mirror of
https://github.com/ceph/ceph
synced 2024-12-22 03:22:00 +00:00
a566610aaa
Modify the examples to use the simpler syntax, not involving -- or grouping with quotes. Signed-off-by: Loic Dachary <loic-201408@dachary.org>
406 lines
11 KiB
ReStructuredText
406 lines
11 KiB
ReStructuredText
.. index:: control, commands
|
|
|
|
==================
|
|
Control Commands
|
|
==================
|
|
|
|
|
|
Monitor Commands
|
|
================
|
|
|
|
Monitor commands are issued using the ceph utility::
|
|
|
|
ceph [-m monhost] {command}
|
|
|
|
The command is usually (though not always) of the form::
|
|
|
|
ceph {subsystem} {command}
|
|
|
|
|
|
System Commands
|
|
===============
|
|
|
|
Execute the following to display the current status of the cluster. ::
|
|
|
|
ceph -s
|
|
ceph status
|
|
|
|
Execute the following to display a running summary of the status of the cluster,
|
|
and major events. ::
|
|
|
|
ceph -w
|
|
|
|
Execute the following to show the monitor quorum, including which monitors are
|
|
participating and which one is the leader. ::
|
|
|
|
ceph quorum_status
|
|
|
|
Execute the following to query the status of a single monitor, including whether
|
|
or not it is in the quorum. ::
|
|
|
|
ceph [-m monhost] mon_status
|
|
|
|
|
|
Authentication Subsystem
|
|
========================
|
|
|
|
To add a keyring for an OSD, execute the following::
|
|
|
|
ceph auth add {osd} {--in-file|-i} {path-to-osd-keyring}
|
|
|
|
To list the cluster's keys and their capabilities, execute the following::
|
|
|
|
ceph auth list
|
|
|
|
|
|
Placement Group Subsystem
|
|
=========================
|
|
|
|
To display the statistics for all placement groups, execute the following::
|
|
|
|
ceph pg dump [--format {format}]
|
|
|
|
The valid formats are ``plain`` (default) and ``json``.
|
|
|
|
To display the statistics for all placement groups stuck in a specified state,
|
|
execute the following::
|
|
|
|
ceph pg dump_stuck inactive|unclean|stale [--format {format}] [-t|--threshold {seconds}]
|
|
|
|
|
|
``--format`` may be ``plain`` (default) or ``json``
|
|
|
|
``--threshold`` defines how many seconds "stuck" is (default: 300)
|
|
|
|
**Inactive** Placement groups cannot process reads or writes because they are waiting for an OSD
|
|
with the most up-to-date data to come back.
|
|
|
|
**Unclean** Placement groups contain objects that are not replicated the desired number
|
|
of times. They should be recovering.
|
|
|
|
**Stale** Placement groups are in an unknown state - the OSDs that host them have not
|
|
reported to the monitor cluster in a while (configured by
|
|
``mon_osd_report_timeout``).
|
|
|
|
Delete "lost" objects or revert them to their prior state, either a previous version
|
|
or delete them if they were just created. ::
|
|
|
|
ceph pg {pgid} mark_unfound_lost revert|delete
|
|
|
|
|
|
OSD Subsystem
|
|
=============
|
|
|
|
Query OSD subsystem status. ::
|
|
|
|
ceph osd stat
|
|
|
|
Write a copy of the most recent OSD map to a file. See
|
|
`osdmaptool`_. ::
|
|
|
|
ceph osd getmap -o file
|
|
|
|
.. _osdmaptool: ../../man/8/osdmaptool
|
|
|
|
Write a copy of the crush map from the most recent OSD map to
|
|
file. ::
|
|
|
|
ceph osd getcrushmap -o file
|
|
|
|
The foregoing functionally equivalent to ::
|
|
|
|
ceph osd getmap -o /tmp/osdmap
|
|
osdmaptool /tmp/osdmap --export-crush file
|
|
|
|
Dump the OSD map. Valid formats for ``-f`` are ``plain`` and ``json``. If no
|
|
``--format`` option is given, the OSD map is dumped as plain text. ::
|
|
|
|
ceph osd dump [--format {format}]
|
|
|
|
Dump the OSD map as a tree with one line per OSD containing weight
|
|
and state. ::
|
|
|
|
ceph osd tree [--format {format}]
|
|
|
|
Find out where a specific object is or would be stored in the system::
|
|
|
|
ceph osd map <pool-name> <object-name>
|
|
|
|
Add or move a new item (OSD) with the given id/name/weight at the specified
|
|
location. ::
|
|
|
|
ceph osd crush set {id} {weight} [{loc1} [{loc2} ...]]
|
|
|
|
Remove an existing item from the CRUSH map. ::
|
|
|
|
ceph osd crush remove {id}
|
|
|
|
Move an existing bucket from one position in the hierarchy to another. ::
|
|
|
|
ceph osd crush move {id} {loc1} [{loc2} ...]
|
|
|
|
Set the weight of the item given by ``{name}`` to ``{weight}``. ::
|
|
|
|
ceph osd crush reweight {name} {weight}
|
|
|
|
Create a cluster snapshot. ::
|
|
|
|
ceph osd cluster_snap {name}
|
|
|
|
Mark an OSD as lost. This may result in permanent data loss. Use with caution. ::
|
|
|
|
ceph osd lost {id} [--yes-i-really-mean-it]
|
|
|
|
Create a new OSD. If no UUID is given, it will be set automatically when the OSD
|
|
starts up. ::
|
|
|
|
ceph osd create [{uuid}]
|
|
|
|
Remove the given OSD(s). ::
|
|
|
|
ceph osd rm [{id}...]
|
|
|
|
Query the current max_osd parameter in the OSD map. ::
|
|
|
|
ceph osd getmaxosd
|
|
|
|
Import the given OSD map. Note that this can be a bit dangerous,
|
|
since the OSD map includes dynamic state about which OSDs are current
|
|
on or offline; only do this if you've just modified a (very) recent
|
|
copy of the map. ::
|
|
|
|
ceph osd setmap -i file
|
|
|
|
Import the given crush map. ::
|
|
|
|
ceph osd setcrushmap -i file
|
|
|
|
Set the ``max_osd`` parameter in the OSD map. This is necessary when
|
|
expanding the storage cluster. ::
|
|
|
|
ceph osd setmaxosd
|
|
|
|
Mark OSD ``{osd-num}`` down. ::
|
|
|
|
ceph osd down {osd-num}
|
|
|
|
Mark OSD ``{osd-num}`` out of the distribution (i.e. allocated no data). ::
|
|
|
|
ceph osd out {osd-num}
|
|
|
|
Mark ``{osd-num}`` in the distribution (i.e. allocated data). ::
|
|
|
|
ceph osd in {osd-num}
|
|
|
|
List classes that are loaded in the ceph cluster. ::
|
|
|
|
ceph class list
|
|
|
|
Set or clear the pause flags in the OSD map. If set, no IO requests
|
|
will be sent to any OSD. Clearing the flags via unpause results in
|
|
resending pending requests. ::
|
|
|
|
ceph osd pause
|
|
ceph osd unpause
|
|
|
|
Set the weight of ``{osd-num}`` to ``{weight}``. Two OSDs with the
|
|
same weight will receive roughly the same number of I/O requests and
|
|
store approximately the same amount of data. ``ceph osd reweight``
|
|
sets an override weight on the OSD. This value is in the range 0 to 1,
|
|
and forces CRUSH to re-place (1-weight) of the data that would
|
|
otherwise live on this drive. It does not change the weights assigned
|
|
to the buckets above the OSD in the crush map, and is a corrective
|
|
measure in case the normal CRUSH distribution isn't working out quite
|
|
right. For instance, if one of your OSDs is at 90% and the others are
|
|
at 50%, you could reduce this weight to try and compensate for it. ::
|
|
|
|
ceph osd reweight {osd-num} {weight}
|
|
|
|
Reweights all the OSDs by reducing the weight of OSDs which are
|
|
heavily overused. By default it will adjust the weights downward on
|
|
OSDs which have 120% of the average utilization, but if you include
|
|
threshold it will use that percentage instead. ::
|
|
|
|
ceph osd reweight-by-utilization [threshold]
|
|
|
|
Adds/removes the address to/from the blacklist. When adding an address,
|
|
you can specify how long it should be blacklisted in seconds; otherwise,
|
|
it will default to 1 hour. A blacklisted address is prevented from
|
|
connecting to any OSD. Blacklisting is most often used to prevent a
|
|
lagging metadata server from making bad changes to data on the OSDs.
|
|
|
|
These commands are mostly only useful for failure testing, as
|
|
blacklists are normally maintained automatically and shouldn't need
|
|
manual intervention. ::
|
|
|
|
ceph osd blacklist add ADDRESS[:source_port] [TIME]
|
|
ceph osd blacklist rm ADDRESS[:source_port]
|
|
|
|
Creates/deletes a snapshot of a pool. ::
|
|
|
|
ceph osd pool mksnap {pool-name} {snap-name}
|
|
ceph osd pool rmsnap {pool-name} {snap-name}
|
|
|
|
Creates/deletes/renames a storage pool. ::
|
|
|
|
ceph osd pool create {pool-name} pg_num [pgp_num]
|
|
ceph osd pool delete {pool-name} [{pool-name} --yes-i-really-really-mean-it]
|
|
ceph osd pool rename {old-name} {new-name}
|
|
|
|
Changes a pool setting. ::
|
|
|
|
ceph osd pool set {pool-name} {field} {value}
|
|
|
|
Valid fields are:
|
|
|
|
* ``size``: Sets the number of copies of data in the pool.
|
|
* ``crash_replay_interval``: The number of seconds to allow
|
|
clients to replay acknowledged but uncommited requests.
|
|
* ``pg_num``: The placement group number.
|
|
* ``pgp_num``: Effective number when calculating pg placement.
|
|
* ``crush_ruleset``: rule number for mapping placement.
|
|
|
|
Get the value of a pool setting. ::
|
|
|
|
ceph osd pool get {pool-name} {field}
|
|
|
|
Valid fields are:
|
|
|
|
* ``pg_num``: The placement group number.
|
|
* ``pgp_num``: Effective number of placement groups when calculating placement.
|
|
* ``lpg_num``: The number of local placement groups.
|
|
* ``lpgp_num``: The number used for placing the local placement groups.
|
|
|
|
|
|
Sends a scrub command to OSD ``{osd-num}``. To send the command to all OSDs, use ``*``. ::
|
|
|
|
ceph osd scrub {osd-num}
|
|
|
|
Sends a repair command to OSD.N. To send the command to all OSDs, use ``*``. ::
|
|
|
|
ceph osd repair N
|
|
|
|
Runs a simple throughput benchmark against OSD.N, writing ``NUMBER_OF_OBJECTS``
|
|
in write requests of ``BYTES_PER_WRITE`` each. By default, the test
|
|
writes 1 GB in total in 4-MB increments. ::
|
|
|
|
ceph tell osd.N bench [NUMER_OF_OBJECTS] [BYTES_PER_WRITE]
|
|
|
|
|
|
MDS Subsystem
|
|
=============
|
|
|
|
Change configuration parameters on a running mds. ::
|
|
|
|
ceph tell mds.{mds-id} injectargs --{switch} {value} [--{switch} {value}]
|
|
|
|
Example::
|
|
|
|
ceph tell mds.0 injectargs --debug_ms 1 --debug_mds 10
|
|
|
|
Enables debug messages. ::
|
|
|
|
ceph mds stat
|
|
|
|
Displays the status of all metadata servers.
|
|
|
|
ceph mds fail 0
|
|
|
|
Marks the active MDS as failed, triggering failover to a standby if present.
|
|
|
|
.. todo:: ``ceph mds`` subcommands missing docs: set, dump, getmap, stop, setmap
|
|
|
|
|
|
Mon Subsystem
|
|
=============
|
|
|
|
Show monitor stats::
|
|
|
|
ceph mon stat
|
|
|
|
2011-12-14 10:40:59.044395 mon {- [mon,stat]
|
|
2011-12-14 10:40:59.057111 mon.1 -} 'e3: 5 mons at {a=10.1.2.3:6789/0,b=10.1.2.4:6789/0,c=10.1.2.5:6789/0,d=10.1.2.6:6789/0,e=10.1.2.7:6789/0}, election epoch 16, quorum 0,1,2,3' (0)
|
|
|
|
The ``quorum`` list at the end lists monitor nodes that are part of the current quorum.
|
|
|
|
This is also available more directly::
|
|
|
|
$ ./ceph quorum_status
|
|
|
|
2011-12-14 10:44:20.417705 mon {- [quorum_status]
|
|
2011-12-14 10:44:20.431890 mon.0 -}
|
|
|
|
.. code-block:: javascript
|
|
|
|
'{ "election_epoch": 10,
|
|
"quorum": [
|
|
0,
|
|
1,
|
|
2],
|
|
"monmap": { "epoch": 1,
|
|
"fsid": "444b489c-4f16-4b75-83f0-cb8097468898",
|
|
"modified": "2011-12-12 13:28:27.505520",
|
|
"created": "2011-12-12 13:28:27.505520",
|
|
"mons": [
|
|
{ "rank": 0,
|
|
"name": "a",
|
|
"addr": "127.0.0.1:6789\/0"},
|
|
{ "rank": 1,
|
|
"name": "b",
|
|
"addr": "127.0.0.1:6790\/0"},
|
|
{ "rank": 2,
|
|
"name": "c",
|
|
"addr": "127.0.0.1:6791\/0"}]}}' (0)
|
|
|
|
The above will block until a quorum is reached.
|
|
|
|
For a status of just the monitor you connect to (use ``-m HOST:PORT``
|
|
to select)::
|
|
|
|
ceph mon_status
|
|
|
|
|
|
2011-12-14 10:45:30.644414 mon {- [mon_status]
|
|
2011-12-14 10:45:30.644632 mon.0 -}
|
|
|
|
.. code-block:: javascript
|
|
|
|
'{ "name": "a",
|
|
"rank": 0,
|
|
"state": "leader",
|
|
"election_epoch": 10,
|
|
"quorum": [
|
|
0,
|
|
1,
|
|
2],
|
|
"outside_quorum": [],
|
|
"monmap": { "epoch": 1,
|
|
"fsid": "444b489c-4f16-4b75-83f0-cb8097468898",
|
|
"modified": "2011-12-12 13:28:27.505520",
|
|
"created": "2011-12-12 13:28:27.505520",
|
|
"mons": [
|
|
{ "rank": 0,
|
|
"name": "a",
|
|
"addr": "127.0.0.1:6789\/0"},
|
|
{ "rank": 1,
|
|
"name": "b",
|
|
"addr": "127.0.0.1:6790\/0"},
|
|
{ "rank": 2,
|
|
"name": "c",
|
|
"addr": "127.0.0.1:6791\/0"}]}}' (0)
|
|
|
|
A dump of the monitor state::
|
|
|
|
ceph mon dump
|
|
|
|
2011-12-14 10:43:08.015333 mon {- [mon,dump]
|
|
2011-12-14 10:43:08.015567 mon.0 -} 'dumped monmap epoch 1' (0)
|
|
epoch 1
|
|
fsid 444b489c-4f16-4b75-83f0-cb8097468898
|
|
last_changed 2011-12-12 13:28:27.505520
|
|
created 2011-12-12 13:28:27.505520
|
|
0: 127.0.0.1:6789/0 mon.a
|
|
1: 127.0.0.1:6790/0 mon.b
|
|
2: 127.0.0.1:6791/0 mon.c
|
|
|