ceph/doc/cephfs/capabilities.rst
Patrick Donnelly e7a7cf429e
doc: filesystem to file system
"Filesystem" is not a word (although fairly common in use).

Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
2019-09-10 08:43:28 -07:00

113 lines
3.9 KiB
ReStructuredText

======================
Capabilities in CephFS
======================
When a client wants to operate on an inode, it will query the MDS in various
ways, which will then grant the client a set of **capabilities**. These
grant the client permissions to operate on the inode in various ways. One
of the major differences from other network file systems (e.g NFS or SMB) is
that the capabilities granted are quite granular, and it's possible that
multiple clients can hold different capabilities on the same inodes.
Types of Capabilities
---------------------
There are several "generic" capability bits. These denote what sort of ability
the capability grants.
::
/* generic cap bits */
#define CEPH_CAP_GSHARED 1 /* client can reads (s) */
#define CEPH_CAP_GEXCL 2 /* client can read and update (x) */
#define CEPH_CAP_GCACHE 4 /* (file) client can cache reads (c) */
#define CEPH_CAP_GRD 8 /* (file) client can read (r) */
#define CEPH_CAP_GWR 16 /* (file) client can write (w) */
#define CEPH_CAP_GBUFFER 32 /* (file) client can buffer writes (b) */
#define CEPH_CAP_GWREXTEND 64 /* (file) client can extend EOF (a) */
#define CEPH_CAP_GLAZYIO 128 /* (file) client can perform lazy io (l) */
These are then shifted by a particular number of bits. These denote a part of
the inode's data or metadata on which the capability is being granted:
::
/* per-lock shift */
#define CEPH_CAP_SAUTH 2 /* A */
#define CEPH_CAP_SLINK 4 /* L */
#define CEPH_CAP_SXATTR 6 /* X */
#define CEPH_CAP_SFILE 8 /* F */
Only certain generic cap types are ever granted for some of those "shifts",
however. In particular, only the FILE shift ever has more than the first two
bits.
::
| AUTH | LINK | XATTR | FILE
2 4 6 8
From the above, we get a number of constants, that are generated by taking
each bit value and shifting to the correct bit in the word:
::
#define CEPH_CAP_AUTH_SHARED (CEPH_CAP_GSHARED << CEPH_CAP_SAUTH)
These bits can then be or'ed together to make a bitmask denoting a set of
capabilities.
There is one exception:
::
#define CEPH_CAP_PIN 1 /* no specific capabilities beyond the pin */
The "pin" just pins the inode into memory, without granting any other caps.
Graphically:
::
+---+---+---+---+---+---+---+---+
| p | _ |As x |Ls x |Xs x |
+---+---+---+---+---+---+---+---+
|Fs x c r w b a l |
+---+---+---+---+---+---+---+---+
The second bit is currently unused.
Abilities granted by each cap
-----------------------------
While that is how capabilities are granted (and communicated), the important
bit is what they actually allow the client to do:
* PIN: this just pins the inode into memory. This is sufficient to allow the
client to get to the inode number, as well as other immutable things like
major or minor numbers in a device inode, or symlink contents.
* AUTH: this grants the ability to get to the authentication-related metadata.
In particular, the owner, group and mode. Note that doing a full permission
check may require getting at ACLs as well, which are stored in xattrs.
* LINK: the link count of the inode
* XATTR: ability to access or manipulate xattrs. Note that since ACLs are
stored in xattrs, it's also sometimes necessary to access them when checking
permissions.
* FILE: this is the big one. These allow the client to access and manipulate
file data. It also covers certain metadata relating to file data -- the
size, mtime, atime and ctime, in particular.
Shorthand
---------
Note that the client logging can also present a compact representation of the
capabilities. For example:
::
pAsLsXsFs
The 'p' represents the pin. Each capital letter corresponds to the shift
values, and the lowercase letters after each shift are for the actual
capabilities granted in each shift.