ceph/doc/rados/configuration/ceph-conf.rst

==================
 Configuring Ceph
==================

When you start the Ceph service, the initialization process activates a series
of daemons that run in the background. A :term:`Ceph Storage Cluster` runs 
three types of daemons:

- :term:`Ceph Monitor` (``ceph-mon``)
- :term:`Ceph Manager` (``ceph-mgr``)
- :term:`Ceph OSD Daemon` (``ceph-osd``)

Ceph Storage Clusters that support the :term:`Ceph Filesystem` run at
least one :term:`Ceph Metadata Server` (``ceph-mds``). Clusters that
support :term:`Ceph Object Storage` run Ceph Gateway daemons
(``radosgw``).

Each daemon has a series of configuration options, each of which has a
default values.  You may adjust the behavior of the system by changing these
configuration options.

Option names
============

All Ceph configuration options have a unique name consisting of words
formed with lower-case characters and connected with underscore
(``_``) characters.

When option names are specified on the command line, either underscore
(``_``) or dash (``-``) characters can be used interchangeable (e.g.,
``--mon-host`` is equivalent to ``--mon_host``).

When option names appear in configuration files, spaces can also be
used in place of underscore or dash.

Config sources
==============

Each Ceph daemon, process, and library will pull its configuration
from several sources, listed below.  Sources later in the list will
override those earlier in the list when both are present.

- the compiled-in default value
- the monitor cluster's centralized configuration database
- a configuration file stored on the local host
- environment variables
- command line arguments
- runtime overrides set by an administrator

One of the first things a Ceph process does on startup is parse the
configuration options provided via the command line, environment, and
local configuration file.  The process will then contact the monitor
cluster to retrieve configuration stored centrally for the entire
cluster.  Once a complete view of the configuration is available, the
daemon or process startup will proceed.

Bootstrap options
-----------------

Because some configuration options affect the process's ability to
contact the monitors, authenticate, and retrieve the cluster-stored
configuration, they may need to be stored locally on the node and set
in a local configuration file.  These options include:

  - ``mon_host``, the list of monitors for the cluster
  - ``mon_dns_serv_name`` (default: `ceph-mon`), the name of the DNS
    SRV record to check to identify the cluster monitors via DNS
  - ``mon_data``, ``osd_data``, ``mds_data``, ``mgr_data``, and
    similar options that define which local directory the daemon
    stores its data in.
  - ``keyring``, ``keyfile``, and/or ``key``, which can be used to
    specify the authentication credential to use to authenticate with
    the monitor.  Note that in most cases the default keyring location
    is in the data directory specified above.

In the vast majority of cases the default values of these are
appropriate, with the exception of the ``mon_host`` option that
identifies the addresses of the cluster's monitors.  When DNS is used
to identify monitors a local ceph configuration file can be avoided
entirely.

Skipping monitor config
-----------------------

Any process may be passed the option ``--no-mon-config`` to skip the
step that retrieves configuration from the cluster monitors.  This is
useful in cases where configuration is managed entirely via
configuration files or where the monitor cluster is currently down but
some maintenance activity needs to be done.


.. _ceph-conf-file:


Configuration sections
======================

Any given process or daemon has a single value for each configuration
option.  However, values for an option may vary across different
daemon types even daemons of the same type.  Ceph options that are
stored in the monitor configuration database or in local configuration
files are grouped into sections to indicate which daemons or clients
they apply to.

These sections include:

``global``

:Description: Settings under ``global`` affect all daemons and clients
              in a Ceph Storage Cluster.

:Example: ``log_file = /var/log/ceph/$cluster-$type.$id.log``

``mon``

:Description: Settings under ``mon`` affect all ``ceph-mon`` daemons in
              the Ceph Storage Cluster, and override the same setting in 
              ``global``.

:Example: ``mon_cluster_log_to_syslog = true``


``mgr``

:Description: Settings in the ``mgr`` section affect all ``ceph-mgr`` daemons in
              the Ceph Storage Cluster, and override the same setting in 
              ``global``.

:Example: ``mgr_stats_period = 10``

``osd``

:Description: Settings under ``osd`` affect all ``ceph-osd`` daemons in
              the Ceph Storage Cluster, and override the same setting in
              ``global``.

:Example: ``osd_op_queue = wpq``

``mds``

:Description: Settings in the ``mds`` section affect all ``ceph-mds`` daemons in
              the Ceph Storage Cluster, and override the same setting in
              ``global``.

:Example: ``mds_cache_size = 10G``

``client``

:Description: Settings under ``client`` affect all Ceph Clients
              (e.g., mounted Ceph Filesystems, mounted Ceph Block Devices,
              etc.) as well as Rados Gateway (RGW) daemons.

:Example: ``objecter_inflight_ops = 512``


Sections may also specify an individual daemon or client name.  For example,
``mon.foo``, ``osd.123``, and ``client.smith`` are all valid section names.


Any given daemon will draw it's settings from the global section, the
daemon or client type section, and the section sharing its name.
Settings in the most-specific section take precedence, so for example
if the same option is specified in both ``global``, ``mon``, and
``mon.foo`` on the same source (i.e., in the same configurationfile),
the ``mon.foo`` value will be used.

Note that values from the local configuration file always take
precedence over values from the monitor configuration database,
regardless of which section they appear in.


.. _ceph-metavariables:

Metavariables
=============

Metavariables simplify Ceph Storage Cluster configuration
dramatically. When a metavariable is set in a configuration value,
Ceph expands the metavariable into a concrete value at the time the
configuration value is used. Ceph metavariables are similar to variable expansion in the Bash shell.

Ceph supports the following metavariables: 

``$cluster``

:Description: Expands to the Ceph Storage Cluster name. Useful when running 
              multiple Ceph Storage Clusters on the same hardware.

:Example: ``/etc/ceph/$cluster.keyring``
:Default: ``ceph``


``$type``

:Description: Expands to a daemon or process type (e.g., ``mds``, ``osd``, or ``mon``)

:Example: ``/var/lib/ceph/$type``


``$id``

:Description: Expands to the daemon or client identifier. For
              ``osd.0``, this would be ``0``; for ``mds.a``, it would
              be ``a``.

:Example: ``/var/lib/ceph/$type/$cluster-$id``


``$host``

:Description: Expands to the host name where the process is running.


``$name``

:Description: Expands to ``$type.$id``.
:Example: ``/var/run/ceph/$cluster-$name.asok``

``$pid``

:Description: Expands to daemon pid.
:Example: ``/var/run/ceph/$cluster-$name-$pid.asok``



The Configuration File
======================

On startup, Ceph processes search for a configuration file in the
following locations:

#. ``$CEPH_CONF`` (*i.e.,* the path following the ``$CEPH_CONF``
   environment variable)
#. ``-c path/path``  (*i.e.,* the ``-c`` command line argument)
#. ``/etc/ceph/$cluster.conf``
#. ``~/.ceph/$cluster.conf``
#. ``./$cluster.conf`` (*i.e.,* in the current working directory)
#. On FreeBSD systems only, ``/usr/local/etc/ceph/$cluster.conf``

where ``$cluster`` is the cluster's name (default ``ceph``).

The Ceph configuration file uses an *ini* style syntax. You can add comments
by preceding comments with a pound sign (#) or a semi-colon (;).  For example:

.. code-block:: ini

	# <--A number (#) sign precedes a comment.
	; A comment may be anything.
	# Comments always follow a semi-colon (;) or a pound (#) on each line.
	# The end of the line terminates a comment.
	# We recommend that you provide comments in your configuration file(s).


.. _ceph-conf-settings:

Config file section names
-------------------------

The configuration file is divided into sections. Each section must begin with a
valid configuration section name (see `Configuration sections`_, above)
surrounded by square brackets. For example,

.. code-block:: ini

	[global]
	debug ms = 0
	
	[osd]
	debug ms = 1

	[osd.1]
	debug ms = 10

	[osd.2]
	debug ms = 10



Monitor configuration database
==============================

The monitor cluster manages a database of configuration options that
can be consumed by the entire cluster, enabling streamlined central
configuration management for the entire system.  The vast majority of
configuration options can and should be stored here for ease of
administration and transparency.

A handful of settings may still need to be stored in local
configuration files because they affect the ability to connect to the
monitors, authenticate, and fetch configuration information.  In most
cases this is limited to the ``mon_host`` option, although this can
also be avoided through the use of DNS SRV records.

Sections and masks
------------------

Configuration options stored by the monitor can live in a global
section, daemon type section, or specific daemon section, just like
options in a configuration file can.

In addition, options may also have a *mask* associated with them to
further restrict which daemons or clients the option applies to.
Masks take two forms:

#. ``type:location`` where *type* is a CRUSH property like `rack` or
   `host`, and *location* is a value for that property.  For example,
   ``host:foo`` would limit the option only to daemons or clients
   running on a particular host.
#. ``class:device-class`` where *device-class* is the name of a CRUSH
   device class (e.g., ``hdd`` or ``ssd``).  For example,
   ``class:ssd`` would limit the option only to OSDs backed by SSDs.
   (This mask has no effect for non-OSD daemons or clients.)

When setting a configuration option, the `who` may be a section name,
a mask, or a combination of both separated by a slash (``/``)
character.  For example, ``osd/rack:foo`` would mean all OSD daemons
in the ``foo`` rack.

When viewing configuration options, the section name and mask are
generally separated out into separate fields or columns to ease readability.


Commands
--------

The following CLI commands are used to configure the cluster:

* ``ceph config dump`` will dump the entire configuration database for
  the cluster.

* ``ceph config get <who>`` will dump the configuration for a specific
  daemon or client (e.g., ``mds.a``), as stored in the monitors'
  configuration database.

* ``ceph config set <who> <option> <value>`` will set a configuration
  option in the monitors' configuration database.

* ``ceph config show <who>`` will show the reported running
  configuration for a running daemon.  These settings may differ from
  those stored by the monitors if there are also local configuration
  files in use or options have been overridden on the command line or
  at run time.  The source of the option values is reported as part
  of the output.

* ``ceph config assimilate-conf -i <input file> -o <output file>``
  will injest a configuration file from *input file* and move any
  valid options into the monitors' configuration database.  Any
  settings that are unrecognized, invalid, or cannot be controlled by
  the monitor will be returned in an abbreviated config file stored in
  *output file*.  This command is useful for transitioning from legacy
  configuration files to centralized monitor-based configuration.


Help
====

You can get help for a particular option with::

  ceph config help <option>

Note that this will use the configuration schema that is compiled into the running monitors.  If you have a mixed-version cluster (e.g., during an upgrade), you might also want to query the option schema from a specific running daemon::

  ceph daemon <name> config help [option]

For example,::

  $ ceph config help log_file
  log_file - path to log file
    (std::string, basic)
    Default (non-daemon):
    Default (daemon): /var/log/ceph/$cluster-$name.log
    Can update at runtime: false
    See also: [log_to_stderr,err_to_stderr,log_to_syslog,err_to_syslog]

or::

  $ ceph config help log_file -f json-pretty
  {
      "name": "log_file",
      "type": "std::string",
      "level": "basic",
      "desc": "path to log file",
      "long_desc": "",
      "default": "",
      "daemon_default": "/var/log/ceph/$cluster-$name.log",
      "tags": [],
      "services": [],
      "see_also": [
          "log_to_stderr",
          "err_to_stderr",
          "log_to_syslog",
          "err_to_syslog"
      ],
      "enum_values": [],
      "min": "",
      "max": "",
      "can_update_at_runtime": false
  }

The ``level`` property can be any of `basic`, `advanced`, or `dev`.
The `dev` options are intended for use by developers, generally for
testing purposes, and are not recommended for use by operators.


Runtime Changes
===============

In most cases, Ceph allows you to make changes to the configuration of
a daemon at runtime. This capability is quite useful for
increasing/decreasing logging output, enabling/disabling debug
settings, and even for runtime optimization.

Generally speaking, configuration options can be updated in the usual
way via the ``ceph config set`` command.  For example, do enable the debug log level on a specific OSD,::

  ceph config set osd.123 debug_ms 20

Note that if the same option is also customized in a local
configuration file, the monitor setting will be ignored (it has a
lower priority than the local config file).

Override values
---------------

You can also temporarily set an option using the `tell` or `daemon`
interfaces on the Ceph CLI.  These *override* values are ephemeral in
that they only affect the running process and are discarded/lost if
the daemon or process restarts.

Override values can be set in two ways:

#. From any host, we can send a message to a daemon over the network with::

     ceph tell <name> config set <option> <value>

   For example,::

     ceph tell osd.123 config set debug_osd 20

   The `tell` command can also accept a wildcard for the daemon
   identifier.  For example, to adjust the debug level on all OSD
   daemons,::

     ceph tell osd.* config set debug_osd 20

#. From the host the process is running on, we can connect directly to
   the process via a socket in ``/var/run/ceph`` with::

     ceph daemon <name> config set <option> <value>

   For example,::

     ceph daemon osd.4 config set debug_osd 20

Note that in the ``ceph config show`` command output these temporary
values will be shown with a source of ``override``.


Viewing runtime settings
========================

You can see the current options set for a running daemon with the ``ceph config show`` command.  For example,::

  ceph config show osd.0

will show you the (non-default) options for that daemon.  You can also look at a specific option with::

  ceph config show osd.0 debug_osd

or view all options (even those with default values) with::

  ceph config show-with-defaults osd.0

You can also observe settings for a running daemon by connecting to it from the local host via the admin socket.  For example,::

  ceph daemon osd.0 config show

will dump all current settings,::

  ceph daemon osd.0 config diff

will show only non-default settings (as well as where the value came from: a config file, the monitor, an override, etc.), and::

  ceph daemon osd.0 config get debug_osd

will report the value of a single option.