ceph/doc/radosgw/troubleshooting.rst

=================
 Troubleshooting
=================


The Gateway Won't Start
=======================

If you cannot start the gateway (i.e., there is no existing ``pid``), 
check to see if there is an existing ``.asok`` file from another 
user. If an ``.asok`` file from another user exists and there is no
running ``pid``, remove the ``.asok`` file and try to start the
process again.

This may occur when you start the process as a ``root`` user and 
the startup script is trying to start the process as a 
``www-data`` or ``apache`` user and an existing ``.asok`` is 
preventing the script from starting the daemon.

The radosgw init script (/etc/init.d/radosgw) also has a verbose argument that
can provide some insight as to what could be the issue:

  /etc/init.d/radosgw start -v

or

  /etc/init.d radosgw start --verbose

HTTP Request Errors
===================

Examining the access and error logs for the web server itself is
probably the first step in identifying what is going on.  If there is
a 500 error, that usually indicates a problem communicating with the
``radosgw`` daemon.  Ensure the daemon is running, its socket path is
configured, and that the web server is looking for it in the proper
location.


Crashed ``radosgw`` process
===========================

If the ``radosgw`` process dies, you will normally see a 500 error
from the web server (apache, nginx, etc.).  In that situation, simply
restarting radosgw will restore service.

To diagnose the cause of the crash, check the log in ``/var/log/ceph``
and/or the core file (if one was generated).


Blocked ``radosgw`` Requests
============================

If some (or all) radosgw requests appear to be blocked, you can get
some insight into the internal state of the ``radosgw`` daemon via
its admin socket.  By default, there will be a socket configured to
reside in ``/var/run/ceph``, and the daemon can be queried with::

 ceph daemon /var/run/ceph/client.rgw help
 
 help                list available commands
 objecter_requests   show in-progress osd requests
 perfcounters_dump   dump perfcounters value
 perfcounters_schema dump perfcounters schema
 version             get protocol version

Of particular interest::

 ceph daemon /var/run/ceph/client.rgw objecter_requests
 ...

will dump information about current in-progress requests with the
RADOS cluster.  This allows one to identify if any requests are blocked
by a non-responsive OSD.  For example, one might see::

  { "ops": [
        { "tid": 1858,
          "pg": "2.d2041a48",
          "osd": 1,
          "last_sent": "2012-03-08 14:56:37.949872",
          "attempts": 1,
          "object_id": "fatty_25647_object1857",
          "object_locator": "@2",
          "snapid": "head",
          "snap_context": "0=[]",
          "mtime": "2012-03-08 14:56:37.949813",
          "osd_ops": [
                "write 0~4096"]},
        { "tid": 1873,
          "pg": "2.695e9f8e",
          "osd": 1,
          "last_sent": "2012-03-08 14:56:37.970615",
          "attempts": 1,
          "object_id": "fatty_25647_object1872",
          "object_locator": "@2",
          "snapid": "head",
          "snap_context": "0=[]",
          "mtime": "2012-03-08 14:56:37.970555",
          "osd_ops": [
                "write 0~4096"]}],
  "linger_ops": [],
  "pool_ops": [],
  "pool_stat_ops": [],
  "statfs_ops": []}

In this dump, two requests are in progress.  The ``last_sent`` field is
the time the RADOS request was sent.  If this is a while ago, it suggests
that the OSD is not responding.  For example, for request 1858, you could
check the OSD status with::

 ceph pg map 2.d2041a48
 
 osdmap e9 pg 2.d2041a48 (2.0) -> up [1,0] acting [1,0]

This tells us to look at ``osd.1``, the primary copy for this PG::

 ceph daemon osd.1 ops
 { "num_ops": 651,
  "ops": [
        { "description": "osd_op(client.4124.0:1858 fatty_25647_object1857 [write 0~4096] 2.d2041a48)",
          "received_at": "1331247573.344650",
          "age": "25.606449",
          "flag_point": "waiting for sub ops",
          "client_info": { "client": "client.4124",
              "tid": 1858}},
 ...

The ``flag_point`` field indicates that the OSD is currently waiting
for replicas to respond, in this case ``osd.0``.


Java S3 API Troubleshooting
===========================


Peer Not Authenticated
----------------------

You may receive an error that looks like this:: 

     [java] INFO: Unable to execute HTTP request: peer not authenticated

The Java SDK for S3 requires a valid certificate from a recognized certificate
authority, because it uses HTTPS by default. If you are just testing the Ceph
Object Storage services, you can resolve this problem in a few ways:  

#. Prepend the IP address or hostname with ``http://``. For example, change this::

	conn.setEndpoint("myserver");

   To:: 

	conn.setEndpoint("http://myserver")

#. After setting your credentials, add a client configuration and set the 
   protocol to ``Protocol.HTTP``. :: 

			AWSCredentials credentials = new BasicAWSCredentials(accessKey, secretKey);
			
			ClientConfiguration clientConfig = new ClientConfiguration();
			clientConfig.setProtocol(Protocol.HTTP);
			
			AmazonS3 conn = new AmazonS3Client(credentials, clientConfig);



405 MethodNotAllowed
--------------------

If you receive an 405 error, check to see if you have the S3 subdomain set up correctly. 
You will need to have a wild card setting in your DNS record for subdomain functionality
to work properly.

Also, check to ensure that the default site is disabled. ::

     [java] Exception in thread "main" Status Code: 405, AWS Service: Amazon S3, AWS Request ID: null, AWS Error Code: MethodNotAllowed, AWS Error Message: null, S3 Extended Request ID: null