35846d93e0
avconv: use new encode API
...
The flushing case is a bit strange; not simplifying it so the change is
less noisy.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2016-03-23 19:31:35 +01:00
84aea95e31
avconv: use new decode API
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2016-03-23 19:31:35 +01:00
4426540f0c
avconv: switch to the new BSF API
2016-03-20 08:15:01 +01:00
0b6e5d6b32
avconv: remove sub-frame warning
...
It's not practical to keep this with the new decode API.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2016-03-05 09:10:10 +01:00
15e84ed3f1
avconv: convert to codecpar
...
The switch is not yet complete because the parsers and the bistream
filters do not have a new AVCodecParam-based API yet.
2016-02-23 17:01:58 +01:00
5b9cdf8cba
avconv: switch opening decoders and encoders
...
Open decoders first, next encoders. This makes sure that that
subtitle_header is always set properly, without relying on
avformat_find_stream_info() setting it.
2016-02-23 17:01:58 +01:00
c15f6098b1
avconv: pass the hw context from filters to the encoder
2016-02-14 22:33:26 +01:00
63f7f8d1db
avconv: Drop an impossible check
...
EAGAIN is already managed in poll_filters().
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2016-01-04 16:58:32 +01:00
7ebf1b4ada
avconv: Simplify poll_filters() return value check
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2016-01-04 16:58:32 +01:00
e63e3797a1
avconv: pass the global codec side data to the muxer
2015-12-06 10:23:21 +01:00
3efd71b4d0
avconv: set packet duration for CFR video streams
2015-11-08 11:49:05 +01:00
cd0e08813a
avconv: support infinite loop for the loop option
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-10-26 19:28:24 +01:00
ce70f28a17
avpacket: Replace av_free_packet with av_packet_unref
...
`av_packet_unref` matches the AVFrame ref-counted API and can be used as
a drop in replacement.
Deprecate `av_free_packet`.
2015-10-26 18:00:55 +01:00
a5d4204309
avformat: Always return ref-counted AVPacket
...
And drop the av_dup_packet from the input_thread.
2015-10-26 18:00:55 +01:00
fb472e1a11
avconv: add support for Intel QSV-accelerated transcoding
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-10-16 20:01:37 +02:00
34ed5c2e4d
avformat: Do not use AVFMT_RAWPICTURE
...
There are no formats supporting it anymore and it is deprecated.
Update the documentation accordingly.
2015-10-13 13:43:29 +02:00
16b0c92962
avconv: Add loop option.
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-10-13 09:41:02 +02:00
6064f697a3
lavc: Enable side data only packets by default
...
Deprecate the now unused option, but temporarily retain the capability
to disable the now default behaviour.
Mention this change in the AVPacket documentation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-09-12 13:38:31 +02:00
059a934806
lavc: Consistently prefix input buffer defines
...
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-27 15:24:59 +01:00
def97856de
lavc: AV-prefix all codec capabilities
...
Express bitfields more simply.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-27 15:24:58 +01:00
7c6eb0a1b7
lavc: AV-prefix all codec flags
...
Convert doxygen to multiline and express bitfields more simply.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-27 15:24:58 +01:00
40cf1bbacc
Deprecate avctx.coded_frame
...
The rationale is that coded_frame was only used to communicate key_frame,
pict_type and quality to the caller, as well as a few other random fields,
in a non predictable, let alone consistent way.
There was agreement that there was no use case for coded_frame, as it is
a full-sized AVFrame container used for just 2-3 int-sized properties,
which shouldn't even belong into the AVCodecContext in the first place.
The appropriate AVPacket flag can be used instead of key_frame, while
quality is exported with the new AVPacketSideData quality factor.
There is no replacement for the other fields as they were unreliable,
mishandled or just not used at all.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-20 15:06:50 +01:00
5d3addb937
Add a quality factor packet side data
...
This is necessary to preserve the quality information currently exported
with coded_frame. Add the new side data to every encoder that needs it,
and use it in avconv.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-20 15:06:47 +01:00
6d592fbd0d
avconv: split creating and (re-)configuring complex filtergraphs
...
The current code is less than straightforward due to the fact that
output streams can be created based on filtergraph definitions. This
change should make the code simpler and more readable. It will also be
useful in the future commits.
2015-07-19 09:38:53 +02:00
1959351aec
avconv: move the no streams failure to open_output_file()
...
It is a better place for it, there is no reason to wait until
transcode_init().
2015-07-19 09:38:28 +02:00
ab7b038906
avconv: factor out the output stream initialization
2015-07-19 09:38:25 +02:00
6d5d924604
avconv: move handling the 2pass logfile into avconv_opt
...
It more logically belongs there.
2015-07-19 09:34:24 +02:00
59245e0c5e
avconv: set the encoding/decoding_needed flags earlier
...
This will be useful in the following commits.
2015-07-19 09:34:08 +02:00
56c2f37727
avconv: drop update_sample_fmt()
...
There is only one decoder left that supports this (libopus, which is not
used by default since we have a native one) and this code goes against
the avconv design, since it propagates information back from the encoder
to decoder.
2015-07-19 09:33:51 +02:00
9a5e4fbec8
avconv: do not stop processing the input packet on decoding error
...
We still want to flush the filters on EOF and possibly apply streamcopy.
2015-06-27 16:45:41 +02:00
b114f6d48a
avconv: factor out flushing the filters
...
This also ensures this is always done, avoiding infinite loops if an
error occurs at the end of the input.
2015-06-27 16:45:04 +02:00
16302246b1
avconv: Add an option for automatically rotating video according to display matrix
...
The option is enabled by default, but can be disabled.
If this is enabled, such side data isn't copied into the output stream
(except when doing stream copy).
Signed-off-by: Martin Storsjö <martin@martin.st>
2015-05-02 22:09:06 +03:00
aa1a1b2496
avconv: Avoid theoretical NULL dereferences
...
Bug-Id: CID 1292519
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-04-04 19:32:10 +02:00
3892bdab9b
avconv: do not overwrite the stream codec context for streamcopy
...
Since we are not doing encoding, there is no point in ever touching the
separate encoding context. Always use the stream codec context.
Fixes writing attachments.
CC:libav-devel@libav.org
2015-04-03 13:10:03 +02:00
22a6d48b0d
avconv: Print the avfilter errors
...
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-03-20 18:42:26 +01:00
dc7536ca3d
avconv: do not abort immediately if initializing hwaccel fails
...
exit_program() will try to free the decoders, which is not a good idea
from within get_format().
Return an error instead.
2015-03-10 07:40:11 +01:00
88b32673db
avconv: copy stream-level side data when streamcopying
2014-10-24 09:03:16 +02:00
d0c0930219
avconv: Use av_gettime_relative
...
Signed-off-by: Martin Storsjö <martin@martin.st>
2014-10-24 09:53:45 +03:00
59b55c494e
lavc: deprecate unused me_threshold field
2014-10-18 05:26:56 +02:00
c92965dbfb
avconv: check return value
...
CC: libav-stable@libav.org
Bug-Id: CID 1224275
2014-10-17 09:55:46 +01:00
557d4c4eca
avconv: replace AVCodecContext.time_base with framerate
2014-10-15 06:38:16 +00:00
6cfbe1de5a
avconv: Use only audio and video to guess discontinuities
...
Data and subtitle streams might cause false positive.
2014-09-26 20:56:16 +02:00
f929ab0569
cosmetics: Write NULL pointer equality checks more compactly
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-08-15 03:18:18 -07:00
aa51b0492b
avconv: rename output_packet() to process_input_packet()
...
It more accurately describes what this function does
2014-08-13 17:24:18 +00:00
3f3232a371
avconv: set the output stream timebase
...
This is required by the new API.
2014-07-09 13:30:33 +00:00
452860d7e0
Use av_packet_rescale_ts() to simplify code.
2014-06-20 14:14:48 +02:00
71d6551e67
avconv: use the correct variable in comparison
2014-06-17 09:01:26 +02:00
48e5092133
avconv: make -shortest work with streamcopy
...
CC: libav-stable@libav.org
2014-06-12 08:17:50 +02:00
39ec5e1cf8
avconv: Report the codec and the encoder separately
...
Bug-Id: 694
2014-06-04 13:04:40 +02:00
383136264e
avconv: do not use the stream codec context for encoding
2014-06-01 08:33:21 +02:00
wm4
Anton Khirnov
Luca Barbato
Alexandra Hájková
Vittorio Giovara
Martin Storsjö
Himangi Saraogi
Gabriel Dume