mirror of
https://github.com/ceph/ceph
synced 2024-12-20 18:33:44 +00:00
330 lines
12 KiB
ReStructuredText
330 lines
12 KiB
ReStructuredText
==========================
|
|
BlueStore Config Reference
|
|
==========================
|
|
|
|
Devices
|
|
=======
|
|
|
|
BlueStore manages either one, two, or (in certain cases) three storage
|
|
devices.
|
|
|
|
In the simplest case, BlueStore consumes a single (primary) storage
|
|
device. The storage device is normally partitioned into two parts:
|
|
|
|
#. A small partition is formatted with XFS and contains basic metadata
|
|
for the OSD. This *data directory* includes information about the
|
|
OSD (its identifier, which cluster it belongs to, and its private
|
|
keyring).
|
|
|
|
#. The rest of the device is normally a large partition occupying the
|
|
rest of the device that is managed directly by BlueStore contains
|
|
all of the actual data. This *primary device* is normally identifed
|
|
by a ``block`` symlink in data directory.
|
|
|
|
It is also possible to deploy BlueStore across two additional devices:
|
|
|
|
* A *WAL device* can be used for BlueStore's internal journal or
|
|
write-ahead log. It is identified by the ``block.wal`` symlink in
|
|
the data directory. It is only useful to use a WAL device if the
|
|
device is faster than the primary device (e.g., when it is on an SSD
|
|
and the primary device is an HDD).
|
|
* A *DB device* can be used for storing BlueStore's internal metadata.
|
|
BlueStore (or rather, the embedded RocksDB) will put as much
|
|
metadata as it can on the DB device to improve performance. If the
|
|
DB device fills up, metadata will spill back onto the primary device
|
|
(where it would have been otherwise). Again, it is only helpful to
|
|
provision a DB device if it is faster than the primary device.
|
|
|
|
If there is only a small amount of fast storage available (e.g., less
|
|
than a gigabyte), we recommend using it as a WAL device. If there is
|
|
more, provisioning a DB device makes more sense. The BlueStore
|
|
journal will always be placed on the fastest device available, so
|
|
using a DB device will provide the same benefit that the WAL device
|
|
would while *also* allowing additional metadata to be stored there (if
|
|
it will fix).
|
|
|
|
A single-device BlueStore OSD can be provisioned with::
|
|
|
|
ceph-volume lvm prepare --bluestore --data <device>
|
|
|
|
To specify a WAL device and/or DB device, ::
|
|
|
|
ceph-volume lvm prepare --bluestore --data <device> --block.wal <wal-device> --block.db <db-device>
|
|
|
|
.. note:: --data can be a Logical Volume using the vg/lv notation. Other
|
|
devices can be existing logical volumes or GPT partitions
|
|
|
|
Cache size
|
|
==========
|
|
|
|
The amount of memory consumed by each OSD for BlueStore's cache is
|
|
determined by the ``bluestore_cache_size`` configuration option. If
|
|
that config option is not set (i.e., remains at 0), there is a
|
|
different default value that is used depending on whether an HDD or
|
|
SSD is used for the primary device (set by the
|
|
``bluestore_cache_size_ssd`` and ``bluestore_cache_size_hdd`` config
|
|
options).
|
|
|
|
BlueStore and the rest of the Ceph OSD does the best it can currently
|
|
to stick to the budgeted memory. Note that on top of the configured
|
|
cache size, there is also memory consumed by the OSD itself, and
|
|
generally some overhead due to memory fragmentation and other
|
|
allocator overhead.
|
|
|
|
The configured cache memory budget can be used in a few different ways:
|
|
|
|
* Key/Value metadata (i.e., RocksDB's internal cache)
|
|
* BlueStore metadata
|
|
* BlueStore data (i.e., recently read or written object data)
|
|
|
|
Cache memory usage is governed by the following options:
|
|
``bluestore_cache_meta_ratio``, ``bluestore_cache_kv_ratio``, and
|
|
``bluestore_cache_kv_max``. The fraction of the cache devoted to data
|
|
is 1.0 minus the meta and kv ratios. The memory devoted to kv
|
|
metadata (the RocksDB cache) is capped by ``bluestore_cache_kv_max``
|
|
since our testing indicates there are diminishing returns beyond a
|
|
certain point.
|
|
|
|
``bluestore_cache_size``
|
|
|
|
:Description: The amount of memory BlueStore will use for its cache. If zero, ``bluestore_cache_size_hdd`` or ``bluestore_cache_size_ssd`` will be used instead.
|
|
:Type: Unsigned Integer
|
|
:Required: Yes
|
|
:Default: ``0``
|
|
|
|
``bluestore_cache_size_hdd``
|
|
|
|
:Description: The default amount of memory BlueStore will use for its cache when backed by an HDD.
|
|
:Type: Unsigned Integer
|
|
:Required: Yes
|
|
:Default: ``1 * 1024 * 1024 * 1024`` (1 GB)
|
|
|
|
``bluestore_cache_size_ssd``
|
|
|
|
:Description: The default amount of memory BlueStore will use for its cache when backed by an SSD.
|
|
:Type: Unsigned Integer
|
|
:Required: Yes
|
|
:Default: ``3 * 1024 * 1024 * 1024`` (3 GB)
|
|
|
|
``bluestore_cache_meta_ratio``
|
|
|
|
:Description: The ratio of cache devoted to metadata.
|
|
:Type: Floating point
|
|
:Required: Yes
|
|
:Default: ``.01``
|
|
|
|
``bluestore_cache_kv_ratio``
|
|
|
|
:Description: The ratio of cache devoted to key/value data (rocksdb).
|
|
:Type: Floating point
|
|
:Required: Yes
|
|
:Default: ``.99``
|
|
|
|
``bluestore_cache_kv_max``
|
|
|
|
:Description: The maximum amount of cache devoted to key/value data (rocksdb).
|
|
:Type: Unsigned Integer
|
|
:Required: Yes
|
|
:Default: ``512 * 1024*1024`` (512 MB)
|
|
|
|
|
|
Checksums
|
|
=========
|
|
|
|
BlueStore checksums all metadata and data written to disk. Metadata
|
|
checksumming is handled by RocksDB and uses `crc32c`. Data
|
|
checksumming is done by BlueStore and can make use of `crc32c`,
|
|
`xxhash32`, or `xxhash64`. The default is `crc32c` and should be
|
|
suitable for most purposes.
|
|
|
|
Full data checksumming does increase the amount of metadata that
|
|
BlueStore must store and manage. When possible, e.g., when clients
|
|
hint that data is written and read sequentially, BlueStore will
|
|
checksum larger blocks, but in many cases it must store a checksum
|
|
value (usually 4 bytes) for every 4 kilobyte block of data.
|
|
|
|
It is possible to use a smaller checksum value by truncating the
|
|
checksum to two or one byte, reducing the metadata overhead. The
|
|
trade-off is that the probability that a random error will not be
|
|
detected is higher with a smaller checksum, going from about one in
|
|
four billion with a 32-bit (4 byte) checksum to one in 65,536 for a
|
|
16-bit (2 byte) checksum or one in 256 for an 8-bit (1 byte) checksum.
|
|
The smaller checksum values can be used by selecting `crc32c_16` or
|
|
`crc32c_8` as the checksum algorithm.
|
|
|
|
The *checksum algorithm* can be set either via a per-pool
|
|
``csum_type`` property or the global config option. For example, ::
|
|
|
|
ceph osd pool set <pool-name> csum_type <algorithm>
|
|
|
|
``bluestore_csum_type``
|
|
|
|
:Description: The default checksum algorithm to use.
|
|
:Type: String
|
|
:Required: Yes
|
|
:Valid Settings: ``none``, ``crc32c``, ``crc32c_16``, ``crc32c_8``, ``xxhash32``, ``xxhash64``
|
|
:Default: ``crc32c``
|
|
|
|
|
|
Inline Compression
|
|
==================
|
|
|
|
BlueStore supports inline compression using `snappy`, `zlib`, or
|
|
`lz4`. Please note that the `lz4` compression plugin is not
|
|
distributed in the official release.
|
|
|
|
Whether data in BlueStore is compressed is determined by a combination
|
|
of the *compression mode* and any hints associated with a write
|
|
operation. The modes are:
|
|
|
|
* **none**: Never compress data.
|
|
* **passive**: Do not compress data unless the write operation as a
|
|
*compressible* hint set.
|
|
* **aggressive**: Compress data unless the write operation as an
|
|
*incompressible* hint set.
|
|
* **force**: Try to compress data no matter what.
|
|
|
|
For more information about the *compressible* and *incompressible* IO
|
|
hints, see :c:func:`rados_set_alloc_hint`.
|
|
|
|
Note that regardless of the mode, if the size of the data chunk is not
|
|
reduced sufficiently it will not be used and the original
|
|
(uncompressed) data will be stored. For example, if the ``bluestore
|
|
compression required ratio`` is set to ``.7`` then the compressed data
|
|
must be 70% of the size of the original (or smaller).
|
|
|
|
The *compression mode*, *compression algorithm*, *compression required
|
|
ratio*, *min blob size*, and *max blob size* can be set either via a
|
|
per-pool property or a global config option. Pool properties can be
|
|
set with::
|
|
|
|
ceph osd pool set <pool-name> compression_algorithm <algorithm>
|
|
ceph osd pool set <pool-name> compression_mode <mode>
|
|
ceph osd pool set <pool-name> compression_required_ratio <ratio>
|
|
ceph osd pool set <pool-name> compression_min_blob_size <size>
|
|
ceph osd pool set <pool-name> compression_max_blob_size <size>
|
|
|
|
``bluestore compression algorithm``
|
|
|
|
:Description: The default compressor to use (if any) if the per-pool property
|
|
``compression_algorithm`` is not set. Note that zstd is *not*
|
|
recommended for bluestore due to high CPU overhead when
|
|
compressing small amounts of data.
|
|
:Type: String
|
|
:Required: No
|
|
:Valid Settings: ``lz4``, ``snappy``, ``zlib``, ``zstd``
|
|
:Default: ``snappy``
|
|
|
|
``bluestore compression mode``
|
|
|
|
:Description: The default policy for using compression if the per-pool property
|
|
``compression_mode`` is not set. ``none`` means never use
|
|
compression. ``passive`` means use compression when
|
|
:c:func:`clients hint <rados_set_alloc_hint>` that data is
|
|
compressible. ``aggressive`` means use compression unless
|
|
clients hint that data is not compressible. ``force`` means use
|
|
compression under all circumstances even if the clients hint that
|
|
the data is not compressible.
|
|
:Type: String
|
|
:Required: No
|
|
:Valid Settings: ``none``, ``passive``, ``aggressive``, ``force``
|
|
:Default: ``none``
|
|
|
|
``bluestore compression required ratio``
|
|
|
|
:Description: The ratio of the size of the data chunk after
|
|
compression relative to the original size must be at
|
|
least this small in order to store the compressed
|
|
version.
|
|
|
|
:Type: Floating point
|
|
:Required: No
|
|
:Default: .875
|
|
|
|
``bluestore compression min blob size``
|
|
|
|
:Description: Chunks smaller than this are never compressed.
|
|
The per-pool property ``compression_min_blob_size`` overrides
|
|
this setting.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 0
|
|
|
|
``bluestore compression min blob size hdd``
|
|
|
|
:Description: Default value of ``bluestore compression min blob size``
|
|
for rotational media.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 128K
|
|
|
|
``bluestore compression min blob size ssd``
|
|
|
|
:Description: Default value of ``bluestore compression min blob size``
|
|
for non-rotational (solid state) media.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 8K
|
|
|
|
``bluestore compression max blob size``
|
|
|
|
:Description: Chunks larger than this are broken into smaller blobs sizing
|
|
``bluestore compression max blob size`` before being compressed.
|
|
The per-pool property ``compression_max_blob_size`` overrides
|
|
this setting.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 0
|
|
|
|
``bluestore compression max blob size hdd``
|
|
|
|
:Description: Default value of ``bluestore compression max blob size``
|
|
for rotational media.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 512K
|
|
|
|
``bluestore compression max blob size ssd``
|
|
|
|
:Description: Default value of ``bluestore compression max blob size``
|
|
for non-rotational (solid state) media.
|
|
|
|
:Type: Unsigned Integer
|
|
:Required: No
|
|
:Default: 64K
|
|
|
|
SPDK Usage
|
|
==================
|
|
|
|
If you want to use SPDK driver for NVME SSD, you need to specify NVMe serial
|
|
number here with "spdk:" prefix for ``bluestore_block_path``.
|
|
|
|
For example, users can find the serial number with::
|
|
|
|
$ lspci -vvv -d 8086:0953 | grep "Device Serial Number"
|
|
|
|
and then set::
|
|
|
|
bluestore block path = spdk:...
|
|
|
|
If you want to run multiple SPDK instances per node, you must specify the
|
|
amount of dpdk memory size in MB each instance will use, to make sure each
|
|
instance uses its own dpdk memory
|
|
|
|
In most cases, we only need one device to serve as data, db, db wal purposes.
|
|
We need to make sure configurations below to make sure all IOs issued under
|
|
SPDK.::
|
|
|
|
bluestore_block_db_path = ""
|
|
bluestore_block_db_size = 0
|
|
bluestore_block_wal_path = ""
|
|
bluestore_block_wal_size = 0
|
|
|
|
Otherwise, the current implementation will setup symbol file to kernel
|
|
filesystem location and uses kernel driver to issue DB/WAL IO.
|