ceph/doc/radosgw/config.rst

592 lines
18 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

=================================
Configuring Ceph Object Gateway
=================================
Configuring a Ceph Object Gateway requires a running Ceph Storage Cluster,
and an Apache web server with the FastCGI module.
The Ceph Object Gateway is a client of the Ceph Storage Cluster. As a
Ceph Storage Cluster client, it requires:
- A name for the gateway instance. We use ``gateway`` in this guide.
- A storage cluster user name with appropriate permissions in a keyring.
- Pools to store its data.
- A data directory for the gateway instance.
- An instance entry in the Ceph Configuration file.
- A configuration file for the web server to interact with FastCGI.
Create a User and Keyring
=========================
Each instance must have a user name and key to communicate with a Ceph Storage
Cluster. In the following steps, we use an admin node to create a keyring.
Then, we create a client user name and key. Next, we add the
key to the Ceph Storage Cluster. Finally, we distribute the key ring to
the node containing the gateway instance.
.. topic:: Monitor Key CAPS
When you provide CAPS to the key, you MUST provide read capability.
However, you have the option of providing write capability for the monitor.
This is an important choice. If you provide write capability to the key,
the Ceph Object Gateway will have the ability to create pools automatically;
however, it will create pools with either the default number of placement
groups (not ideal) or the number of placement groups you specified in your
Ceph configuration file. If you allow the Ceph Object Gateway to create
pools automatically, ensure that you have reasonable defaults for the number
of placement groups first. See `Pool Configuration`_ for details.
See `User Management`_ for additional details on Ceph authentication.
#. Generate a Ceph Object Gateway user name and key for each instance. For
exemplary purposes, we will use the name ``gateway`` after ``client.radosgw``::
sudo ceph auth get-or-create client.radosgw.gateway osd 'allow rwx' mon 'allow rwx' -o /etc/ceph/ceph.client.radosgw.keyring
#. Distribute the keyring to the node with the gateway instance. ::
sudo scp /etc/ceph/ceph.client.radosgw.keyring ceph@{hostname}:/home/ceph
ssh {hostname}
sudo mv ceph.client.radosgw.keyring /etc/ceph/ceph.client.radosgw.keyring
.. note:: The 2nd step is optional if ``admin node`` is the ``gateway host``.
Create Pools
============
Ceph Object Gateways require Ceph Storage Cluster pools to store specific
gateway data. If the user you created has permissions, the gateway
will create the pools automatically. However, you should ensure that you have
set an appropriate default number of placement groups per pool into your Ceph
configuration file.
.. note:: Ceph Object Gateways have multiple pools, so don't make the number of
PGs too high considering all of the pools assigned to the same CRUSH
hierarchy, or performance may suffer.
When configuring a gateway with the default region and zone, the naming
convention for pools typically omits region and zone naming, but you can use any
naming convention you prefer. For example:
- ``.rgw.root``
- ``.rgw.control``
- ``.rgw.gc``
- ``.rgw.buckets``
- ``.rgw.buckets.index``
- ``.rgw.buckets.extra``
- ``.log``
- ``.intent-log``
- ``.usage``
- ``.users``
- ``.users.email``
- ``.users.swift``
- ``.users.uid``
See `Configuration Reference - Pools`_ for details on the default pools for
gateways. See `Pools`_ for details on creating pools. As already said, if
write permission is given, Ceph Object Gateway will create pools automatically.
To create a pool manually, execute the following::
ceph osd pool create {poolname} {pg-num} {pgp-num} {replicated | erasure} [{erasure-code-profile}] {ruleset-name} {ruleset-number}
.. tip:: Ceph supports multiple CRUSH hierarchies and CRUSH rulesets, enabling
great flexibility in the way you configure your gateway. Pools such as
``rgw.buckets.index`` may benefit from a pool of SSDs for fast performance.
Backing storage may benefit from the increased economy of erasure-coded
storage, and/or the improved performance from cache tiering.
When you have completed this step, execute the following to ensure that
you have created all of the foregoing pools::
rados lspools
Add a Gateway Configuration to Ceph
===================================
Add the Ceph Object Gateway configuration to your Ceph Configuration file in
``admin node``. The Ceph Object Gateway configuration requires you to
identify the Ceph Object Gateway instance. Then, you must specify the host name
where you installed the Ceph Object Gateway daemon, a keyring (for use with
cephx), the socket path for FastCGI and a log file.
For distros with Apache 2.2 and early versions of Apache 2.4 (RHEL 6, Ubuntu
12.04, 14.04 etc), append the following configuration to ``/etc/ceph/ceph.conf``
in your ``admin node``::
[client.radosgw.gateway]
host = {hostname}
keyring = /etc/ceph/ceph.client.radosgw.keyring
rgw socket path = ""
log file = /var/log/radosgw/client.radosgw.gateway.log
rgw frontends = fastcgi socket_port=9000 socket_host=0.0.0.0
rgw print continue = false
.. note:: Apache 2.2 and early versions of Apache 2.4 do not use Unix Domain
Sockets but use localhost TCP.
For distros with Apache 2.4.9 or later (RHEL 7, CentOS 7 etc), append the
following configuration to ``/etc/ceph/ceph.conf`` in your ``admin node``::
[client.radosgw.gateway]
host = {hostname}
keyring = /etc/ceph/ceph.client.radosgw.keyring
rgw socket path = /var/run/ceph/ceph.radosgw.gateway.fastcgi.sock
log file = /var/log/radosgw/client.radosgw.gateway.log
rgw print continue = false
.. note:: ``Apache 2.4.9`` supports Unix Domain Socket (UDS) but as
``Ubuntu 14.04`` ships with ``Apache 2.4.7`` it doesn't have UDS support and
has to be configured for use with localhost TCP. A bug has been filed for
backporting UDS support in ``Apache 2.4.7`` for ``Ubuntu 14.04``.
See: `Backport support for UDS in Ubuntu Trusty`_
Here, ``{hostname}`` is the short hostname (output of command ``hostname -s``)
of the node that is going to provide the gateway service i.e., the
``gateway host``.
The ``[client.radosgw.gateway]`` portion of the gateway instance identifies this
portion of the Ceph configuration file as configuring a Ceph Storage Cluster
client where the client type is a Ceph Object Gateway (i.e., ``radosgw``).
.. note:: The last line in the configuration i.e., ``rgw print continue = false``
is added to avoid issues with ``PUT`` operations.
Once you finish the setup procedure, if you encounter issues with your
configuration, you can add debugging to the ``[global]`` section of your Ceph
configuration file and restart the gateway to help troubleshoot any
configuration issues. For example::
[global]
#append the following in the global section.
debug ms = 1
debug rgw = 20
Distribute updated Ceph configuration file
==========================================
The updated Ceph configuration file needs to be distributed to all Ceph cluster
nodes from the ``admin node``.
It involves the following steps:
#. Pull the updated ``ceph.conf`` from ``/etc/ceph/`` to the root directory of
the cluster in admin node (e.g. ``my-cluster`` directory). The contents of
``ceph.conf`` in ``my-cluster`` will get overwritten. To do so, execute the
following::
ceph-deploy --overwrite-conf config pull {hostname}
Here, ``{hostname}`` is the short hostname of the Ceph admin node.
#. Push the updated ``ceph.conf`` file from the admin node to all other nodes in
the cluster including the ``gateway host``::
ceph-deploy --overwrite-conf config push [HOST] [HOST...]
Give the hostnames of the other Ceph nodes in place of ``[HOST] [HOST...]``.
Copy ceph.client.admin.keyring from admin node to gateway host
==============================================================
As the ``gateway host`` can be a different node that is not part of the cluster,
the ``ceph.client.admin.keyring`` needs to be copied from the ``admin node`` to
the ``gateway host``. To do so, execute the following on ``admin node``::
sudo scp /etc/ceph/ceph.client.admin.keyring ceph@{hostname}:/home/ceph
ssh {hostname}
sudo mv ceph.client.admin.keyring /etc/ceph/ceph.client.admin.keyring
.. note:: The above step need not be executed if ``admin node`` is the
``gateway host``.
Create Data Directory
=====================
Deployment scripts may not create the default Ceph Object Gateway data
directory. Create data directories for each instance of a ``radosgw``
daemon (if you haven't done so already). The ``host`` variables in the
Ceph configuration file determine which host runs each instance of a
``radosgw`` daemon. The typical form specifies the ``radosgw`` daemon,
the cluster name and the daemon ID.
To create the directory on the ``gateway host``, execute the following::
sudo mkdir -p /var/lib/ceph/radosgw/ceph-radosgw.gateway
Adjust Socket Directory Permissions
===================================
On some distros, the ``radosgw`` daemon runs as the unprivileged ``apache``
UID, and this UID must have write access to the location where it will write
its socket file.
To grant permissions to the default socket location, execute the following on
the ``gateway host``::
sudo chown apache:apache /var/run/ceph
Change Log File Owner
=====================
On some distros, the ``radosgw`` daemon runs as the unprivileged ``apache`` UID,
but the ``root`` user owns the log file by default. You must change it to the
``apache`` user so that Apache can populate the log file. To do so, execute
the following::
sudo chown apache:apache /var/log/radosgw/client.radosgw.gateway.log
Start radosgw service
=====================
The Ceph Object gateway daemon needs to be started. To do so, execute the
following on the ``gateway host``:
On Debian-based distros::
sudo /etc/init.d/radosgw start
On RPM-based distros::
sudo /etc/init.d/ceph-radosgw start
Create a Gateway Configuration file
===================================
On the host where you installed the Ceph Object Gateway i.e., ``gateway host``,
create an ``rgw.conf`` file. Place the file in ``/etc/apache2/conf-available``
directory for ``Debian-based`` distros and in ``/etc/httpd/conf.d`` directory
for ``RPM-based`` distros. It is a Apache configuration file which is needed
for the ``radosgw`` service. This file must be readable by the web server.
Execute the following steps:
#. Create the file:
For Debian-based distros, execute::
sudo vi /etc/apache2/conf-available/rgw.conf
For RPM-based distros, execute::
sudo vi /etc/httpd/conf.d/rgw.conf
#. For distros with Apache 2.2 and early versions of Apache 2.4 that use
localhost TCP and do not support Unix Domain Socket, add the following
contents to the file::
<VirtualHost *:80>
ServerName localhost
DocumentRoot /var/www/html
ErrorLog /var/log/httpd/rgw_error.log
CustomLog /var/log/httpd/rgw_access.log combined
# LogLevel debug
RewriteEngine On
RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L]
SetEnv proxy-nokeepalive 1
ProxyPass / fcgi://localhost:9000/
</VirtualHost>
.. note:: For Debian-based distros replace ``/var/log/httpd/``
with ``/var/log/apache2``.
#. For distros with Apache 2.4.9 or later that support Unix Domain Socket,
add the following contents to the file::
<VirtualHost *:80>
ServerName localhost
DocumentRoot /var/www/html
ErrorLog /var/log/httpd/rgw_error.log
CustomLog /var/log/httpd/rgw_access.log combined
# LogLevel debug
RewriteEngine On
RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L]
SetEnv proxy-nokeepalive 1
ProxyPass / unix:///var/run/ceph/ceph.radosgw.gateway.fastcgi.sock|fcgi://localhost:9000/
</VirtualHost>
Restart Apache
==============
The Apache service needs to be restarted to accept the new configuration.
For Debian-based distros, run::
sudo service apache2 restart
For RPM-based distros, run::
sudo service httpd restart
Or::
sudo systemctl restart httpd
Using The Gateway
=================
To use the REST interfaces, first create an initial Ceph Object Gateway
user for the S3 interface. Then, create a subuser for the Swift interface.
See the `Admin Guide`_ for more details on user management.
Create a radosgw user for S3 access
------------------------------------
A ``radosgw`` user needs to be created and granted access. The command
``man radosgw-admin`` will provide information on additional command options.
To create the user, execute the following on the ``gateway host``::
sudo radosgw-admin user create --uid="testuser" --display-name="First User"
The output of the command will be something like the following::
{"user_id": "testuser",
"display_name": "First User",
"email": "",
"suspended": 0,
"max_buckets": 1000,
"auid": 0,
"subusers": [],
"keys": [
{ "user": "testuser",
"access_key": "I0PJDPCIYZ665MW88W9R",
"secret_key": "dxaXZ8U90SXydYzyS5ivamEP20hkLSUViiaR+ZDA"}],
"swift_keys": [],
"caps": [],
"op_mask": "read, write, delete",
"default_placement": "",
"placement_tags": [],
"bucket_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"user_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"temp_url_keys": []}
.. note:: The values of ``keys->access_key`` and ``keys->secret_key`` are
needed for access validation.
Create a Swift user
-------------------
A Swift subuser needs to be created if this kind of access is needed. Creating
a Swift user is a two step process. The first step is to create the user.
The second is to create the secret key.
Execute the following steps on the ``gateway host``:
Create the Swift user::
sudo radosgw-admin subuser create --uid=testuser --subuser=testuser:swift --access=full
The output will be something like the following::
{ "user_id": "testuser",
"display_name": "First User",
"email": "",
"suspended": 0,
"max_buckets": 1000,
"auid": 0,
"subusers": [
{ "id": "testuser:swift",
"permissions": "full-control"}],
"keys": [
{ "user": "testuser:swift",
"access_key": "3Y1LNW4Q6X0Y53A52DET",
"secret_key": ""},
{ "user": "testuser",
"access_key": "I0PJDPCIYZ665MW88W9R",
"secret_key": "dxaXZ8U90SXydYzyS5ivamEP20hkLSUViiaR+ZDA"}],
"swift_keys": [],
"caps": [],
"op_mask": "read, write, delete",
"default_placement": "",
"placement_tags": [],
"bucket_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"user_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"temp_url_keys": []}
Create the secret key::
sudo radosgw-admin key create --subuser=testuser:swift --key-type=swift --gen-secret
The output will be something like the following::
{ "user_id": "testuser",
"display_name": "First User",
"email": "",
"suspended": 0,
"max_buckets": 1000,
"auid": 0,
"subusers": [
{ "id": "testuser:swift",
"permissions": "full-control"}],
"keys": [
{ "user": "testuser:swift",
"access_key": "3Y1LNW4Q6X0Y53A52DET",
"secret_key": ""},
{ "user": "testuser",
"access_key": "I0PJDPCIYZ665MW88W9R",
"secret_key": "dxaXZ8U90SXydYzyS5ivamEP20hkLSUViiaR+ZDA"}],
"swift_keys": [
{ "user": "testuser:swift",
"secret_key": "244+fz2gSqoHwR3lYtSbIyomyPHf3i7rgSJrF\/IA"}],
"caps": [],
"op_mask": "read, write, delete",
"default_placement": "",
"placement_tags": [],
"bucket_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"user_quota": { "enabled": false,
"max_size_kb": -1,
"max_objects": -1},
"temp_url_keys": []}
Access Verification
===================
You then need to verify if the created users are able to access the gateway.
Test S3 access
--------------
You need to write and run a Python test script for verifying S3 access. The S3
access test script will connect to the ``radosgw``, create a new bucket and list
all buckets. The values for ``aws_access_key_id`` and ``aws_secret_access_key``
are taken from the values of ``access_key`` and ``secret_key`` returned by the
``radosgw_admin`` command.
Execute the following steps:
#. You will need to install the ``python-boto`` package.
For Debian-based distros, run::
sudo apt-get install python-boto
For RPM-based distros, run::
sudo yum install python-boto
#. Create the Python script::
vi s3test.py
#. Add the following contents to the file::
import boto
import boto.s3.connection
access_key = 'I0PJDPCIYZ665MW88W9R'
secret_key = 'dxaXZ8U90SXydYzyS5ivamEP20hkLSUViiaR+ZDA'
conn = boto.connect_s3(
aws_access_key_id = access_key,
aws_secret_access_key = secret_key,
host = '{hostname}',
is_secure=False,
calling_format = boto.s3.connection.OrdinaryCallingFormat(),
)
bucket = conn.create_bucket('my-new-bucket')
for bucket in conn.get_all_buckets():
print "{name}\t{created}".format(
name = bucket.name,
created = bucket.creation_date,
)
Replace ``{hostname}`` with the hostname of the host where you have
configured the gateway service i.e., the ``gateway host``.
#. Run the script::
python s3test.py
The output will be something like the following::
my-new-bucket 2015-02-16T17:09:10.000Z
Test swift access
-----------------
Swift access can be verified via the ``swift`` command line client. The command
``man swift`` will provide more information on available command line options.
To install ``swift`` client, execute the following:
For Debian-based distros::
sudo apt-get install python-setuptools
sudo easy_install pip
sudo pip install --upgrade setuptools
sudo pip install --upgrade python-swiftclient
For RPM-based distros::
sudo yum install python-setuptools
sudo easy_install pip
sudo pip install --upgrade setuptools
sudo pip install --upgrade python-swiftclient
To test swift access, execute the following::
swift -A http://{IP ADDRESS}/auth/1.0 -U testuser:swift -K {swift_secret_key} list
Replace ``{IP ADDRESS}`` with the public IP address of the gateway server and
``{swift_secret_key}`` with its value from the output of
``radosgw-admin key create`` command executed for the ``swift`` user.
For example::
swift -A http://10.19.143.116/auth/1.0 -U testuser:swift -K 244+fz2gSqoHwR3lYtSbIyomyPHf3i7rgSJrF/IA list
The output should be::
my-new-bucket
.. _Configuration Reference - Pools: ../config-ref#pools
.. _Pool Configuration: ../../rados/configuration/pool-pg-config-ref/
.. _Pools: ../../rados/operations/pools
.. _User Management: ../../rados/operations/user-management
.. _Backport support for UDS in Ubuntu Trusty: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1411030
.. _Admin Guide: ../admin