If a developer using FFmpeg libraries seeks into an earlier position and calls
avcodec_flush_buffers() afterwards as recommended, the Vorbis decoder will drop
the next frame, since buffer flushing clears the first_frame flag. As a result,
the audio samples the calling code receives may be ahead of the requested seek
position, which is unacceptable in some use cases such as playing a looping
sound effect.
This commit records the presentation timestamp of the first frame and
determines after that if the new frame is the first frame (possible after
seeking to the start) by comparing its pts to the stored pts.
When appending two values (due to AV_DICT_APPEND), the earlier code
would first zero-allocate a buffer of the required size and then
copy both parts into it via av_strlcat(). This is problematic,
as it leads to quadratic performance in case of frequent enlargements.
Fix this by using av_realloc() (which is hopefully designed to handle
such cases in a better way than simply throwing the buffer we already
have away) and by copying the string via memcpy() (after all, we already
calculated the strlen of both strings).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If a key already exists in an AVDictionary and the AV_DICT_APPEND flag
is set, the old entry is at first discarded from the dictionary, but
a pointer to the value is kept. Lateron enough memory to store the
appended string is allocated; should this allocation fail, the old string
is not freed and hence leaks. This commit changes this by moving
creating the combined value to an earlier point in the function,
which also ensures that the AVDictionary is unchanged in case of errors.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We know that an AVDictionary is not empty if we have just added
an entry to it, so only check for it being empty on the branch
that does not do so.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_strlcpy() returns the length of the src string to enable
the caller to check for truncation. It is currently used in
the following way in dump_metadata(): Every metadata value
is searched for \b, \n, \v, \f, \r and then the data up to
the first of these characters found is copied to a small
temporary buffer via av_strlcpy() (but of course not more
than fits into said buffer) and then printed; all characters up
to the character found earlier are then treated as consumed.
But this is bad performance-wise if the while string is big
and contains many of these characters, because av_strlcpy()
will unnecessarily calculate the length of the whole remaining string.
(dump_metadata() actually ignored the return value of av_strlcpy().)
Fix this by not copying the data to a temporary buffer at all.
Instead just use %.*s to bound the number of characters output.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It may be NULL, as is the case for D3D11VA_VLD.
Running "ffmpeg -h decoder=h264" on a Windows build
Before:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 (null) d3d11va cuda
After:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 d3d11va cuda
Signed-off-by: James Almer <jamrial@gmail.com>
If it's unsupported or invalid, then there's no point trying to rebuild it
using a value that may have been derived from the same layout to begin with.
Move the checks before the attempts at copying the layout while at it.
Fixes ticket #9908.
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit 2c8dc7e953.
The loongarch headers have been fixed, so that this wrapper
is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit 6c9a60ada4.
The loongarch headers have been fixed, so that this workaround
is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If the target supports the Basic bit-manipulation (Zbb) extension, then
the REV8 instruction is available to reverse byte order.
Note that this instruction only exists at the "XLEN" register size,
so we need to right shift the result down to the data width.
If Zbb is not supported, then this patchset does nothing. Support for
run-time detection is left for the future. Currently, there are no
bits in auxv/ELF HWCAP for Z-extensions, so there are no clean ways to
do this.
RISC-V defines the CLZ instruction as part of the ratified Zbb subset
of the (not yet ratified) bit mapulation extension (B). We can detect
it from the __riscv_zbb predefined constant. At least GCC 12 already
supports this correctly.
Note that the macro will be non-zero if supported, zero if enabled
in the compiler flags (e.g. -march=rv64gzbb) but not known to the
compiler, and undefined otherwise.
This uses the architected RISC-V 64-bit cycle counter from the
RISC-V unprivileged instruction set.
In 64-bit and 128-bit, this is a straightforward CSR read.
In 32-bit mode, the 64-bit value is exposed as two CSRs, which
cannot be read atomically, so a loop is necessary to detect and fix up
the race condition where the bottom half wraps exactly between the two
reads.
These tests test both the demuxer as well as the muxer
wherever possible. It is not always possible due to the fact
that the muxer supports more codecs than the demuxer.
The spdif demuxer does currently not set the need_parsing flag.
If one were to set this to AVSTREAM_PARSE_FULL, the test results
would change as follows:
- For spdif-aac-remux, the packets are currently padded to 16bits,
i.e. if the actual packet size is odd, there is a padding byte.
The parser splits this byte away into a one byte packet of its own.
Insanely, these one byte packets get the same duration as normal
packets, i.e. timing is ruined.
- The DCA-remux tests get proper duration/timestamps.
- In the spdif-mp2-remux test the demuxer marks the stream as
being MP2; the parser sets it to MP3 and this triggers
the "Codec change in IEC 61937" codepath; this test therefore
returns only two packets with the parser.
- For spdif-mp3-remux some bytes end up in different packets:
Some input packets of this file have an odd length (417B instead
of 418B like all the other packets) and are padded to 418B.
Without a parser, all returned packets from the spdif-demuxer
are 418B. With a parser, the packets that were originally 417B
are 417B again, but the padding byte has not been discarded,
but added to the next packet which is now 419B.
This fixes "Multiple frames in a packet" warning and avoids
an "Invalid data found when processing input" error when decoding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When compiling FFmpeg with GCC-9, some very random segfaults were
observed in code which had previously called down into the SBC encoder
NEON assembly routines. This was caused by these functions clobbering
some of the vfp callee saved registers (d8 - d15 aka q4 - q7). GCC was
using these registers to save local variables, but after these
functions returned, they would contain garbage.
Fix by reallocating the registers in the two affected functions in
the following way:
ff_sbc_analyze_4_neon: q2-q5 => q8-q11, then q1-q4 => q8-q11
ff_sbc_analyze_8_neon: q2-q9 => q8-q15
The reason for using these replacements is to keep closely related
sets of registers consecutively numbered which hopefully makes the
code more easy to follow. Since this commit only reallocates
registers, it should have no performance impact.
Signed-off-by: James Cowgill <jcowgill@debian.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Also fixes a "statement with no effect [-Wunused-value]"
warning from GCC.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is not needed on x64, because the AV_COPY* and AV_ZERO*
macros never use MMX on x64.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only an auxiliary value used for parsing the VP7 frame header.
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Forgotten in d6f8476be4.
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: memleak
Fixes: 50703/clusterfuzz-testcase-minimized-ffmpeg_dem_HLS_fuzzer-6399058578636800
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Jyrki Vesterinen
Rémi Denis-Courmont
Andreas Rheinhardt
James Almer
Roman Arzumanyan
Paul B Mahol
James Cowgill
Lynne
Hao Chen
Philip Langdale
Michael Niedermayer