This was probably broken some time ago. The breakage is now part of the
ABI. For example, we have:
AV_PIX_FMT_XYZ12BE
AV_PIX_FMT_NV16
AV_PIX_FMT_NV20LE
AV_PIX_FMT_NV20LE is wrong. It has the value 113, but as little-endian
format it should be even. This must have been quite obvious when these
formats were added (because of the AV_PIX_FMT_XYZ12BE entry), but
nobody cared or knew about this.
The future libavutil major bump will also break this additionally,
because disabling FF_API_VDPAU will remove an odd number of entries from
the middle of the enum.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Silences warning(s) like:
libavcodec/x86/fft.asm:93: warning: section flags ignored on
section redeclaration
The cause of this warning is that because `struc` and `endstruc`
attempts to revert to the previous section state [1].
The section state is stored in the macro __SECT__, defined by
x86inc.asm to be `.note.GNU-stack ...`, through the `SECTION`
directive [2].
Thus, the `.note.GNU-stack` section is defined twice
(once in x86inc.asm, once during `endstruc`), causing the warning.
That is the first part of the commit: using the primitive `[section]` format
for .note.GNU-stack etc., which does not update `__SECT__` [2].
That fixes only half of the problem. Even without any `SECTION` directives,
`__SECT__` is predefined as `.text`, which conflicting with the later
`SECTION_TEXT` (which expands to `.text align=16`).
[1]: http://www.nasm.us/doc/nasmdoc6.html#section-6.4
[2]: http://www.nasm.us/doc/nasmdoc6.html#section-6.3
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Useful to understand where and in what execution state a certain message
is generated. It is enabled only when optimizations are disabled, since
function names are not printed otherwise.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This will allow to copy the matrix as is and it is just cleaner to keep
the matrix in the same order specified by the mov standard (which is
also explicitly described in the documentation).
In order to preserve compatibility, flip the angle sign in the display API
av_display_rotation_set() and av_display_rotation_get(), and improve the
documentation mentioning the rotation direction.
When all the codepaths using manually set .arch/.fpu code is
behind runtime detection, the elf attributes should be suppressed.
This allows tools to know that the final built binary doesn't
strictly require these extensions.
Signed-off-by: Martin Storsjö <martin@martin.st>
add ARM code for implementing av_clip_intp2 using the ssat instruction
on Cortex-A8, av_clip_intp2_arm() is faster than av_clip_intp2_c() and
the generic av_clip(), about -19%
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
there already is a function, av_clip_uintp2() that clips a signed integer
to an unsigned power-of-two range, i.e. 0,2^p-1
this patch adds a function av_clip_intp2() that clips a signed integer
to a signed power-of-two range, i.e. -(2^p),(2^p-1)
the new function can be used as a special case for av_clip(), e.g.
av_clip(x, -8192, 8191) can be rewritten as av_clip_intp2(x, 13)
there are ARM instructions, usat and ssat resp., which map nicely to these
functions (see next patch)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This uses explicit memory copying to read and write pointer to pointers
of arbitrary object types. This works provided that the architecture
uses the same representation for all pointer types (the previous code
made that assumption already anyway).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
A redundant check has been dropped from av_image_fill_arrays().
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The buffer pool has to atomically add and remove entries from the linked
list of available buffers. This was done by removing the entire list
with a CAS operation, working on it, and then setting it back again
(using a retry-loop in case another thread was doing the same thing).
This could effectively cause memory leaks: while a thread was working on
the buffer list, other threads would allocate new buffers, increasing
the pool's total size. There was no real leak, but since these extra
buffers were not needed, but not free'd either (except when the buffer
pool was destroyed), this had the same effects as a real leak. For some
reason, growth was exponential, and could easily kill the process due
to OOM in real-world uses.
Fix this by using a mutex to protect the list operations. The fancy
way atomics remove the whole list to work on it is not needed anymore,
which also avoids the situation which was causing the leak.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also add no-op fallbacks when threading is disabled.
This helps keeping the code clean if Libav is compiled for targets
without threading. Since we assume that no threads of any kind are used
in such configurations, doing nothing is ok by definition.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
This doesn't add any dependency on library internals, since this
only is a static inline function that gets built into each of the
calling functions - this is only to reduce the code duplication.
Signed-off-by: Martin Storsjö <martin@martin.st>
gmtime isn't thread safe in general. In msvcrt (which lacks gmtime_r),
the buffer used by gmtime is thread specific though.
One call to localtime is left in avconv_opt.c, where thread safety
shouldn't matter (instead of making avconv depend on the libavutil
internal header).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows writing most code as if they always are is available.
These are ok to use from other libraries even though it's not a
public header, since they only provide an inline declaration, and
doesn't add an actual dependency on lavu internals. (This can be
considered more a build system compatibility fallback than a
libavutil feature.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Since av_gettime() is used in a number of places where actual
real time clock is required, the monotonic clock introduced in
ebef9f5a5 would have consequences that are hard to handle. Instead
split it into a separate function that can be used in the cases
where only relative time is desired.
On platform where no monotonic clock is available, the difference
between the two av_gettime functions is not clear, and one could
mistakenly use the relative clock where an absolute one is
required. Therefore add an offset, to make it evident that the
time returned from av_gettime_relative never is actual current
real time, even though it is based on av_gettime.
Based on a patch by Olivier Langlois.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to support metadata being set as an option, it's necessary to be able
to set dictionaries as values.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.
libavutil/cpu-test prints raw and effective cpu flags to STDERR. Detected
cpu flags can be useful for debugging fate errors.
No comparison of the result against a expected result since that would
require fate config specific references.
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in butterflies_float_c() / ff_butterflies_float_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1542.8 43.7 1470.5 41.5 100.0% +4.9%
butterflies_float 130.0 11.9 70.2 12.1 100.0% +85.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
I benchmarked the result by measuring the number of gperftools samples that
hit anywhere in the AAC decoder (starting from aac_decode_frame()) or
specifically in vector_fmul_window_c() / ff_vector_fmul_window_vfp() for the
same sample AAC stream:
Before After
Mean StdDev Mean StdDev Confidence Change
Audio decode 1598.2 47.4 1529.2 25.4 100.0% +4.5%
vector_fmul_window 244.0 22.1 188.9 22.3 100.0% +29.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
Categorize the enum and functions as "audio-related".
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
When running on a 64 bit kernel, /proc/cpuinfo lists different
optional features than on 32 bit kernels (because some of them
are mandatory in the 64 bit implemenations).
The kernel does list the old features properly if they are queried
via /proc/self/auxv though - however this file is not always readable
(e.g. on most android systems). The getauxval function could also
provide the same info as /proc/self/auxv even if this file isn't
readable, but this function is not always available (and thus would
need to be loaded with dlsym for compatibility with older android
versions).
The android cpufeatures library does this slightly differently,
by assuming that these are available if the "CPU architecture"
line is >= 8, see [1] for details.
It has been suggested to include the old, non-optional features in
/proc/cpuinfo as well, but that suggested patch never was merged.
See [2] for the discussion around this suggestion.
[1] https://android-review.googlesource.com/91380
[2] http://marc.info/?l=linux-arm-kernel&m=139087240101974
Signed-off-by: Martin Storsjö <martin@martin.st>
Both gnu as and clang treat lines starting with '#' as comments if they
aren't consumed by the C-style preprocessor.
Using '//' does not work with clang since comments are removed before
macro expansion.
Blackfin is a painful platform to work with, no test machines are available
and the range of multimedia applications is dubious. Thus it only represents
a maintenance burden.
