Add command 'delays' to the adelay filter.
This command accepts same values as the option with one difference, to apply
delay to all channels prefix 'all:' to the argument.
Signed-off-by: David Lacko <deiwo101@gmail.com>
This reduces sibilance distortion when sibilance and bass are
present at the same time. Bringing the protection of high
frequencies up to about the same level as for low frequencies
should also make the quality less dependent on the frequency
balance of the playback system.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
Ignore more samples that are near the edge of the block. The reason
is that the filtering tends to cause these samples to go above the
window more than the samples near the middle. If these samples are
included in the unwindowed peak estimation, the peak can be
overestimated. Because the block is windowed again before
overlapping, overshoots near the edge of the block are not very
important.
0.1 is the value from the version originally contributed to calf.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
With a complex FFT instead of real FFT, the negative frequencies
are not dropped from the spectrum output, so they need to be scaled
when the positive frequencies are scaled. The location of the top
bin is also different.
Signed-off-by: Jason Jang <jcj83429@gmail.com>
This can fill VAProcPipelineParameterBuffer correctly and make the
pipeline works.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Overlay one video on the top of another.
It takes two inputs and has one output. The first input is the "main" video on
which the second input is overlaid. This filter requires same memory layout for
all the inputs.
An example command to use this filter to overlay overlay.mp4 at the top-left
corner of the main.mp4:
ffmpeg -init_hw_device vaapi=foo:/dev/dri/renderD128 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i main.mp4 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i overlay.mp4 \
-filter_complex "[0:v][1:v]overlay_vaapi=0:0:100💯0.5[t1]" \
-map "[t1]" -an -c:v h264_vaapi -y out_vaapi.mp4
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Zachary Zhou <zachary.zhou@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
To trigger this bug, use `paletteuse=dither=bayer:bayer_scale=0`; you will see
that adjacent pixel lines will use the same dither pattern, instead of being
shifted from each other by 32 units (0x20).
One way to demostrate the bug is:
$ convert -size 64x256 gradient:black-white -rotate 270 grad.png
$ echo 'P2 2 1 255 0 255' > bw.pnm
$ ffmpeg -i grad.png -filter_complex 'movie=bw.pnm,scale=256x1[bw]; [0:v][bw]paletteuse=dither=bayer:bayer_scale=0' gradbw.png
Previously: https://www.rm.cloudns.org/img/uploaded/0bd152c11b9cd99e5945115534b1bdde.png
Now: https://www.rm.cloudns.org/img/uploaded/89caaa5e36c38bc2c01755b30811f969.png
This was caused by passing inconsistent color vs (a,r,g,b) parameters to
color_get(), and NBITS being 5 meaning actually hitting the same cache node
does happen in this case, but ONLY if bayer_scale is zero.
The fix is passing the correct color value to color_get().
Also added a previous-failing FATE test; image comparison of the first frame:
Previously: https://www.rm.cloudns.org/img/uploaded/d0ff9db8d8a7d8a3b8b88bbe92bf5fed.png
Now: https://www.rm.cloudns.org/img/uploaded/a72389707e719b5cd1c58916a9e79ca8.png
(on this less synthetic test image, the bug basically causes noise from cache
hits vs misses)
Tested: FATE passes, which exercises this filter but at the default bayer_scale.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
This resulted in a dimmed tonemapping due to bad resulting luma
calculation.
Found by: Derek Buitenhuis
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
For DeinterlacingBob mode with rate=field, the frame number of output
should equal 2x input total since only intra deinterlace is used.
Currently for "backward_ref = 0, rate = field", extra_delay is
introduced. Due to the async without flush, frame number of output is
[expected_number - 2].
Specifically, if the input only has 1 frame, the output will be empty.
Add deint_vaapi_request_frame for deinterlace_vaapi, send NULL frame
to flush the queued frame.
For 1 frame input in Bob mode with rate=field,
before patch: 0 frame;
after patch: 2 frames;
ffmpeg -hwaccel vaapi -hwaccel_device /dev/dri/renderD128
-hwaccel_output_format vaapi -i input.h264 -an -vf
deinterlace_vaapi=mode=bob:rate=field -f null -
Tested-by: Mark Thompson <sw@jkqxz.net>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
This was accidentally comparing s->colorspace against out->colorspace,
which is wrong - the intent was to compare in->colorspace against
out->colorspace.
We also forgot to strip mastering metadata. Finally, the order is sort
of wrong - we should strip this side data *before* process_frames,
because otherwise it may end up being seen and used by libplacebo.
Signed-off-by: Niklas Haas <git@haasn.dev>
Commit 8b83dad82512a6948b63408f964463b063ad24c9 introduced a
regression in a way that scaling via vpp_qsv doesn't work any longer
for devices with an MSDK runtime version lower than 1.19. This is true
for older CPUs which are stuck at 1.11.
The commit added checks for the compile-sdk version but it didn't test
for the runtime version.
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
This commit adds a blend_vulkan filter and a normal blend mode, and
reserves support for introducing the blend modes in the future.
Use the commands below to test: (href: https://trac.ffmpeg.org/wiki/Blend)
I. make an image for test
ffmpeg -f lavfi -i color=s=256x256,geq=r='H-1-Y':g='H-1-Y':b='H-1-Y' -frames 1 \
-y -pix_fmt yuv420p test.jpg
II. blend in sw
ffmpeg -i test.jpg -vf "split[a][b];[b]transpose[b];[a][b]blend=all_mode=normal,\
pseudocolor=preset=turbo" -y normal_sw.jpg
III. blend in vulkan
ffmpeg -init_hw_device vulkan -i test.jpg -vf "split[a][b];[b]transpose[b];\
[a]hwupload[a];[b]hwupload[b];[a][b]blend_vulkan=all_mode=normal,hwdownload,\
format=yuv420p,pseudocolor=preset=turbo" -y normal_vulkan.jpg
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
libplacebo supports automatic dolby vision application, but it requires
us to switch to a new API. Also add some logic to strip the dolby vision
metadata from the output frames in any case where we end up changing the
colorimetry.
The libplacebo dependency bump is justified because neither 184 nor 192
are part of any stable libplacebo release, so users have to build from
git anyways for this filter to exist.
Signed-off-by: Niklas Haas <git@haasn.dev>
- No longer mixes u8 and u16 component accesses (this was UB)
- De-duplicated 8->16 conversion
- De-duplicated component -> plane+offset conversion
- De-duplicated planar + packed RGB
- No longer calls ff_fill_rgba_map
- Removed redundant comp_mask data member
- RGB0 and related formats no longer write an alpha value to the 0 byte
- Non-planar YA formats now work correctly
- High-bit-depth semi-planar YUV now works correctly
Same outputs, but computed instead of statically known, so new formats will be
supported more easily. Asserts in place to ensure we update this if we add
anything incompatible with its logic.
This allows to remove the spurious dependencies of mpegvideo encoders
on error_resilience; some other components that do not use mpegvideo
to its fullest turned out to not need it either.
Adding a new CONFIG_EXTRA needs a reconfigure to take effect.
In order to force this a few unnecessary headers from lavfi/allfilters.c
have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fix warning caused by this field changing from uint64_t to uint16_t.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
