ceph/tasks/thrashosds.py
Sage Weil 7e41c93ed8 tasks/thrashosds: support overrides
e.g.,

overrides:
  thrashosds:
    thrash_primary_affinity: false
...
tasks:
- install:
- ceph:
- thrashosds:
- workunit:
...

Needed for #9865

Signed-off-by: Sage Weil <sage@redhat.com>
2014-10-22 11:19:01 -07:00

176 lines
6.7 KiB
Python

"""
Thrash -- Simulate random osd failures.
"""
import contextlib
import logging
import ceph_manager
from teuthology import misc as teuthology
log = logging.getLogger(__name__)
@contextlib.contextmanager
def task(ctx, config):
"""
"Thrash" the OSDs by randomly marking them out/down (and then back
in) until the task is ended. This loops, and every op_delay
seconds it randomly chooses to add or remove an OSD (even odds)
unless there are fewer than min_out OSDs out of the cluster, or
more than min_in OSDs in the cluster.
All commands are run on mon0 and it stops when __exit__ is called.
The config is optional, and is a dict containing some or all of:
min_in: (default 3) the minimum number of OSDs to keep in the
cluster
min_out: (default 0) the minimum number of OSDs to keep out of the
cluster
op_delay: (5) the length of time to sleep between changing an
OSD's status
min_dead: (0) minimum number of osds to leave down/dead.
max_dead: (0) maximum number of osds to leave down/dead before waiting
for clean. This should probably be num_replicas - 1.
clean_interval: (60) the approximate length of time to loop before
waiting until the cluster goes clean. (In reality this is used
to probabilistically choose when to wait, and the method used
makes it closer to -- but not identical to -- the half-life.)
scrub_interval: (-1) the approximate length of time to loop before
waiting until a scrub is performed while cleaning. (In reality
this is used to probabilistically choose when to wait, and it
only applies to the cases where cleaning is being performed).
-1 is used to indicate that no scrubbing will be done.
chance_down: (0.4) the probability that the thrasher will mark an
OSD down rather than marking it out. (The thrasher will not
consider that OSD out of the cluster, since presently an OSD
wrongly marked down will mark itself back up again.) This value
can be either an integer (eg, 75) or a float probability (eg
0.75).
chance_test_min_size: (0) chance to run test_pool_min_size,
which:
- kills all but one osd
- waits
- kills that osd
- revives all other osds
- verifies that the osds fully recover
timeout: (360) the number of seconds to wait for the cluster
to become clean after each cluster change. If this doesn't
happen within the timeout, an exception will be raised.
revive_timeout: (150) number of seconds to wait for an osd asok to
appear after attempting to revive the osd
thrash_primary_affinity: (true) randomly adjust primary-affinity
chance_pgnum_grow: (0) chance to increase a pool's size
chance_pgpnum_fix: (0) chance to adjust pgpnum to pg for a pool
pool_grow_by: (10) amount to increase pgnum by
max_pgs_per_pool_osd: (1200) don't expand pools past this size per osd
pause_short: (3) duration of short pause
pause_long: (80) duration of long pause
pause_check_after: (50) assert osd down after this long
chance_inject_pause_short: (1) chance of injecting short stall
chance_inject_pause_long: (0) chance of injecting long stall
clean_wait: (0) duration to wait before resuming thrashing once clean
powercycle: (false) whether to power cycle the node instead
of just the osd process. Note that this assumes that a single
osd is the only important process on the node.
chance_test_backfill_full: (0) chance to simulate full disks stopping
backfill
chance_test_map_discontinuity: (0) chance to test map discontinuity
map_discontinuity_sleep_time: (40) time to wait for map trims
ceph_objectstore_tool: (true) whether to export/import a pg while an osd is down
chance_move_pg: (1.0) chance of moving a pg if more than 1 osd is down (default 100%)
example:
tasks:
- ceph:
- thrashosds:
chance_down: 10
op_delay: 3
min_in: 1
timeout: 600
- interactive:
"""
if config is None:
config = {}
assert isinstance(config, dict), \
'thrashosds task only accepts a dict for configuration'
overrides = ctx.config.get('overrides', {})
teuthology.deep_merge(config, overrides.get('thrashosds', {}))
if 'powercycle' in config:
# sync everyone first to avoid collateral damage to / etc.
log.info('Doing preliminary sync to avoid collateral damage...')
ctx.cluster.run(args=['sync'])
if 'ipmi_user' in ctx.teuthology_config:
for t, key in ctx.config['targets'].iteritems():
host = t.split('@')[-1]
shortname = host.split('.')[0]
from teuthology.orchestra import remote as oremote
console = oremote.getRemoteConsole(
name=host,
ipmiuser=ctx.teuthology_config['ipmi_user'],
ipmipass=ctx.teuthology_config['ipmi_password'],
ipmidomain=ctx.teuthology_config['ipmi_domain'])
cname = '{host}.{domain}'.format(
host=shortname,
domain=ctx.teuthology_config['ipmi_domain'])
log.debug('checking console status of %s' % cname)
if not console.check_status():
log.info(
'Failed to get console status for '
'%s, disabling console...'
% cname)
console=None
else:
# find the remote for this console and add it
remotes = [
r for r in ctx.cluster.remotes.keys() if r.name == t]
if len(remotes) != 1:
raise Exception(
'Too many (or too few) remotes '
'found for target {t}'.format(t=t))
remotes[0].console = console
log.debug('console ready on %s' % cname)
# check that all osd remotes have a valid console
osds = ctx.cluster.only(teuthology.is_type('osd'))
for remote, _ in osds.remotes.iteritems():
if not remote.console:
raise Exception(
'IPMI console required for powercycling, '
'but not available on osd role: {r}'.format(
r=remote.name))
log.info('Beginning thrashosds...')
thrash_proc = ceph_manager.Thrasher(
ctx.manager,
config,
logger=log.getChild('thrasher')
)
try:
yield
finally:
log.info('joining thrashosds')
thrash_proc.do_join()
ctx.manager.wait_for_recovery(config.get('timeout', 360))