ceph/doc/man/8/ceph.rst
Sage Weil d6db84ca76 mon: hide 'osd crush rule list' (we prefer 'ls')
Signed-off-by: Sage Weil <sage@redhat.com>
2017-07-19 22:47:21 -04:00

1441 lines
29 KiB
ReStructuredText

:orphan:
==================================
ceph -- ceph administration tool
==================================
.. program:: ceph
Synopsis
========
| **ceph** **auth** [ *add* \| *caps* \| *del* \| *export* \| *get* \| *get-key* \| *get-or-create* \| *get-or-create-key* \| *import* \| *list* \| *print-key* \| *print_key* ] ...
| **ceph** **compact**
| **ceph** **config-key** [ *del* | *exists* | *get* | *list* | *dump* | *put* ] ...
| **ceph** **daemon** *<name>* \| *<path>* *<command>* ...
| **ceph** **daemonperf** *<name>* \| *<path>* [ *interval* [ *count* ] ]
| **ceph** **df** *{detail}*
| **ceph** **fs** [ *ls* \| *new* \| *reset* \| *rm* ] ...
| **ceph** **fsid**
| **ceph** **health** *{detail}*
| **ceph** **heap** [ *dump* \| *start_profiler* \| *stop_profiler* \| *release* \| *stats* ] ...
| **ceph** **injectargs** *<injectedargs>* [ *<injectedargs>*... ]
| **ceph** **log** *<logtext>* [ *<logtext>*... ]
| **ceph** **mds** [ *compat* \| *deactivate* \| *fail* \| *rm* \| *rmfailed* \| *set_state* \| *stat* \| *tell* ] ...
| **ceph** **mon** [ *add* \| *dump* \| *getmap* \| *remove* \| *stat* ] ...
| **ceph** **mon_status**
| **ceph** **osd** [ *blacklist* \| *blocked-by* \| *create* \| *new* \| *deep-scrub* \| *df* \| *down* \| *dump* \| *erasure-code-profile* \| *find* \| *getcrushmap* \| *getmap* \| *getmaxosd* \| *in* \| *lspools* \| *map* \| *metadata* \| *out* \| *pause* \| *perf* \| *pg-temp* \| *force-create-pg* \| *primary-affinity* \| *primary-temp* \| *repair* \| *reweight* \| *reweight-by-pg* \| *rm* \| *destroy* \| *purge* \| *scrub* \| *set* \| *setcrushmap* \| *setmaxosd* \| *stat* \| *tree* \| *unpause* \| *unset* ] ...
| **ceph** **osd** **crush** [ *add* \| *add-bucket* \| *create-or-move* \| *dump* \| *get-tunable* \| *link* \| *move* \| *remove* \| *rename-bucket* \| *reweight* \| *reweight-all* \| *reweight-subtree* \| *rm* \| *rule* \| *set* \| *set-tunable* \| *show-tunables* \| *tunables* \| *unlink* ] ...
| **ceph** **osd** **pool** [ *create* \| *delete* \| *get* \| *get-quota* \| *ls* \| *mksnap* \| *rename* \| *rmsnap* \| *set* \| *set-quota* \| *stats* ] ...
| **ceph** **osd** **tier** [ *add* \| *add-cache* \| *cache-mode* \| *remove* \| *remove-overlay* \| *set-overlay* ] ...
| **ceph** **pg** [ *debug* \| *deep-scrub* \| *dump* \| *dump_json* \| *dump_pools_json* \| *dump_stuck* \| *force_create_pg* \| *getmap* \| *ls* \| *ls-by-osd* \| *ls-by-pool* \| *ls-by-primary* \| *map* \| *repair* \| *scrub* \| *set_full_ratio* \| *set_nearfull_ratio* \| *stat* ] ...
| **ceph** **quorum** [ *enter* \| *exit* ]
| **ceph** **quorum_status**
| **ceph** **report** { *<tags>* [ *<tags>...* ] }
| **ceph** **scrub**
| **ceph** **status**
| **ceph** **sync** **force** {--yes-i-really-mean-it} {--i-know-what-i-am-doing}
| **ceph** **tell** *<name (type.id)> <args> [<args>...]*
| **ceph** **version**
Description
===========
:program:`ceph` is a control utility which is used for manual deployment and maintenance
of a Ceph cluster. It provides a diverse set of commands that allows deployment of
monitors, OSDs, placement groups, MDS and overall maintenance, administration
of the cluster.
Commands
========
auth
----
Manage authentication keys. It is used for adding, removing, exporting
or updating of authentication keys for a particular entity such as a monitor or
OSD. It uses some additional subcommands.
Subcommand ``add`` adds authentication info for a particular entity from input
file, or random key if no input is given and/or any caps specified in the command.
Usage::
ceph auth add <entity> {<caps> [<caps>...]}
Subcommand ``caps`` updates caps for **name** from caps specified in the command.
Usage::
ceph auth caps <entity> <caps> [<caps>...]
Subcommand ``del`` deletes all caps for ``name``.
Usage::
ceph auth del <entity>
Subcommand ``export`` writes keyring for requested entity, or master keyring if
none given.
Usage::
ceph auth export {<entity>}
Subcommand ``get`` writes keyring file with requested key.
Usage::
ceph auth get <entity>
Subcommand ``get-key`` displays requested key.
Usage::
ceph auth get-key <entity>
Subcommand ``get-or-create`` adds authentication info for a particular entity
from input file, or random key if no input given and/or any caps specified in the
command.
Usage::
ceph auth get-or-create <entity> {<caps> [<caps>...]}
Subcommand ``get-or-create-key`` gets or adds key for ``name`` from system/caps
pairs specified in the command. If key already exists, any given caps must match
the existing caps for that key.
Usage::
ceph auth get-or-create-key <entity> {<caps> [<caps>...]}
Subcommand ``import`` reads keyring from input file.
Usage::
ceph auth import
Subcommand ``ls`` lists authentication state.
Usage::
ceph auth ls
Subcommand ``print-key`` displays requested key.
Usage::
ceph auth print-key <entity>
Subcommand ``print_key`` displays requested key.
Usage::
ceph auth print_key <entity>
compact
-------
Causes compaction of monitor's leveldb storage.
Usage::
ceph compact
config-key
----------
Manage configuration key. It uses some additional subcommands.
Subcommand ``del`` deletes configuration key.
Usage::
ceph config-key del <key>
Subcommand ``exists`` checks for configuration keys existence.
Usage::
ceph config-key exists <key>
Subcommand ``get`` gets the configuration key.
Usage::
ceph config-key get <key>
Subcommand ``list`` lists configuration keys.
Usage::
ceph config-key ls
Subcommand ``dump`` dumps configuration keys and values.
Usage::
ceph config-key dump
Subcommand ``put`` puts configuration key and value.
Usage::
ceph config-key put <key> {<val>}
daemon
------
Submit admin-socket commands.
Usage::
ceph daemon {daemon_name|socket_path} {command} ...
Example::
ceph daemon osd.0 help
daemonperf
----------
Watch performance counters from a Ceph daemon.
Usage::
ceph daemonperf {daemon_name|socket_path} [{interval} [{count}]]
df
--
Show cluster's free space status.
Usage::
ceph df {detail}
fs
--
Manage cephfs filesystems. It uses some additional subcommands.
Subcommand ``ls`` to list filesystems
Usage::
ceph fs ls
Subcommand ``new`` to make a new filesystem using named pools <metadata> and <data>
Usage::
ceph fs new <fs_name> <metadata> <data>
Subcommand ``reset`` is used for disaster recovery only: reset to a single-MDS map
Usage::
ceph fs reset <fs_name> {--yes-i-really-mean-it}
Subcommand ``rm`` to disable the named filesystem
Usage::
ceph fs rm <fs_name> {--yes-i-really-mean-it}
fsid
----
Show cluster's FSID/UUID.
Usage::
ceph fsid
health
------
Show cluster's health.
Usage::
ceph health {detail}
heap
----
Show heap usage info (available only if compiled with tcmalloc)
Usage::
ceph heap dump|start_profiler|stop_profiler|release|stats
injectargs
----------
Inject configuration arguments into monitor.
Usage::
ceph injectargs <injected_args> [<injected_args>...]
log
---
Log supplied text to the monitor log.
Usage::
ceph log <logtext> [<logtext>...]
mds
---
Manage metadata server configuration and administration. It uses some
additional subcommands.
Subcommand ``compat`` manages compatible features. It uses some additional
subcommands.
Subcommand ``rm_compat`` removes compatible feature.
Usage::
ceph mds compat rm_compat <int[0-]>
Subcommand ``rm_incompat`` removes incompatible feature.
Usage::
ceph mds compat rm_incompat <int[0-]>
Subcommand ``show`` shows mds compatibility settings.
Usage::
ceph mds compat show
Subcommand ``deactivate`` stops mds.
Usage::
ceph mds deactivate <who>
Subcommand ``fail`` forces mds to status fail.
Usage::
ceph mds fail <who>
Subcommand ``rm`` removes inactive mds.
Usage::
ceph mds rm <int[0-]> <name> (type.id)>
Subcommand ``rmfailed`` removes failed mds.
Usage::
ceph mds rmfailed <int[0-]>
Subcommand ``set_state`` sets mds state of <gid> to <numeric-state>.
Usage::
ceph mds set_state <int[0-]> <int[0-20]>
Subcommand ``stat`` shows MDS status.
Usage::
ceph mds stat
Subcommand ``tell`` sends command to particular mds.
Usage::
ceph mds tell <who> <args> [<args>...]
mon
---
Manage monitor configuration and administration. It uses some additional
subcommands.
Subcommand ``add`` adds new monitor named <name> at <addr>.
Usage::
ceph mon add <name> <IPaddr[:port]>
Subcommand ``dump`` dumps formatted monmap (optionally from epoch)
Usage::
ceph mon dump {<int[0-]>}
Subcommand ``getmap`` gets monmap.
Usage::
ceph mon getmap {<int[0-]>}
Subcommand ``remove`` removes monitor named <name>.
Usage::
ceph mon remove <name>
Subcommand ``stat`` summarizes monitor status.
Usage::
ceph mon stat
mon_status
----------
Reports status of monitors.
Usage::
ceph mon_status
osd
---
Manage OSD configuration and administration. It uses some additional
subcommands.
Subcommand ``blacklist`` manage blacklisted clients. It uses some additional
subcommands.
Subcommand ``add`` add <addr> to blacklist (optionally until <expire> seconds
from now)
Usage::
ceph osd blacklist add <EntityAddr> {<float[0.0-]>}
Subcommand ``ls`` show blacklisted clients
Usage::
ceph osd blacklist ls
Subcommand ``rm`` remove <addr> from blacklist
Usage::
ceph osd blacklist rm <EntityAddr>
Subcommand ``blocked-by`` prints a histogram of which OSDs are blocking their peers
Usage::
ceph osd blocked-by
Subcommand ``create`` creates new osd (with optional UUID and ID).
This command is DEPRECATED as of the Luminous release, and will be removed in
a future release.
Subcommand ``new`` should instead be used.
Usage::
ceph osd create {<uuid>} {<id>}
Subcommand ``new`` reuses a previously destroyed OSD *id*. The new OSD will
have the specified *uuid*, and the command expects a JSON file containing
the base64 cephx key for auth entity *client.osd.<id>*, as well as optional
base64 cepx key for dm-crypt lockbox access and a dm-crypt key. Specifying
a dm-crypt requires specifying the accompanying lockbox cephx key.
Usage::
ceph osd new {<id>} {<uuid>} -i {<secrets.json>}
The secrets JSON file is expected to maintain a form of the following format::
{
"cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg=="
}
Or::
{
"cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg==",
"cephx_lockbox_secret": "AQDNCglZuaeVCRAAYr76PzR1Anh7A0jswkODIQ==",
"dmcrypt_key": "<dm-crypt key>"
}
Subcommand ``crush`` is used for CRUSH management. It uses some additional
subcommands.
Subcommand ``add`` adds or updates crushmap position and weight for <name> with
<weight> and location <args>.
Usage::
ceph osd crush add <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
Subcommand ``add-bucket`` adds no-parent (probably root) crush bucket <name> of
type <type>.
Usage::
ceph osd crush add-bucket <name> <type>
Subcommand ``create-or-move`` creates entry or moves existing entry for <name>
<weight> at/to location <args>.
Usage::
ceph osd crush create-or-move <osdname (id|osd.id)> <float[0.0-]> <args>
[<args>...]
Subcommand ``dump`` dumps crush map.
Usage::
ceph osd crush dump
Subcommand ``get-tunable`` get crush tunable straw_calc_version
Usage::
ceph osd crush get-tunable straw_calc_version
Subcommand ``link`` links existing entry for <name> under location <args>.
Usage::
ceph osd crush link <name> <args> [<args>...]
Subcommand ``move`` moves existing entry for <name> to location <args>.
Usage::
ceph osd crush move <name> <args> [<args>...]
Subcommand ``remove`` removes <name> from crush map (everywhere, or just at
<ancestor>).
Usage::
ceph osd crush remove <name> {<ancestor>}
Subcommand ``rename-bucket`` renames buchket <srcname> to <stname>
Usage::
ceph osd crush rename-bucket <srcname> <dstname>
Subcommand ``reweight`` change <name>'s weight to <weight> in crush map.
Usage::
ceph osd crush reweight <name> <float[0.0-]>
Subcommand ``reweight-all`` recalculate the weights for the tree to
ensure they sum correctly
Usage::
ceph osd crush reweight-all
Subcommand ``reweight-subtree`` changes all leaf items beneath <name>
to <weight> in crush map
Usage::
ceph osd crush reweight-subtree <name> <weight>
Subcommand ``rm`` removes <name> from crush map (everywhere, or just at
<ancestor>).
Usage::
ceph osd crush rm <name> {<ancestor>}
Subcommand ``rule`` is used for creating crush rules. It uses some additional
subcommands.
Subcommand ``create-erasure`` creates crush rule <name> for erasure coded pool
created with <profile> (default default).
Usage::
ceph osd crush rule create-erasure <name> {<profile>}
Subcommand ``create-simple`` creates crush rule <name> to start from <root>,
replicate across buckets of type <type>, using a choose mode of <firstn|indep>
(default firstn; indep best for erasure pools).
Usage::
ceph osd crush rule create-simple <name> <root> <type> {firstn|indep}
Subcommand ``dump`` dumps crush rule <name> (default all).
Usage::
ceph osd crush rule dump {<name>}
Subcommand ``ls`` lists crush rules.
Usage::
ceph osd crush rule ls
Subcommand ``rm`` removes crush rule <name>.
Usage::
ceph osd crush rule rm <name>
Subcommand ``set`` used alone, sets crush map from input file.
Usage::
ceph osd crush set
Subcommand ``set`` with osdname/osd.id update crushmap position and weight
for <name> to <weight> with location <args>.
Usage::
ceph osd crush set <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]
Subcommand ``set-tunable`` set crush tunable <tunable> to <value>. The only
tunable that can be set is straw_calc_version.
Usage::
ceph osd crush set-tunable straw_calc_version <value>
Subcommand ``show-tunables`` shows current crush tunables.
Usage::
ceph osd crush show-tunables
Subcommand ``tree`` shows the crush buckets and items in a tree view.
Usage::
ceph osd crush tree
Subcommand ``tunables`` sets crush tunables values to <profile>.
Usage::
ceph osd crush tunables legacy|argonaut|bobtail|firefly|hammer|optimal|default
Subcommand ``unlink`` unlinks <name> from crush map (everywhere, or just at
<ancestor>).
Usage::
ceph osd crush unlink <name> {<ancestor>}
Subcommand ``df`` shows OSD utilization
Usage::
ceph osd df {plain|tree}
Subcommand ``deep-scrub`` initiates deep scrub on specified osd.
Usage::
ceph osd deep-scrub <who>
Subcommand ``down`` sets osd(s) <id> [<id>...] down.
Usage::
ceph osd down <ids> [<ids>...]
Subcommand ``dump`` prints summary of OSD map.
Usage::
ceph osd dump {<int[0-]>}
Subcommand ``erasure-code-profile`` is used for managing the erasure code
profiles. It uses some additional subcommands.
Subcommand ``get`` gets erasure code profile <name>.
Usage::
ceph osd erasure-code-profile get <name>
Subcommand ``ls`` lists all erasure code profiles.
Usage::
ceph osd erasure-code-profile ls
Subcommand ``rm`` removes erasure code profile <name>.
Usage::
ceph osd erasure-code-profile rm <name>
Subcommand ``set`` creates erasure code profile <name> with [<key[=value]> ...]
pairs. Add a --force at the end to override an existing profile (IT IS RISKY).
Usage::
ceph osd erasure-code-profile set <name> {<profile> [<profile>...]}
Subcommand ``find`` find osd <id> in the CRUSH map and shows its location.
Usage::
ceph osd find <int[0-]>
Subcommand ``getcrushmap`` gets CRUSH map.
Usage::
ceph osd getcrushmap {<int[0-]>}
Subcommand ``getmap`` gets OSD map.
Usage::
ceph osd getmap {<int[0-]>}
Subcommand ``getmaxosd`` shows largest OSD id.
Usage::
ceph osd getmaxosd
Subcommand ``in`` sets osd(s) <id> [<id>...] in.
Usage::
ceph osd in <ids> [<ids>...]
Subcommand ``lost`` marks osd as permanently lost. THIS DESTROYS DATA IF NO
MORE REPLICAS EXIST, BE CAREFUL.
Usage::
ceph osd lost <int[0-]> {--yes-i-really-mean-it}
Subcommand ``ls`` shows all OSD ids.
Usage::
ceph osd ls {<int[0-]>}
Subcommand ``lspools`` lists pools.
Usage::
ceph osd lspools {<int>}
Subcommand ``map`` finds pg for <object> in <pool>.
Usage::
ceph osd map <poolname> <objectname>
Subcommand ``metadata`` fetches metadata for osd <id>.
Usage::
ceph osd metadata {int[0-]} (default all)
Subcommand ``out`` sets osd(s) <id> [<id>...] out.
Usage::
ceph osd out <ids> [<ids>...]
Subcommand ``pause`` pauses osd.
Usage::
ceph osd pause
Subcommand ``perf`` prints dump of OSD perf summary stats.
Usage::
ceph osd perf
Subcommand ``pg-temp`` set pg_temp mapping pgid:[<id> [<id>...]] (developers
only).
Usage::
ceph osd pg-temp <pgid> {<id> [<id>...]}
Subcommand ``force-create-pg`` forces creation of pg <pgid>.
Usage::
ceph osd force-create-pg <pgid>
Subcommand ``pool`` is used for managing data pools. It uses some additional
subcommands.
Subcommand ``create`` creates pool.
Usage::
ceph osd pool create <poolname> <int[0-]> {<int[0-]>} {replicated|erasure}
{<erasure_code_profile>} {<ruleset>} {<int>}
Subcommand ``delete`` deletes pool.
Usage::
ceph osd pool delete <poolname> {<poolname>} {--yes-i-really-really-mean-it}
Subcommand ``get`` gets pool parameter <var>.
Usage::
ceph osd pool get <poolname> size|min_size|crash_replay_interval|pg_num|
pgp_num|crush_ruleset|auid|write_fadvise_dontneed
Only for tiered pools::
ceph osd pool get <poolname> hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|
target_max_objects|target_max_bytes|cache_target_dirty_ratio|cache_target_dirty_high_ratio|
cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|
min_read_recency_for_promote|hit_set_grade_decay_rate|hit_set_search_last_n
Only for erasure coded pools::
ceph osd pool get <poolname> erasure_code_profile
Use ``all`` to get all pool parameters that apply to the pool's type::
ceph osd pool get <poolname> all
Subcommand ``get-quota`` obtains object or byte limits for pool.
Usage::
ceph osd pool get-quota <poolname>
Subcommand ``ls`` list pools
Usage::
ceph osd pool ls {detail}
Subcommand ``mksnap`` makes snapshot <snap> in <pool>.
Usage::
ceph osd pool mksnap <poolname> <snap>
Subcommand ``rename`` renames <srcpool> to <destpool>.
Usage::
ceph osd pool rename <poolname> <poolname>
Subcommand ``rmsnap`` removes snapshot <snap> from <pool>.
Usage::
ceph osd pool rmsnap <poolname> <snap>
Subcommand ``set`` sets pool parameter <var> to <val>.
Usage::
ceph osd pool set <poolname> size|min_size|crash_replay_interval|pg_num|
pgp_num|crush_ruleset|hashpspool|nodelete|nopgchange|nosizechange|
hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|debug_fake_ec_pool|
target_max_bytes|target_max_objects|cache_target_dirty_ratio|
cache_target_dirty_high_ratio|
cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|auid|
min_read_recency_for_promote|write_fadvise_dontneed|hit_set_grade_decay_rate|
hit_set_search_last_n
<val> {--yes-i-really-mean-it}
Subcommand ``set-quota`` sets object or byte limit on pool.
Usage::
ceph osd pool set-quota <poolname> max_objects|max_bytes <val>
Subcommand ``stats`` obtain stats from all pools, or from specified pool.
Usage::
ceph osd pool stats {<name>}
Subcommand ``primary-affinity`` adjust osd primary-affinity from 0.0 <=<weight>
<= 1.0
Usage::
ceph osd primary-affinity <osdname (id|osd.id)> <float[0.0-1.0]>
Subcommand ``primary-temp`` sets primary_temp mapping pgid:<id>|-1 (developers
only).
Usage::
ceph osd primary-temp <pgid> <id>
Subcommand ``repair`` initiates repair on a specified osd.
Usage::
ceph osd repair <who>
Subcommand ``reweight`` reweights osd to 0.0 < <weight> < 1.0.
Usage::
osd reweight <int[0-]> <float[0.0-1.0]>
Subcommand ``reweight-by-pg`` reweight OSDs by PG distribution
[overload-percentage-for-consideration, default 120].
Usage::
ceph osd reweight-by-pg {<int[100-]>} {<poolname> [<poolname...]}
{--no-increasing}
Subcommand ``reweight-by-utilization`` reweight OSDs by utilization
[overload-percentage-for-consideration, default 120].
Usage::
ceph osd reweight-by-utilization {<int[100-]>}
{--no-increasing}
Subcommand ``rm`` removes osd(s) <id> [<id>...] in the cluster.
Usage::
ceph osd rm <ids> [<ids>...]
Subcommand ``destroy`` marks OSD *id* as *destroyed*, removing its cephx
entity's keys and all of its dm-crypt and daemon-private config key
entries.
This command will not remove the OSD from crush, nor will it remove the
OSD from the OSD map. Instead, once the command successfully completes,
the OSD will show marked as *destroyed*.
In order to mark an OSD as destroyed, the OSD must first be marked as
**lost**.
Usage::
ceph osd destroy <id> {--yes-i-really-mean-it}
Subcommand ``purge`` performs a combination of ``osd destroy``,
``osd rm`` and ``osd crush remove``.
Usage::
ceph osd purge <id> {--yes-i-really-mean-it}
Subcommand ``scrub`` initiates scrub on specified osd.
Usage::
ceph osd scrub <who>
Subcommand ``set`` sets <key>.
Usage::
ceph osd set full|pause|noup|nodown|noout|noin|nobackfill|
norebalance|norecover|noscrub|nodeep-scrub|notieragent
Subcommand ``setcrushmap`` sets crush map from input file.
Usage::
ceph osd setcrushmap
Subcommand ``setmaxosd`` sets new maximum osd value.
Usage::
ceph osd setmaxosd <int[0-]>
Subcommand ``stat`` prints summary of OSD map.
Usage::
ceph osd stat
Subcommand ``tier`` is used for managing tiers. It uses some additional
subcommands.
Subcommand ``add`` adds the tier <tierpool> (the second one) to base pool <pool>
(the first one).
Usage::
ceph osd tier add <poolname> <poolname> {--force-nonempty}
Subcommand ``add-cache`` adds a cache <tierpool> (the second one) of size <size>
to existing pool <pool> (the first one).
Usage::
ceph osd tier add-cache <poolname> <poolname> <int[0-]>
Subcommand ``cache-mode`` specifies the caching mode for cache tier <pool>.
Usage::
ceph osd tier cache-mode <poolname> none|writeback|forward|readonly|
readforward|readproxy
Subcommand ``remove`` removes the tier <tierpool> (the second one) from base pool
<pool> (the first one).
Usage::
ceph osd tier remove <poolname> <poolname>
Subcommand ``remove-overlay`` removes the overlay pool for base pool <pool>.
Usage::
ceph osd tier remove-overlay <poolname>
Subcommand ``set-overlay`` set the overlay pool for base pool <pool> to be
<overlaypool>.
Usage::
ceph osd tier set-overlay <poolname> <poolname>
Subcommand ``tree`` prints OSD tree.
Usage::
ceph osd tree {<int[0-]>}
Subcommand ``unpause`` unpauses osd.
Usage::
ceph osd unpause
Subcommand ``unset`` unsets <key>.
Usage::
ceph osd unset full|pause|noup|nodown|noout|noin|nobackfill|
norebalance|norecover|noscrub|nodeep-scrub|notieragent
pg
--
It is used for managing the placement groups in OSDs. It uses some
additional subcommands.
Subcommand ``debug`` shows debug info about pgs.
Usage::
ceph pg debug unfound_objects_exist|degraded_pgs_exist
Subcommand ``deep-scrub`` starts deep-scrub on <pgid>.
Usage::
ceph pg deep-scrub <pgid>
Subcommand ``dump`` shows human-readable versions of pg map (only 'all' valid
with plain).
Usage::
ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}
Subcommand ``dump_json`` shows human-readable version of pg map in json only.
Usage::
ceph pg dump_json {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}
Subcommand ``dump_pools_json`` shows pg pools info in json only.
Usage::
ceph pg dump_pools_json
Subcommand ``dump_stuck`` shows information about stuck pgs.
Usage::
ceph pg dump_stuck {inactive|unclean|stale|undersized|degraded [inactive|unclean|stale|undersized|degraded...]}
{<int>}
Subcommand ``getmap`` gets binary pg map to -o/stdout.
Usage::
ceph pg getmap
Subcommand ``ls`` lists pg with specific pool, osd, state
Usage::
ceph pg ls {<int>} {active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale| remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized [active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale|remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized...]}
Subcommand ``ls-by-osd`` lists pg on osd [osd]
Usage::
ceph pg ls-by-osd <osdname (id|osd.id)> {<int>}
{active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale| remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized [active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale|remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized...]}
Subcommand ``ls-by-pool`` lists pg with pool = [poolname]
Usage::
ceph pg ls-by-pool <poolstr> {<int>} {active|
clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale| remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized [active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale|remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized...]}
Subcommand ``ls-by-primary`` lists pg with primary = [osd]
Usage::
ceph pg ls-by-primary <osdname (id|osd.id)> {<int>}
{active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale| remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized [active|clean|down|replay|splitting|
scrubbing|scrubq|degraded|inconsistent|peering|repair|
recovery|backfill_wait|incomplete|stale|remapped|
deep_scrub|backfill|backfill_toofull|recovery_wait|
undersized...]}
Subcommand ``map`` shows mapping of pg to osds.
Usage::
ceph pg map <pgid>
Subcommand ``repair`` starts repair on <pgid>.
Usage::
ceph pg repair <pgid>
Subcommand ``scrub`` starts scrub on <pgid>.
Usage::
ceph pg scrub <pgid>
Subcommand ``set_full_ratio`` sets ratio at which pgs are considered full.
Usage::
ceph pg set_full_ratio <float[0.0-1.0]>
Subcommand ``set_backfillfull_ratio`` sets ratio at which pgs are considered too full to backfill.
Usage::
ceph pg set_backfillfull_ratio <float[0.0-1.0]>
Subcommand ``set_nearfull_ratio`` sets ratio at which pgs are considered nearly
full.
Usage::
ceph pg set_nearfull_ratio <float[0.0-1.0]>
Subcommand ``stat`` shows placement group status.
Usage::
ceph pg stat
quorum
------
Cause MON to enter or exit quorum.
Usage::
ceph quorum enter|exit
Note: this only works on the MON to which the ``ceph`` command is connected.
If you want a specific MON to enter or exit quorum, use this syntax::
ceph tell mon.<id> quorum enter|exit
quorum_status
-------------
Reports status of monitor quorum.
Usage::
ceph quorum_status
report
------
Reports full status of cluster, optional title tag strings.
Usage::
ceph report {<tags> [<tags>...]}
scrub
-----
Scrubs the monitor stores.
Usage::
ceph scrub
status
------
Shows cluster status.
Usage::
ceph status
sync force
----------
Forces sync of and clear monitor store.
Usage::
ceph sync force {--yes-i-really-mean-it} {--i-know-what-i-am-doing}
tell
----
Sends a command to a specific daemon.
Usage::
ceph tell <name (type.id)> <args> [<args>...]
List all available commands.
Usage::
ceph tell <name (type.id)> help
version
-------
Show mon daemon version
Usage::
ceph version
Options
=======
.. option:: -i infile
will specify an input file to be passed along as a payload with the
command to the monitor cluster. This is only used for specific
monitor commands.
.. option:: -o outfile
will write any payload returned by the monitor cluster with its
reply to outfile. Only specific monitor commands (e.g. osd getmap)
return a payload.
.. option:: -c ceph.conf, --conf=ceph.conf
Use ceph.conf configuration file instead of the default
``/etc/ceph/ceph.conf`` to determine monitor addresses during startup.
.. option:: --id CLIENT_ID, --user CLIENT_ID
Client id for authentication.
.. option:: --name CLIENT_NAME, -n CLIENT_NAME
Client name for authentication.
.. option:: --cluster CLUSTER
Name of the Ceph cluster.
.. option:: --admin-daemon ADMIN_SOCKET, daemon DAEMON_NAME
Submit admin-socket commands via admin sockets in /var/run/ceph.
.. option:: --admin-socket ADMIN_SOCKET_NOPE
You probably mean --admin-daemon
.. option:: -s, --status
Show cluster status.
.. option:: -w, --watch
Watch live cluster changes.
.. option:: --watch-debug
Watch debug events.
.. option:: --watch-info
Watch info events.
.. option:: --watch-sec
Watch security events.
.. option:: --watch-warn
Watch warning events.
.. option:: --watch-error
Watch error events.
.. option:: --version, -v
Display version.
.. option:: --verbose
Make verbose.
.. option:: --concise
Make less verbose.
.. option:: -f {json,json-pretty,xml,xml-pretty,plain}, --format
Format of output.
.. option:: --connect-timeout CLUSTER_TIMEOUT
Set a timeout for connecting to the cluster.
.. option:: --no-increasing
``--no-increasing`` is off by default. So increasing the osd weight is allowed
using the ``reweight-by-utilization`` or ``test-reweight-by-utilization`` commands.
If this option is used with these commands, it will help not to increase osd weight
even the osd is under utilized.
Availability
============
:program:`ceph` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to
the Ceph documentation at http://ceph.com/docs for more information.
See also
========
:doc:`ceph-mon <ceph-mon>`\(8),
:doc:`ceph-osd <ceph-osd>`\(8),
:doc:`ceph-mds <ceph-mds>`\(8)