haproxy/include/proto/stream_interface.h

106 lines
3.0 KiB
C
Raw Normal View History

[MAJOR] add a connection error state to the stream_interface Tracking connection status changes was hard, and some code was redundant. A new SI_ST_CER state was added to the stream interface to indicate a past connection error, and an SI_FL_ERR flag was added to report past I/O error. The stream_sock code does not set the connection to SI_ST_CLO anymore in case of I/O error, it's the upper layer which does it. This makes it possible to know exactly when the file descriptors are allocated. The new SI_ST_CER state permitted to split tcp_connection_status() in two parts, one processing SI_ST_CON and the other one SI_ST_CER. Synchronous connection errors now make use of this last state, hence eliminating duplicate code. Some ib<->ob copy paste errors were found and fixed, and all entities setting SI_ST_CLO also shut the buffers down. Some of these stream_interface specific functions and structures have migrated to a new stream_interface.c file. Some types of errors are still not detected by the buffers. For instance, let's assume the following scenario in one single pass of process_session: a connection sits in SI_ST_TAR state during a retry. At TAR expiration, a new connection attempt is made, the connection is obtained and srv->cur_sess is increased. Then the buffer timeout is fires and everything is cleared, the new state becomes SI_ST_CLO. The cleaning code checks that previous state was either SI_ST_CON or SI_ST_EST to release the connection. But that's wrong because last state is still SI_ST_TAR. So the server's connection count does not get decreased. This means that prev_state must not be used, and must be replaced by some transition detection instead of level detection. The following debugging line was useful to track state changes : fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__, s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
2008-11-03 05:26:53 +00:00
/*
* include/proto/stream_interface.h
* This file contains stream_interface function prototypes
*
* Copyright (C) 2000-2011 Willy Tarreau - w@1wt.eu
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation, version 2.1
* exclusively.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
[MAJOR] add a connection error state to the stream_interface Tracking connection status changes was hard, and some code was redundant. A new SI_ST_CER state was added to the stream interface to indicate a past connection error, and an SI_FL_ERR flag was added to report past I/O error. The stream_sock code does not set the connection to SI_ST_CLO anymore in case of I/O error, it's the upper layer which does it. This makes it possible to know exactly when the file descriptors are allocated. The new SI_ST_CER state permitted to split tcp_connection_status() in two parts, one processing SI_ST_CON and the other one SI_ST_CER. Synchronous connection errors now make use of this last state, hence eliminating duplicate code. Some ib<->ob copy paste errors were found and fixed, and all entities setting SI_ST_CLO also shut the buffers down. Some of these stream_interface specific functions and structures have migrated to a new stream_interface.c file. Some types of errors are still not detected by the buffers. For instance, let's assume the following scenario in one single pass of process_session: a connection sits in SI_ST_TAR state during a retry. At TAR expiration, a new connection attempt is made, the connection is obtained and srv->cur_sess is increased. Then the buffer timeout is fires and everything is cleared, the new state becomes SI_ST_CLO. The cleaning code checks that previous state was either SI_ST_CON or SI_ST_EST to release the connection. But that's wrong because last state is still SI_ST_TAR. So the server's connection count does not get decreased. This means that prev_state must not be used, and must be replaced by some transition detection instead of level detection. The following debugging line was useful to track state changes : fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__, s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
2008-11-03 05:26:53 +00:00
#ifndef _PROTO_STREAM_INTERFACE_H
#define _PROTO_STREAM_INTERFACE_H
#include <stdlib.h>
#include <common/config.h>
#include <types/stream_interface.h>
/* main event functions used to move data between sockets and buffers */
int stream_int_check_timeouts(struct stream_interface *si);
[MAJOR] add a connection error state to the stream_interface Tracking connection status changes was hard, and some code was redundant. A new SI_ST_CER state was added to the stream interface to indicate a past connection error, and an SI_FL_ERR flag was added to report past I/O error. The stream_sock code does not set the connection to SI_ST_CLO anymore in case of I/O error, it's the upper layer which does it. This makes it possible to know exactly when the file descriptors are allocated. The new SI_ST_CER state permitted to split tcp_connection_status() in two parts, one processing SI_ST_CON and the other one SI_ST_CER. Synchronous connection errors now make use of this last state, hence eliminating duplicate code. Some ib<->ob copy paste errors were found and fixed, and all entities setting SI_ST_CLO also shut the buffers down. Some of these stream_interface specific functions and structures have migrated to a new stream_interface.c file. Some types of errors are still not detected by the buffers. For instance, let's assume the following scenario in one single pass of process_session: a connection sits in SI_ST_TAR state during a retry. At TAR expiration, a new connection attempt is made, the connection is obtained and srv->cur_sess is increased. Then the buffer timeout is fires and everything is cleared, the new state becomes SI_ST_CLO. The cleaning code checks that previous state was either SI_ST_CON or SI_ST_EST to release the connection. But that's wrong because last state is still SI_ST_TAR. So the server's connection count does not get decreased. This means that prev_state must not be used, and must be replaced by some transition detection instead of level detection. The following debugging line was useful to track state changes : fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__, s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
2008-11-03 05:26:53 +00:00
void stream_int_report_error(struct stream_interface *si);
void stream_int_retnclose(struct stream_interface *si, const struct chunk *msg);
[MAJOR] add a connection error state to the stream_interface Tracking connection status changes was hard, and some code was redundant. A new SI_ST_CER state was added to the stream interface to indicate a past connection error, and an SI_FL_ERR flag was added to report past I/O error. The stream_sock code does not set the connection to SI_ST_CLO anymore in case of I/O error, it's the upper layer which does it. This makes it possible to know exactly when the file descriptors are allocated. The new SI_ST_CER state permitted to split tcp_connection_status() in two parts, one processing SI_ST_CON and the other one SI_ST_CER. Synchronous connection errors now make use of this last state, hence eliminating duplicate code. Some ib<->ob copy paste errors were found and fixed, and all entities setting SI_ST_CLO also shut the buffers down. Some of these stream_interface specific functions and structures have migrated to a new stream_interface.c file. Some types of errors are still not detected by the buffers. For instance, let's assume the following scenario in one single pass of process_session: a connection sits in SI_ST_TAR state during a retry. At TAR expiration, a new connection attempt is made, the connection is obtained and srv->cur_sess is increased. Then the buffer timeout is fires and everything is cleared, the new state becomes SI_ST_CLO. The cleaning code checks that previous state was either SI_ST_CON or SI_ST_EST to release the connection. But that's wrong because last state is still SI_ST_TAR. So the server's connection count does not get decreased. This means that prev_state must not be used, and must be replaced by some transition detection instead of level detection. The following debugging line was useful to track state changes : fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__, s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
2008-11-03 05:26:53 +00:00
/* functions used when running a stream interface as a task */
void stream_int_update(struct stream_interface *si);
void stream_int_update_embedded(struct stream_interface *si);
void stream_int_shutr(struct stream_interface *si);
void stream_int_shutw(struct stream_interface *si);
void stream_int_chk_rcv(struct stream_interface *si);
void stream_int_chk_snd(struct stream_interface *si);
struct task *stream_int_register_handler(struct stream_interface *si,
struct si_applet *app);
struct task *stream_int_register_handler_task(struct stream_interface *si,
struct task *(*fct)(struct task *));
void stream_int_unregister_handler(struct stream_interface *si);
static inline void clear_target(struct target *dest)
{
dest->type = TARG_TYPE_NONE;
dest->ptr.v = NULL;
}
static inline void set_target_server(struct target *dest, struct server *s)
{
dest->type = TARG_TYPE_SERVER;
dest->ptr.s = s;
}
static inline void set_target_proxy(struct target *dest, struct proxy *p)
{
dest->type = TARG_TYPE_PROXY;
dest->ptr.p = p;
}
static inline void set_target_applet(struct target *dest, struct si_applet *a)
{
dest->type = TARG_TYPE_APPLET;
dest->ptr.a = a;
}
static inline void set_target_task(struct target *dest, struct task *t)
{
dest->type = TARG_TYPE_TASK;
dest->ptr.t = t;
}
static inline struct target *copy_target(struct target *dest, struct target *src)
{
*dest = *src;
return dest;
}
static inline int target_match(struct target *a, struct target *b)
{
return a->type == b->type && a->ptr.v == b->ptr.v;
}
static inline struct server *target_srv(struct target *t)
{
if (!t || t->type != TARG_TYPE_SERVER)
return NULL;
return t->ptr.s;
}
[MAJOR] add a connection error state to the stream_interface Tracking connection status changes was hard, and some code was redundant. A new SI_ST_CER state was added to the stream interface to indicate a past connection error, and an SI_FL_ERR flag was added to report past I/O error. The stream_sock code does not set the connection to SI_ST_CLO anymore in case of I/O error, it's the upper layer which does it. This makes it possible to know exactly when the file descriptors are allocated. The new SI_ST_CER state permitted to split tcp_connection_status() in two parts, one processing SI_ST_CON and the other one SI_ST_CER. Synchronous connection errors now make use of this last state, hence eliminating duplicate code. Some ib<->ob copy paste errors were found and fixed, and all entities setting SI_ST_CLO also shut the buffers down. Some of these stream_interface specific functions and structures have migrated to a new stream_interface.c file. Some types of errors are still not detected by the buffers. For instance, let's assume the following scenario in one single pass of process_session: a connection sits in SI_ST_TAR state during a retry. At TAR expiration, a new connection attempt is made, the connection is obtained and srv->cur_sess is increased. Then the buffer timeout is fires and everything is cleared, the new state becomes SI_ST_CLO. The cleaning code checks that previous state was either SI_ST_CON or SI_ST_EST to release the connection. But that's wrong because last state is still SI_ST_TAR. So the server's connection count does not get decreased. This means that prev_state must not be used, and must be replaced by some transition detection instead of level detection. The following debugging line was useful to track state changes : fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__, s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
2008-11-03 05:26:53 +00:00
#endif /* _PROTO_STREAM_INTERFACE_H */
/*
* Local variables:
* c-indent-level: 8
* c-basic-offset: 8
* End:
*/