============================================ Contributing to Ceph: A Guide for Developers ============================================ :Author: Loic Dachary :Author: Nathan Cutler :License: Creative Commons Attribution-ShareAlike (CC BY-SA) .. note:: The old (pre-2016) developer documentation has been moved to :doc:`/dev/index-old`. .. contents:: :depth: 3 Introduction ============ This guide has two aims. First, it should lower the barrier to entry for software developers who wish to get involved in the Ceph project. Second, it should serve as a reference for Ceph developers. We assume that readers are already familiar with Ceph (the distributed object store and file system designed to provide excellent performance, reliability and scalability). If not, please refer to the `project website`_ and especially the `publications list`_. .. _`project website`: http://ceph.com .. _`publications list`: https://ceph.com/resources/publications/ Since this document is to be consumed by developers, who are assumed to have Internet access, topics covered elsewhere, either within the Ceph documentation or elsewhere on the web, are treated by linking. If you notice that a link is broken or if you know of a better link, please `report it as a bug`_. .. _`report it as a bug`: http://tracker.ceph.com/projects/ceph/issues/new Essentials (tl;dr) ================== This chapter presents essential information that every Ceph developer needs to know. Leads ----- The Ceph project is led by Sage Weil. In addition, each major project component has its own lead. The following table shows all the leads and their nicks on `GitHub`_: .. _github: https://github.com/ ========= =============== ============= Scope Lead GitHub nick ========= =============== ============= Ceph Sage Weil liewegas RADOS Samuel Just athanatos RGW Yehuda Sadeh yehudasa RBD Jason Dillaman dillaman CephFS John Spray jcsp Build/Ops Ken Dreyer ktdreyer ========= =============== ============= The Ceph-specific acronyms in the table are explained in :doc:`/architecture`. History ------- See the `History chapter of the Wikipedia article`_. .. _`History chapter of the Wikipedia article`: https://en.wikipedia.org/wiki/Ceph_%28software%29#History Licensing --------- Ceph is free software. Unless stated otherwise, the Ceph source code is distributed under the terms of the LGPL2.1. For full details, see `the file COPYING in the top-level directory of the source-code tree`_. .. _`the file COPYING in the top-level directory of the source-code tree`: https://github.com/ceph/ceph/blob/master/COPYING Source code repositories ------------------------ The source code of Ceph lives on `GitHub`_ in a number of repositories below the `Ceph "organization"`_. .. _`Ceph "organization"`: https://github.com/ceph To make a meaningful contribution to the project as a developer, a working knowledge of git_ is essential. .. _git: https://git-scm.com/documentation Although the `Ceph "organization"`_ includes several software repositories, this document covers only one: https://github.com/ceph/ceph. Redmine issue tracker --------------------- Although `GitHub`_ is used for code, Ceph-related issues (Bugs, Features, Backports, Documentation, etc.) are tracked at http://tracker.ceph.com, which is powered by `Redmine`_. .. _Redmine: http://www.redmine.org The tracker has a Ceph project with a number of subprojects loosely corresponding to the various architectural components (see :doc:`/architecture`). Mere `registration`_ in the tracker automatically grants permissions sufficient to open new issues and comment on existing ones. .. _registration: http://tracker.ceph.com/account/register To report a bug or propose a new feature, `jump to the Ceph project`_ and click on `New issue`_. .. _`jump to the Ceph project`: http://tracker.ceph.com/projects/ceph .. _`New issue`: http://tracker.ceph.com/projects/ceph/issues/new Mailing list ------------ Ceph development email discussions take place on the mailing list ``ceph-devel@vger.kernel.org``. The list is open to all. Subscribe by sending a message to ``majordomo@vger.kernel.org`` with the line: :: subscribe ceph-devel in the body of the message. There are also `other Ceph-related mailing lists`_. .. _`other Ceph-related mailing lists`: https://ceph.com/resources/mailing-list-irc/ IRC --- In addition to mailing lists, the Ceph community also communicates in real time using `Internet Relay Chat`_. .. _`Internet Relay Chat`: http://www.irchelp.org/ See https://ceph.com/resources/mailing-list-irc/ for how to set up your IRC client and a list of channels. Submitting patches ------------------ The canonical instructions for submitting patches are contained in the `the file CONTRIBUTING.rst in the top-level directory of the source-code tree`_. There may be some overlap between this guide and that file. .. _`the file CONTRIBUTING.rst in the top-level directory of the source-code tree`: https://github.com/ceph/ceph/blob/master/CONTRIBUTING.rst All newcomers are encouraged to read that file carefully. Building from source -------------------- See instructions at :doc:`/install/build-ceph`. Development-mode cluster ------------------------ See :doc:`/dev/quick_guide`. Backporting ----------- All bugfixes should be merged to the ``master`` branch before being backported. To flag a bugfix for backporting, make sure it has a `tracker issue`_ associated with it and set the ``Backport`` field to a comma-separated list of previous releases (e.g. "hammer,jewel") that you think need the backport. The rest (including the actual backporting) will be taken care of by the `Stable Releases and Backports`_ team. .. _`tracker issue`: http://tracker.ceph.com/ .. _`Stable Releases and Backports`: http://tracker.ceph.com/projects/ceph-releases/wiki What is merged where and when ? =============================== Commits are merged into branches according to criteria that change during the lifecycle of a Ceph release. This chapter is the inventory of what can be merged in which branch at a given point in time. Development releases (i.e. x.0.z) --------------------------------- What ? ^^^^^^ * features * bug fixes Where ? ^^^^^^^ Features are merged to the master branch. Bug fixes should be merged to the corresponding named branch (e.g. "jewel" for 10.0.z, "kraken" for 11.0.z, etc.). However, this is not mandatory - bug fixes can be merged to the master branch as well, since the master branch is periodically merged to the named branch during the development releases phase. In either case, if the bugfix is important it can also be flagged for backport to one or more previous stable releases. When ? ^^^^^^ After the stable release candidates of the previous release enters phase 2 (see below). For example: the "jewel" named branch was created when the infernalis release candidates entered phase 2. From this point on, master was no longer associated with infernalis. As soon as the named branch of the next stable release is created, master starts getting periodically merged into it. Branch merges ^^^^^^^^^^^^^ * The branch of the stable release is merged periodically into master. * The master branch is merged periodically into the branch of the stable release. * The master is merged into the branch of the stable release immediately after each development x.0.z release. Stable release candidates (i.e. x.1.z) phase 1 ---------------------------------------------- What ? ^^^^^^ * bug fixes only Where ? ^^^^^^^ The branch of the stable release (e.g. "jewel" for 10.0.z, "kraken" for 11.0.z, etc.) or master. Bug fixes should be merged to the named branch corresponding to the stable release candidate (e.g. "jewel" for 10.1.z) or to master. During this phase, all commits to master will be merged to the named branch, and vice versa. In other words, it makes no difference whether a commit is merged to the named branch or to master - it will make it into the next release candidate either way. When ? ^^^^^^ After the first stable release candidate is published, i.e. after the x.1.0 tag is set in the release branch. Branch merges ^^^^^^^^^^^^^ * The branch of the stable release is merged periodically into master. * The master branch is merged periodically into the branch of the stable release. * The master is merged into the branch of the stable release immediately after each x.1.z release candidate. Stable release candidates (i.e. x.1.z) phase 2 ---------------------------------------------- What ? ^^^^^^ * bug fixes only Where ? ^^^^^^^ The branch of the stable release (e.g. "jewel" for 10.0.z, "kraken" for 11.0.z, etc.). During this phase, all commits to the named branch will be merged into master. Cherry-picking to the named branch during release candidate phase 2 is done manually since the official backporting process only begins when the release is pronounced "stable". When ? ^^^^^^ After Sage Weil decides it is time for phase 2 to happen. Branch merges ^^^^^^^^^^^^^ * The branch of the stable release is merged periodically into master. Stable releases (i.e. x.2.z) ---------------------------- What ? ^^^^^^ * bug fixes * features are sometime accepted * commits should be cherry-picked from master when possible * commits that are not cherry-picked from master must be about a bug unique to the stable release * see also `the backport HOWTO`_ .. _`the backport HOWTO`: http://tracker.ceph.com/projects/ceph-releases/wiki/HOWTO#HOWTO Where ? ^^^^^^^ The branch of the stable release (hammer for 0.94.x, infernalis for 9.2.x, etc.) When ? ^^^^^^ After the stable release is published, i.e. after the "vx.2.0" tag is set in the release branch. Branch merges ^^^^^^^^^^^^^ Never Issue tracker ============= See `Redmine issue tracker`_ for a brief introduction to the Ceph Issue Tracker. Ceph developers use the issue tracker to 1. keep track of issues - bugs, fix requests, feature requests, backport requests, etc. 2. communicate with other developers and keep them informed as work on the issues progresses. Issue tracker conventions ------------------------- When you start working on an existing issue, it's nice to let the other developers know this - to avoid duplication of labor. Typically, this is done by changing the :code:`Assignee` field (to yourself) and changing the :code:`Status` to *In progress*. Newcomers to the Ceph community typically do not have sufficient privileges to update these fields, however: they can simply update the issue with a brief note. .. table:: Meanings of some commonly used statuses ================ =========================================== Status Meaning ================ =========================================== New Initial status In Progress Somebody is working on it Need Review Pull request is open with a fix Pending Backport Fix has been merged, backport(s) pending Resolved Fix and backports (if any) have been merged ================ =========================================== Basic workflow ============== The following chart illustrates basic development workflow: .. ditaa:: Upstream Code Your Local Environment /----------\ git clone /-------------\ | Ceph | -------------------------> | ceph/master | \----------/ \-------------/ ^ | | | git branch fix_1 | git merge | | v /----------------\ git commit --amend /-------------\ | make check |---------------------> | ceph/fix_1 | | ceph--qa--suite| \-------------/ \----------------/ | ^ | fix changes | | test changes | review | git commit | | | v /--------------\ /-------------\ | github |<---------------------- | ceph/fix_1 | | pull request | git push \-------------/ \--------------/ Below we present an explanation of this chart. The explanation is written with the assumption that you, the reader, are a beginning developer who has an idea for a bugfix, but do not know exactly how to proceed. Update the tracker ------------------ Before you start, you should know the `Issue tracker`_ number of the bug you intend to fix. If there is no tracker issue, now is the time to create one. The tracker is there to explain the issue (bug) to your fellow Ceph developers and keep them informed as you make progress toward resolution. To this end, then, provide a descriptive title as well as sufficient information and details in the description. If you have sufficient tracker permissions, assign the bug to yourself by changing the ``Assignee`` field. If your tracker permissions have not yet been elevated, simply add a comment to the issue with a short message like "I am working on this issue". Upstream code ------------- This section, and the ones that follow, correspond to the nodes in the above chart. The upstream code lives in https://github.com/ceph/ceph.git, which is sometimes referred to as the "upstream repo", or simply "upstream". As the chart illustrates, we will make a local copy of this code, modify it, test our modifications, and submit the modifications back to the upstream repo for review. A local copy of the upstream code is made by 1. forking the upstream repo on GitHub, and 2. cloning your fork to make a local working copy See the `the GitHub documentation `_ for detailed instructions on forking. In short, if your GitHub username is "mygithubaccount", your fork of the upstream repo will show up at https://github.com/mygithubaccount/ceph. Once you have created your fork, you clone it by doing: .. code:: $ git clone https://github.com/mygithubaccount/ceph While it is possible to clone the upstream repo directly, in this case you must fork it first. Forking is what enables us to open a `GitHub pull request`_. For more information on using GitHub, refer to `GitHub Help `_. Local environment ----------------- In the local environment created in the previous step, you now have a copy of the ``master`` branch in ``remotes/origin/master``. Since the fork (https://github.com/mygithubaccount/ceph.git) is frozen in time and the upstream repo (https://github.com/ceph/ceph.git, typically abbreviated to ``ceph/ceph.git``) is updated frequently by other developers, you will need to sync your fork periodically. To do this, first add the upstream repo as a "remote" and fetch it:: $ git remote add ceph https://github.com/ceph/ceph.git $ git fetch ceph Fetching downloads all objects (commits, branches) that were added since the last sync. After running these commands, all the branches from ``ceph/ceph.git`` are downloaded to the local git repo as ``remotes/ceph/$BRANCH_NAME`` and can be referenced as ``ceph/$BRANCH_NAME`` in certain git commands. For example, your local ``master`` branch can be reset to the upstream Ceph ``master`` branch by doing:: $ git fetch ceph $ git checkout master $ git reset --hard ceph/master Finally, the ``master`` branch of your fork can then be synced to upstream master by:: $ git push -u origin master Bugfix branch ------------- Next, create a branch for the bugfix: .. code:: $ git checkout master $ git checkout -b fix_1 $ git push -u origin fix_1 This creates a ``fix_1`` branch locally and in our GitHub fork. At this point, the ``fix_1`` branch is identical to the ``master`` branch, but not for long! You are now ready to modify the code. Fix bug locally --------------- At this point, change the status of the tracker issue to "In progress" to communicate to the other Ceph developers that you have begun working on a fix. If you don't have permission to change that field, your comment that you are working on the issue is sufficient. Possibly, your fix is very simple and requires only minimal testing. More likely, it will be an iterative process involving trial and error, not to mention skill. An explanation of how to fix bugs is beyond the scope of this document. Instead, we focus on the mechanics of the process in the context of the Ceph project. A detailed discussion of the tools available for validating your bugfixes, see the `Testing`_ chapter. For now, let us just assume that you have finished work on the bugfix and that you have tested it and believe it works. Commit the changes to your local branch using the ``--signoff`` option:: $ git commit -as and push the changes to your fork:: $ git push origin fix_1 GitHub pull request ------------------- The next step is to open a GitHub pull request. The purpose of this step is to make your bugfix available to the community of Ceph developers. They will review it and may do additional testing on it. In short, this is the point where you "go public" with your modifications. Psychologically, you should be prepared to receive suggestions and constructive criticism. Don't worry! In our experience, the Ceph project is a friendly place! If you are uncertain how to use pull requests, you may read `this GitHub pull request tutorial`_. .. _`this GitHub pull request tutorial`: https://help.github.com/articles/using-pull-requests/ For some ideas on what constitutes a "good" pull request, see the `Git Commit Good Practice`_ article at the `OpenStack Project Wiki`_. .. _`Git Commit Good Practice`: https://wiki.openstack.org/wiki/GitCommitMessages .. _`OpenStack Project Wiki`: https://wiki.openstack.org/wiki/Main_Page Once your pull request (PR) is opened, update the `Issue tracker`_ by adding a comment to the bug pointing the other developers to your PR. The update can be as simple as:: *PR*: https://github.com/ceph/ceph/pull/$NUMBER_OF_YOUR_PULL_REQUEST Automated PR validation ----------------------- When your PR hits GitHub, the Ceph project's `Continuous Integration (CI) `_ infrastructure will test it automatically. At the time of this writing (March 2016), the automated CI testing included a test to check that the commits in the PR are properly signed (see `Submitting patches`_) and a ``make check`` test. The latter, ``make check``, builds the PR and runs it through a battery of tests. These tests run on machines operated by the Ceph Continuous Integration (CI) team. When the tests complete, the result will be shown on GitHub in the pull request itself. You can (and should) also test your modifications before you open a PR. Refer to the `Testing`_ chapter for details. Integration tests AKA ceph-qa-suite ----------------------------------- Since Ceph is a complex beast, it may also be necessary to test your fix to see how it behaves on real clusters running either on real or virtual hardware. Tests designed for this purpose live in the `ceph/qa sub-directory`_ and are run via the `teuthology framework`_. .. _`ceph/qa sub-directory`: https://github.com/ceph/ceph/tree/master/qa/ .. _`teuthology repository`: https://github.com/ceph/teuthology .. _`teuthology framework`: https://github.com/ceph/teuthology If you have access to an OpenStack tenant, you are encouraged to run the integration tests yourself using `ceph-workbench ceph-qa-suite`_, and to post the test results to the PR. .. _`ceph-workbench ceph-qa-suite`: http://ceph-workbench.readthedocs.org/ The Ceph community has access to the `Sepia lab `_ where integration tests can be run on real hardware. Other developers may add tags like "needs-qa" to your PR. This allows PRs that need testing to be merged into a single branch and tested all at the same time. Since teuthology suites can take hours (even days in some cases) to run, this can save a lot of time. Integration testing is discussed in more detail in the `Testing`_ chapter. Code review ----------- Once your bugfix has been thoroughly tested, or even during this process, it will be subjected to code review by other developers. This typically takes the form of correspondence in the PR itself, but can be supplemented by discussions on `IRC`_ and the `Mailing list`_. Amending your PR ---------------- While your PR is going through `Testing`_ and `Code review`_, you can modify it at any time by editing files in your local branch. After the changes are committed locally (to the ``fix_1`` branch in our example), they need to be pushed to GitHub so they appear in the PR. Modifying the PR is done by adding commits to the ``fix_1`` branch upon which it is based, often followed by rebasing to modify the branch's git history. See `this tutorial `_ for a good introduction to rebasing. When you are done with your modifications, you will need to force push your branch with: .. code:: $ git push --force origin fix_1 Merge ----- The bugfixing process culminates when one of the project leads decides to merge your PR. When this happens, it is a signal for you (or the lead who merged the PR) to change the `Issue tracker`_ status to "Resolved". Some issues may be flagged for backporting, in which case the status should be changed to "Pending Backport" (see the `Backporting`_ chapter for details). Testing ======= Ceph has two types of tests: "make check" tests and integration tests. The former are run via `GNU Make `, and the latter are run via the `teuthology framework`_. The following two chapters examine the "make check" and integration tests in detail. Testing - make check ==================== After compiling Ceph, the ``make check`` command can be used to run the code through a battery of tests covering various aspects of Ceph. For inclusion in "make check", a test must: * bind ports that do not conflict with other tests * not require root access * not require more than one machine to run * complete within a few minutes While it is possible to run ``make check`` directly, it can be tricky to correctly set up your environment. Fortunately, a script is provided to make it easier run "make check" on your code. It can be run from the top-level directory of the Ceph source tree by doing:: $ ./run-make-check.sh You will need a minimum of 8GB of RAM and 32GB of free disk space for this command to complete successfully on x86_64 (other architectures may have different constraints). Depending on your hardware, it can take from 20 minutes to three hours to complete, but it's worth the wait. Future sections --------------- * Principles of make check tests * Where to find test results * How to interpret test results * Find the corresponding source code * Writing make check tests * Make check caveats Testing - integration tests =========================== When a test requires multiple machines, root access or lasts for a longer time (for example, to simulate a realistic Ceph deployment), it is deemed to be an integration test. Integration tests are organized into "suites", which are defined in the `ceph/qa sub-directory`_ and run with the ``teuthology-suite`` command. The ``teuthology-suite`` command is part of the `teuthology framework`_. In the sections that follow we attempt to provide a detailed introduction to that framework from the perspective of a beginning Ceph developer. Teuthology consumes packages ---------------------------- It may take some time to understand the significance of this fact, but it is `very` significant. It means that automated tests can be conducted on multiple platforms using the same packages (RPM, DEB) that can be installed on any machine running those platforms. Teuthology has a `list of platforms that it supports `_ (as of March 2016 the list consisted of "CentOS 7.2" and "Ubuntu 14.04"). It expects to be provided pre-built Ceph packages for these platforms. Teuthology deploys these platforms on machines (bare-metal or cloud-provisioned), installs the packages on them, and deploys Ceph clusters on them - all as called for by the test. The nightlies ------------- A number of integration tests are run on a regular basis in the `Sepia lab`_ against the official Ceph repositories (on the ``master`` development branch and the stable branches). Traditionally, these tests are called "the nightlies" because the Ceph core developers used to live and work in the same time zone and from their perspective the tests were run overnight. The results of the nightlies are published at http://pulpito.ceph.com/ and http://pulpito.ovh.sepia.ceph.com:8081/. The developer nick shows in the test results URL and in the first column of the Pulpito dashboard. The results are also reported on the `ceph-qa mailing list `_ for analysis. Suites inventory ---------------- The ``suites`` directory of the `ceph/qa sub-directory`_ contains all the integration tests, for all the Ceph components. `ceph-deploy `_ install a Ceph cluster with ``ceph-deploy`` (`ceph-deploy man page`_) `ceph-disk `_ verify init scripts (upstart etc.) and udev integration with ``ceph-disk`` (`ceph-disk man page`_), with and without `dmcrypt `_ support. `dummy `_ get a machine, do nothing and return success (commonly used to verify the integration testing infrastructure works as expected) `fs `_ test CephFS `kcephfs `_ test the CephFS kernel module `krbd `_ test the RBD kernel module `powercycle `_ verify the Ceph cluster behaves when machines are powered off and on again `rados `_ run Ceph clusters including OSDs and MONs, under various conditions of stress `rbd `_ run RBD tests using actual Ceph clusters, with and without qemu `rgw `_ run RGW tests using actual Ceph clusters `smoke `_ run tests that exercise the Ceph API with an actual Ceph cluster `teuthology `_ verify that teuthology can run integration tests, with and without OpenStack `upgrade `_ for various versions of Ceph, verify that upgrades can happen without disrupting an ongoing workload .. _`ceph-deploy man page`: ../../man/8/ceph-deploy .. _`ceph-disk man page`: ../../man/8/ceph-disk teuthology-describe-tests ------------------------- In February 2016, a new feature called ``teuthology-describe-tests`` was added to the `teuthology framework`_ to facilitate documentation and better understanding of integration tests (`feature announcement `_). The upshot is that tests can be documented by embedding ``meta:`` annotations in the yaml files used to define the tests. The results can be seen in the `ceph-qa-suite wiki `_. Since this is a new feature, many yaml files have yet to be annotated. Developers are encouraged to improve the documentation, in terms of both coverage and quality. How integration tests are run ----------------------------- Given that - as a new Ceph developer - you will typically not have access to the `Sepia lab`_, you may rightly ask how you can run the integration tests in your own environment. One option is to set up a teuthology cluster on bare metal. Though this is a non-trivial task, it `is` possible. Here are `some notes `_ to get you started if you decide to go this route. If you have access to an OpenStack tenant, you have another option: the `teuthology framework`_ has an OpenStack backend, which is documented `here `__. This OpenStack backend can build packages from a given git commit or branch, provision VMs, install the packages and run integration tests on those VMs. This process is controlled using a tool called `ceph-workbench ceph-qa-suite`_. This tool also automates publishing of test results at http://teuthology-logs.public.ceph.com. Running integration tests on your code contributions and publishing the results allows reviewers to verify that changes to the code base do not cause regressions, or to analyze test failures when they do occur. Every teuthology cluster, whether bare-metal or cloud-provisioned, has a so-called "teuthology machine" from which tests suites are triggered using the ``teuthology-suite`` command. A detailed and up-to-date description of each `teuthology-suite`_ option is available by running the following command on the teuthology machine:: $ teuthology-suite --help .. _teuthology-suite: http://docs.ceph.com/teuthology/docs/teuthology.suite.html How integration tests are defined --------------------------------- Integration tests are defined by yaml files found in the ``suites`` subdirectory of the `ceph/qa sub-directory`_ and implemented by python code found in the ``tasks`` subdirectory. Some tests ("standalone tests") are defined in a single yaml file, while other tests are defined by a directory tree containing yaml files that are combined, at runtime, into a larger yaml file. Reading a standalone test ------------------------- Let us first examine a standalone test, or "singleton". Here is a commented example using the integration test `rados/singleton/all/admin-socket.yaml `_ :: roles: - - mon.a - osd.0 - osd.1 tasks: - install: - ceph: - admin_socket: osd.0: version: git_version: help: config show: config set filestore_dump_file /tmp/foo: perf dump: perf schema: The ``roles`` array determines the composition of the cluster (how many MONs, OSDs, etc.) on which this test is designed to run, as well as how these roles will be distributed over the machines in the testing cluster. In this case, there is only one element in the top-level array: therefore, only one machine is allocated to the test. The nested array declares that this machine shall run a MON with id ``a`` (that is the ``mon.a`` in the list of roles) and two OSDs (``osd.0`` and ``osd.1``). The body of the test is in the ``tasks`` array: each element is evaluated in order, causing the corresponding python file found in the ``tasks`` subdirectory of the `teuthology repository`_ or `ceph/qa sub-directory`_ to be run. "Running" in this case means calling the ``task()`` function defined in that file. In this case, the `install `_ task comes first. It installs the Ceph packages on each machine (as defined by the ``roles`` array). A full description of the ``install`` task is `found in the python file `_ (search for "def task"). The ``ceph`` task, which is documented `here `__ (again, search for "def task"), starts OSDs and MONs (and possibly MDSs as well) as required by the ``roles`` array. In this example, it will start one MON (``mon.a``) and two OSDs (``osd.0`` and ``osd.1``), all on the same machine. Control moves to the next task when the Ceph cluster reaches ``HEALTH_OK`` state. The next task is ``admin_socket`` (`source code `_). The parameter of the ``admin_socket`` task (and any other task) is a structure which is interpreted as documented in the task. In this example the parameter is a set of commands to be sent to the admin socket of ``osd.0``. The task verifies that each of them returns on success (i.e. exit code zero). This test can be run with:: $ teuthology-suite --suite rados/singleton/all/admin-socket.yaml fs/ext4.yaml Test descriptions ----------------- Each test has a "test description", which is similar to a directory path, but not the same. In the case of a standalone test, like the one in `Reading a standalone test`_, the test description is identical to the relative path (starting from the ``suites/`` directory of the `ceph/qa sub-directory`_) of the yaml file defining the test. Much more commonly, tests are defined not by a single yaml file, but by a `directory tree of yaml files`. At runtime, the tree is walked and all yaml files (facets) are combined into larger yaml "programs" that define the tests. A full listing of the yaml defining the test is included at the beginning of every test log. In these cases, the description of each test consists of the subdirectory under `suites/ `_ containing the yaml facets, followed by an expression in curly braces (``{}``) consisting of a list of yaml facets in order of concatenation. For instance the test description:: ceph-disk/basic/{distros/centos_7.0.yaml tasks/ceph-disk.yaml} signifies the concatenation of two files: * ceph-disk/basic/distros/centos_7.0.yaml * ceph-disk/basic/tasks/ceph-disk.yaml How are tests built from directories? ------------------------------------- As noted in the previous section, most tests are not defined in a single yaml file, but rather as a `combination` of files collected from a directory tree within the ``suites/`` subdirectory of the `ceph/qa sub-directory`_. The set of all tests defined by a given subdirectory of ``suites/`` is called an "integration test suite", or a "teuthology suite". Combination of yaml facets is controlled by special files (``%`` and ``+``) that are placed within the directory tree and can be thought of as operators. The ``%`` file is the "convolution" operator and ``+`` signifies concatenation. Convolution operator -------------------- The convolution operator, implemented as an empty file called ``%``, tells teuthology to construct a test matrix from yaml facets found in subdirectories below the directory containing the operator. For example, the `ceph-disk suite `_ is defined by the ``suites/ceph-disk/`` tree, which consists of the files and subdirectories in the following structure:: directory: ceph-disk/basic file: % directory: distros file: centos_7.0.yaml file: ubuntu_14.04.yaml directory: tasks file: ceph-disk.yaml This is interpreted as a 2x1 matrix consisting of two tests: 1. ceph-disk/basic/{distros/centos_7.0.yaml tasks/ceph-disk.yaml} 2. ceph-disk/basic/{distros/ubuntu_14.04.yaml tasks/ceph-disk.yaml} i.e. the concatenation of centos_7.0.yaml and ceph-disk.yaml and the concatenation of ubuntu_14.04.yaml and ceph-disk.yaml, respectively. In human terms, this means that the task found in ``ceph-disk.yaml`` is intended to run on both CentOS 7.0 and Ubuntu 14.04. Without the file percent, the ``ceph-disk`` tree would be interpreted as three standalone tests: * ceph-disk/basic/distros/centos_7.0.yaml * ceph-disk/basic/distros/ubuntu_14.04.yaml * ceph-disk/basic/tasks/ceph-disk.yaml (which would of course be wrong in this case). Referring to the `ceph/qa sub-directory`_, you will notice that the ``centos_7.0.yaml`` and ``ubuntu_14.04.yaml`` files in the ``suites/ceph-disk/basic/distros/`` directory are implemented as symlinks. By using symlinks instead of copying, a single file can appear in multiple suites. This eases the maintenance of the test framework as a whole. All the tests generated from the ``suites/ceph-disk/`` directory tree (also known as the "ceph-disk suite") can be run with:: $ teuthology-suite --suite ceph-disk An individual test from the `ceph-disk suite`_ can be run by adding the ``--filter`` option:: $ teuthology-suite \ --suite ceph-disk/basic \ --filter 'ceph-disk/basic/{distros/ubuntu_14.04.yaml tasks/ceph-disk.yaml}' .. note: To run a standalone test like the one in `Reading a standalone test`_, ``--suite`` alone is sufficient. If you want to run a single test from a suite that is defined as a directory tree, ``--suite`` must be combined with ``--filter``. This is because the ``--suite`` option understands POSIX relative paths only. Concatenation operator ---------------------- For even greater flexibility in sharing yaml files between suites, the special file plus (``+``) can be used to concatenate files within a directory. For instance, consider the `suites/rbd/thrash `_ tree:: directory: rbd/thrash file: % directory: clusters file: + file: fixed-2.yaml file: openstack.yaml directory: workloads file: rbd_api_tests_copy_on_read.yaml file: rbd_api_tests.yaml This creates two tests: * rbd/thrash/{clusters/fixed-2.yaml clusters/openstack.yaml workloads/rbd_api_tests_copy_on_read.yaml} * rbd/thrash/{clusters/fixed-2.yaml clusters/openstack.yaml workloads/rbd_api_tests.yaml} Because the ``clusters/`` subdirectory contains the special file plus (``+``), all the other files in that subdirectory (``fixed-2.yaml`` and ``openstack.yaml`` in this case) are concatenated together and treated as a single file. Without the special file plus, they would have been convolved with the files from the workloads directory to create a 2x2 matrix: * rbd/thrash/{clusters/openstack.yaml workloads/rbd_api_tests_copy_on_read.yaml} * rbd/thrash/{clusters/openstack.yaml workloads/rbd_api_tests.yaml} * rbd/thrash/{clusters/fixed-2.yaml workloads/rbd_api_tests_copy_on_read.yaml} * rbd/thrash/{clusters/fixed-2.yaml workloads/rbd_api_tests.yaml} The ``clusters/fixed-2.yaml`` file is shared among many suites to define the following ``roles``:: roles: - [mon.a, mon.c, osd.0, osd.1, osd.2, client.0] - [mon.b, osd.3, osd.4, osd.5, client.1] The ``rbd/thrash`` suite as defined above, consisting of two tests, can be run with:: $ teuthology-suite --suite rbd/thrash A single test from the rbd/thrash suite can be run by adding the ``--filter`` option:: $ teuthology-suite \ --suite rbd/thrash \ --filter 'rbd/thrash/{clusters/fixed-2.yaml clusters/openstack.yaml workloads/rbd_api_tests_copy_on_read.yaml}' Filtering tests by their description ------------------------------------ When a few jobs fail and need to be run again, the ``--filter`` option can be used to select tests with a matching description. For instance, if the ``rados`` suite fails the `all/peer.yaml `_ test, the following will only run the tests that contain this file:: teuthology-suite --suite rados --filter all/peer.yaml The ``--filter-out`` option does the opposite (it matches tests that do `not` contain a given string), and can be combined with the ``--filter`` option. Both ``--filter`` and ``--filter-out`` take a comma-separated list of strings (which means the comma character is implicitly forbidden in filenames found in the `ceph/qa sub-directory`_). For instance:: teuthology-suite --suite rados --filter all/peer.yaml,all/rest-api.yaml will run tests that contain either `all/peer.yaml `_ or `all/rest-api.yaml `_ Each string is looked up anywhere in the test description and has to be an exact match: they are not regular expressions. Reducing the number of tests ---------------------------- The ``rados`` suite generates thousands of tests out of a few hundred files. For instance, all tests in the `rados/thrash suite `_ run for ``xfs``, ``btrfs`` and ``ext4`` because they are combined (via special file ``%``) with the `fs directory `_ All integration tests are required to be run before a Ceph release is published. When merely verifying whether a contribution can be merged without risking a trivial regression, it is enough to run a subset. The ``--subset`` option can be used to reduce the number of tests that are triggered. For instance:: teuthology-suite --suite rados --subset 0/4000 will run as few tests as possible. The tradeoff in this case is that some tests will only run on ``xfs`` and not on ``ext4`` or ``btrfs``, but no matter how small a ratio is provided in the ``--subset``, teuthology will still ensure that all files in the suite are in at least one test. Understanding the actual logic that drives this requires reading the teuthology source code. The ``--limit`` option only runs the first ``N`` tests in the suite: this is rarely useful, however, because there is no way to control which test will be first. Testing in the cloud ==================== In this chapter, we will explain in detail how use an OpenStack tenant as an environment for Ceph integration testing. Assumptions and caveat ---------------------- We assume that: 1. you are the only person using the tenant 2. you have the credentials 3. the tenant supports the ``nova`` and ``cinder`` APIs Caveat: be aware that, as of this writing (July 2016), testing in OpenStack clouds is a new feature. Things may not work as advertised. If you run into trouble, ask for help on `IRC`_ or the `Mailing list`_, or open a bug report at the `ceph-workbench bug tracker`_. .. _`ceph-workbench bug tracker`: http://ceph-workbench.dachary.org/root/ceph-workbench/issues Prepare tenant -------------- If you have not tried to use ``ceph-workbench`` with this tenant before, proceed to the next step. To start with a clean slate, login to your tenant via the Horizon dashboard and: * terminate the ``teuthology`` and ``packages-repository`` instances, if any * delete the ``teuthology`` security group * delete the ``teuthology`` and ``teuthology-myself`` key pairs Also do the above if you ever get key-related errors ("invalid key", etc.) when trying to schedule suites. Getting ceph-workbench ---------------------- Since testing in the cloud is done using the `ceph-workbench ceph-qa-suite`_ tool, you will need to install that first. It is designed to be installed via Docker, so if you don't have Docker running on your development machine, take care of that first. The Docker project has a good tutorial called `Get Started with Docker Engine for Linux `_ if you unsure how to proceed. Once Docker is up and running, install ``ceph-workbench`` by following the `Installation instructions in the ceph-workbench documentation `_. Linking ceph-workbench with your OpenStack tenant ------------------------------------------------- Before you can trigger your first teuthology suite, you will need to link ``ceph-workbench`` with your OpenStack account. First, download a ``openrc.sh`` file by clicking on the "Download OpenStack RC File" button, which can be found in the "API Access" tab of the "Access & Security" dialog of the OpenStack Horizon dashboard. Second, create a ``~/.ceph-workbench`` directory, set its permissions to 700, and move the ``openrc.sh`` file into it. Make sure that the filename is exactly ``~/.ceph-workbench/openrc.sh``. Third, edit the file so it does not ask for your OpenStack password interactively. Comment out the relevant lines and replace them with something like:: export OS_PASSWORD="aiVeth0aejee3eep8rogho3eep7Pha6ek" When `ceph-workbench ceph-qa-suite`_ connects to your OpenStack tenant for the first time, it will generate two keypairs: ``teuthology-myself`` and ``teuthology``. .. If this is not the first time you have tried to use .. `ceph-workbench ceph-qa-suite`_ with this tenant, make sure to delete any .. stale keypairs with these names! Run the dummy suite ------------------- You are now ready to take your OpenStack teuthology setup for a test drive:: $ ceph-workbench ceph-qa-suite --suite dummy Be forewarned that the first run of `ceph-workbench ceph-qa-suite`_ on a pristine tenant will take a long time to complete because it downloads a VM image and during this time the command may not produce any output. The images are cached in OpenStack, so they are only downloaded once. Subsequent runs of the same command will complete faster. Although ``dummy`` suite does not run any tests, in all other respects it behaves just like a teuthology suite and produces some of the same artifacts. The last bit of output should look something like this:: pulpito web interface: http://149.202.168.201:8081/ ssh access : ssh -i /home/smithfarm/.ceph-workbench/teuthology-myself.pem ubuntu@149.202.168.201 # logs in /usr/share/nginx/html What this means is that `ceph-workbench ceph-qa-suite`_ triggered the test suite run. It does not mean that the suite run has completed. To monitor progress of the run, check the Pulpito web interface URL periodically, or if you are impatient, ssh to the teuthology machine using the ssh command shown and do:: $ tail -f /var/log/teuthology.* The `/usr/share/nginx/html` directory contains the complete logs of the test suite. If we had provided the ``--upload`` option to the `ceph-workbench ceph-qa-suite`_ command, these logs would have been uploaded to http://teuthology-logs.public.ceph.com. Run a standalone test --------------------- The standalone test explained in `Reading a standalone test`_ can be run with the following command:: $ ceph-workbench ceph-qa-suite --suite rados/singleton/all/admin-socket.yaml This will run the suite shown on the current ``master`` branch of ``ceph/ceph.git``. You can specify a different branch with the ``--ceph`` option, and even a different git repo with the ``--ceph-git-url`` option. (Run ``ceph-workbench ceph-qa-suite --help`` for an up-to-date list of available options.) The first run of a suite will also take a long time, because ceph packages have to be built, first. Again, the packages so built are cached and `ceph-workbench ceph-qa-suite`_ will not build identical packages a second time. Interrupt a running suite ------------------------- Teuthology suites take time to run. From time to time one may wish to interrupt a running suite. One obvious way to do this is:: ceph-workbench ceph-qa-suite --teardown This destroys all VMs created by `ceph-workbench ceph-qa-suite`_ and returns the OpenStack tenant to a "clean slate". Sometimes you may wish to interrupt the running suite, but keep the logs, the teuthology VM, the packages-repository VM, etc. To do this, you can ``ssh`` to the teuthology VM (using the ``ssh access`` command reported when you triggered the suite -- see `Run the dummy suite`_) and, once there:: sudo /etc/init.d/teuthology restart This will keep the teuthology machine, the logs and the packages-repository instance but nuke everything else. Upload logs to archive server ----------------------------- Since the teuthology instance in OpenStack is only semi-permanent, with limited space for storing logs, ``teuthology-openstack`` provides an ``--upload`` option which, if included in the ``ceph-workbench ceph-qa-suite`` command, will cause logs from all failed jobs to be uploaded to the log archive server maintained by the Ceph project. The logs will appear at the URL:: http://teuthology-logs.public.ceph.com/$RUN where ``$RUN`` is the name of the run. It will be a string like this:: ubuntu-2016-07-23_16:08:12-rados-hammer-backports---basic-openstack Even if you don't providing the ``--upload`` option, however, all the logs can still be found on the teuthology machine in the directory ``/usr/share/nginx/html``. Provision VMs ad hoc -------------------- From the teuthology VM, it is possible to provision machines on an "ad hoc" basis, to use however you like. The magic incantation is:: teuthology-lock --lock-many $NUMBER_OF_MACHINES \ --os-type $OPERATING_SYSTEM \ --os-version $OS_VERSION \ --machine-type openstack \ --owner $EMAIL_ADDRESS The command must be issued from the ``~/teuthology`` directory. The possible values for ``OPERATING_SYSTEM`` AND ``OS_VERSION`` can be found by examining the contents of the directory ``teuthology/openstack/``. For example:: teuthology-lock --lock-many 1 --os-type ubuntu --os-version 16.04 \ --machine-type openstack --owner foo@example.com When you are finished with the machine, find it in the list of machines:: openstack server list to determine the name or ID, and then terminate it with:: openstack server delete $NAME_OR_ID Deploy a cluster for manual testing ----------------------------------- The `teuthology framework`_ and `ceph-workbench ceph-qa-suite`_ are versatile tools that automatically provision Ceph clusters in the cloud and run various tests on them in an automated fashion. This enables a single engineer, in a matter of hours, to perform thousands of tests that would keep dozens of human testers occupied for days or weeks if conducted manually. However, there are times when the automated tests do not cover a particular scenario and manual testing is desired. It turns out that it is simple to adapt a test to stop and wait after the Ceph installation phase, and the engineer can then ssh into the running cluster. Simply add the following snippet in the desired place within the test YAML and schedule a run with the test:: tasks: - exec: client.0: - sleep 1000000000 # forever (Make sure you have a ``client.0`` defined in your ``roles`` stanza or adapt accordingly.) The same effect can be achieved using the ``interactive`` task:: tasks: - interactive By following the test log, you can determine when the test cluster has entered the "sleep forever" condition. At that point, you can ssh to the teuthology machine and from there to one of the target VMs (OpenStack) or teuthology worker machines machine (Sepia) where the test cluster is running. The VMs (or "instances" in OpenStack terminology) created by `ceph-workbench ceph-qa-suite`_ are named as follows: ``teuthology`` - the teuthology machine ``packages-repository`` - VM where packages are stored ``ceph-*`` - VM where packages are built ``target*`` - machines where tests are run The VMs named ``target*`` are used by tests. If you are monitoring the teuthology log for a given test, the hostnames of these target machines can be found out by searching for the string ``Locked targets``:: 2016-03-20T11:39:06.166 INFO:teuthology.task.internal:Locked targets: target149202171058.teuthology: null target149202171059.teuthology: null The IP addresses of the target machines can be found by running ``openstack server list`` on the teuthology machine, but the target VM hostnames (e.g. ``target149202171058.teuthology``) are resolvable within the teuthology cluster. .. WIP .. === .. .. Building RPM packages .. --------------------- .. .. Ceph is regularly built and packaged for a number of major Linux .. distributions. At the time of this writing, these included CentOS, Debian, .. Fedora, openSUSE, and Ubuntu. .. .. Architecture .. ============ .. .. Ceph is a collection of components built on top of RADOS and provide .. services (RBD, RGW, CephFS) and APIs (S3, Swift, POSIX) for the user to .. store and retrieve data. .. .. See :doc:`/architecture` for an overview of Ceph architecture. The .. following sections treat each of the major architectural components .. in more detail, with links to code and tests. .. .. FIXME The following are just stubs. These need to be developed into .. detailed descriptions of the various high-level components (RADOS, RGW, .. etc.) with breakdowns of their respective subcomponents. .. .. FIXME Later, in the Testing chapter I would like to take another look .. at these components/subcomponents with a focus on how they are tested. .. .. RADOS .. ----- .. .. RADOS stands for "Reliable, Autonomic Distributed Object Store". In a Ceph .. cluster, all data are stored in objects, and RADOS is the component responsible .. for that. .. .. RADOS itself can be further broken down into Monitors, Object Storage Daemons .. (OSDs), and client APIs (librados). Monitors and OSDs are introduced at .. :doc:`/start/intro`. The client library is explained at .. :doc:`/rados/api/index`. .. .. RGW .. --- .. .. RGW stands for RADOS Gateway. Using the embedded HTTP server civetweb_ or .. Apache FastCGI, RGW provides a REST interface to RADOS objects. .. .. .. _civetweb: https://github.com/civetweb/civetweb .. .. A more thorough introduction to RGW can be found at :doc:`/radosgw/index`. .. .. RBD .. --- .. .. RBD stands for RADOS Block Device. It enables a Ceph cluster to store disk .. images, and includes in-kernel code enabling RBD images to be mounted. .. .. To delve further into RBD, see :doc:`/rbd/rbd`. .. .. CephFS .. ------ .. .. CephFS is a distributed file system that enables a Ceph cluster to be used as a NAS. .. .. File system metadata is managed by Meta Data Server (MDS) daemons. The Ceph .. file system is explained in more detail at :doc:`/cephfs/index`. ..