgi.c:13:
src/mux_fcgi.c:204:13: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
struct ist rem_addr;
^~~~~~~~
2)
CC src/cfgparse-listen.o
In file included from include/types/arg.h:31,
from include/types/acl.h:29,
from include/types/proxy.h:41,
from include/proto/log.h:34,
from include/common/cfgparse.h:30,
from src/mux_h2.c:13:
include/types/vars.h:30:8: error: redefinition of 'struct var'
struct var {
^~~
Futhermore, to enable multithreading via USE_THREAD, the atomic
library was added to the LDFLAGS. Finally, two new CPUs were added
to simplify the usage of power8 and power9 optimizations.
This TARGET was only tested on GCC 8.3 and may or may not work on
IBM's native C-compiler (XLC).
Should be backported to 2.1.
2020-02-10 09:29:13 +00:00
# AIX 5.2
2012-06-06 14:15:03 +00:00
i f e q ( $( TARGET ) , a i x 5 2 )
2019-03-29 19:55:54 +00:00
set_target_defaults = $( call default_opts, \
2019-03-29 20:30:17 +00:00
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
2012-06-06 14:15:03 +00:00
TARGET_CFLAGS = -D_MSGQSUPPORT
DEBUG_CFLAGS =
2019-03-27 10:44:19 +00:00
e n d i f
MINOR: build: add aix72-gcc build TARGET and power{8,9} CPUs
As haproxy wont build on AIX 7.2 using the old "aix52" TARGET a new
TARGET was introduced which adds two special CFLAGS to prevent the
loading of AIXs xmem.h and var.h. This is done by defining the
corresponding include-guards _H_XMEM and _H_VAR. Without excluding
those headers-files the build fails because of redefinition errors:
1)
CC src/mux_fcgi.o
In file included from /usr/include/sys/uio.h:90,
from /opt/freeware/lib/gcc/powerpc-ibm-aix7.1.0.0/8.3.0/include-fixed/sys/socket.h:104,
from include/common/compat.h:32,
from include/common/cfgparse.h:25,
from src/mux_fcgi.c:13:
src/mux_fcgi.c:204:13: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
struct ist rem_addr;
^~~~~~~~
2)
CC src/cfgparse-listen.o
In file included from include/types/arg.h:31,
from include/types/acl.h:29,
from include/types/proxy.h:41,
from include/proto/log.h:34,
from include/common/cfgparse.h:30,
from src/mux_h2.c:13:
include/types/vars.h:30:8: error: redefinition of 'struct var'
struct var {
^~~
Futhermore, to enable multithreading via USE_THREAD, the atomic
library was added to the LDFLAGS. Finally, two new CPUs were added
to simplify the usage of power8 and power9 optimizations.
This TARGET was only tested on GCC 8.3 and may or may not work on
IBM's native C-compiler (XLC).
Should be backported to 2.1.
2020-02-10 09:29:13 +00:00
# AIX 7.2 and above
i f e q ( $( TARGET ) , a i x 7 2 - g c c )
set_target_defaults = $( call default_opts, \
USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO)
TARGET_CFLAGS = -D_H_XMEM -D_H_VAR
2022-12-21 09:46:07 +00:00
USE_LIBATOMIC = implicit
MINOR: build: add aix72-gcc build TARGET and power{8,9} CPUs
As haproxy wont build on AIX 7.2 using the old "aix52" TARGET a new
TARGET was introduced which adds two special CFLAGS to prevent the
loading of AIXs xmem.h and var.h. This is done by defining the
corresponding include-guards _H_XMEM and _H_VAR. Without excluding
those headers-files the build fails because of redefinition errors:
1)
CC src/mux_fcgi.o
In file included from /usr/include/sys/uio.h:90,
from /opt/freeware/lib/gcc/powerpc-ibm-aix7.1.0.0/8.3.0/include-fixed/sys/socket.h:104,
from include/common/compat.h:32,
from include/common/cfgparse.h:25,
from src/mux_fcgi.c:13:
src/mux_fcgi.c:204:13: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
struct ist rem_addr;
^~~~~~~~
2)
CC src/cfgparse-listen.o
In file included from include/types/arg.h:31,
from include/types/acl.h:29,
from include/types/proxy.h:41,
from include/proto/log.h:34,
from include/common/cfgparse.h:30,
from src/mux_h2.c:13:
include/types/vars.h:30:8: error: redefinition of 'struct var'
struct var {
^~~
Futhermore, to enable multithreading via USE_THREAD, the atomic
library was added to the LDFLAGS. Finally, two new CPUs were added
to simplify the usage of power8 and power9 optimizations.
This TARGET was only tested on GCC 8.3 and may or may not work on
IBM's native C-compiler (XLC).
Should be backported to 2.1.
2020-02-10 09:29:13 +00:00
e n d i f
2019-03-27 10:44:19 +00:00
# Cygwin
2009-06-14 16:27:54 +00:00
i f e q ( $( TARGET ) , c y g w i n )
2019-03-29 20:30:17 +00:00
set_target_defaults = $( call default_opts, \
USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
2021-01-08 04:35:52 +00:00
# Cygwin adds IPv6 support only in version 1.7 (in beta right now).
2009-06-14 16:27:54 +00:00
TARGET_CFLAGS = $( if $( filter 1.5.%, $( shell uname -r) ) , -DUSE_IPV6 -DAF_INET6= 23 -DINET6_ADDRSTRLEN= 46, )
2019-03-27 10:44:19 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
2019-03-29 19:55:54 +00:00
# set the default settings according to the target above
$( set_target_defaults )
2021-11-14 14:28:38 +00:00
# Some architectures require to link with libatomic for atomics of certain
# sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value
# 2 indicates that the builtin is native thus doesn't require libatomic. Hence
# any occurrence of 1 indicates libatomic is necessary. It's better to avoid
# linking with it by default as it's not always available nor deployed
# (especially on archs which do not need it).
i f n e q ( $( USE_THREAD ) , )
2022-12-21 14:49:56 +00:00
ifneq ( $( shell $( CC) $( CFLAGS) -dM -E -xc - </dev/null 2>/dev/null | grep -c 'LOCK_FREE.*1' ) ,0)
USE_LIBATOMIC = implicit
endif
2021-11-14 14:28:38 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
#### Determine version, sub-version and release date.
# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
# extracted from the last commit. Otherwise, use the contents of the files
# holding the same names in the current directory.
2005-12-18 00:02:42 +00:00
2007-01-01 23:44:53 +00:00
i f e q ( $( IGNOREGIT ) , )
2022-12-21 14:49:56 +00:00
VERSION := $( shell [ -d .git/. ] && ( git describe --tags --match 'v*' --abbrev= 0 | cut -c 2-) 2>/dev/null)
ifneq ( $( VERSION) ,)
# OK git is there and works.
SUBVERS := $( shell comms = ` git log --format= oneline --no-merges v$( VERSION) .. 2>/dev/null | wc -l | tr -d '[:space:]' ` ; commit = ` ( git log -1 --pretty= %h --abbrev= 6) 2>/dev/null` ; [ $$ comms -gt 0 ] && echo " - $$ commit- $$ comms " )
VERDATE := $( shell git log -1 --pretty= format:%ci | cut -f1 -d' ' | tr '-' '/' )
endif
2007-09-09 21:31:11 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
# Last commit version not found, take it from the files.
2007-09-09 21:31:11 +00:00
i f e q ( $( VERSION ) , )
2022-12-21 14:49:56 +00:00
VERSION := $( shell cat VERSION 2>/dev/null || touch VERSION)
2007-09-09 21:31:11 +00:00
e n d i f
i f e q ( $( SUBVERS ) , )
2022-12-21 14:49:56 +00:00
SUBVERS := $( shell ( grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
2007-09-09 21:31:11 +00:00
e n d i f
i f e q ( $( VERDATE ) , )
2022-12-21 14:49:56 +00:00
VERDATE := $( shell ( grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/' )
2006-12-23 10:12:04 +00:00
e n d i f
2006-11-12 22:57:19 +00:00
2020-10-01 02:05:39 +00:00
# this one is always empty by default and appended verbatim
EXTRAVERSION =
2008-01-02 19:48:34 +00:00
#### Build options
# Do not change these ones, enable USE_* variables instead.
OPTIONS_CFLAGS =
OPTIONS_LDFLAGS =
OPTIONS_OBJS =
2019-01-10 09:01:03 +00:00
#### Extra objects to be built and integrated (used only for development)
EXTRA_OBJS =
2019-03-27 09:57:49 +00:00
# This variable collects all USE_* values except those set to "implicit". This
# is used to report a list of all flags which were used to build this version.
# Do not assign anything to it.
2022-12-22 18:32:24 +00:00
BUILD_OPTIONS := $( call build_options)
2019-03-27 09:57:49 +00:00
2019-03-27 13:44:14 +00:00
# All USE_* options have their equivalent macro defined in the code (some might
# possibly be unused though)
2022-12-22 18:32:24 +00:00
OPTIONS_CFLAGS += $( call opts_as_defines)
2019-03-27 13:44:14 +00:00
2010-01-29 16:50:44 +00:00
i f n e q ( $( USE_LIBCRYPT ) , )
2022-12-21 14:49:56 +00:00
ifneq ( $( TARGET) ,openbsd)
ifneq ( $( TARGET) ,osx)
2022-12-21 15:14:11 +00:00
LIBCRYPT_LDFLAGS = -lcrypt
2022-12-21 14:49:56 +00:00
endif
endif
2019-09-01 13:59:10 +00:00
e n d i f
2010-01-29 16:50:44 +00:00
MEDIUM: HTTP compression (zlib library support)
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
2012-10-23 08:25:10 +00:00
i f n e q ( $( USE_ZLIB ) , )
2022-12-21 14:49:56 +00:00
# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
OPTIONS_CFLAGS += $( if $( ZLIB_INC) ,-I$( ZLIB_INC) )
OPTIONS_LDFLAGS += $( if $( ZLIB_LIB) ,-L$( ZLIB_LIB) ) -lz
MEDIUM: HTTP compression (zlib library support)
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
2012-10-23 08:25:10 +00:00
e n d i f
2021-04-22 12:14:22 +00:00
i f n e q ( $( USE_SLZ ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/slz.o
2021-04-22 12:14:22 +00:00
e n d i f
2006-11-12 22:57:19 +00:00
i f n e q ( $( USE_POLL ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/ev_poll.o
2006-11-12 22:57:19 +00:00
e n d i f
i f n e q ( $( USE_EPOLL ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/ev_epoll.o
2006-11-12 22:57:19 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
i f n e q ( $( USE_KQUEUE ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/ev_kqueue.o
2006-11-12 22:57:19 +00:00
e n d i f
2019-04-08 16:53:32 +00:00
i f n e q ( $( USE_EVPORTS ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/ev_evports.o
2019-04-08 16:53:32 +00:00
e n d i f
2018-10-18 14:28:54 +00:00
i f n e q ( $( USE_RT ) , )
2022-12-21 15:16:36 +00:00
RT_LDFLAGS = -lrt
2018-10-18 14:28:54 +00:00
e n d i f
2020-03-04 07:31:47 +00:00
i f n e q ( $( USE_THREAD ) , )
2022-12-21 15:17:40 +00:00
THREAD_LDFLAGS = -lpthread
2020-03-04 07:31:47 +00:00
e n d i f
2020-03-03 14:40:23 +00:00
i f n e q ( $( USE_BACKTRACE ) , )
2022-12-21 15:18:40 +00:00
BACKTRACE_LDFLAGS = -Wl,$( if $( EXPORT_SYMBOL) ,$( EXPORT_SYMBOL) ,--export-dynamic)
2020-03-03 14:40:23 +00:00
e n d i f
2021-04-14 13:03:51 +00:00
i f n e q ( $( USE_CPU_AFFINITY ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/cpuset.o
2021-04-14 13:03:51 +00:00
e n d i f
2012-05-18 13:48:30 +00:00
i f n e q ( $( USE_OPENSSL ) , )
2022-12-21 14:49:56 +00:00
# OpenSSL is packaged in various forms and with various dependencies.
# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
# reason why it's added by default. Some even need -lz, then you'll need to
# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
ifeq ( $( USE_OPENSSL_WOLFSSL) ,)
OPTIONS_CFLAGS += $( if $( SSL_INC) ,-I$( SSL_INC) )
OPTIONS_LDFLAGS += $( if $( SSL_LIB) ,-L$( SSL_LIB) ) -lssl -lcrypto
endif
OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_sample.o src/ssl_crtlist.o src/cfgparse-ssl.o src/ssl_utils.o src/jwt.o src/ssl_ocsp.o
2017-11-02 15:00:51 +00:00
e n d i f
2022-04-11 14:31:31 +00:00
2022-11-23 15:41:25 +00:00
i f n e q ( $( USE_OPENSSL_WOLFSSL ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_CFLAGS += $( if $( WOLFSSL_INC) ,-I$( WOLFSSL_INC) -I$( WOLFSSL_INC) /wolfssl)
OPTIONS_LDFLAGS += $( if $( WOLFSSL_LIB) ,-L$( WOLFSSL_LIB) ) -lwolfssl
2022-11-23 15:41:25 +00:00
e n d i f
2022-04-11 14:31:31 +00:00
i f n e q ( $( USE_ENGINE ) , )
2022-12-21 14:49:56 +00:00
# OpenSSL 3.0 emits loud deprecation warnings by default when building with
# engine support, and this option is made to silence them. Better use it
# only when absolutely necessary, until there's a viable alternative to the
# engine API.
OPTIONS_CFLAGS += -DOPENSSL_SUPPRESS_DEPRECATED
2022-04-11 14:31:31 +00:00
e n d i f
2020-11-23 14:53:17 +00:00
i f n e q ( $( USE_QUIC ) , )
2022-11-24 07:57:13 +00:00
OPTIONS_OBJS += src/quic_conn.o src/mux_quic.o src/h3.o src/xprt_quic.o \
src/quic_frame.o src/quic_tls.o src/quic_tp.o \
src/quic_stats.o src/quic_sock.o src/proto_quic.o \
src/qmux_trace.o src/quic_loss.o src/qpack-enc.o \
src/quic_cc_newreno.o src/quic_cc_cubic.o src/qpack-tbl.o \
src/qpack-dec.o src/hq_interop.o src/quic_stream.o \
src/h3_stats.o src/qmux_http.o src/cfgparse-quic.o \
src/cbuf.o src/quic_cc.o
2020-11-23 14:53:17 +00:00
e n d i f
2017-11-02 15:00:51 +00:00
2015-01-23 13:06:13 +00:00
i f n e q ( $( USE_LUA ) , )
2022-12-21 14:49:56 +00:00
check_lua_inc = $( shell if [ -d $( 2) $( 1) ] ; then echo $( 2) $( 1) ; fi ; )
LUA_INC := $( firstword $( foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$( call check_lua_inc,$( lib) ,"/usr/include/" ) ) )
OPTIONS_CFLAGS += $( if $( LUA_INC) ,-I$( LUA_INC) )
check_lua_lib = $( shell echo "int main(){}" | $( CC) -o /dev/null -x c - $( 2) -l$( 1) 2>/dev/null && echo $( 1) )
LUA_LIB =
LUA_LD_FLAGS := -Wl,$( if $( EXPORT_SYMBOL) ,$( EXPORT_SYMBOL) ,--export-dynamic) $( if $( LUA_LIB) ,-L$( LUA_LIB) )
# Try to automatically detect the Lua library if not set
ifeq ( $( LUA_LIB_NAME) ,)
LUA_LIB_NAME := $( firstword $( foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$( call check_lua_lib,$( lib) ,$( LUA_LD_FLAGS) ) ) )
endif
# Lua lib name must be set now (forced/detected above)
ifeq ( $( LUA_LIB_NAME) ,)
$( error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME = <name> ( where <name> can be lua5.4, lua54, lua, ...) )
endif
ifneq ( $( HLUA_PREPEND_PATH) ,)
OPTIONS_CFLAGS += -DHLUA_PREPEND_PATH= $( HLUA_PREPEND_PATH)
BUILD_OPTIONS += HLUA_PREPEND_PATH = $( HLUA_PREPEND_PATH)
endif # HLUA_PREPEND_PATH
ifneq ( $( HLUA_PREPEND_CPATH) ,)
OPTIONS_CFLAGS += -DHLUA_PREPEND_CPATH= $( HLUA_PREPEND_CPATH)
BUILD_OPTIONS += HLUA_PREPEND_CPATH = $( HLUA_PREPEND_CPATH)
endif # HLUA_PREPEND_CPATH
USE_MATH = implicit
OPTIONS_LDFLAGS += $( LUA_LD_FLAGS) -l$( LUA_LIB_NAME)
OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o
2022-12-15 10:55:51 +00:00
e n d i f # USE_LUA
2015-01-23 13:06:13 +00:00
2021-04-02 13:31:10 +00:00
i f n e q ( $( USE_PROMEX ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += addons/promex/service-prometheus.o
2021-04-02 13:31:10 +00:00
e n d i f
2015-06-01 12:00:07 +00:00
i f n e q ( $( USE_DEVICEATLAS ) , )
2022-12-21 14:49:56 +00:00
# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
# to DeviceAtlas headers and libraries if needed.
DEVICEATLAS_INC = $( DEVICEATLAS_SRC)
DEVICEATLAS_LIB = $( DEVICEATLAS_SRC)
ifeq ( $( DEVICEATLAS_SRC) ,)
OPTIONS_LDFLAGS += -lda
else
ifeq ( $( USE_PCRE) ,)
ifeq ( $( USE_PCRE2) ,)
$( error the DeviceAtlas module needs the PCRE or the PCRE2 library in order to compile)
endif
endif
ifneq ( $( USE_PCRE2) ,)
OPTIONS_CFLAGS += -DDA_REGEX_HDR= \" dac_pcre2.c\" -DDA_REGEX_TAG= 2
endif
OPTIONS_OBJS += $( DEVICEATLAS_LIB) /Os/daunix.o
OPTIONS_OBJS += $( DEVICEATLAS_LIB) /dadwcom.o
OPTIONS_OBJS += $( DEVICEATLAS_LIB) /dasch.o
OPTIONS_OBJS += $( DEVICEATLAS_LIB) /json.o
OPTIONS_OBJS += $( DEVICEATLAS_LIB) /dac.o
endif
OPTIONS_OBJS += addons/deviceatlas/da.o
OPTIONS_CFLAGS += $( if $( DEVICEATLAS_INC) ,-I$( DEVICEATLAS_INC) )
2015-06-01 12:00:07 +00:00
e n d i f
2022-12-21 14:23:04 +00:00
# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
# to 51degrees v3/v4 headers and libraries if needed.
51DEGREES_INC = $( 51DEGREES_SRC)
51DEGREES_LIB = $( 51DEGREES_SRC)
i f n e q ( $( USE_ 51DEGREES_V 4) , ) # v4 here
ifneq ( $( USE_51DEGREES) ,)
2022-12-21 14:49:56 +00:00
$( error cannot compile both 51Degrees V3 and V4 engine support)
endif
2022-12-21 14:23:04 +00:00
_51DEGREES_SRC = $( shell find $( 51DEGREES_LIB) -maxdepth 2 -name '*.c' )
OPTIONS_OBJS += $( _51DEGREES_SRC:%.c= %.o)
OPTIONS_CFLAGS += -DUSE_51DEGREES_V4
ifeq ( $( USE_THREAD) ,)
OPTIONS_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING -DFIFTYONE_DEGREES_NO_THREADING
2022-12-21 14:49:56 +00:00
endif
OPTIONS_OBJS += addons/51degrees/51d.o
OPTIONS_CFLAGS += $( if $( 51DEGREES_INC) ,-I$( 51DEGREES_INC) )
2022-12-21 14:23:04 +00:00
OPTIONS_LDFLAGS += $( if $( 51DEGREES_LIB) ,-L$( 51DEGREES_LIB) )
USE_ATOMIC = implicit
USE_MATH = implicit
e n d i f # USE_51DEGREES_V4
i f n e q ( $( USE_ 51DEGREES ) , ) # v3 here
OPTIONS_OBJS += $( 51DEGREES_LIB) /../cityhash/city.o
OPTIONS_OBJS += $( 51DEGREES_LIB) /51Degrees.o
2022-12-21 14:49:56 +00:00
ifeq ( $( USE_THREAD) ,)
OPTIONS_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING
2022-12-21 14:23:04 +00:00
else
OPTIONS_OBJS += $( 51DEGREES_LIB) /../threading.o
2022-12-21 14:49:56 +00:00
endif
2022-12-21 14:23:04 +00:00
OPTIONS_OBJS += addons/51degrees/51d.o
OPTIONS_CFLAGS += $( if $( 51DEGREES_INC) ,-I$( 51DEGREES_INC) )
2022-12-21 14:49:56 +00:00
OPTIONS_LDFLAGS += $( if $( 51DEGREES_LIB) ,-L$( 51DEGREES_LIB) )
USE_MATH = implicit
2022-12-21 14:23:04 +00:00
e n d i f # USE_51DEGREES
2015-05-12 14:06:21 +00:00
2019-04-19 14:03:32 +00:00
i f n e q ( $( USE_WURFL ) , )
2022-12-21 14:49:56 +00:00
# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path
# to WURFL headers and libraries if needed.
WURFL_INC = $( WURFL_SRC)
WURFL_LIB = $( WURFL_SRC)
OPTIONS_OBJS += addons/wurfl/wurfl.o
OPTIONS_CFLAGS += $( if $( WURFL_INC) ,-I$( WURFL_INC) )
ifneq ( $( WURFL_DEBUG) ,)
OPTIONS_CFLAGS += -DWURFL_DEBUG
endif
ifneq ( $( WURFL_HEADER_WITH_DETAILS) ,)
OPTIONS_CFLAGS += -DWURFL_HEADER_WITH_DETAILS
endif
OPTIONS_LDFLAGS += $( if $( WURFL_LIB) ,-L$( WURFL_LIB) ) -lwurfl
2019-04-19 14:03:32 +00:00
e n d i f
2017-11-20 14:58:35 +00:00
i f n e q ( $( USE_SYSTEMD ) , )
2022-12-21 15:19:22 +00:00
SYSTEMD_LDFLAGS = -lsystemd
2017-11-20 14:58:35 +00:00
e n d i f
2013-01-13 06:00:42 +00:00
i f n e q ( $( USE_PCRE ) $( USE_STATIC_PCRE ) $( USE_PCRE_JIT ) , )
2022-12-21 14:49:56 +00:00
ifneq ( $( USE_PCRE2) $( USE_STATIC_PCRE2) $( USE_PCRE2_JIT) ,)
$( error cannot compile both PCRE and PCRE2 support)
endif
# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
# by appending /include and /lib respectively. If your system does not use the
# same sub-directories, simply force these variables instead of PCREDIR. It is
# automatically detected but can be forced if required (for cross-compiling).
# Forcing PCREDIR to an empty string will let the compiler use the default
# locations.
# in case only USE_STATIC_PCRE/USE_PCRE_JIT were set
USE_PCRE := $( if $( USE_PCRE) ,$( USE_PCRE) ,implicit)
PCRE_CONFIG := pcre-config
PCREDIR := $( shell $( PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local)
ifneq ( $( PCREDIR) ,)
PCRE_INC := $( PCREDIR) /include
PCRE_LIB := $( PCREDIR) /lib
endif
ifeq ( $( USE_STATIC_PCRE) ,)
# dynamic PCRE
OPTIONS_CFLAGS += $( if $( PCRE_INC) ,-I$( PCRE_INC) )
OPTIONS_LDFLAGS += $( if $( PCRE_LIB) ,-L$( PCRE_LIB) ) -lpcreposix -lpcre
else
# static PCRE
OPTIONS_CFLAGS += $( if $( PCRE_INC) ,-I$( PCRE_INC) )
OPTIONS_LDFLAGS += $( if $( PCRE_LIB) ,-L$( PCRE_LIB) ) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
endif
e n d i f # USE_PCRE
2006-11-12 22:57:19 +00:00
2016-11-21 21:25:58 +00:00
i f n e q ( $( USE_PCRE 2) $( USE_STATIC_PCRE 2) $( USE_PCRE 2_JIT ) , )
2022-12-21 14:49:56 +00:00
# in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set
USE_PCRE2 := $( if $( USE_PCRE2) ,$( USE_PCRE2) ,implicit)
PCRE2_CONFIG := pcre2-config
PCRE2DIR := $( shell $( PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local)
ifneq ( $( PCRE2DIR) ,)
PCRE2_INC := $( PCRE2DIR) /include
PCRE2_LIB := $( PCRE2DIR) /lib
ifeq ( $( PCRE2_WIDTH) ,)
PCRE2_WIDTH = 8
endif
ifneq ( $( PCRE2_WIDTH) ,8)
ifneq ( $( PCRE2_WIDTH) ,16)
ifneq ( $( PCRE2_WIDTH) ,32)
$( error PCRE2_WIDTH needs to be set to either 8,16 or 32)
endif
endif
endif
PCRE2_LDFLAGS := $( shell $( PCRE2_CONFIG) --libs$( PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$( PCRE2_WIDTH) )
ifeq ( $( PCRE2_LDFLAGS) ,)
$( error libpcre2-$( PCRE2_WIDTH) not found)
else
ifeq ( $( PCRE2_WIDTH) ,8)
PCRE2_LDFLAGS += -lpcre2-posix
endif
endif
OPTIONS_CFLAGS += -DPCRE2_CODE_UNIT_WIDTH= $( PCRE2_WIDTH)
OPTIONS_CFLAGS += $( if $( PCRE2_INC) , -I$( PCRE2_INC) )
ifneq ( $( USE_STATIC_PCRE2) ,)
PCRE2_LDFLAGS := $( if $( PCRE2_LIB) ,-L$( PCRE2_LIB) ) -Wl,-Bstatic -L$( PCRE2_LIB) $( PCRE2_LDFLAGS) -Wl,-Bdynamic
else
PCRE2_LDFLAGS := $( if $( PCRE2_LIB) ,-L$( PCRE2_LIB) ) -L$( PCRE2_LIB) $( PCRE2_LDFLAGS)
endif
endif # PCRE2DIR
e n d i f # USE_PCRE2
2016-11-21 21:25:58 +00:00
2022-12-22 16:58:24 +00:00
i f n e q ( $( USE_NS ) , )
2022-12-21 14:49:56 +00:00
OPTIONS_OBJS += src/namespace.o
2022-12-22 16:58:24 +00:00
e n d i f
i f n e q ( $( USE_OT ) , )
2022-12-21 14:49:56 +00:00
include addons/ot/Makefile
2022-12-22 16:58:24 +00:00
e n d i f
2022-12-14 17:46:48 +00:00
# better keep this one close to the end, as several libs above may need it
i f n e q ( $( USE_DL ) , )
DL_LDFLAGS = -ldl
e n d i f
2022-12-21 10:59:33 +00:00
i f n e q ( $( USE_MATH ) , )
MATH_LDFLAGS = -lm
e n d i f
2022-12-22 16:58:24 +00:00
i f n e q ( $( USE_LIBATOMIC ) , )
2022-12-21 09:46:07 +00:00
LIBATOMIC_LDFLAGS = -latomic
2022-12-22 16:58:24 +00:00
e n d i f
#### End of the USE_* options handling, any such option that would be added
#### below could be silently ignored.
2022-12-22 17:24:46 +00:00
# appends all foo_{C,LD}FLAGS to OPTIONS_{C,LD}FLAGS
$( collect_opts_flags )
2008-01-02 19:48:34 +00:00
#### Global compile options
VERBOSE_CFLAGS = $( CFLAGS) $( TARGET_CFLAGS) $( SMALL_OPTS) $( DEFINE)
2020-05-27 09:05:33 +00:00
COPTS = -Iinclude
2018-10-22 04:22:46 +00:00
2008-01-02 19:48:34 +00:00
COPTS += $( CFLAGS) $( TARGET_CFLAGS) $( SMALL_OPTS) $( DEFINE) $( SILENT_DEFINE)
COPTS += $( DEBUG) $( OPTIONS_CFLAGS) $( ADDINC)
2005-12-17 13:08:03 +00:00
2020-10-01 02:05:39 +00:00
i f n e q ( $( VERSION ) $( SUBVERS ) $( EXTRAVERSION ) , )
2022-12-21 14:49:56 +00:00
COPTS += -DCONFIG_HAPROXY_VERSION= \" $( VERSION) $( SUBVERS) $( EXTRAVERSION) \"
2008-01-02 19:48:34 +00:00
e n d i f
2007-01-07 01:03:04 +00:00
2008-01-02 19:48:34 +00:00
i f n e q ( $( VERDATE ) , )
2022-12-21 14:49:56 +00:00
COPTS += -DCONFIG_HAPROXY_DATE= \" $( VERDATE) \"
2007-01-07 01:03:04 +00:00
e n d i f
2012-05-25 21:53:16 +00:00
i f n e q ( $( TRACE ) , )
2022-12-21 14:49:56 +00:00
# if tracing is enabled, we want it to be as fast as possible
TRACE_COPTS := $( filter-out -O0 -O1 -O2 -pg -finstrument-functions,$( COPTS) ) -O3 -fomit-frame-pointer
COPTS += -finstrument-functions
2012-05-25 21:53:16 +00:00
e n d i f
2008-01-02 19:48:34 +00:00
#### Global link options
# These options are added at the end of the "ld" command line. Use LDFLAGS to
# add options at the beginning of the "ld" command line if needed.
LDOPTS = $( TARGET_LDFLAGS) $( OPTIONS_LDFLAGS) $( ADDLIB)
2005-12-17 11:29:56 +00:00
2008-03-11 05:37:39 +00:00
i f e q ( $( TARGET ) , )
all :
2021-01-05 17:10:41 +00:00
@echo "Building HAProxy without specifying a TARGET is not supported."
2008-03-11 05:37:39 +00:00
@echo
2021-01-05 17:10:41 +00:00
@echo "Usage:"
2008-03-11 05:37:39 +00:00
@echo
2021-01-05 17:10:41 +00:00
@echo " $ make help # To print a full explanation. "
@echo " $ make TARGET=xxx USE_<feature>=1 # To build HAProxy. "
2008-03-11 05:37:39 +00:00
@echo
2021-01-05 17:10:41 +00:00
@echo "The most commonly used targets are:"
2008-03-11 05:37:39 +00:00
@echo
2021-01-05 17:10:41 +00:00
@echo " linux-glibc - Modern Linux with glibc"
@echo " linux-musl - Modern Linux with musl"
@echo " freebsd - FreeBSD"
@echo " openbsd - OpenBSD"
@echo " netbsd - NetBSD"
@echo " osx - macOS"
@echo " solaris - Solaris"
2008-03-11 05:37:39 +00:00
@echo
2021-01-05 17:10:41 +00:00
@echo "Choose the target which matches your OS the most in order to"
@echo "gain the maximum performance out of it."
@echo
@echo "Common features you might want to include in your build are:"
@echo
@echo " USE_OPENSSL=1 - Support for TLS encrypted connections"
@echo " USE_ZLIB=1 - Support for HTTP response compression"
@echo " USE_PCRE=1 - Support for PCRE regular expressions"
@echo " USE_LUA=1 - Support for dynamic processing using Lua"
@echo
@echo "Use 'make help' to print a full explanation of supported targets"
@echo "and features."
2008-03-11 05:37:39 +00:00
@echo
@exit 1
2019-06-16 15:53:39 +00:00
e l s e
i f n e q ( $( filter $ ( TARGET ) , linux linux 22 linux 24 linux 24e linux 26 linux 2628) , )
2019-06-14 14:44:49 +00:00
all :
@echo
@echo " Target ' $( TARGET) ' was removed from HAProxy 2.0 due to being irrelevant and "
@echo "often wrong. Please use 'linux-glibc' instead or define your custom target"
@echo "by checking available options using 'make help TARGET=<your-target>'."
@echo
@exit 1
2008-03-11 05:37:39 +00:00
e l s e
2021-04-02 11:59:17 +00:00
all : haproxy dev /flags /flags $( EXTRA )
2022-12-21 14:49:56 +00:00
e n d i f # obsolete targets
e n d i f # TARGET
2005-12-17 11:21:26 +00:00
2020-11-05 15:42:25 +00:00
OBJS =
2012-05-25 21:53:16 +00:00
2019-01-10 09:01:03 +00:00
i f n e q ( $( EXTRA_OBJS ) , )
2022-12-21 14:49:56 +00:00
OBJS += $( EXTRA_OBJS)
2019-01-10 09:01:03 +00:00
e n d i f
MEDIUM: add haproxy-systemd-wrapper
Currently, to reload haproxy configuration, you have to use "-sf".
There is a problem with this way of doing things. First of all, in the systemd world,
reload commands should be "oneshot" ones, which means they should not be the new main
process but rather a tool which makes a call to it and then exits. With the current approach,
the reload command is the new main command and moreover, it makes the previous one exit.
Systemd only tracks the main program, seeing it ending, it assumes it either finished or failed,
and kills everything remaining as a grabage collector. We then end up with no haproxy running
at all.
This patch adds wrapper around haproxy, no changes at all have been made into it,
so it's not intrusive and doesn't change anything for other hosts. What this wrapper does
is basically launching haproxy as a child, listen to the SIGUSR2 (not to conflict with
haproxy itself) signal, and spawing a new haproxy with "-sf" as a child to relay the
first one.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2013-02-12 09:53:53 +00:00
2022-05-30 17:24:27 +00:00
OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \
src/stream.o src/stats.o src/http_ana.o src/server.o \
src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \
src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \
src/cli.o src/connection.o src/proxy.o src/http_htx.o \
src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \
src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \
src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \
src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \
src/h2.o src/filters.o src/server_state.o src/payload.o \
src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o \
src/cfgparse-global.o src/trace.o src/tcp_sample.o \
src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \
src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \
src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \
src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \
2022-11-24 07:57:13 +00:00
src/flt_bwlim.o src/thread.o src/http.o src/lb_chash.o src/applet.o \
2022-05-30 17:24:27 +00:00
src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \
src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \
src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \
src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \
src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \
MINOR: event_hdl: add event handler base api
Adding base code to provide subscribe/publish API for internal
events processing.
event_hdl provides two complementary APIs, both are implemented
in src/event_hdl.c and include/haproxy/event_hdl{-t.h,.h}:
One API targeting developers that want to register event handlers
that will be notified on specific events.
(SUBSCRIBE)
One API targeting developers that want to notify registered handlers
about an event.
(PUBLISH)
This feature is being considered to address the following scenarios:
- mailers code refactoring (getting rid of deprecated
tcp-check ruleset implementation)
- server events from lua code (registering user defined
lua function that is executed with relevant data when a
server is dynamically added/removed or on server state change)
- providing a stable and easy to use API for upcoming
developments that rely on specific events to perform actions.
(e.g: ressource cleanup when a server is deleted from haproxy)
At this time though, we don't have much use cases in mind in addition to
server events handling, but the API is aimed at being multipurpose
so that new event families, with their own particularities, can be
easily implemented afterwards (and hopefully) without requiring breaking
changes to the API.
Moreover, you should know that the API was not designed to cope well
with high rate event publishing.
Mostly because publishing means iterating over unsorted subscriber list.
So it won't scale well as subscriber list increases, but it is intended in
order to keep the code simple and versatile.
Instead, it is assumed that events implemented using this API
should be periodic events, and that events related to critical
io/networking processing should be handled using
dedicated facilities anyway.
(After all, this is meant to be a general purpose event API)
Apart from being easily extensible, one of the main goals of this API is
to make subscriber code as simple and safe as possible.
This is done by offering multiple event handling modes:
- SYNC mode:
publishing code directly
leverages handler code (callback function)
and handler code has a direct access to "live" event data
(pointers mostly, alongside with lock hints/context
so that accessing data pointers can be done properly)
- normal ASYNC mode:
handler is executed in a backward compatible way with sync mode,
so that it is easy to switch from and to SYNC/ASYNC mode.
Only here the handler has access to "offline" event data, and
not "live" data (ptrs) so that data consistency is guaranteed.
By offline, you should understand "snapshot" of relevant data
at the time of the event, so that the handler can consume it
later (even if associated ressource is not valid anymore)
- advanced ASYNC mode
same as normal ASYNC mode, but here handler is not a function
that is executed with event data passed as argument: handler is a
user defined tasklet that is notified when event occurs.
The tasklet may consume pending events and associated data
through its own message queue.
ASYNC mode should be considered first if you don't rely on live event
data and you wan't to make sure that your code has the lowest impact
possible on publisher code. (ie: you don't want to break stuff)
Internal API documentation will follow:
You will find more details about the notions we roughly approached here.
2022-11-16 17:06:28 +00:00
src/fix.o src/ev_select.o src/arg.o src/sock_inet.o src/event_hdl.o \
2022-05-30 17:24:27 +00:00
src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o \
src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \
src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \
src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \
src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \
src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \
src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \
src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \
2022-11-24 07:57:13 +00:00
src/ebtree.o src/hash.o src/dgram.o src/version.o
2020-11-05 15:42:25 +00:00
i f n e q ( $( TRACE ) , )
2022-12-21 14:49:56 +00:00
OBJS += src/calltrace.o
2020-11-05 15:42:25 +00:00
e n d i f
2016-05-30 11:39:32 +00:00
# Used only for forced dependency checking. May be cleared during development.
2020-05-27 09:05:33 +00:00
INCLUDES = $( wildcard include/*/*.h)
2016-05-30 13:16:10 +00:00
DEP = $( INCLUDES) .build_opts
2018-12-13 13:02:25 +00:00
help :
MINOR: build: discard echoing in help target
When V=1 is used in conjuction with help, the output becomes pretty
difficult to read properly.
$ make TARGET=linux-glibc V=1 help
..
DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
echo; \
if [ -n "" ]; then \
if [ -n "" ]; then \
echo "Current TARGET: "; \
else \
echo "Current TARGET: (custom target)"; \
fi; \
else \
echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
echo " custom"; \
fi
TARGET not set, you may pass 'TARGET=xxx' to set one among :
linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,
osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,
custom
echo;echo "Enabled features for TARGET '' (disable with 'USE_xxx=') :"
Enabled features for TARGET '' (disable with 'USE_xxx=') :
set -- POLL ; echo " $*" | (fmt || cat) 2>/dev/null
POLL
echo;echo "Disabled features for TARGET '' (enable with 'USE_xxx=1') :"
Disabled features for TARGET '' (enable with 'USE_xxx=1') :
set -- EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE THREAD PTHREAD_PSHARED BACKTRACE STATIC_PCRE STATIC_PCRE2 TPROXY LINUX_TPROXY LINUX_SPLICE LIBCRYPT CRYPT_H GETADDRINFO OPENSSL LUA FUTEX ACCEPT4 CLOSEFROM ZLIB SLZ CPU_AFFINITY TFO NS DL RT DEVICEATLAS 51DEGREES WURFL SYSTEMD OBSOLETE_LINKER PRCTL THREAD_DUMP EVPORTS OT QUIC; echo " $*" | (fmt || cat) 2>/dev/null
EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE
This commit ensure the help target always discard line echoing
regardless of V variable as done for reg-tests-help target.
2021-01-17 18:47:47 +00:00
@sed -ne " /^[^#]* $$ /q;s/^# \{0,1\}\(.*\)/\1/;p " Makefile
@echo; \
2019-06-14 13:52:01 +00:00
if [ -n " $( TARGET) " ] ; then \
2019-06-16 17:26:18 +00:00
if [ -n " $( set_target_defaults) " ] ; then \
echo " Current TARGET: $( TARGET) " ; \
else \
echo " Current TARGET: $( TARGET) (custom target) " ; \
fi ; \
2019-06-14 13:52:01 +00:00
else \
2019-06-14 13:52:01 +00:00
echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :" ; \
2020-10-08 05:15:06 +00:00
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd," ; \
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic," ; \
echo " custom" ; \
2019-06-14 13:52:01 +00:00
fi
MINOR: build: discard echoing in help target
When V=1 is used in conjuction with help, the output becomes pretty
difficult to read properly.
$ make TARGET=linux-glibc V=1 help
..
DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
echo; \
if [ -n "" ]; then \
if [ -n "" ]; then \
echo "Current TARGET: "; \
else \
echo "Current TARGET: (custom target)"; \
fi; \
else \
echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
echo " custom"; \
fi
TARGET not set, you may pass 'TARGET=xxx' to set one among :
linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,
osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,
custom
echo;echo "Enabled features for TARGET '' (disable with 'USE_xxx=') :"
Enabled features for TARGET '' (disable with 'USE_xxx=') :
set -- POLL ; echo " $*" | (fmt || cat) 2>/dev/null
POLL
echo;echo "Disabled features for TARGET '' (enable with 'USE_xxx=1') :"
Disabled features for TARGET '' (enable with 'USE_xxx=1') :
set -- EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE THREAD PTHREAD_PSHARED BACKTRACE STATIC_PCRE STATIC_PCRE2 TPROXY LINUX_TPROXY LINUX_SPLICE LIBCRYPT CRYPT_H GETADDRINFO OPENSSL LUA FUTEX ACCEPT4 CLOSEFROM ZLIB SLZ CPU_AFFINITY TFO NS DL RT DEVICEATLAS 51DEGREES WURFL SYSTEMD OBSOLETE_LINKER PRCTL THREAD_DUMP EVPORTS OT QUIC; echo " $*" | (fmt || cat) 2>/dev/null
EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE
This commit ensure the help target always discard line echoing
regardless of V variable as done for reg-tests-help target.
2021-01-17 18:47:47 +00:00
@echo; echo " Enabled features for TARGET ' $( TARGET) ' (disable with 'USE_xxx=') : "
2022-12-22 18:32:24 +00:00
@set -- $( enabled_opts) ; echo " $$ * " | ( fmt || cat) 2>/dev/null
MINOR: build: discard echoing in help target
When V=1 is used in conjuction with help, the output becomes pretty
difficult to read properly.
$ make TARGET=linux-glibc V=1 help
..
DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
echo; \
if [ -n "" ]; then \
if [ -n "" ]; then \
echo "Current TARGET: "; \
else \
echo "Current TARGET: (custom target)"; \
fi; \
else \
echo "TARGET not set, you may pass 'TARGET=xxx' to set one among :";\
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
echo " custom"; \
fi
TARGET not set, you may pass 'TARGET=xxx' to set one among :
linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,
osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,
custom
echo;echo "Enabled features for TARGET '' (disable with 'USE_xxx=') :"
Enabled features for TARGET '' (disable with 'USE_xxx=') :
set -- POLL ; echo " $*" | (fmt || cat) 2>/dev/null
POLL
echo;echo "Disabled features for TARGET '' (enable with 'USE_xxx=1') :"
Disabled features for TARGET '' (enable with 'USE_xxx=1') :
set -- EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE THREAD PTHREAD_PSHARED BACKTRACE STATIC_PCRE STATIC_PCRE2 TPROXY LINUX_TPROXY LINUX_SPLICE LIBCRYPT CRYPT_H GETADDRINFO OPENSSL LUA FUTEX ACCEPT4 CLOSEFROM ZLIB SLZ CPU_AFFINITY TFO NS DL RT DEVICEATLAS 51DEGREES WURFL SYSTEMD OBSOLETE_LINKER PRCTL THREAD_DUMP EVPORTS OT QUIC; echo " $*" | (fmt || cat) 2>/dev/null
EPOLL KQUEUE NETFILTER PCRE PCRE_JIT PCRE2 PCRE2_JIT PRIVATE_CACHE
This commit ensure the help target always discard line echoing
regardless of V variable as done for reg-tests-help target.
2021-01-17 18:47:47 +00:00
@echo; echo " Disabled features for TARGET ' $( TARGET) ' (enable with 'USE_xxx=1') : "
2022-12-22 18:32:24 +00:00
@set -- $( disabled_opts) ; echo " $$ * " | ( fmt || cat) 2>/dev/null
2018-12-13 13:02:25 +00:00
2020-03-04 15:21:06 +00:00
# Used only to force a rebuild if some build options change, but we don't do
# it for certain targets which take no build options
i f n e q ( r e g - t e s t s , $( firstword $ ( MAKECMDGOALS ) ) )
2020-11-21 17:07:58 +00:00
build_opts = $( shell rm -f .build_opts.new; echo \' $( TARGET) $( BUILD_OPTIONS) $( VERBOSE_CFLAGS) $( DEBUG) \' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi )
2019-03-29 16:17:52 +00:00
.build_opts : $( build_opts )
2020-03-04 15:21:06 +00:00
e l s e
.build_opts :
2022-12-21 14:49:56 +00:00
e n d i f # reg-tests
2016-05-30 11:39:32 +00:00
2020-05-27 08:43:24 +00:00
haproxy : $( OPTIONS_OBJS ) $( OBJS )
2018-11-19 07:15:54 +00:00
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2005-12-17 11:21:26 +00:00
2006-06-26 00:48:02 +00:00
objsize : haproxy
2018-11-19 06:44:42 +00:00
$( Q) objdump -t $^| grep ' g ' | grep -F '.text' | awk '{print $$5 FS $$6}' | sort
2006-06-26 00:48:02 +00:00
2016-05-30 11:39:32 +00:00
%.o : %.c $( DEP )
2018-11-19 07:15:54 +00:00
$( cmd_CC) $( COPTS) -c -o $@ $<
2005-12-17 11:21:26 +00:00
2021-04-02 12:46:21 +00:00
admin/halog/halog : admin /halog /halog .o admin /halog /fgets 2.o src /ebtree .o src /eb 32tree .o src /eb 64tree .o src /ebmbtree .o src /ebsttree .o src /ebistree .o src /ebimtree .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2020-10-22 03:12:57 +00:00
2021-08-11 11:54:52 +00:00
admin/dyncookie/dyncookie : admin /dyncookie /dyncookie .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2021-04-02 11:31:46 +00:00
dev/flags/flags : dev /flags /flags .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2020-10-22 03:12:57 +00:00
2022-08-12 09:23:59 +00:00
dev/haring/haring : dev /haring /haring .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2021-04-02 12:27:26 +00:00
dev/hpack/% : dev /hpack /%.o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2021-04-02 11:31:46 +00:00
dev/poll/poll :
2022-11-17 07:34:37 +00:00
$( cmd_MAKE) -C dev/poll poll CC = '$(CC)' OPTIMIZE = '$(COPTS)' V = '$(V)'
2020-10-22 03:12:57 +00:00
2022-06-14 14:35:41 +00:00
dev/qpack/decode : dev /qpack /decode .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2021-04-02 11:31:46 +00:00
dev/tcploop/tcploop :
2022-11-17 07:34:37 +00:00
$( cmd_MAKE) -C dev/tcploop tcploop CC = '$(CC)' OPTIMIZE = '$(COPTS)' V = '$(V)'
2020-10-22 03:12:57 +00:00
2022-09-08 18:47:28 +00:00
dev/udp/udp-perturb : dev /udp /udp -perturb .o
$( cmd_LD) $( LDFLAGS) -o $@ $^ $( LDOPTS)
2019-01-04 17:20:32 +00:00
# rebuild it every time
2022-11-17 07:06:16 +00:00
.PHONY : src /version .c dev /poll /poll dev /tcploop /tcploop
2019-01-04 17:20:32 +00:00
2019-08-08 14:53:40 +00:00
src/calltrace.o : src /calltrace .c $( DEP )
2018-11-19 07:15:54 +00:00
$( cmd_CC) $( TRACE_COPTS) -c -o $@ $<
2012-05-25 21:53:16 +00:00
2016-05-30 11:39:32 +00:00
src/haproxy.o : src /haproxy .c $( DEP )
2018-11-19 07:15:54 +00:00
$( cmd_CC) $( COPTS) \
2008-01-02 19:48:34 +00:00
-DBUILD_TARGET= '"$(strip $(TARGET))"' \
2009-04-11 17:45:50 +00:00
-DBUILD_ARCH= '"$(strip $(ARCH))"' \
2008-01-02 19:48:34 +00:00
-DBUILD_CPU= '"$(strip $(CPU))"' \
-DBUILD_CC= '"$(strip $(CC))"' \
-DBUILD_CFLAGS= '"$(strip $(VERBOSE_CFLAGS))"' \
-DBUILD_OPTIONS= '"$(strip $(BUILD_OPTIONS))"' \
2020-11-21 17:07:59 +00:00
-DBUILD_DEBUG= '"$(strip $(DEBUG))"' \
2022-12-22 18:32:24 +00:00
-DBUILD_FEATURES= '"$(strip $(build_features))"' \
2008-01-02 19:48:34 +00:00
-c -o $@ $<
2007-12-02 10:28:59 +00:00
2008-03-12 13:57:54 +00:00
install-man :
2022-07-16 09:18:50 +00:00
$( Q) $( INSTALL) -d " $( DESTDIR) $( MANDIR) " /man1
$( Q) $( INSTALL) -m 644 doc/haproxy.1 " $( DESTDIR) $( MANDIR) " /man1
2008-03-12 13:57:54 +00:00
2015-10-13 20:20:55 +00:00
EXCLUDE_DOCUMENTATION = lgpl gpl coding-style
DOCUMENTATION = $( filter-out $( EXCLUDE_DOCUMENTATION) ,$( patsubst doc/%.txt,%,$( wildcard doc/*.txt) ) )
2008-03-12 15:24:49 +00:00
install-doc :
2022-07-16 09:18:50 +00:00
$( Q) $( INSTALL) -d " $( DESTDIR) $( DOCDIR) "
2018-11-19 06:51:04 +00:00
$( Q) for x in $( DOCUMENTATION) ; do \
2022-07-16 09:18:50 +00:00
$( INSTALL) -m 644 doc/$$ x.txt " $( DESTDIR) $( DOCDIR) " ; \
2008-03-12 15:24:49 +00:00
done
2016-06-24 16:30:22 +00:00
install-bin :
2018-11-19 06:44:42 +00:00
$( Q) for i in haproxy $( EXTRA) ; do \
2016-06-24 16:30:22 +00:00
if ! [ -e " $$ i " ] ; then \
echo "Please run 'make' before 'make install'." ; \
exit 1; \
fi ; \
done
2022-07-16 09:18:50 +00:00
$( Q) $( INSTALL) -d " $( DESTDIR) $( SBINDIR) "
$( Q) $( INSTALL) haproxy $( EXTRA) " $( DESTDIR) $( SBINDIR) "
2008-03-12 13:25:35 +00:00
2008-03-12 16:28:13 +00:00
install : install -bin install -man install -doc
2008-03-12 14:21:05 +00:00
2015-02-04 11:14:26 +00:00
uninstall :
2018-11-19 06:51:04 +00:00
$( Q) rm -f " $( DESTDIR) $( MANDIR) " /man1/haproxy.1
$( Q) for x in $( DOCUMENTATION) ; do \
2015-02-04 11:14:26 +00:00
rm -f " $( DESTDIR) $( DOCDIR) " /$$ x.txt ; \
done
2018-11-19 06:51:04 +00:00
$( Q) -rmdir " $( DESTDIR) $( DOCDIR) "
$( Q) rm -f " $( DESTDIR) $( SBINDIR) " /haproxy
2015-02-04 11:14:26 +00:00
2005-12-17 11:21:26 +00:00
clean :
2020-05-27 08:43:24 +00:00
$( Q) rm -f *.[ oas] src/*.[ oas] haproxy test .build_opts .build_opts.new
2021-04-02 13:35:19 +00:00
$( Q) for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$ dir/*~ $$ dir/*.rej $$ dir/core; done
2020-10-01 02:05:39 +00:00
$( Q) rm -f haproxy-$( VERSION) .tar.gz haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz
$( Q) rm -f haproxy-$( VERSION) haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) nohup.out gmon.out
2021-04-02 13:35:19 +00:00
$( Q) rm -f addons/promex/*.[ oas]
2021-04-02 14:12:32 +00:00
$( Q) rm -f addons/51degrees/*.[ oas] addons/51degrees/dummy/*.[ oas] addons/51degrees/dummy/*/*.[ oas]
2022-01-27 18:13:54 +00:00
$( Q) rm -f addons/deviceatlas/*.[ oas] addons/deviceatlas/dummy/*.[ oas] addons/deviceatlas/dummy/*.o
2022-12-08 08:27:36 +00:00
$( Q) rm -f addons/deviceatlas/dummy/Os/*.o
2021-04-02 15:16:46 +00:00
$( Q) rm -f addons/ot/src/*.[ oas]
2021-04-02 14:39:44 +00:00
$( Q) rm -f addons/wurfl/*.[ oas] addons/wurfl/dummy/*.[ oas]
2021-04-21 15:17:16 +00:00
$( Q) rm -f admin/*/*.[ oas] admin/*/*/*.[ oas]
2021-04-02 12:45:06 +00:00
$( Q) rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog
2021-08-11 11:54:52 +00:00
$( Q) rm -f admin/dyncookie/dyncookie
2021-04-21 15:17:16 +00:00
$( Q) rm -f dev/*/*.[ oas]
2022-08-12 09:23:59 +00:00
$( Q) rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop
2021-04-02 12:27:26 +00:00
$( Q) rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht
2022-06-14 14:35:41 +00:00
$( Q) rm -f dev/qpack/decode
2005-12-17 11:51:03 +00:00
2009-10-10 20:20:44 +00:00
tags :
2018-11-19 07:14:40 +00:00
$( Q) find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
2009-10-10 20:20:44 +00:00
xargs -0 etags --declarations --members
2013-10-18 14:26:39 +00:00
cscope :
2018-11-19 07:14:40 +00:00
$( Q) find src include -name "*.[ch]" -print | cscope -q -b -i -
2013-10-18 14:26:39 +00:00
2006-03-19 20:30:14 +00:00
tar : clean
2020-10-01 02:05:39 +00:00
$( Q) ln -s . haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION)
$( Q) tar --exclude= haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) /.git \
--exclude= haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) /haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) \
--exclude= haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) /haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz \
-cf - haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) /* | gzip -c9 >haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz
$( Q) echo haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz
$( Q) rm -f haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION)
2006-03-19 20:16:26 +00:00
2012-12-20 14:00:44 +00:00
git-tar :
2020-10-01 02:05:39 +00:00
$( Q) git archive --format= tar --prefix= " haproxy- $( VERSION) $( SUBVERS) $( EXTRAVERSION) / " HEAD | gzip -9 > haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz
$( Q) echo haproxy-$( VERSION) $( SUBVERS) $( EXTRAVERSION) .tar.gz
2007-09-09 21:31:11 +00:00
version :
@echo " VERSION: $( VERSION) "
@echo " SUBVERS: $( SUBVERS) "
@echo " VERDATE: $( VERDATE) "
# never use this one if you don't know what it is used for.
update-version :
@echo "Ready to update the following versions :"
@echo " VERSION: $( VERSION) "
@echo " SUBVERS: $( SUBVERS) "
@echo " VERDATE: $( VERDATE) "
@echo "Press [ENTER] to continue or Ctrl-C to abort now." ; read
echo " $( VERSION) " > VERSION
echo " $( SUBVERS) " > SUBVERS
echo " $( VERDATE) " > VERDATE
2018-06-18 17:32:10 +00:00
2018-10-03 07:40:22 +00:00
# just display the build options
opts :
@echo -n 'Using: '
@echo -n 'TARGET="$(strip $(TARGET))" '
@echo -n 'ARCH="$(strip $(ARCH))" '
@echo -n 'CPU="$(strip $(CPU))" '
@echo -n 'CC="$(strip $(CC))" '
@echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" '
@echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" '
@echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" '
@echo " $( strip $( BUILD_OPTIONS) ) "
@echo 'COPTS="$(strip $(COPTS))"'
@echo 'LDFLAGS="$(strip $(LDFLAGS))"'
@echo 'LDOPTS="$(strip $(LDOPTS))"'
@echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"'
@echo 'OBJS="$(strip $(OBJS))"'
2018-12-19 15:27:47 +00:00
i f e q ( r e g - t e s t s , $( firstword $ ( MAKECMDGOALS ) ) )
REGTEST_ARGS := $( wordlist 2, $( words $( MAKECMDGOALS) ) , $( MAKECMDGOALS) )
$( eval $( REGTEST_ARGS) :; @true)
e n d i f
2018-08-22 08:41:33 +00:00
# Target to run the regression testing script files.
2018-06-18 17:32:10 +00:00
reg-tests :
2019-03-29 14:07:24 +00:00
$( Q) $( REG_TEST_SCRIPT) --type " $( REGTESTS_TYPES) " $( REGTEST_ARGS) $( REG_TEST_FILES)
2018-12-19 15:27:47 +00:00
.PHONY : $( REGTEST_ARGS )
2018-12-13 21:15:05 +00:00
reg-tests-help :
@echo
2019-03-29 14:07:24 +00:00
@echo "To launch the reg tests for haproxy, first export to your environment "
@echo "VTEST_PROGRAM variable to point to your vtest program:"
2019-01-11 09:10:21 +00:00
@echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest "
2018-12-13 21:15:05 +00:00
@echo "or"
2019-01-11 09:10:21 +00:00
@echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest "
2018-12-13 21:15:05 +00:00
@echo
2019-03-29 14:07:24 +00:00
@echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM "
@echo "but with ./haproxy as default value."
2018-12-13 21:15:05 +00:00
@echo
@echo "To run all the tests:"
@echo " $$ make reg-tests "
@echo
@echo "You can also set the programs to be used on the command line:"
2019-01-11 09:10:21 +00:00
@echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests "
2018-12-13 21:15:05 +00:00
@echo
2019-03-29 14:07:24 +00:00
@echo "To run tests with specific types:"
@echo " $$ REGTESTS_TYPES=slow,default make reg-tests "
2018-12-13 21:15:05 +00:00
@echo
2021-02-05 10:27:54 +00:00
@echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable."
2019-03-29 14:07:24 +00:00
@echo
@echo "About the reg test types:"
@echo " any : all the tests without distinction (this is the default"
@echo " value of REGTESTS_TYPES."
@echo " default : dedicated to pure haproxy compliance tests."
@echo " slow : scripts which take non negligible time to run."
@echo " bug : scripts in relation with bugs they help to reproduce."
@echo " broken : scripts triggering known broken behaviors for which"
@echo " there is still no fix."
@echo " experimental: for scripts which are experimental, typically used to"
@echo " develop new scripts."
@echo
@echo "Note that 'reg-tests' target run '" $( REG_TEST_SCRIPT) "' script"
@echo "(see --help option of this script for more information)."
2018-12-13 21:15:05 +00:00
.PHONY : reg -tests reg -tests -help