ceph/doc/rados/configuration/auth-config-ref.rst

218 lines
6.7 KiB
ReStructuredText

========================
Cephx Config Reference
========================
To protect against man-in-the-middle attacks, Ceph provides its ``cephx``
authentication system to authenticate users and daemons. See `Ceph
Authentication & Authorization`_ for an introduction to ``cephx``
authentication. See the `Cephx Guide`_ for details on enabling/disabling,
creating users and setting user capabilities.
Enable/Disable Authentication
=============================
Depending on the version, Ceph either enables or disables authentication by
default. Use the following settings to expressly enable or disable Ceph.
See `Ceph Authentication`_ for additional details.
.. topic:: Authentication Enablement Defaults
Ceph version 0.54 and earlier versions disable authentication by default.
If you want to use Ceph authentication, you must specifically enable it
for version 0.54 and earlier versions.
Ceph version 0.55 and later version enable authentication by default. If you
do not want to use Ceph authentication, you must specifically disable it
for versions 0.55 and later versions.
.. topic:: Authentication Granularity
Ceph version 0.50 and earlier versions use ``auth supported`` to enable or
disable authentication between the Ceph client and the cluster. Ceph
authentication in earlier versions only authenticates users sending message
traffic between the client and the cluster, so it does not have fine-grained
control.
Ceph version 0.51 and later versions use fine-grained control, which allows
you to require authentication of the client by the cluster
(``auth service required``), authentication of the cluster by the client
(``auth client required``), and authentication of a daemon within the
cluster by another daemon within the cluster (``auth cluster required``).
``auth supported``
.. deprecated:: 0.51
:Description: Indicates whether to use authentication. If not specified,
it defaults to ``none``, which means it is disabled.
:Type: String
:Required: No
:Default: ``none``
``auth cluster required``
.. versionadded:: 0.51
:Description: If enabled, the cluster daemons (i.e., ``ceph-mon``,
``ceph-osd``, and ``ceph-mds``) must authenticate with
each other. Valid setting is ``cephx`` or ``none``.
:Type: String
:Required: No
:Default: Version 0.54 and earlier ``none``. Version 0.55 and later ``cephx``.
``auth service required``
.. versionadded:: 0.51
:Description: If enabled, the cluster daemons require Ceph clients to
authenticate with the cluster in order to access Ceph services.
Valid setting is ``cephx`` or ``none``.
:Type: String
:Required: No
:Default: Version 0.54 and earlier ``none``. Version 0.55 and later ``cephx``.
``auth client required``
.. versionadded:: 0.51
:Description: If enabled, the client requires the Ceph cluster to authenticate
with the client. Valid setting is ``cephx`` or ``none``.
:Type: String
:Required: No
:Default: Version 0.54 and earlier ``none``. Version 0.55 and later ``cephx``.
Keys
====
When you run Ceph with authentication enabled, ``ceph`` administrative commands
and Ceph clients require authentication keys to access the cluster.
The most common way to provide these keys to the ``ceph`` administrative
commands and clients is to include a Ceph keyring under the ``/etc/ceph``
directory. The filename is usually ``ceph.keyring`` (or ``$cluster.keyring``) or
simply ``keyring``. If you include the keyring under the ``/etc/ceph``
directory, you don't need to specify a ``keyring`` entry in your Ceph
configuration file.
We recommend copying the cluster's keyring file to hosts where you'll run
administrative commands, because it contains the ``client.admin`` key. ::
sudo scp {user}@{ceph-cluster-host}:/etc/ceph/ceph.keyring /etc/ceph/ceph.keyring
.. tip:: Ensure the ``ceph.keyring`` file has appropriate permissions set
(e.g., ``chmod 644``) on your client machine.
You may specify the key itself in the Ceph configuration file using the ``key``
setting (not recommended), or a path to a keyfile using the ``keyfile`` setting.
``keyring``
:Description: The path to the keyring file.
:Type: String
:Required: No
:Default: ``/etc/ceph/$cluster.$name.keyring,/etc/ceph/$cluster.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin``
``keyfile``
:Description: The path to a key file (i.e,. a file containing only the key).
:Type: String
:Required: No
:Default: None
``key``
:Description: The key (i.e., the text string of the key itself). Not recommended.
:Type: String
:Required: No
:Default: None
Signatures
==========
In Ceph Bobtail and subsequent versions, we prefer that Ceph authenticate all
ongoing messages between the entities using the session key set up for that
initial authentication. However, Argonaut and earlier Ceph daemons do not know how to perform
ongoing message authentication. To maintain backward compatibility (e.g.,
running both Botbail and Argonaut daemons in the same cluster), message signing
is **off** by default. If you are running Bobtail or later daemons exclusively,
configure Ceph to require signatures.
Like other parts of Ceph authentication, Ceph provides fine-grained control so
you can enable/disable signatures for service messages between the client and
Ceph, and you can enable/disable signatures for messages between Ceph daemons.
``ceph require signatures``
:Description: If set to ``true``, Ceph requires signatures on all message
traffic between the client and the Ceph cluster, and between
daemons within the cluster.
:Type: Boolean
:Required: No
:Default: ``false``
``cepxh cluster require signatures``
:Description: If set to ``true``, Ceph requires signatures on all message
traffic between Ceph daemons within the cluster.
:Type: Boolean
:Required: No
:Default: ``false``
``cepxh service require signatures``
:Description: If set to ``true``, Ceph requires signatures on all message
traffic between Ceph clients and the Ceph cluster.
:Type: Boolean
:Required: No
:Default: ``false``
``cephx sign messages``
:Description: If the Ceph version supports message signing, Ceph will sign
all messages so they cannot be spoofed.
:Type: Boolean
:Default: ``true``
Time to Live
============
``auth service ticket ttl``
:Description: When Ceph sends a client a ticket for authentication, the Ceph
cluster assigns the ticket a time to live.
:Type: Double
:Default: ``60*60``
.. _Ceph Authentication & Authorization: ../../operations/auth-intro
.. _Cephx Guide: ../../operations/authentication
.. _Ceph Authentication: ../../operations/auth-intro#ceph-authentication-cephx