================ CephFS Mirroring ================ .. note:: CephFS mirroring feature is currently under development. Interfaces detailed in this document might change during the development cycle. CephFS will support asynchronous replication of snapshots to a remote CephFS filesystem via `cephfs-mirror` tool. Snapshots are synchronized by mirroring snapshot data followed by creating a snapshot with the same name (for a given directory on the remote filesystem) as the snapshot being synchronized. Key Idea -------- For a given snapshot pair in a directory, `cephfs-mirror` daemon uses readdir diff to identify changes in a directory tree. The diffs are applied to directory in the remote filesystem thereby only synchronizing files that have changed between two snapshots. This feature is tracked here: https://tracker.ceph.com/issues/47034 .. note:: Synchronizing hardlinks is not supported -- hardlinked files get synchronized as separate files. Mirroring Design ---------------- CephFS will support asynchronous replication of snapshots to a remote CephFS filesystem via `cephfs-mirror` tool. For a given directory, snapshots are synchronized by transferring snapshot data to the remote filesystem and creating a snapshot with the same name as the snapshot being synchronized. Change Detection ---------------- The first snapshot to get synchronized involves bulk transfer of data to the remotee filesystem. Subsequent snapshot synchronization transfers changed/modified files. Identifying changed files between two snapshots (one of which is already synchronized), involves (efficiently) walking two (snapshot) trees. Since one of the snapshots is already synchronized, scanning the two snapshots locally would suffice. For the most part, identifying changed files between two snapshot does not involve querying the remote filesystem. However, there are cases where it is essential to query the remote filesystem: Failed Synchronization ---------------------- Failure to transfer snapshot data (which could be due to a variety of reasons) leaves the remote filesystem with incomplete data. Although retrying synchronization most likely overcomes transient issues, non-recoverable errors would need to be handled. When a snapshot synchronization hits a non-recoverable error, the snapshot is noted for failed synchronization and gets skipped. This is done either manually by the operator or when the number of consecutive retries (post-failure) hits a configured limit. Skipping a "failed" snapshot leaves incomplete data on the remote filesystem. When the next snapshot is chosen for synchronization, local scanning of (two) snapshots is not feasible, since certain files (which were part of the "failed" snapshot) may have been transferred to the remote filesystem but do not exist in the "next" chosen snapshot. In such a case, scanning the two snapshots "locally" for changes would ignore the incomplete data on the remote filesystem left behind. In such a case identifying changes would need to compare files between the snapshot and the remote filesystem. Alternatively, the remote filesystem data could be purged followed by bulk transfer of data from the next chosen snapshot. Subsequent snapshots can then rely on scanning local snapshots for identifying changes to be transferred. Deleted Snapshots ----------------- Snapshots on the primary filesystem can be deleted even during synchronization. This needs to be handled by the mirror daemon and poses the same issues as mention above. Moreover, mirroring can be disabled in midst of snapshots being synchronized and enabled after deleting snapshots (including the one under synchronization) and poses the same set of issues. Snapshot Synchronization Order ------------------------------ Although the order in which snapshots get chosen for synchronization does not matter, it may be beneficial to pick snapshots based on creation order (using snap-id). Snapshot Incarnation -------------------- A snapshot may be deleted and recreated (with the same name) with different contents. An "old" snapshot could have been synchronized (earlier) and the recreation of the snapshot could have been done when mirroring was disabled. Using snapshot names to infer the point-of-continuation would result in the "new" snapshot (incarnation) never getting picked up for synchronization. Snapshots on the secondary filesystem stores the snap-id of the snapshot it was synchronized from. This metadata is stored in `SnapInfo` structure. Interfaces ---------- `Mirroring` module (manager plugin) provides interfaces for managing directory snapshot mirroring. Manager interfaces are (mostly) wrappers around monitor commands for managing filesystem mirroring and is the recommended control interface. See `Internal Interfaces` (monitor commands) are detailed below. .. note:: `Mirroring` module is work in progress and the interface is detailed in the `Mirroring Module and Interface` section. Internal Interfaces ------------------- Mirroring needs be enabled for a Ceph filesystem for `cephfs-mirror` daemons to start mirroring directory snapshots:: $ ceph fs mirror enable Once mirroring is enabled, mirror peers can be added. `cephfs-mirror` daemon mirrors directory snapshots to mirror peers. A mirror peer is represented as a client name and cluster name tuple. To add a mirror peer:: $ ceph fs mirror peer_add Each peer is assigned a unique identifier which can be fetched via `ceph fs dump` or `ceph fs get` commands as below:: $ ceph fs get ... ... [peers={uuid=e3739ebf-dbce-460a-bf9c-c66b57697c9a, remote_cluster={client_name=client.site-a, cluster_name=site-a, fs_name=backup}}] To remove a mirror peer use the following:: $ ceph fs mirror peer_remove Mirroring can be disabled for a Ceph filesystem with:: $ ceph fs mirror disable Mirror status (enabled/disabled) and filesystem mirror peers are persisted in `FSMap`. This enables any entity in a Ceph cluster to subscribe to `FSMap` updates and get notified about changes in mirror status and/or peers. `cephfs-mirror` daemon subscribes to `FSMap` and gets notified on mirror status and/or peer updates. Peer changes are handled by starting or stopping mirroring to when a new peer is added or an existing peer is removed. Mirroring Module and Interface ------------------------------ Mirroring module provides interface for managing directory snapshot mirroring. The module is implemented as a Ceph Manager plugin. Mirroring module does not manage spawning (and terminating) the mirror daemons. Right now the preferred way would be to start/stop mirror daemons via `systemctl(1)`. Going forward, deploying mirror daemons would be managed by `cephadm` (Tracker: http://tracker.ceph.com/issues/47261). The manager module is responsible for assigning directories to mirror daemons for synchronization. Multiple mirror daemons can be spawned to achieve concurrency in directory snapshot synchronization. When mirror daemons are spawned (or terminated) , the mirroring module discovers the modified set of mirror daemons and rebalances the directory assignment amongst the new set thus providing high-availability. .. note:: Multiple mirror daemons is currently untested. Only a single mirror daemon is recommended. Mirroring module is disabled by default. To enable mirroring use:: $ ceph mgr module enable mirroring Mirroring module provides a family of commands to control mirroring of directory snapshots. To add or remove directories, mirroring needs to be enabled for a given filesystem. To enable mirroring use:: $ ceph fs snapshot mirror enable .. note:: Mirroring module commands use `fs snapshot mirror` prefix as compared to the monitor commands which `fs mirror` prefix. Make sure to use module commands. To disable mirroring, use:: $ ceph fs snapshot mirror disable Once mirroring is enabled, add a peer to which directory snapshots are to be mirrored. Peers follow `@` specification and get assigned a unique-id (UUID) when added. See `Creating Users` section on how to create Ceph users for mirroring. To add a peer use:: $ ceph fs snapshot mirror peer_add [] `` is optional, and default to `` (on the remote cluster). .. note:: Only a single peer is supported right now. To remove a peer use:: $ ceph fs snapshot mirror peer_remove .. note:: See `Mirror Daemon Status` section on how to figure out Peer UUID. To configure a directory for mirroring, use:: $ ceph fs snapshot mirror add To stop a mirroring directory snapshots use:: $ ceph fs snapshot mirror remove Only absolute directory paths are allowed. Also, paths are normalized by the mirroring module, therfore, `/a/b/../b` is equivalent to `/a/b`. Also, the directory should exist before it can be configured for mirroring:: $ ceph fs snapshot mirror add cephfs /d0/d1/d2 Error ENOENT: /d0/d1/d2 does not exist $ mkdir -p /d0/d1/d2 $ ceph fs snapshot mirror add cephfs /d0/d1/d2 {} $ ceph fs snapshot mirror add cephfs /d0/d1/../d1/d2 Error EEXIST: directory /d0/d1/d2 is already tracked Once a directory is added for mirroring, its subdirectory or ancestor directories are disallowed to be added for mirorring:: $ ceph fs snapshot mirror add cephfs /d0/d1 Error EINVAL: /d0/d1 is a ancestor of tracked path /d0/d1/d2 $ ceph fs snapshot mirror add cephfs /d0/d1/d2/d3 Error EINVAL: /d0/d1/d2/d3 is a subtree of tracked path /d0/d1/d2 Commands to check directory mapping (to mirror daemons) and directory distribution are detailed in `Mirror Daemon Status` section. Mirror Daemon Status -------------------- Mirror daemons get asynchronously notified about changes in filesystem mirroring status and/or peer updates. CephFS mirror daemons provide admin socket commands for querying mirror status. To check available commands for mirror status use:: $ ceph --admin-daemon /path/to/mirror/daemon/admin/socket help { .... .... "fs mirror status cephfs@360": "get filesystem mirror status", .... .... } Commands with `fs mirror status` prefix provide mirror status for mirror enabled filesystem. Note that `cephfs@360` is of format `filesystem-name@filesystem-id`. This format is required since mirror daemons get asynchronously notified regarding filesystem mirror status (A filesystem can be deleted and recreated with the same name). Right now, the command provides minimal information regarding mirror status:: $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror status cephfs@360 { "rados_inst": "192.168.0.5:0/1476644347", "peers": { "a2dc7784-e7a1-4723-b103-03ee8d8768f8": { "remote": { "client_name": "client.mirror_remote", "cluster_name": "site-a", "fs_name": "backup_fs" } } }, "snap_dirs": { "dir_count": 1 } } `Peers` section in the command output above shows the peer information such as unique peer-id (UUID) and specification. The peer-id is required to remove an existing peer as mentioned in the `Mirror Module and Interface` section. When mirroring is disabled, the respective `fs mirror status` command for the filesystem will not show up in command help. Mirroring module provides a couple of commands to display directory mapping and distribution information. To check which mirror daemon a directory has been mapped to use:: $ ceph fs snapshot mirror dirmap cephfs /d0/d1/d2 { "instance_id": "404148", "last_shuffled": 1601284516.10986, "state": "mapped" } .. note:: `instance_id` is the RAODS instance-id associated with a mirror daemon. This will include the RADOS instance address to help map to a mirror daemon. Other information such as `state` and `last_shuffled` are interesting when running multiple mirror daemons. When no mirror daemons are running the above command shows:: $ ceph fs snapshot mirror dirmap cephfs /d0/d1/d2 { "reason": "no mirror daemons running", "state": "stalled" } Signifying that no mirror daemons are running and mirroring is stalled. Creating Users -------------- Start by creating a user (on the primary/local cluster) for the mirror daemon. This user has restrictive capabilities on the MDS and the OSD:: $ ceph auth get-or-create client.mirror mon 'allow r' mds 'allow r' osd 'allow rw object_prefix cephfs_mirror' mgr 'allow r' Create a user for each filesystem peer (on the secondary/remote cluster). This user needs to have full capabilities on the MDS (to take snapshots) and the OSDs:: $ ceph auth get-or-create client.mirror_remote mon 'allow r' mds 'allow rwps' osd 'allow rw' mgr 'allow r' This user should be used (as part of peer specification) when adding a peer. Starting Mirror Daemon ---------------------- Right now, mirror daemons need to be spawned manually. This will be replaced by providing `systemctl(1)` command to start/stop mirror daemons. For now, use:: $ cephfs-mirror --id mirror --cluster site-a -f .. note:: User used here is `mirror` as created in the `Creating Users` section. Feature Status -------------- `cephfs-mirror` daemon is built by default (follows `WITH_CEPHFS` CMake rule). However, the feature is in development phase.