.. _cephfs-mirroring: ========================= CephFS Snapshot Mirroring ========================= CephFS supports asynchronous replication of snapshots to a remote CephFS file system via the `cephfs-mirror` tool. Snapshots are synchronized by mirroring snapshot data followed by creating a remote snapshot with the same name (for a given directory on the remote file system) as the source snapshot. Requirements ------------ The primary (local) and secondary (remote) Ceph clusters version should be Pacific or later. .. _cephfs_mirroring_creating_users: Creating Users -------------- Start by creating a Ceph user (on the primary/local cluster) for the `cephfs-mirror` daemon. This user requires write capability on the metadata pool to create RADOS objects (index objects) for watch/notify operation and read capability on the data pool(s):: $ ceph auth get-or-create client.mirror mon 'profile cephfs-mirror' mds 'allow r' osd 'allow rw tag cephfs metadata=*, allow r tag cephfs data=*' mgr 'allow r' Create a Ceph user for each file system peer (on the secondary/remote cluster). This user needs to have full capabilities on the MDS (to take snapshots) and the OSDs:: $ ceph fs authorize client.mirror_remote / rwps This user will be supplied as part of the peer specification when adding a peer. Starting Mirror Daemon ---------------------- The mirror daemon should be spawned using `systemctl(1)` unit files:: $ systemctl enable cephfs-mirror@mirror $ systemctl start cephfs-mirror@mirror `cephfs-mirror` daemon can be run in foreground using:: $ cephfs-mirror --id mirror --cluster site-a -f .. note:: The user specified here is `mirror`, the creation of which is described in the :ref:`Creating Users` section. Multiple ``cephfs-mirror`` daemons may be deployed for concurrent synchronization and high availability. Mirror daemons share the synchronization load using a simple ``M/N`` policy, where ``M`` is the number of directories and ``N`` is the number of ``cephfs-mirror`` daemons. When ``cephadm`` is used to manage a Ceph cluster, ``cephfs-mirror`` daemons can be deployed by running the following command: .. prompt:: bash $ ceph orch apply cephfs-mirror To deploy multiple mirror daemons, run a command of the following form: .. prompt:: bash $ ceph orch apply cephfs-mirror --placement= For example, to deploy 3 `cephfs-mirror` daemons on different hosts, run a command of the following form: .. prompt:: bash $ $ ceph orch apply cephfs-mirror --placement="3 host1,host2,host3" Interface --------- The `Mirroring` module (manager plugin) provides interfaces for managing directory snapshot mirroring. These are (mostly) wrappers around monitor commands for managing file system mirroring and is the recommended control interface. Mirroring Module ---------------- The mirroring module is responsible for assigning directories to mirror daemons for synchronization. Multiple mirror daemons can be spawned to achieve concurrency in directory snapshot synchronization. When mirror daemons are spawned (or terminated), the mirroring module discovers the modified set of mirror daemons and rebalances directory assignments across the new set, thus providing high-availability. .. note:: Deploying a single mirror daemon is recommended. Running multiple daemons is untested. The following file types are supported by the mirroring: - Regular files (-) - Directory files (d) - Symbolic link file (l) The other file types are ignored by the mirroring. So they won't be available on a successfully synchronized peer. The mirroring module is disabled by default. To enable the mirroring module, run the following command: .. prompt:: bash $ ceph mgr module enable mirroring The mirroring module provides a family of commands that can be used to control the mirroring of directory snapshots. To add or remove directories, mirroring must be enabled for a given file system. To enable mirroring for a given file system, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror enable .. note:: "Mirroring module" commands are prefixed with ``fs snapshot mirror``. This distinguishes them from "monitor commands", which are prefixed with ``fs mirror``. Be sure (in this context) to use module commands. To disable mirroring for a given file system, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror disable After mirroring is enabled, add a peer to which directory snapshots are to be mirrored. Peers are specified by the ``@`` format, which is referred to elsewhere in this document as the ``remote_cluster_spec``. Peers are assigned a unique-id (UUID) when added. See the :ref:`Creating Users` section for instructions that describe how to create Ceph users for mirroring. To add a peer, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror peer_add [] [] [] ```` is of the format ``client.@``. ```` is optional, and defaults to `` (on the remote cluster). For this command to succeed, the remote cluster's Ceph configuration and user keyring must be available in the primary cluster. For example, if a user named ``client_mirror`` is created on the remote cluster which has ``rwps`` permissions for the remote file system named ``remote_fs`` (see `Creating Users`) and the remote cluster is named ``remote_ceph`` (that is, the remote cluster configuration file is named ``remote_ceph.conf`` on the primary cluster), run the following command to add the remote filesystem as a peer to the primary filesystem ``primary_fs``: .. prompt:: bash $ ceph fs snapshot mirror peer_add primary_fs client.mirror_remote@remote_ceph remote_fs To avoid having to maintain the remote cluster configuration file and remote ceph user keyring in the primary cluster, users can bootstrap a peer (which stores the relevant remote cluster details in the monitor config store on the primary cluster). See the :ref:`Bootstrap Peers` section. The ``peer_add`` command supports passing the remote cluster monitor address and the user key. However, bootstrapping a peer is the recommended way to add a peer. .. note:: Only a single peer is currently supported. To remove a peer, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror peer_remove To list file system mirror peers, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror peer_list To configure a directory for mirroring, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror add To list the configured directories, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror ls To stop mirroring directory snapshots, run a command of the following form: .. prompt:: bash $ ceph fs snapshot mirror remove Only absolute directory paths are allowed. Paths are normalized by the mirroring module. This means that ``/a/b/../b`` is equivalent to ``/a/b``. Paths always start from the CephFS file-system root and not from the host system mount point. For example:: $ mkdir -p /d0/d1/d2 $ ceph fs snapshot mirror add cephfs /d0/d1/d2 {} $ ceph fs snapshot mirror add cephfs /d0/d1/../d1/d2 Error EEXIST: directory /d0/d1/d2 is already tracked After a directory is added for mirroring, the additional mirroring of subdirectories or ancestor directories is disallowed:: $ ceph fs snapshot mirror add cephfs /d0/d1 Error EINVAL: /d0/d1 is a ancestor of tracked path /d0/d1/d2 $ ceph fs snapshot mirror add cephfs /d0/d1/d2/d3 Error EINVAL: /d0/d1/d2/d3 is a subtree of tracked path /d0/d1/d2 The :ref:`Mirroring Status` section contains information about the commands for checking the directory mapping (to mirror daemons) and for checking the directory distribution. .. _cephfs_mirroring_bootstrap_peers: Bootstrap Peers --------------- Adding a peer (via `peer_add`) requires the peer cluster configuration and user keyring to be available in the primary cluster (manager host and hosts running the mirror daemon). This can be avoided by bootstrapping and importing a peer token. Peer bootstrap involves creating a bootstrap token on the peer cluster via:: $ ceph fs snapshot mirror peer_bootstrap create e.g.:: $ ceph fs snapshot mirror peer_bootstrap create backup_fs client.mirror_remote site-remote {"token": "eyJmc2lkIjogIjBkZjE3MjE3LWRmY2QtNDAzMC05MDc5LTM2Nzk4NTVkNDJlZiIsICJmaWxlc3lzdGVtIjogImJhY2t1cF9mcyIsICJ1c2VyIjogImNsaWVudC5taXJyb3JfcGVlcl9ib290c3RyYXAiLCAic2l0ZV9uYW1lIjogInNpdGUtcmVtb3RlIiwgImtleSI6ICJBUUFhcDBCZ0xtRmpOeEFBVnNyZXozai9YYUV0T2UrbUJEZlJDZz09IiwgIm1vbl9ob3N0IjogIlt2MjoxOTIuMTY4LjAuNTo0MDkxOCx2MToxOTIuMTY4LjAuNTo0MDkxOV0ifQ=="} `site-name` refers to a user-defined string to identify the remote filesystem. In context of `peer_add` interface, `site-name` is the passed in `cluster` name from `remote_cluster_spec`. Import the bootstrap token in the primary cluster via:: $ ceph fs snapshot mirror peer_bootstrap import e.g.:: $ ceph fs snapshot mirror peer_bootstrap import cephfs eyJmc2lkIjogIjBkZjE3MjE3LWRmY2QtNDAzMC05MDc5LTM2Nzk4NTVkNDJlZiIsICJmaWxlc3lzdGVtIjogImJhY2t1cF9mcyIsICJ1c2VyIjogImNsaWVudC5taXJyb3JfcGVlcl9ib290c3RyYXAiLCAic2l0ZV9uYW1lIjogInNpdGUtcmVtb3RlIiwgImtleSI6ICJBUUFhcDBCZ0xtRmpOeEFBVnNyZXozai9YYUV0T2UrbUJEZlJDZz09IiwgIm1vbl9ob3N0IjogIlt2MjoxOTIuMTY4LjAuNTo0MDkxOCx2MToxOTIuMTY4LjAuNTo0MDkxOV0ifQ== .. _cephfs_mirroring_mirroring_status: Mirroring Status ---------------- CephFS mirroring module provides `mirror daemon status` interface to check mirror daemon status:: $ ceph fs snapshot mirror daemon status [ { "daemon_id": 284167, "filesystems": [ { "filesystem_id": 1, "name": "a", "directory_count": 1, "peers": [ { "uuid": "02117353-8cd1-44db-976b-eb20609aa160", "remote": { "client_name": "client.mirror_remote", "cluster_name": "ceph", "fs_name": "backup_fs" }, "stats": { "failure_count": 1, "recovery_count": 0 } } ] } ] } ] An entry per mirror daemon instance is displayed along with information such as configured peers and basic stats. For more detailed stats, use the admin socket interface as detailed below. CephFS mirror daemons provide admin socket commands for querying mirror status. To check available commands for mirror status use:: $ ceph --admin-daemon /path/to/mirror/daemon/admin/socket help { .... .... "fs mirror status cephfs@360": "get filesystem mirror status", .... .... } Commands prefixed with`fs mirror status` provide mirror status for mirror enabled file systems. Note that `cephfs@360` is of format `filesystem-name@filesystem-id`. This format is required since mirror daemons get asynchronously notified regarding file system mirror status (A file system can be deleted and recreated with the same name). This command currently provides minimal information regarding mirror status:: $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror status cephfs@360 { "rados_inst": "192.168.0.5:0/1476644347", "peers": { "a2dc7784-e7a1-4723-b103-03ee8d8768f8": { "remote": { "client_name": "client.mirror_remote", "cluster_name": "site-a", "fs_name": "backup_fs" } } }, "snap_dirs": { "dir_count": 1 } } The `Peers` section in the command output above shows the peer information including the unique peer-id (UUID) and specification. The peer-id is required when removing an existing peer as mentioned in the `Mirror Module and Interface` section. Commands prefixed with `fs mirror peer status` provide peer synchronization status. This command is of format `filesystem-name@filesystem-id peer-uuid`:: $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror peer status cephfs@360 a2dc7784-e7a1-4723-b103-03ee8d8768f8 { "/d0": { "state": "idle", "last_synced_snap": { "id": 120, "name": "snap1", "sync_duration": 3, "sync_time_stamp": "274900.558797s", "sync_bytes": 52428800 }, "snaps_synced": 2, "snaps_deleted": 0, "snaps_renamed": 0 } } Synchronization stats including `snaps_synced`, `snaps_deleted` and `snaps_renamed` are reset on daemon restart and/or when a directory is reassigned to another mirror daemon (when multiple mirror daemons are deployed). A directory can be in one of the following states:: - `idle`: The directory is currently not being synchronized - `syncing`: The directory is currently being synchronized - `failed`: The directory has hit upper limit of consecutive failures When a directory is currently being synchronized, the mirror daemon marks it as `syncing` and `fs mirror peer status` shows the snapshot being synchronized under the `current_syncing_snap`:: $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror peer status cephfs@360 a2dc7784-e7a1-4723-b103-03ee8d8768f8 { "/d0": { "state": "syncing", "current_syncing_snap": { "id": 121, "name": "snap2" }, "last_synced_snap": { "id": 120, "name": "snap1", "sync_duration": 3, "sync_time_stamp": "274900.558797s", "sync_bytes": 52428800 }, "snaps_synced": 2, "snaps_deleted": 0, "snaps_renamed": 0 } } The mirror daemon marks it back to `idle`, when the syncing completes. When a directory experiences a configured number of consecutive synchronization failures, the mirror daemon marks it as `failed`. Synchronization for these directories is retried. By default, the number of consecutive failures before a directory is marked as failed is controlled by `cephfs_mirror_max_consecutive_failures_per_directory` configuration option (default: 10) and the retry interval for failed directories is controlled via `cephfs_mirror_retry_failed_directories_interval` configuration option (default: 60s). E.g., adding a regular file for synchronization would result in failed status:: $ ceph fs snapshot mirror add cephfs /f0 $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror peer status cephfs@360 a2dc7784-e7a1-4723-b103-03ee8d8768f8 { "/d0": { "state": "idle", "last_synced_snap": { "id": 121, "name": "snap2", "sync_duration": 5, "sync_time_stamp": "500900.600797s", "sync_bytes": 78643200 }, "snaps_synced": 3, "snaps_deleted": 0, "snaps_renamed": 0 }, "/f0": { "state": "failed", "snaps_synced": 0, "snaps_deleted": 0, "snaps_renamed": 0 } } This allows a user to add a non-existent directory for synchronization. The mirror daemon will mark such a directory as failed and retry (less frequently). When the directory is created, the mirror daemon will clear the failed state upon successful synchronization. Adding a new snapshot or a new directory manually in the .snap directory of the remote filesystem will result in failed status of the corresponding configured directory. In the remote filesystem:: $ ceph fs subvolume snapshot create cephfs subvol1 snap2 group1 or $ mkdir /d0/.snap/snap2 $ ceph --admin-daemon /var/run/ceph/cephfs-mirror.asok fs mirror peer status cephfs@360 a2dc7784-e7a1-4723-b103-03ee8d8768f8 { "/d0": { "state": "failed", "failure_reason": "snapshot 'snap2' has invalid metadata", "last_synced_snap": { "id": 120, "name": "snap1", "sync_duration": 3, "sync_time_stamp": "274900.558797s" }, "snaps_synced": 2, "snaps_deleted": 0, "snaps_renamed": 0 }, "/f0": { "state": "failed", "snaps_synced": 0, "snaps_deleted": 0, "snaps_renamed": 0 } } When the snapshot or the directory is removed from the remote filesystem, the mirror daemon will clear the failed state upon successful synchronization of the pending snapshots, if any. .. note:: Treat the remote filesystem as read-only. Nothing is inherently enforced by CephFS. But with the right mds caps, users would not be able to snapshot directories in the remote file system. When mirroring is disabled, the respective `fs mirror status` command for the file system will not show up in command help. Metrics ------- CephFS exports mirroring metrics as :ref:`Labeled Perf Counters` which will be consumed by the OCP/ODF Dashboard to provide monitoring of the Geo Replication. These metrics can be used to measure the progress of cephfs_mirror syncing and thus provide the monitoring capability. CephFS exports the following mirroring metrics, which are displayed using the ``counter dump`` command. .. list-table:: Mirror Status Metrics :widths: 25 25 75 :header-rows: 1 * - Name - Type - Description * - mirroring_peers - Gauge - The number of peers involved in mirroring * - directory_count - Gauge - The total number of directories being synchronized * - mirrored_filesystems - Gauge - The total number of filesystems which are mirrored * - mirror_enable_failures - Counter - Enable mirroring failures .. list-table:: Replication Metrics :widths: 25 25 75 :header-rows: 1 * - Name - Type - Description * - snaps_synced - Counter - The total number of snapshots successfully synchronized * - sync_bytes - Counter - The total bytes being synchronized * - sync_failures - Counter - The total number of failed snapshot synchronizations * - snaps_deleted - Counter - The total number of snapshots deleted * - snaps_renamed - Counter - The total number of snapshots renamed * - avg_sync_time - Gauge - The average time taken by all snapshot synchronizations * - last_synced_start - Gauge - The sync start time of the last synced snapshot * - last_synced_end - Gauge - The sync end time of the last synced snapshot * - last_synced_duration - Gauge - The time duration of the last synchronization * - last_synced_bytes - counter - The total bytes being synchronized for the last synced snapshot Configuration Options --------------------- .. confval:: cephfs_mirror_max_concurrent_directory_syncs .. confval:: cephfs_mirror_action_update_interval .. confval:: cephfs_mirror_restart_mirror_on_blocklist_interval .. confval:: cephfs_mirror_max_snapshot_sync_per_cycle .. confval:: cephfs_mirror_directory_scan_interval .. confval:: cephfs_mirror_max_consecutive_failures_per_directory .. confval:: cephfs_mirror_retry_failed_directories_interval .. confval:: cephfs_mirror_restart_mirror_on_failure_interval .. confval:: cephfs_mirror_mount_timeout .. confval:: cephfs_mirror_perf_stats_prio Re-adding Peers --------------- When re-adding (reassigning) a peer to a file system in another cluster, ensure that all mirror daemons have stopped synchronization to the peer. This can be checked via `fs mirror status` admin socket command (the `Peer UUID` should not show up in the command output). Also, it is recommended to purge synchronized directories from the peer before re-adding it to another file system (especially those directories which might exist in the new primary file system). This is not required if re-adding a peer to the same primary file system it was earlier synchronized from.