ceph/tasks/osd_failsafe_enospc.py

"""
Handle osdfailsafe configuration settings (nearfull ratio and full ratio)
"""
from cStringIO import StringIO
import logging
import time

import ceph_manager
from teuthology.orchestra import run
from util.rados import rados
from teuthology import misc as teuthology

log = logging.getLogger(__name__)

def task(ctx, config):
    """
    Test handling of osd_failsafe_nearfull_ratio and osd_failsafe_full_ratio
    configuration settings

    In order for test to pass must use log-whitelist as follows

        tasks:
            - chef:
            - install:
            - ceph:
                log-whitelist: ['OSD near full', 'OSD full dropping all updates']
            - osd_failsafe_enospc:

    """
    if config is None:
        config = {}
    assert isinstance(config, dict), \
        'osd_failsafe_enospc task only accepts a dict for configuration'

    # Give 2 seconds for injectargs + osd_op_complaint_time (30) + 2 * osd_heartbeat_interval (6) + 6 padding
    sleep_time = 50

    # something that is always there
    dummyfile = '/etc/fstab'
    dummyfile2 = '/etc/resolv.conf'

    # create 1 pg pool with 1 rep which can only be on osd.0
    osds = ctx.manager.get_osd_dump()
    for osd in osds:
        if osd['osd'] != 0:
            ctx.manager.mark_out_osd(osd['osd'])

    log.info('creating pool foo')
    ctx.manager.create_pool("foo")
    ctx.manager.raw_cluster_cmd('osd', 'pool', 'set', 'foo', 'size', '1')

    # State NONE -> NEAR
    log.info('1. Verify warning messages when exceeding nearfull_ratio')

    proc = mon.run(
             args=[
                'daemon-helper',
                'kill',
                'ceph', '-w'
             ],
             stdin=run.PIPE,
             stdout=StringIO(),
             wait=False,
        )

    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_nearfull_ratio .00001')

    time.sleep(sleep_time)
    proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w
    proc.wait()

    lines = proc.stdout.getvalue().split('\n')

    count = len(filter(lambda line: '[WRN] OSD near full' in line, lines))
    assert count == 2, 'Incorrect number of warning messages expected 2 got %d' % count
    count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines))
    assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count

    # State NEAR -> FULL
    log.info('2. Verify error messages when exceeding full_ratio')

    proc = mon.run(
             args=[
                'daemon-helper',
                'kill',
                'ceph', '-w'
             ],
             stdin=run.PIPE,
             stdout=StringIO(),
             wait=False,
        )

    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .00001')

    time.sleep(sleep_time)
    proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w
    proc.wait()

    lines = proc.stdout.getvalue().split('\n')

    count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines))
    assert count == 2, 'Incorrect number of error messages expected 2 got %d' % count

    log.info('3. Verify write failure when exceeding full_ratio')

    # Write data should fail
    ret = rados(ctx, mon, ['-p', 'foo', 'put', 'newfile1', dummyfile])
    assert ret != 0, 'Expected write failure but it succeeded with exit status 0'

    # Put back default
    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .97')
    time.sleep(10)

    # State FULL -> NEAR
    log.info('4. Verify write success when NOT exceeding full_ratio')

    # Write should succeed
    ret = rados(ctx, mon, ['-p', 'foo', 'put', 'newfile2', dummyfile2])
    assert ret == 0, 'Expected write to succeed, but got exit status %d' % ret

    log.info('5. Verify warning messages again when exceeding nearfull_ratio')

    proc = mon.run(
             args=[
                'daemon-helper',
                'kill',
                'ceph', '-w'
             ],
             stdin=run.PIPE,
             stdout=StringIO(),
             wait=False,
        )

    time.sleep(sleep_time)
    proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w
    proc.wait()

    lines = proc.stdout.getvalue().split('\n')

    count = len(filter(lambda line: '[WRN] OSD near full' in line, lines))
    assert count == 1 or count == 2, 'Incorrect number of warning messages expected 1 or 2 got %d' % count
    count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines))
    assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count

    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_nearfull_ratio .90')
    time.sleep(10)

    # State NONE -> FULL
    log.info('6. Verify error messages again when exceeding full_ratio')

    proc = mon.run(
             args=[
                'daemon-helper',
                'kill',
                'ceph', '-w'
             ],
             stdin=run.PIPE,
             stdout=StringIO(),
             wait=False,
        )

    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .00001')

    time.sleep(sleep_time)
    proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w
    proc.wait()

    lines = proc.stdout.getvalue().split('\n')

    count = len(filter(lambda line: '[WRN] OSD near full' in line, lines))
    assert count == 0, 'Incorrect number of warning messages expected 0 got %d' % count
    count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines))
    assert count == 2, 'Incorrect number of error messages expected 2 got %d' % count

    # State FULL -> NONE
    log.info('7. Verify no messages settings back to default')

    ctx.manager.raw_cluster_cmd('tell', 'osd.0', 'injectargs', '--osd_failsafe_full_ratio .97')
    time.sleep(10)

    proc = mon.run(
             args=[
                'daemon-helper',
                'kill',
                'ceph', '-w'
             ],
             stdin=run.PIPE,
             stdout=StringIO(),
             wait=False,
        )

    time.sleep(sleep_time)
    proc.stdin.close() # causes daemon-helper send SIGKILL to ceph -w
    proc.wait()

    lines = proc.stdout.getvalue().split('\n')

    count = len(filter(lambda line: '[WRN] OSD near full' in line, lines))
    assert count == 0, 'Incorrect number of warning messages expected 0 got %d' % count
    count = len(filter(lambda line: '[ERR] OSD full dropping all updates' in line, lines))
    assert count == 0, 'Incorrect number of error messages expected 0 got %d' % count

    log.info('Test Passed')

    # Bring all OSDs back in
    ctx.manager.remove_pool("foo")
    for osd in osds:
        if osd['osd'] != 0:
            ctx.manager.mark_in_osd(osd['osd'])