mirror of
https://github.com/ceph/ceph
synced 2024-12-18 01:16:55 +00:00
59bdada5d5
If provided, set the OSD device_class at OSD creation time. This is simpler than writing a file that the OSD has to read in and use to set its initial device class, and also avoids a bit of sticky state at the OSD that will make it keep trying to reset its device class on startup if it ever gets cleared. Note that we now ignore json input fields we don't understand, so remove a test case. Signed-off-by: Sage Weil <sage@redhat.com>
554 lines
17 KiB
ReStructuredText
554 lines
17 KiB
ReStructuredText
===================
|
|
Manual Deployment
|
|
===================
|
|
|
|
All Ceph clusters require at least one monitor, and at least as many OSDs as
|
|
copies of an object stored on the cluster. Bootstrapping the initial monitor(s)
|
|
is the first step in deploying a Ceph Storage Cluster. Monitor deployment also
|
|
sets important criteria for the entire cluster, such as the number of replicas
|
|
for pools, the number of placement groups per OSD, the heartbeat intervals,
|
|
whether authentication is required, etc. Most of these values are set by
|
|
default, so it's useful to know about them when setting up your cluster for
|
|
production.
|
|
|
|
Following the same configuration as `Installation (Quick)`_, we will set up a
|
|
cluster with ``node1`` as the monitor node, and ``node2`` and ``node3`` for
|
|
OSD nodes.
|
|
|
|
|
|
|
|
.. ditaa::
|
|
/------------------\ /----------------\
|
|
| Admin Node | | node1 |
|
|
| +-------->+ |
|
|
| | | cCCC |
|
|
\---------+--------/ \----------------/
|
|
|
|
|
| /----------------\
|
|
| | node2 |
|
|
+----------------->+ |
|
|
| | cCCC |
|
|
| \----------------/
|
|
|
|
|
| /----------------\
|
|
| | node3 |
|
|
+----------------->| |
|
|
| cCCC |
|
|
\----------------/
|
|
|
|
|
|
Monitor Bootstrapping
|
|
=====================
|
|
|
|
Bootstrapping a monitor (a Ceph Storage Cluster, in theory) requires
|
|
a number of things:
|
|
|
|
- **Unique Identifier:** The ``fsid`` is a unique identifier for the cluster,
|
|
and stands for File System ID from the days when the Ceph Storage Cluster was
|
|
principally for the Ceph Filesystem. Ceph now supports native interfaces,
|
|
block devices, and object storage gateway interfaces too, so ``fsid`` is a
|
|
bit of a misnomer.
|
|
|
|
- **Cluster Name:** Ceph clusters have a cluster name, which is a simple string
|
|
without spaces. The default cluster name is ``ceph``, but you may specify
|
|
a different cluster name. Overriding the default cluster name is
|
|
especially useful when you are working with multiple clusters and you need to
|
|
clearly understand which cluster your are working with.
|
|
|
|
For example, when you run multiple clusters in a `federated architecture`_,
|
|
the cluster name (e.g., ``us-west``, ``us-east``) identifies the cluster for
|
|
the current CLI session. **Note:** To identify the cluster name on the
|
|
command line interface, specify the Ceph configuration file with the
|
|
cluster name (e.g., ``ceph.conf``, ``us-west.conf``, ``us-east.conf``, etc.).
|
|
Also see CLI usage (``ceph --cluster {cluster-name}``).
|
|
|
|
- **Monitor Name:** Each monitor instance within a cluster has a unique name.
|
|
In common practice, the Ceph Monitor name is the host name (we recommend one
|
|
Ceph Monitor per host, and no commingling of Ceph OSD Daemons with
|
|
Ceph Monitors). You may retrieve the short hostname with ``hostname -s``.
|
|
|
|
- **Monitor Map:** Bootstrapping the initial monitor(s) requires you to
|
|
generate a monitor map. The monitor map requires the ``fsid``, the cluster
|
|
name (or uses the default), and at least one host name and its IP address.
|
|
|
|
- **Monitor Keyring**: Monitors communicate with each other via a
|
|
secret key. You must generate a keyring with a monitor secret and provide
|
|
it when bootstrapping the initial monitor(s).
|
|
|
|
- **Administrator Keyring**: To use the ``ceph`` CLI tools, you must have
|
|
a ``client.admin`` user. So you must generate the admin user and keyring,
|
|
and you must also add the ``client.admin`` user to the monitor keyring.
|
|
|
|
The foregoing requirements do not imply the creation of a Ceph Configuration
|
|
file. However, as a best practice, we recommend creating a Ceph configuration
|
|
file and populating it with the ``fsid``, the ``mon initial members`` and the
|
|
``mon host`` settings.
|
|
|
|
You can get and set all of the monitor settings at runtime as well. However,
|
|
a Ceph Configuration file may contain only those settings that override the
|
|
default values. When you add settings to a Ceph configuration file, these
|
|
settings override the default settings. Maintaining those settings in a
|
|
Ceph configuration file makes it easier to maintain your cluster.
|
|
|
|
The procedure is as follows:
|
|
|
|
|
|
#. Log in to the initial monitor node(s)::
|
|
|
|
ssh {hostname}
|
|
|
|
For example::
|
|
|
|
ssh node1
|
|
|
|
|
|
#. Ensure you have a directory for the Ceph configuration file. By default,
|
|
Ceph uses ``/etc/ceph``. When you install ``ceph``, the installer will
|
|
create the ``/etc/ceph`` directory automatically. ::
|
|
|
|
ls /etc/ceph
|
|
|
|
**Note:** Deployment tools may remove this directory when purging a
|
|
cluster (e.g., ``ceph-deploy purgedata {node-name}``, ``ceph-deploy purge
|
|
{node-name}``).
|
|
|
|
#. Create a Ceph configuration file. By default, Ceph uses
|
|
``ceph.conf``, where ``ceph`` reflects the cluster name. ::
|
|
|
|
sudo vim /etc/ceph/ceph.conf
|
|
|
|
|
|
#. Generate a unique ID (i.e., ``fsid``) for your cluster. ::
|
|
|
|
uuidgen
|
|
|
|
|
|
#. Add the unique ID to your Ceph configuration file. ::
|
|
|
|
fsid = {UUID}
|
|
|
|
For example::
|
|
|
|
fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993
|
|
|
|
|
|
#. Add the initial monitor(s) to your Ceph configuration file. ::
|
|
|
|
mon initial members = {hostname}[,{hostname}]
|
|
|
|
For example::
|
|
|
|
mon initial members = node1
|
|
|
|
|
|
#. Add the IP address(es) of the initial monitor(s) to your Ceph configuration
|
|
file and save the file. ::
|
|
|
|
mon host = {ip-address}[,{ip-address}]
|
|
|
|
For example::
|
|
|
|
mon host = 192.168.0.1
|
|
|
|
**Note:** You may use IPv6 addresses instead of IPv4 addresses, but
|
|
you must set ``ms bind ipv6`` to ``true``. See `Network Configuration
|
|
Reference`_ for details about network configuration.
|
|
|
|
#. Create a keyring for your cluster and generate a monitor secret key. ::
|
|
|
|
ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *'
|
|
|
|
|
|
#. Generate an administrator keyring, generate a ``client.admin`` user and add
|
|
the user to the keyring. ::
|
|
|
|
sudo ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --set-uid=0 --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *'
|
|
|
|
#. Generate a bootstrap-osd keyring, generate a ``client.bootstrap-osd`` user and add
|
|
the user to the keyring. ::
|
|
|
|
sudo ceph-authtool --create-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring --gen-key -n client.bootstrap-osd --cap mon 'profile bootstrap-osd'
|
|
|
|
#. Add the generated keys to the ``ceph.mon.keyring``. ::
|
|
|
|
sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring
|
|
sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring
|
|
|
|
#. Generate a monitor map using the hostname(s), host IP address(es) and the FSID.
|
|
Save it as ``/tmp/monmap``::
|
|
|
|
monmaptool --create --add {hostname} {ip-address} --fsid {uuid} /tmp/monmap
|
|
|
|
For example::
|
|
|
|
monmaptool --create --add node1 192.168.0.1 --fsid a7f64266-0894-4f1e-a635-d0aeaca0e993 /tmp/monmap
|
|
|
|
|
|
#. Create a default data directory (or directories) on the monitor host(s). ::
|
|
|
|
sudo mkdir /var/lib/ceph/mon/{cluster-name}-{hostname}
|
|
|
|
For example::
|
|
|
|
sudo -u ceph mkdir /var/lib/ceph/mon/ceph-node1
|
|
|
|
See `Monitor Config Reference - Data`_ for details.
|
|
|
|
#. Populate the monitor daemon(s) with the monitor map and keyring. ::
|
|
|
|
sudo -u ceph ceph-mon [--cluster {cluster-name}] --mkfs -i {hostname} --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
|
|
|
|
For example::
|
|
|
|
sudo -u ceph ceph-mon --mkfs -i node1 --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
|
|
|
|
|
|
#. Consider settings for a Ceph configuration file. Common settings include
|
|
the following::
|
|
|
|
[global]
|
|
fsid = {cluster-id}
|
|
mon initial members = {hostname}[, {hostname}]
|
|
mon host = {ip-address}[, {ip-address}]
|
|
public network = {network}[, {network}]
|
|
cluster network = {network}[, {network}]
|
|
auth cluster required = cephx
|
|
auth service required = cephx
|
|
auth client required = cephx
|
|
osd journal size = {n}
|
|
osd pool default size = {n} # Write an object n times.
|
|
osd pool default min size = {n} # Allow writing n copies in a degraded state.
|
|
osd pool default pg num = {n}
|
|
osd pool default pgp num = {n}
|
|
osd crush chooseleaf type = {n}
|
|
|
|
In the foregoing example, the ``[global]`` section of the configuration might
|
|
look like this::
|
|
|
|
[global]
|
|
fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993
|
|
mon initial members = node1
|
|
mon host = 192.168.0.1
|
|
public network = 192.168.0.0/24
|
|
auth cluster required = cephx
|
|
auth service required = cephx
|
|
auth client required = cephx
|
|
osd journal size = 1024
|
|
osd pool default size = 3
|
|
osd pool default min size = 2
|
|
osd pool default pg num = 333
|
|
osd pool default pgp num = 333
|
|
osd crush chooseleaf type = 1
|
|
|
|
#. Touch the ``done`` file.
|
|
|
|
Mark that the monitor is created and ready to be started::
|
|
|
|
sudo touch /var/lib/ceph/mon/ceph-node1/done
|
|
|
|
#. Start the monitor(s).
|
|
|
|
For most distributions, services are started via systemd now::
|
|
|
|
sudo systemctl start ceph-mon@node1
|
|
|
|
For Ubuntu Trusty, use Upstart::
|
|
|
|
sudo start ceph-mon id=node1 [cluster={cluster-name}]
|
|
|
|
In this case, to allow the start of the daemon at each reboot you
|
|
must create two empty files like this::
|
|
|
|
sudo touch /var/lib/ceph/mon/{cluster-name}-{hostname}/upstart
|
|
|
|
For example::
|
|
|
|
sudo touch /var/lib/ceph/mon/ceph-node1/upstart
|
|
|
|
For older Debian/CentOS/RHEL, use sysvinit::
|
|
|
|
sudo /etc/init.d/ceph start mon.node1
|
|
|
|
|
|
#. Verify that the monitor is running. ::
|
|
|
|
ceph -s
|
|
|
|
You should see output that the monitor you started is up and running, and
|
|
you should see a health error indicating that placement groups are stuck
|
|
inactive. It should look something like this::
|
|
|
|
cluster:
|
|
id: a7f64266-0894-4f1e-a635-d0aeaca0e993
|
|
health: HEALTH_OK
|
|
|
|
services:
|
|
mon: 1 daemons, quorum node1
|
|
mgr: node1(active)
|
|
osd: 0 osds: 0 up, 0 in
|
|
|
|
data:
|
|
pools: 0 pools, 0 pgs
|
|
objects: 0 objects, 0 bytes
|
|
usage: 0 kB used, 0 kB / 0 kB avail
|
|
pgs:
|
|
|
|
|
|
**Note:** Once you add OSDs and start them, the placement group health errors
|
|
should disappear. See `Adding OSDs`_ for details.
|
|
|
|
Manager daemon configuration
|
|
============================
|
|
|
|
On each node where you run a ceph-mon daemon, you should also set up a ceph-mgr daemon.
|
|
|
|
See :ref:`mgr-administrator-guide`
|
|
|
|
Adding OSDs
|
|
===========
|
|
|
|
Once you have your initial monitor(s) running, you should add OSDs. Your cluster
|
|
cannot reach an ``active + clean`` state until you have enough OSDs to handle the
|
|
number of copies of an object (e.g., ``osd pool default size = 2`` requires at
|
|
least two OSDs). After bootstrapping your monitor, your cluster has a default
|
|
CRUSH map; however, the CRUSH map doesn't have any Ceph OSD Daemons mapped to
|
|
a Ceph Node.
|
|
|
|
|
|
Short Form
|
|
----------
|
|
|
|
Ceph provides the ``ceph-volume`` utility, which can prepare a logical volume, disk, or partition
|
|
for use with Ceph. The ``ceph-volume`` utility creates the OSD ID by
|
|
incrementing the index. Additionally, ``ceph-volume`` will add the new OSD to the
|
|
CRUSH map under the host for you. Execute ``ceph-volume -h`` for CLI details.
|
|
The ``ceph-volume`` utility automates the steps of the `Long Form`_ below. To
|
|
create the first two OSDs with the short form procedure, execute the following
|
|
on ``node2`` and ``node3``:
|
|
|
|
bluestore
|
|
^^^^^^^^^
|
|
#. Create the OSD. ::
|
|
|
|
ssh {node-name}
|
|
sudo ceph-volume lvm create --data {data-path}
|
|
|
|
For example::
|
|
|
|
ssh node1
|
|
sudo ceph-volume lvm create --data /dev/hdd1
|
|
|
|
Alternatively, the creation process can be split in two phases (prepare, and
|
|
activate):
|
|
|
|
#. Prepare the OSD. ::
|
|
|
|
ssh {node-name}
|
|
sudo ceph-volume lvm prepare --data {data-path} {data-path}
|
|
|
|
For example::
|
|
|
|
ssh node1
|
|
sudo ceph-volume prepare --data /dev/hdd1
|
|
|
|
Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for
|
|
activation. These can be obtained by listing OSDs in the current server::
|
|
|
|
sudo ceph-volume lvm list
|
|
|
|
#. Activate the OSD::
|
|
|
|
sudo ceph-volume lvm activate {ID} {FSID}
|
|
|
|
For example::
|
|
|
|
sudo ceph-volume lvm activate 0 a7f64266-0894-4f1e-a635-d0aeaca0e993
|
|
|
|
|
|
filestore
|
|
^^^^^^^^^
|
|
#. Create the OSD. ::
|
|
|
|
ssh {node-name}
|
|
sudo ceph-volume lvm create --filestore --data {data-path} --journal {journal-path}
|
|
|
|
For example::
|
|
|
|
ssh node1
|
|
sudo ceph-volume lvm create --filestore --data /dev/hdd1 --journal /dev/hdd2
|
|
|
|
Alternatively, the creation process can be split in two phases (prepare, and
|
|
activate):
|
|
|
|
#. Prepare the OSD. ::
|
|
|
|
ssh {node-name}
|
|
sudo ceph-volume lvm prepare --filestore --data {data-path} --journal {journal-path}
|
|
|
|
For example::
|
|
|
|
ssh node1
|
|
sudo ceph-volume prepare --filestore --data /dev/hdd1 --journal /dev/hdd2
|
|
|
|
Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for
|
|
activation. These can be obtained by listing OSDs in the current server::
|
|
|
|
sudo ceph-volume lvm list
|
|
|
|
#. Activate the OSD::
|
|
|
|
sudo ceph-volume lvm activate --filestore {ID} {FSID}
|
|
|
|
For example::
|
|
|
|
sudo ceph-volume lvm activate --filestore 0 a7f64266-0894-4f1e-a635-d0aeaca0e993
|
|
|
|
|
|
Long Form
|
|
---------
|
|
|
|
Without the benefit of any helper utilities, create an OSD and add it to the
|
|
cluster and CRUSH map with the following procedure. To create the first two
|
|
OSDs with the long form procedure, execute the following steps for each OSD.
|
|
|
|
.. note:: This procedure does not describe deployment on top of dm-crypt
|
|
making use of the dm-crypt 'lockbox'.
|
|
|
|
#. Connect to the OSD host and become root. ::
|
|
|
|
ssh {node-name}
|
|
sudo bash
|
|
|
|
#. Generate a UUID for the OSD. ::
|
|
|
|
UUID=$(uuidgen)
|
|
|
|
#. Generate a cephx key for the OSD. ::
|
|
|
|
OSD_SECRET=$(ceph-authtool --gen-print-key)
|
|
|
|
#. Create the OSD. Note that an OSD ID can be provided as an
|
|
additional argument to ``ceph osd new`` if you need to reuse a
|
|
previously-destroyed OSD id. We assume that the
|
|
``client.bootstrap-osd`` key is present on the machine. You may
|
|
alternatively execute this command as ``client.admin`` on a
|
|
different host where that key is present.::
|
|
|
|
ID=$(echo "{\"cephx_secret\": \"$OSD_SECRET\"}" | \
|
|
ceph osd new $UUID -i - \
|
|
-n client.bootstrap-osd -k /var/lib/ceph/bootstrap-osd/ceph.keyring)
|
|
|
|
It is also possible to include a ``crush_device_class`` property in the JSON
|
|
to set an initial class other than the default (``ssd`` or ``hdd`` based on
|
|
the auto-detected device type).
|
|
|
|
#. Create the default directory on your new OSD. ::
|
|
|
|
mkdir /var/lib/ceph/osd/ceph-$ID
|
|
|
|
#. If the OSD is for a drive other than the OS drive, prepare it
|
|
for use with Ceph, and mount it to the directory you just created. ::
|
|
|
|
mkfs.xfs /dev/{DEV}
|
|
mount /dev/{DEV} /var/lib/ceph/osd/ceph-$ID
|
|
|
|
#. Write the secret to the OSD keyring file. ::
|
|
|
|
ceph-authtool --create-keyring /var/lib/ceph/osd/ceph-$ID/keyring \
|
|
--name osd.$ID --add-key $OSD_SECRET
|
|
|
|
#. Initialize the OSD data directory. ::
|
|
|
|
ceph-osd -i $ID --mkfs --osd-uuid $UUID
|
|
|
|
#. Fix ownership. ::
|
|
|
|
chown -R ceph:ceph /var/lib/ceph/osd/ceph-$ID
|
|
|
|
#. After you add an OSD to Ceph, the OSD is in your configuration. However,
|
|
it is not yet running. You must start
|
|
your new OSD before it can begin receiving data.
|
|
|
|
For modern systemd distributions::
|
|
|
|
systemctl enable ceph-osd@$ID
|
|
systemctl start ceph-osd@$ID
|
|
|
|
For example::
|
|
|
|
systemctl enable ceph-osd@12
|
|
systemctl start ceph-osd@12
|
|
|
|
|
|
Adding MDS
|
|
==========
|
|
|
|
In the below instructions, ``{id}`` is an arbitrary name, such as the hostname of the machine.
|
|
|
|
#. Create the mds data directory.::
|
|
|
|
mkdir -p /var/lib/ceph/mds/{cluster-name}-{id}
|
|
|
|
#. Create a keyring.::
|
|
|
|
ceph-authtool --create-keyring /var/lib/ceph/mds/{cluster-name}-{id}/keyring --gen-key -n mds.{id}
|
|
|
|
#. Import the keyring and set caps.::
|
|
|
|
ceph auth add mds.{id} osd "allow rwx" mds "allow" mon "allow profile mds" -i /var/lib/ceph/mds/{cluster}-{id}/keyring
|
|
|
|
#. Add to ceph.conf.::
|
|
|
|
[mds.{id}]
|
|
host = {id}
|
|
|
|
#. Start the daemon the manual way.::
|
|
|
|
ceph-mds --cluster {cluster-name} -i {id} -m {mon-hostname}:{mon-port} [-f]
|
|
|
|
#. Start the daemon the right way (using ceph.conf entry).::
|
|
|
|
service ceph start
|
|
|
|
#. If starting the daemon fails with this error::
|
|
|
|
mds.-1.0 ERROR: failed to authenticate: (22) Invalid argument
|
|
|
|
Then make sure you do not have a keyring set in ceph.conf in the global section; move it to the client section; or add a keyring setting specific to this mds daemon. And verify that you see the same key in the mds data directory and ``ceph auth get mds.{id}`` output.
|
|
|
|
#. Now you are ready to `create a Ceph filesystem`_.
|
|
|
|
|
|
Summary
|
|
=======
|
|
|
|
Once you have your monitor and two OSDs up and running, you can watch the
|
|
placement groups peer by executing the following::
|
|
|
|
ceph -w
|
|
|
|
To view the tree, execute the following::
|
|
|
|
ceph osd tree
|
|
|
|
You should see output that looks something like this::
|
|
|
|
# id weight type name up/down reweight
|
|
-1 2 root default
|
|
-2 2 host node1
|
|
0 1 osd.0 up 1
|
|
-3 1 host node2
|
|
1 1 osd.1 up 1
|
|
|
|
To add (or remove) additional monitors, see `Add/Remove Monitors`_.
|
|
To add (or remove) additional Ceph OSD Daemons, see `Add/Remove OSDs`_.
|
|
|
|
|
|
.. _federated architecture: ../../radosgw/federated-config
|
|
.. _Installation (Quick): ../../start
|
|
.. _Add/Remove Monitors: ../../rados/operations/add-or-rm-mons
|
|
.. _Add/Remove OSDs: ../../rados/operations/add-or-rm-osds
|
|
.. _Network Configuration Reference: ../../rados/configuration/network-config-ref
|
|
.. _Monitor Config Reference - Data: ../../rados/configuration/mon-config-ref#data
|
|
.. _create a Ceph filesystem: ../../cephfs/createfs
|