============= Admin Guide ============= After the Ceph Object Storage service is up and running, it can be administered with user management, access controls, quotas, and usage tracking. .. _radosgw-user-management: User Management =============== Ceph Object Storage user management refers only to users of the Ceph Object Storage service and not to the Ceph Object Gateway as a user of the Ceph Storage Cluster. Create a user, access key, and secret key to enable end users to interact with Ceph Object Gateway services. Optionally, the users can belong to `Accounts`_ for ease of management. There are two types of user: - **User:** The term "user" refers to user of the S3 interface. - **Subuser:** The term "subuser" refers to a user of the Swift interface. A subuser is associated with a user. .. ditaa:: +---------+ | Account | +----+----+ | | +---------+ +-----+ User | +----+----+ | | +-----------+ +-----+ Subuser | +-----------+ Users and subusers can be created, modified, viewed, suspended and removed. you may add a Display names and an email addresses can be added to user profiles. Keys and secrets can either be specified or generated automatically. When generating or specifying keys, remember that user IDs correspond to S3 key types and subuser IDs correspond to Swift key types. Swift keys have access levels of ``read``, ``write``, ``readwrite`` and ``full``. Create a User ------------- To create a user (S3 interface), run a command of the following form: .. prompt:: bash radosgw-admin user create --uid={username} --display-name="{display-name}" [--email={email}] For example: .. prompt:: bash radosgw-admin user create --uid=johndoe --display-name="John Doe" --email=john@example.com .. code-block:: javascript { "user_id": "johndoe", "display_name": "John Doe", "email": "john@example.com", "suspended": 0, "max_buckets": 1000, "subusers": [], "keys": [ { "user": "johndoe", "access_key": "11BS02LGFB6AL6H1ADMW", "secret_key": "vzCEkuryfn060dfee4fgQPqFrncKEIkh3ZcdOANY"}], "swift_keys": [], "caps": [], "op_mask": "read, write, delete", "default_placement": "", "placement_tags": [], "bucket_quota": { "enabled": false, "max_size_kb": -1, "max_objects": -1}, "user_quota": { "enabled": false, "max_size_kb": -1, "max_objects": -1}, "temp_url_keys": []} The creation of a user entails the creation of an ``access_key`` and a ``secret_key`` entry, which can be used with any S3 API-compatible client. .. important:: Check the key output. Sometimes ``radosgw-admin`` generates a JSON escape (``\``) character, and some clients do not know how to handle JSON escape characters. Remedies include removing the JSON escape character (``\``), encapsulating the string in quotes, regenerating the key and ensuring that it does not have a JSON escape character, or specifying the key and secret manually. Create a Subuser ---------------- To create a subuser (a user of the Swift interface) for the user, specify the user ID (``--uid={username}``), a subuser ID, and the subuser's access level: .. prompt:: bash radosgw-admin subuser create --uid={uid} --subuser={uid} --access=[ read | write | readwrite | full ] For example: .. prompt:: bash radosgw-admin subuser create --uid=johndoe --subuser=johndoe:swift --access=full .. note:: ``full`` is not the same as ``readwrite``. The ``full`` access level includes ``read`` and ``write``, but it also includes the access control policy. .. code-block:: javascript { "user_id": "johndoe", "display_name": "John Doe", "email": "john@example.com", "suspended": 0, "max_buckets": 1000, "subusers": [ { "id": "johndoe:swift", "permissions": "full-control"}], "keys": [ { "user": "johndoe", "access_key": "11BS02LGFB6AL6H1ADMW", "secret_key": "vzCEkuryfn060dfee4fgQPqFrncKEIkh3ZcdOANY"}], "swift_keys": [], "caps": [], "op_mask": "read, write, delete", "default_placement": "", "placement_tags": [], "bucket_quota": { "enabled": false, "max_size_kb": -1, "max_objects": -1}, "user_quota": { "enabled": false, "max_size_kb": -1, "max_objects": -1}, "temp_url_keys": []} Get User Info ------------- To get information about a user, specify ``user info`` and the user ID (``--uid={username}``). Use a command of the following form: .. prompt:: bash radosgw-admin user info --uid=johndoe Modify User Info ---------------- To modify information about a user, specify the user ID (``--uid={username}``) and the attributes that you want to modify. Typical modifications are made to keys and secrets, email addresses, display names, and access levels. Use a command of the following form: .. prompt:: bash radosgw-admin user modify --uid=johndoe --display-name="John E. Doe" To modify subuser values, specify ``subuser modify``, user ID and the subuser ID. Use a command of the following form: .. prompt:: bash radosgw-admin subuser modify --uid=johndoe --subuser=johndoe:swift --access=full User Suspend ------------ When a user is created, the user is enabled by default. However, it is possible to suspend user privileges and to re-enable them at a later time. To suspend a user, specify ``user suspend`` and the user ID in a command of the following form: .. prompt:: bash radosgw-admin user suspend --uid=johndoe User Enable ----------- To re-enable a suspended user, provide ``user enable`` and specify the user ID in a command of the following form: .. prompt:: bash radosgw-admin user enable --uid=johndoe .. note:: Disabling the user also disables any subusers. Remove a User ------------- When you remove a user, you also remove any subusers associated with the user. It is possible to remove a subuser without removing its associated user. This is covered in the section called :ref:`Remove a Subuser `. To remove a user and any subusers associated with it, use the ``user rm`` command and provide the user ID of the user to be removed. Use a command of the following form: .. prompt:: bash radosgw-admin user rm --uid=johndoe Options include: - **Purge Data:** The ``--purge-data`` option purges all data associated with the UID. - **Purge Keys:** The ``--purge-keys`` option purges all keys associated with the UID. .. _radosgw-admin-remove-a-subuser: Remove a Subuser ---------------- Removing a subuser removes access to the Swift interface or to S3. The user associated with the removed subuser remains in the system after the subuser's removal. To remove the subuser, use the command ``subuser rm`` and provide the subuser ID of the subuser to be removed. Use a command of the following form: .. prompt:: bash radosgw-admin subuser rm --subuser=johndoe:swift Options include: - **Purge Keys:** The ``--purge-keys`` option purges all keys associated with the UID. Add or Remove a Key -------------------- Both users and subusers require a key to access the S3 or Swift interface. To use S3, the user needs a key pair which is composed of an access key and a secret key. To use Swift, the user needs a secret key (password), which is used together with its associated user ID. You can create a key and either specify or generate the access key or secret key. You can also remove a key. Options include: - ``--key-type=`` specifies the key type. The options are: ``s3``, ``swift`` - ``--access-key=`` manually specifies an S3 access key. - ``--secret-key=`` manually specifies a S3 secret key or a Swift secret key. - ``--gen-access-key`` automatically generates a random S3 access key. - ``--gen-secret`` automatically generates a random S3 secret key or a random Swift secret key. Adding S3 keys ~~~~~~~~~~~~~~ To add a specific S3 key pair for a user, run a command of the following form: .. prompt:: bash radosgw-admin key create --uid=foo --key-type=s3 --access-key fooAccessKey --secret-key fooSecretKey .. code-block:: javascript { "user_id": "foo", "rados_uid": 0, "display_name": "foo", "email": "foo@example.com", "suspended": 0, "keys": [ { "user": "foo", "access_key": "fooAccessKey", "secret_key": "fooSecretKey"}], } .. note:: You can create multiple S3 key pairs for a user. Adding Swift secret keys ~~~~~~~~~~~~~~~~~~~~~~~~ To attach a specific Swift secret key for a subuser, run a command of the following form: .. prompt:: bash radosgw-admin key create --subuser=foo:bar --key-type=swift --secret-key barSecret .. code-block:: javascript { "user_id": "foo", "rados_uid": 0, "display_name": "foo", "email": "foo@example.com", "suspended": 0, "subusers": [ { "id": "foo:bar", "permissions": "full-control"}], "swift_keys": [ { "user": "foo:bar", "secret_key": "asfghjghghmgm"}]} .. note:: A subuser can have only one Swift secret key. Associating subusers with S3 key pairs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Subusers can also be used with S3 APIs if the subuser is associated with a S3 key pair. To associate a subuser with an S3 key pair, run a command of the following form: .. prompt:: bash radosgw-admin key create --subuser=foo:bar --key-type=s3 --access-key barAccessKey --secret-key barSecretKey .. code-block:: javascript { "user_id": "foo", "rados_uid": 0, "display_name": "foo", "email": "foo@example.com", "suspended": 0, "subusers": [ { "id": "foo:bar", "permissions": "full-control"}], "keys": [ { "user": "foo:bar", "access_key": "barAccessKey", "secret_key": "barSecretKey"}], } Removing S3 key pairs ~~~~~~~~~~~~~~~~~~~~~ To remove a S3 key pair, specify the access key to be removed. Run a command of the following form: .. prompt:: bash radosgw-admin key rm --uid=foo --key-type=s3 --access-key=fooAccessKey Removing Swift secret keys ~~~~~~~~~~~~~~~~~~~~~~~~~~ To remove a Swift secret key, run a command of the following form: .. prompt:: bash radosgw-admin key rm --subuser=foo:bar --key-type=swift Add or Remove Admin Capabilities -------------------------------- The Ceph Storage Cluster provides an administrative API that enables users to execute administrative functions via the REST API. By default, users do NOT have access to this API. To enable a user to exercise administrative functionality, provide the user with administrative capabilities. To add administrative capabilities to a user, run a command of the following form: .. prompt:: bash radosgw-admin caps add --uid={uid} --caps={caps} You can add read, write or all capabilities to users, buckets, metadata and usage (utilization). To do this, use a command-line option of the following form: .. prompt:: bash --caps="[users|buckets|metadata|usage|zone|amz-cache|info|bilog|mdlog|datalog|user-policy|oidc-provider|roles|ratelimit|user-info-without-keys]=[\*|read|write|read, write]" For example: .. prompt:: bash radosgw-admin caps add --uid=johndoe --caps="users=*;buckets=*" To remove administrative capabilities from a user, run a command of the following form: .. prompt:: bash radosgw-admin caps rm --uid=johndoe --caps={caps} Quota Management ================ The Ceph Object Gateway makes it possible for you to set quotas on users and buckets owned by users. Quotas include the maximum number of objects in a bucket and the maximum storage size a bucket can hold. - **Bucket:** The ``--bucket`` option allows you to specify a quota for buckets the user owns. - **Maximum Objects:** The ``--max-objects`` setting allows you to specify the maximum number of objects. A negative value disables this setting. - **Maximum Size:** The ``--max-size`` option allows you to specify a quota size in B/K/M/G/T, where B is the default. A negative value disables this setting. - **Quota Scope:** The ``--quota-scope`` option sets the scope for the quota. The options are ``bucket`` and ``user``. Bucket quotas apply to each bucket owned by the user. User Quotas are summed across all buckets owned by the user. Set User Quota -------------- Before you enable a quota, you must first set the quota parameters. To set quota parameters, run a command of the following form: .. prompt:: bash radosgw-admin quota set --quota-scope=user --uid= [--max-objects=] [--max-size=] For example: .. prompt:: bash radosgw-admin quota set --quota-scope=user --uid=johndoe --max-objects=1024 --max-size=1024B Passing a negative value as an argument of ``--max-objects`` or ``--max-size`` disables the given quota attribute. Enabling and Disabling User Quota --------------------------------- After a user quota is set, it must be enabled in order to take effect. To enable a user quota, run a command of the following form: .. prompt:: bash radosgw-admin quota enable --quota-scope=user --uid= To disable an enabled user quota, run a command of the following form: .. prompt:: bash radosgw-admin quota disable --quota-scope=user --uid= Set Bucket Quota ---------------- Bucket quotas apply to the buckets owned by the specified ``uid``. They are independent of the user. To set a bucket quota, run a command of the following form: .. prompt:: bash radosgw-admin quota set --uid= --quota-scope=bucket [--max-objects=] [--max-size= To disable an enabled bucket quota, run a command of the following form: .. prompt:: bash radosgw-admin quota disable --quota-scope=bucket --uid= Get Quota Settings ------------------ You can access each user's quota settings via the user information API. To read user quota setting information with the CLI interface, run a command of the following form: .. prompt:: bash radosgw-admin user info --uid= Update Quota Stats ------------------ Quota stats are updated asynchronously. You can update quota statistics for all users and all buckets manually to force an update of the latest quota stats. To update quota statistics for all users and all buckets in order to retrieve the latest quota statistics, run a command of the following form: .. prompt:: bash radosgw-admin user stats --uid= --sync-stats .. _rgw_user_usage_stats: Get User Usage Stats -------------------- To see how much of a quota a user has consumed, run a command of the following form: .. prompt:: bash radosgw-admin user stats --uid= .. note:: Run ``radosgw-admin user stats`` with the ``--sync-stats`` option to receive the latest data. Default Quotas -------------- You can set default quotas in the Ceph Object Gateway config. **These defaults will be used only when creating new users and will have no effect on existing users.** If a default quota is set in the Ceph Object Gateway Config, then that quota is set for all subsequently-created users, and that quota is enabled. See ``rgw_bucket_default_quota_max_objects``, ``rgw_bucket_default_quota_max_size``, ``rgw_user_default_quota_max_objects``, ``rgw_user_default_quota_max_size``, ``rgw_account_default_quota_max_objects``, and ``rgw_account_default_quota_max_size`` in `Ceph Object Gateway Config Reference`_. Quota Cache ----------- Quota statistics are cached by each RGW instance. If multiple RGW instances are deployed, then this cache may prevent quotas from being perfectly enforced, because each instance may have a different set of quota settings. Here are the options that control this behavior: :confval:`rgw_bucket_quota_ttl` :confval:`rgw_user_quota_bucket_sync_interval` :confval:`rgw_user_quota_sync_interval` Increasing these values will make quota operations more efficient at the cost of increasing the likelihood that the multiple RGW instances may not consistently have the latest quota settings. Decreasing these values brings the multiple RGW instances closer to perfect quota synchronization. If all three values are set to ``0`` , then quota caching is effectively disabled, and multiple instances will have perfect quota enforcement. See `Ceph Object Gateway Config Reference`_. Reading / Writing Global Quotas ------------------------------- You can read and write global quota settings in the period configuration. To view the global quota settings, run the following command: .. prompt:: bash radosgw-admin global quota get Global quota settings can be manipulated with the ``global quota`` counterparts of the ``quota set``, ``quota enable``, and ``quota disable`` commands, as in the following examples: .. prompt:: bash radosgw-admin global quota set --quota-scope bucket --max-objects 1024 radosgw-admin global quota enable --quota-scope bucket .. note:: In a multisite configuration where there is a realm and period present, changes to the global quotas must be committed using ``period update --commit``. If no period is present, the RGW instances must be restarted for the changes to take effect. Rate Limit Management ===================== Quotas can be set for The Ceph Object Gateway on users and buckets. The "rate limit" includes the maximum number of read operations (read ops) and write operations (write ops) per minute as well as the number of bytes per minute that can be written or read per user or per bucket. Read Requests and Write Requests -------------------------------- Operations that use the ``GET`` method or the ``HEAD`` method in their REST requests are "read requests". All other requests are "write requests". How Metrics Work ---------------- Each object gateway tracks per-user metrics separately from bucket metrics. These metrics are not shared with other gateways. The configured limits should be divided by the number of active object gateways. For example, if "user A" is to be be limited to 10 ops per minute and there are two object gateways in the cluster, then the limit on "user A" should be ``5`` (10 ops per minute / 2 RGWs). If the requests are **not** balanced between RGWs, the rate limit might be underutilized. For example: if the ops limit is ``5`` and there are two RGWs, **but** the Load Balancer sends load to only one of those RGWs, the effective limit is 5 ops, because this limit is enforced per RGW. If the rate limit that has been set for the bucket has been reached but the rate limit that has been set for the user has not been reached, then the request is cancelled. The contrary holds as well: if the rate limit that has been set for the user has been reached but the rate limit that has been set for the bucket has not been reached, then the request is cancelled. The accounting of bandwidth happens only after a request has been accepted. This means that requests will proceed even if the bucket rate limit or user rate limit is reached during the execution of the request. The RGW keeps track of a "debt" consisting of bytes used in excess of the configured value; users or buckets that incur this kind of debt are prevented from sending more requests until the "debt" has been repaid. The maximum size of the "debt" is twice the max-read/write-bytes per minute. If "user A" is subject to a 1-byte read limit per minute and they attempt to GET an object that is 1 GB in size, then the ``GET`` action will fail. After "user A" has completed this 1 GB operation, RGW blocks the user's requests for up to two minutes. After this time has elapsed, "user A" will be able to send ``GET`` requests again. - **Bucket:** The ``--bucket`` option allows you to specify a rate limit for a bucket. - **User:** The ``--uid`` option allows you to specify a rate limit for a user. - **Maximum Read Ops:** The ``--max-read-ops`` setting allows you to limit read bytes per minute per RGW instance. A ``0`` value disables throttling. - **Maximum Read Bytes:** The ``--max-read-bytes`` setting allows you to limit read bytes per minute per RGW instance. A ``0`` value disables throttling. - **Maximum Write Ops:** The ``--max-write-ops`` setting allows you to specify the maximum number of write ops per minute per RGW instance. A ``0`` value disables throttling. - **Maximum Write Bytes:** The ``--max-write-bytes`` setting allows you to specify the maximum number of write bytes per minute per RGW instance. A ``0`` value disables throttling. - **Rate Limit Scope:** The ``--ratelimit-scope`` option sets the scope for the rate limit. The options are ``bucket`` , ``user`` and ``anonymous``. Bucket rate limit apply to buckets. The user rate limit applies to a user. The ``anonymous`` option applies to an unauthenticated user. Anonymous scope is available only for global rate limit. Set User Rate Limit ------------------- Before you can enable a rate limit, you must first set the rate limit parameters. The following is the general form of commands that set rate limit parameters: .. prompt:: bash radosgw-admin ratelimit set --ratelimit-scope=user --uid= <[--max-read-ops=] [--max-read-bytes=] [--max-write-ops=] [--max-write-bytes=]> An example of using ``radosgw-admin ratelimit set`` to set a rate limit might look like this: .. prompt:: bash radosgw-admin ratelimit set --ratelimit-scope=user --uid=johndoe --max-read-ops=1024 --max-write-bytes=10240 A value of ``0`` assigned to ``--max-read-ops``, ``--max-read-bytes``, ``--max-write-ops``, or ``--max-write-bytes`` disables the specified rate limit. Get User Rate Limit ------------------- The ``radosgw-admin ratelimit get`` command returns the currently configured rate limit parameters. The following is the general form of the command that returns the current configured limit parameters: .. prompt:: bash radosgw-admin ratelimit get --ratelimit-scope=user --uid= An example of using ``radosgw-admin ratelimit get`` to return the rate limit parameters might look like this: .. prompt:: bash radosgw-admin ratelimit get --ratelimit-scope=user --uid=johndoe A value of ``0`` assigned to ``--max-read-ops``, ``--max-read-bytes``, ``--max-write-ops``, or ``--max-write-bytes`` disables the specified rate limit. Enable and Disable User Rate Limit ---------------------------------- After you have set a user rate limit, you must enable it in order for it to take effect. Run a command of the following form to enable a user rate limit: .. prompt:: bash radosgw-admin ratelimit enable --ratelimit-scope=user --uid= To disable an enabled user rate limit, run a command of the following form: .. prompt:: bash radosgw-admin ratelimit disable --ratelimit-scope=user --uid=johndoe Set Bucket Rate Limit --------------------- Before you enable a rate limit, you must first set the rate limit parameters. The following is the general form of commands that set rate limit parameters: .. prompt:: bash radosgw-admin ratelimit set --ratelimit-scope=bucket --bucket= <[--max-read-ops=] [--max-read-bytes=] [--max-write-ops=] [--max-write-bytes=]> An example of using ``radosgw-admin ratelimit set`` to set a rate limit for a bucket might look like this: .. prompt:: bash radosgw-admin ratelimit set --ratelimit-scope=bucket --bucket=mybucket --max-read-ops=1024 --max-write-bytes=10240 A value of ``0`` assigned to ``--max-read-ops``, ``--max-read-bytes``, ``--max-write-ops``, or ``-max-write-bytes`` disables the specified bucket rate limit. Get Bucket Rate Limit --------------------- The ``radosgw-admin ratelimit get`` command returns the current configured rate limit parameters. The following is the general form of the command that returns the current configured limit parameters: .. prompt:: bash radosgw-admin ratelimit get --ratelimit-scope=bucket --bucket= An example of using ``radosgw-admin ratelimit get`` to return the rate limit parameters for a bucket might look like this: .. prompt:: bash radosgw-admin ratelimit get --ratelimit-scope=bucket --bucket=mybucket A value of ``0`` assigned to ``--max-read-ops``, ``--max-read-bytes``, ``--max-write-ops``, or ``--max-write-bytes`` disables the specified rate limit. Enable and Disable Bucket Rate Limit ------------------------------------ After you set a bucket rate limit, you can enable it. The following is the general form of the ``radosgw-admin ratelimit enable`` command that enables bucket rate limits: .. prompt:: bash radosgw-admin ratelimit enable --ratelimit-scope=bucket --bucket= An enabled bucket rate limit can be disabled by running a command of the following form: .. prompt:: bash radosgw-admin ratelimit disable --ratelimit-scope=bucket --uid=mybucket Reading and Writing Global Rate Limit Configuration --------------------------------------------------- You can read and write global rate limit settings in the period's configuration. To view the global rate limit settings, run the following command: .. prompt:: bash radosgw-admin global ratelimit get The global rate limit settings can be manipulated with the ``global ratelimit`` counterparts of the ``ratelimit set``, ``ratelimit enable``, and ``ratelimit disable`` commands. Per-user and per-bucket ratelimit configurations override the global configuration: .. prompt:: bash radosgw-admin global ratelimit set --ratelimit-scope bucket --max-read-ops=1024 radosgw-admin global ratelimit enable --ratelimit-scope bucket The global rate limit can be used to configure the scope of the rate limit for all authenticated users: .. prompt:: bash radosgw-admin global ratelimit set --ratelimit-scope user --max-read-ops=1024 radosgw-admin global ratelimit enable --ratelimit-scope user The global rate limit can be used to configure the scope of the rate limit for all unauthenticated users: .. prompt:: bash radosgw-admin global ratelimit set --ratelimit-scope=anonymous --max-read-ops=1024 radosgw-admin global ratelimit enable --ratelimit-scope=anonymous .. note:: In a multisite configuration where a realm and a period are present, any changes to the global rate limit must be committed using ``period update --commit``. If no period is present, the rados gateway(s) must be restarted for the changes to take effect. Usage ===== The Ceph Object Gateway logs the usage of each user. You can track the usage of each user within a specified date range. - Add ``rgw_enable_usage_log = true`` in the ``[client.rgw]`` section of ``ceph.conf`` and restart the ``radosgw`` service. .. note:: Until Ceph has a linkable macro that handles all the many ways that options can be set, we advise that you set ``rgw_enable_usage_log = true`` in central config or in ``ceph.conf`` and restart all RGWs. Options include: - **Start Date:** The ``--start-date`` option allows you to filter usage stats from a specified start date and an optional start time (**format:** ``yyyy-mm-dd [HH:MM:SS]``). - **End Date:** The ``--end-date`` option allows you to filter usage up to a particular end date and an optional end time (**format:** ``yyyy-mm-dd [HH:MM:SS]``). - **Log Entries:** The ``--show-log-entries`` option allows you to specify whether to include log entries with the usage stats (options: ``true`` | ``false``). .. note:: You can specify time to a precision of minutes and seconds, but the specified time is stored only with a one-hour resolution. Show Usage ---------- To show usage statistics, use the ``radosgw-admin usage show`` command. To show usage for a particular user, you must specify a user ID. You can also specify a start date, end date, and whether to show log entries. The following is an example of such a command: .. prompt:: bash $ radosgw-admin usage show --uid=johndoe --start-date=2012-03-01 --end-date=2012-04-01 You can show a summary of usage information for all users by omitting the user ID, as in the following example command: .. prompt:: bash $ radosgw-admin usage show --show-log-entries=false Trim Usage ---------- Usage logs can consume significant storage space, especially over time and with heavy use. You can trim the usage logs for all users and for specific users. You can also specify date ranges for trim operations, as in the following example commands: .. prompt:: bash $ radosgw-admin usage trim --start-date=2010-01-01 --end-date=2010-12-31 radosgw-admin usage trim --uid=johndoe radosgw-admin usage trim --uid=johndoe --end-date=2013-12-31 .. _radosgw-admin: ../../man/8/radosgw-admin/ .. _Pool Configuration: ../../rados/configuration/pool-pg-config-ref/ .. _Ceph Object Gateway Config Reference: ../config-ref/ .. _Accounts: ../account/