ceph/PendingReleaseNotes
Sage Weil dd61a7f737 Merge pull request #16189 from bassam/pr-msgr-bind-addr
mon: add support public_bind_addr option

Reviewed-by: Sage Weil <sage@redhat.com>
2017-07-16 21:26:23 -05:00

213 lines
10 KiB
Plaintext

>= 12.0.0
------
* The "journaler allow split entries" config setting has been removed.
* The 'apply' mode of cephfs-journal-tool has been removed
* Added new configuration "public bind addr" to support dynamic environments
like Kubernetes. When set the Ceph MON daemon could bind locally to an IP
address and advertise a different IP address "public addr" on the network.
12.0.0
------
* When assigning a network to the public network and not to
the cluster network the network specification of the public
network will be used for the cluster network as well.
In older versions this would lead to cluster services
being bound to 0.0.0.0:<port>, thus making the
cluster service even more publicly available than the
public services. When only specifying a cluster network it
will still result in the public services binding to 0.0.0.0.
* Some variants of the omap_get_keys and omap_get_vals librados
functions have been deprecated in favor of omap_get_vals2 and
omap_get_keys2. The new methods include an output argument
indicating whether there are additional keys left to fetch.
Previously this had to be inferred from the requested key count vs
the number of keys returned, but this breaks with new OSD-side
limits on the number of keys or bytes that can be returned by a
single omap request. These limits were introduced by kraken but
are effectively disabled by default (by setting a very large limit
of 1 GB) because users of the newly deprecated interface cannot
tell whether they should fetch more keys or not. In the case of
the standalone calls in the C++ interface
(IoCtx::get_omap_{keys,vals}), librados has been updated to loop on
the client side to provide a correct result via multiple calls to
the OSD. In the case of the methods used for building
multi-operation transactions, however, client-side looping is not
practical, and the methods have been deprecated. Note that use of
either the IoCtx methods on older librados versions or the
deprecated methods on any version of librados will lead to
incomplete results if/when the new OSD limits are enabled.
* In previous versions, if a client sent an op to the wrong OSD, the OSD
would reply with ENXIO. The rationale here is that the client or OSD is
clearly buggy and we want to surface the error as clearly as possible.
We now only send the ENXIO reply if the osd_enxio_on_misdirected_op option
is enabled (it's off by default). This means that a VM using librbd that
previously would have gotten an EIO and gone read-only will now see a
blocked/hung IO instead.
* When configuring ceph-fuse mounts in /etc/fstab, a new syntax is
available that uses "ceph.<arg>=<val>" in the options column, instead
of putting configuration in the device column. The old style syntax
still works. See the documentation page "Mount CephFS in your
file systems table" for details.
12.0.1
------
* The original librados rados_objects_list_open (C) and objects_begin
(C++) object listing API, deprecated in Hammer, has finally been
removed. Users of this interface must update their software to use
either the rados_nobjects_list_open (C) and nobjects_begin (C++) API or
the new rados_object_list_begin (C) and object_list_begin (C++) API
before updating the client-side librados library to Luminous.
Object enumeration (via any API) with the latest librados version
and pre-Hammer OSDs is no longer supported. Note that no in-tree
Ceph services rely on object enumeration via the deprecated APIs, so
only external librados users might be affected.
The newest (and recommended) rados_object_list_begin (C) and
object_list_begin (C++) API is only usable on clusters with the
SORTBITWISE flag enabled (Jewel and later). (Note that this flag is
required to be set before upgrading beyond Jewel.)
* The rados copy-get-classic operation has been removed since it has not been
used by the OSD since before hammer. It is unlikely any librados user is
using this operation explicitly since there is also the more modern copy-get.
* The RGW api for getting object torrent has changed its params from 'get_torrent'
to 'torrent' so that it can be compatible with Amazon S3. Now the request for
object torrent is like 'GET /ObjectName?torrent'.
* The configuration option "osd pool erasure code stripe width" has
been replaced by "osd pool erasure code stripe unit", and given the
ability to be overridden by the erasure code profile setting
"stripe_unit". For more details see "Erasure Code Profiles" in the
documentation.
* rbd and cephfs can use erasure coding with bluestore. This may be
enabled by setting 'allow_ec_overwrites' to 'true' for a pool. Since
this relies on bluestore's checksumming to do deep scrubbing,
enabling this on a pool stored on filestore is not allowed.
* The 'rados df' JSON output now prints numeric values as numbers instead of
strings.
* There was a bug introduced in Jewel (#19119) that broke the mapping behavior
when an "out" OSD that still existed in the CRUSH map was removed with 'osd rm'.
This could result in 'misdirected op' and other errors. The bug is now fixed,
but the fix itself introduces the same risk because the behavior may vary between
clients and OSDs. To avoid problems, please ensure that all OSDs are removed
from the CRUSH map before deleting them. That is, be sure to do::
ceph osd crush rm osd.123
before::
ceph osd rm osd.123
12.0.2
------
* The original librados rados_objects_list_open (C) and objects_begin
(C++) object listing API, deprecated in Hammer, has finally been
removed. Users of this interface must update their software to use
either the rados_nobjects_list_open (C) and nobjects_begin (C++) API or
the new rados_object_list_begin (C) and object_list_begin (C++) API
before updating the client-side librados library to Luminous.
Object enumeration (via any API) with the latest librados version
and pre-Hammer OSDs is no longer supported. Note that no in-tree
Ceph services rely on object enumeration via the deprecated APIs, so
only external librados users might be affected.
The newest (and recommended) rados_object_list_begin (C) and
object_list_begin (C++) API is only usable on clusters with the
SORTBITWISE flag enabled (Jewel and later). (Note that this flag is
required to be set before upgrading beyond Jewel.)
* CephFS clients without the 'p' flag in their authentication capability
string will no longer be able to set quotas or any layout fields. This
flag previously only restricted modification of the pool and namespace
fields in layouts.
* CephFS directory fragmentation (large directory support) is enabled
by default on new filesystems. To enable it on existing filesystems
use "ceph fs set <fs_name> allow_dirfrags".
* CephFS will generate a health warning if you have fewer standby daemons
than it thinks you wanted. By default this will be 1 if you ever had
a standby, and 0 if you did not. You can customize this using
``ceph fs set <fs> standby_count_wanted <number>``. Setting it
to zero will effectively disable the health check.
* The "ceph mds tell ..." command has been removed. It is superceded
by "ceph tell mds.<id> ..."
12.1.0
------
* The ``mon_osd_max_op_age`` option has been renamed to
``mon_osd_warn_op_age`` (default: 32 seconds), to indicate we
generate a warning at this age. There is also a new
``mon_osd_err_op_age_ratio`` that is a expressed as a multitple of
``mon_osd_warn_op_age`` (default: 128, for roughly 60 minutes) to
control when an error is generated.
* The default maximum size for a single RADOS object has been reduced from
100GB to 128MB. The 100GB limit was completely impractical in practice
while the 128MB limit is a bit high but not unreasonable. If you have an
application written directly to librados that is using objects larger than
128MB you may need to adjust ``osd_max_object_size``.
* The semantics of the 'rados ls' and librados object listing
operations have always been a bit confusing in that "whiteout"
objects (which logically don't exist and will return ENOENT if you
try to access them) are included in the results. Previously
whiteouts only occurred in cache tier pools. In luminous, logically
deleted but snapshotted objects now result in a whiteout object, and
as a result they will appear in 'rados ls' results, even though
trying to read such an object will result in ENOENT. The 'rados
listsnaps' operation can be used in such a case to enumerate which
snapshots are present.
This may seem a bit strange, but is less strange than having a
deleted-but-snapshotted object not appear at all and be completely
hidden from librados's ability to enumerate objects. Future
versions of Ceph will likely include an alternative object
enumeration interface that makes it more natural and efficient to
enumerate all objects along with their snapshot and clone metadata.
* The deprecated 'crush_ruleset' property has finally been removed; please use
'crush_rule' instead for the 'osd pool get ...' and 'osd pool set ..' commands.
* The 'osd pool default crush replicated ruleset' option has been
removed and replaced by the 'osd pool default crush rule' option.
By default it is -1, which means the mon will pick the first type
replicated rule in the CRUSH map for replicated pools. Erasure
coded pools have rules that are automatically created for them if they are
not specified at pool creation time.
* The `status` ceph-mgr module is enabled by default, and initially provides two
commands: `ceph tell mgr osd status` and `ceph tell mgr fs status`. These
are high level colorized views to complement the existing CLI.
12.1.1
------
* choose_args encoding has been changed to make it architecture-independent.
If you deployed Luminous dev releases or 12.1.0 rc release and made use of
the CRUSH choose_args feature, you need to remove all choose_args mappings
from your CRUSH map before starting the upgrade.
* The 'ceph health' structured output (JSON or XML) no longer contains
a 'timechecks' section describing the time sync status. This
information is now available via the 'ceph time-sync-status'
command.
* Certain extra fields in the 'ceph health' structured output that
used to appear if the mons were low on disk space (which duplicated
the information in the normal health warning messages) are now gone.
* The "ceph -w" output no longer contains audit log entries by default.
Add a "--watch-channel=audit" or "--watch-channel=*" to see them.