Use the hls_close function to reduce code duplication.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is needed for the following commit.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Commit 04964ac311 ("avformat/hls: Fix missing streams in some
cases with MPEG TS") caused a regression where subdemuxer streams that
use probing (e.g. dts/eac3/mp2 in mpegts) no longer get probed properly.
This is because the codec parameters from the subdemuxer stream, once
probed, are not passed on to the main stream.
Fix that by updating the codec parameters if the codec id changes.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
AVCodecParameters.sample_rate is a signed integer, so
XMVAudioPacket.sample_rate should be, too.
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Also check for errors from avpriv_mpeg4audio_get_config in
ff_mp4_read_dec_config_descr.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
fate-aac-al07_96 fails if sample_rate == 0 is rejected in
ff_mov_read_stsd_entries.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes: error: dereferencing pointer to incomplete type
Tested-by: Dave Yeo <daveryeo@telus.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is required since some programs are not able to correctly recognize
the metadata. See H.222, 2.6.58 Metadata pointer descriptor.
putstr8() is modified in order to allow to skip writing the string
length.
This should be more useful for users since numerical values for channel
layout can be confusing and unintuitive.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Metadata streams have priv_data set to NULL.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When ffplay is used to play from the RTSP URL that serves 24 bit audio
content, ffplay fails to recognize the audio codec format. The attached
patch adds support for playing 24 bit audio content over RTSP by
defining a dynamic payload handler for "L24".
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The bitstream filters do not work with merged in side data
This leaves the input packet split if it is being split.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit fba2a8a254.
The changes were right for av_write_frame() but not for av_interleaved_write_frame().
The following commit will fix this in a simpler way.
Signed-off-by: James Almer <jamrial@gmail.com>
Similarly, merge it back before returning.
Fixes ticket #5927.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
According to spec ISO_IEC_15444_12 "For any media stream for which no segment index is present, referred to as non‐indexed stream, the media stream associated with the first Segment Index box in the segment serves as a reference stream in a sense that it also describes the subsegments for any non‐indexed media stream."
Signed-off-by: Sasi Inguva <isasi@google.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The parser depends on the codec and thus must not be used with a different one.
If it is, the 'avctx->codec_id == s->parser->codec_ids[0] ...' assert in
av_parser_parse2 gets triggered.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This avoids potential rounding errors and guarantees the source aspect
ratio is preserved.
Keep writing pixel values when Stereo 3D Mode is enabled and for WebM,
as the format doesn't support anything else.
This fixes ticket #5743, implementing the suggestion from ticket #5903.
Signed-off-by: James Almer <jamrial@gmail.com>
This avoids continuity check failures in concatenated streams
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes remuxing apng streams coming from the apng demuxer.
This is a regression since 940b8908b9.
Found-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If there are no index entries, e_old = st->index_entries is only one
byte large, since it was created by av_realloc called with size 0.
Thus accessing e_old[0].timestamp causes a heap buffer overflow.
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
Fixes ticket #5915.
This fixes creating apng files, which is broken since commit
5ef1959080.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a15
Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>
Some people seem to oppose this the patch seems to have been missed for a month on the ML
lets restart the discussion and solve this after the release
This reverts commit e936c8d176.
Allowing larger timestamps makes it impossible to calculate basic things like the
difference of 2 timestamps or their sum without checking each individual computation for
overflow.
This should avoid a significant number of overflow checks
Fixes Ticket5136
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current code doesn't initialize AVPacket::pos. Made it point to FLVTAG so flv_read_packet can decode from pos
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
3 parts:
- Supports multiple chapter streams
- Exports regular text chapter streams as opaque data. This prevents consumers
from showing chapters as if they were regular subtitle streams.
- Exports video chapter streams as thumbnails, and provides the first one as
an attached_pic.
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
It is negative, so can't be used for left shifting.
This fixes ubsan runtime error: shift exponent -1 is negative
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add new mime types AAL2-G726 for g726 as suggested in rfc 3551.
This patch will break interaction with applications that incorrectly
use big-endian G.726 with mime type G726 but we know of at least one
device (DVTel camera) that correctly implements the rfc, so do the same.
Fixes ticket #5890.
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also check for possible overflows.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
It can be unset in avcodec_parameters_from_context and a value of 0
causes SIGFPE crashes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix problem to fail by a RTMP Control Message except "Set Chunk Size (1)" after an RTMP handshake. When 'nginx-rtmp-module' relays an RTMP, it sends not only control message 'Set Chunk Size (1)' but also 'Window Acknowledgement Size (5)'.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Read video_line_map from MXF generic picture essence descriptor and use
it to derive the coded field order. Use field_dominance to derive the
display field order from coded field order. If field_dominance is not
available the default value "1" is used as defined in SMPTE S377-1.
Fixes field_order detection for a bunch of DV/DVCPRO files. The heuristic
for deriving coded field order from video_line_map is inspired by
MediaInfo.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Negative values don't make sense and too large values can cause
overflows. For AV_CODEC_ID_ADPCM_THP this leads to a too small extradata
buffer being allocated, causing out-of-bounds writes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Its impossible to update the filesize & duration values if seekback is not
possible as with live streams
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If probe_codec is called with pkt == NULL, it sets probe_packets to 0
and request_probe to -1.
However, request_probe can change when calling s->iformat->read_packet
and thus a probe_packets value of 0 doesn't guarantee a request_probe
value of -1.
In that case calling probe_codec again is necessary to prevent
triggering the assert.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This way it's more clear what the default values refer to, as
Undetermined/Unspecified is 0 for some, 2 for others.
Signed-off-by: James Almer <jamrial@gmail.com>
Andreas Cadhalpun
Anssi Hannula
fuqiuping
Michael Niedermayer
Stefano Sabatini
James Almer
liu jc
Timur Aydin
Matt Oliver
Carl Eugen Hoyos
Sasi Inguva
Rodger Combs
rogerdpack
Adriano Pallavicino
Mark Thompson
Stephen Hutchinson
Suman-
Carlos Fernandez
Hiroyuki OYAMA
Mark Reid
Tobias Rapp
Steven Liu
Derek Buitenhuis
Jean Caillé
Jon Toohill
Zhao Zhili