======================= Logging and Debugging ======================= Typically, when you add debugging to your Ceph configuration, you do so at runtime. You can also add Ceph debug logging to your Ceph configuration file if you are encountering issues when starting your cluster. You may view Ceph log files under ``/var/log/ceph`` (the default location). .. tip:: When debug output slows down your system, the latency can hide race conditions. Logging is resource intensive. If you are encountering a problem in a specific area of your cluster, enable logging for that area of the cluster. For example, if your OSDs are running fine, but your metadata servers are not, you should start by enabling debug logging for the specific metadata server instance(s) giving you trouble. Enable logging for each subsystem as needed. .. important:: Verbose logging can generate over 1GB of data per hour. If your OS disk reaches its capacity, the node will stop working. If you enable or increase the rate of Ceph logging, ensure that you have sufficient disk space on your OS disk. See `Accelerating Log Rotation`_ for details on rotating log files. When your system is running well, remove unnecessary debugging settings to ensure your cluster runs optimally. Logging debug output messages is relatively slow, and a waste of resources when operating your cluster. See `Subsystem, Log and Debug Settings`_ for details on available settings. Runtime ======= If you would like to see the configuration settings at runtime, you must log in to a host with a running daemon and execute the following:: ceph --admin-daemon {/path/to/admin/socket} config show | less ceph --admin-daemon /var/run/ceph/ceph-osd.0.asok config show | less To activate Ceph's debugging output (*i.e.*, ``dout()``) at runtime, use the ``ceph tell`` command to inject arguments into the runtime configuration:: ceph {daemon-type} tell {daemon id or *} injectargs '--{name} {value} [--{name} {value}]' Replace ``{daemon-type}`` with one of ``osd``, ``mon`` or ``mds``. You may apply the runtime setting to all daemons of a particular type with ``*``, or specify a specific daemon's ID (i.e., its number or letter). For example, to increase debug logging for a ``ceph-osd`` daemon named ``osd.0``, execute the following:: ceph osd tell 0 injectargs '--debug_osd 0/5' The ``ceph tell`` command goes through the monitors. If you cannot bind to the monitor, you can still make the change by logging into the host of the daemon whose configuration you'd like to change using ``ceph --admin-daemon``. For example:: sudo ceph --admin-daemon /var/run/ceph/ceph-osd.0.asok config set debug_osd 0/5 See `Subsystem, Log and Debug Settings`_ for details on available settings. Boot Time ========= To activate Ceph's debugging output (*i.e.*, ``dout()``) at boot time, you must add settings to your Ceph configuration file. Subsystems common to each daemon may be set under ``[global]`` in your configuration file. Subsystems for particular daemons are set under the daemon section in your configuration file (*e.g.*, ``[mon]``, ``[osd]``, ``[mds]``). For example:: [global] debug ms = 1/5 [mon] debug mon = 20 debug paxos = 1/5 debug auth = 2 [osd] debug osd = 1/5 debug filestore = 1/5 debug journal = 1 debug monc = 5/20 [mds] debug mds = 1 debug mds balancer = 1 debug mds log = 1 debug mds migrator = 1 See `Subsystem, Log and Debug Settings`_ for details. Accelerating Log Rotation ========================= If your OS disk is relatively full, you can accelerate log rotation by modifying the Ceph log rotation file at ``/etc/logrotate.d/ceph``. Add a size setting after the rotation frequency to accelerate log rotation (via cronjob) if your logs exceed the size setting. For example, the default setting looks like this:: rotate 7 weekly compress sharedscripts Modify it by adding a ``size`` setting. :: rotate 7 weekly size 500M compress sharedscripts Then, start the crontab editor for your user space. :: crontab -e Finally, add an entry to check the ``etc/logrotate.d/ceph`` file. :: 30 * * * * /usr/sbin/logrotate /etc/logrotate.d/ceph >/dev/null 2>&1 The preceding example checks the ``etc/logrotate.d/ceph`` file every 30 minutes. Valgrind ======== Debugging may also require you to track down memory and threading issues. You can run a single daemon, a type of daemon, or the whole cluster with Valgrind. You should only use Valgrind when developing or debugging Ceph. Valgrind is computationally expensive, and will slow down your system otherwise. Valgrind messages are logged to ``stderr``. Subsystem, Log and Debug Settings ================================= In most cases, you will enable debug logging output via subsystems. Ceph Subsystems --------------- Each subsystem has a logging level for its output logs, and for its logs in-memory. You may set different values for each of these subsystems by setting a log file level and a memory level for debug logging. Ceph's logging levels operate on a scale of ``1`` to ``20``, where ``1`` is terse and ``20`` is verbose. A debug logging setting can take a single value for the log level and the memory level, which sets them both as the same value. For example, if you specify ``debug ms = 5``, Ceph will treat it as a log level and a memory level of ``5``. You may also specify them separately. The first setting is the log level, and the second setting is the memory level. You must separate them with a forward slash (/). For example, if you want to set the ``ms`` subsystem's debug logging level to ``1`` and its memory level to ``5``, you would specify it as ``debug ms = 1/5``. For example: .. code-block:: ini debug {subsystem} = {log-level}/{memory-level} #for example debug mds log = 1/20 The following table provides a list of Ceph subsystems and their default log and memory levels. Once you complete your logging efforts, restore the subsystems to their default level or to a level suitable for normal operations. +--------------------+-----------+--------------+ | Subsystem | Log Level | Memory Level | +====================+===========+==============+ | ``default`` | 0 | 5 | +--------------------+-----------+--------------+ | ``lockdep`` | 0 | 5 | +--------------------+-----------+--------------+ | ``context`` | 0 | 5 | +--------------------+-----------+--------------+ | ``crush`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds balancer`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds locker`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds log`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds log expire`` | 1 | 5 | +--------------------+-----------+--------------+ | ``mds migrator`` | 1 | 5 | +--------------------+-----------+--------------+ | ``buffer`` | 0 | 0 | +--------------------+-----------+--------------+ | ``timer`` | 0 | 5 | +--------------------+-----------+--------------+ | ``filer`` | 0 | 5 | +--------------------+-----------+--------------+ | ``objecter`` | 0 | 0 | +--------------------+-----------+--------------+ | ``rados`` | 0 | 5 | +--------------------+-----------+--------------+ | ``rbd`` | 0 | 5 | +--------------------+-----------+--------------+ | ``journaler`` | 0 | 5 | +--------------------+-----------+--------------+ | ``objectcacher`` | 0 | 5 | +--------------------+-----------+--------------+ | ``client`` | 0 | 5 | +--------------------+-----------+--------------+ | ``osd`` | 0 | 5 | +--------------------+-----------+--------------+ | ``optracker`` | 0 | 5 | +--------------------+-----------+--------------+ | ``objclass`` | 0 | 5 | +--------------------+-----------+--------------+ | ``filestore`` | 1 | 5 | +--------------------+-----------+--------------+ | ``journal`` | 1 | 5 | +--------------------+-----------+--------------+ | ``ms`` | 0 | 5 | +--------------------+-----------+--------------+ | ``mon`` | 1 | 5 | +--------------------+-----------+--------------+ | ``monc`` | 0 | 5 | +--------------------+-----------+--------------+ | ``paxos`` | 0 | 5 | +--------------------+-----------+--------------+ | ``tp`` | 0 | 5 | +--------------------+-----------+--------------+ | ``auth`` | 1 | 5 | +--------------------+-----------+--------------+ | ``finisher`` | 1 | 5 | +--------------------+-----------+--------------+ | ``heartbeatmap`` | 1 | 5 | +--------------------+-----------+--------------+ | ``perfcounter`` | 1 | 5 | +--------------------+-----------+--------------+ | ``rgw`` | 1 | 5 | +--------------------+-----------+--------------+ | ``hadoop`` | 1 | 5 | +--------------------+-----------+--------------+ | ``asok`` | 1 | 5 | +--------------------+-----------+--------------+ | ``throttle`` | 1 | 5 | +--------------------+-----------+--------------+ Logging Settings ---------------- Logging and debugging settings are not required in a Ceph configuration file, but you may override default settings as needed. Ceph supports the following settings: ``log file`` :Desription: The location of the logging file for your cluster. :Type: String :Required: No :Default: ``/var/log/ceph/$cluster-$name.log`` ``log max new`` :Description: The maximum number of new log files. :Type: Integer :Required: No :Default: ``1000`` ``log max recent`` :Description: The maximum number of recent events to include in a log file. :Type: Integer :Required: No :Default: ``1000000`` ``log to stderr`` :Description: Determines if logging messages should appear in ``stderr``. :Type: Boolean :Required: No :Default: ``true`` ``err to stderr`` :Description: Determines if error messages should appear in ``stderr``. :Type: Boolean :Required: No :Default: ``true`` ``log to syslog`` :Description: Determines if logging messages should appear in ``syslog``. :Type: Boolean :Required: No :Default: ``false`` ``err to syslog`` :Description: Determines if error messages should appear in ``syslog``. :Type: Boolean :Required: No :Default: ``false`` ``log flush on exit`` :Description: Determines if Ceph should flush the log files after exit. :Type: Boolean :Required: No :Default: ``true`` ``clog to monitors`` :Description: Determines if ``clog`` messages should be sent to monitors. :Type: Boolean :Required: No :Default: ``true`` ``clog to syslog`` :Description: Determines if ``clog`` messages should be sent to syslog. :Type: Boolean :Required: No :Default: ``false`` ``mon cluster log to syslog`` :Description: Determines if the cluster log should be output to the syslog. :Type: Boolean :Required: No :Default: ``false`` ``mon cluster log file`` :Description: The location of the cluster's log file. :Type: String :Required: No :Default: ``/var/log/ceph/$cluster.log`` OSD --- ``osd debug drop ping probability`` :Description: ? :Type: Double :Required: No :Default: 0 ``osd debug drop ping duration`` :Description: :Type: Integer :Required: No :Default: 0 ``osd debug drop pg create probability`` :Description: :Type: Integer :Required: No :Default: 0 ``osd debug drop pg create duration`` :Description: ? :Type: Double :Required: No :Default: 1 ``osd preserve trimmed log`` :Description: Preserves trimmed logs after trimming. :Type: Boolean :Required: No :Default: ``false`` ``osd tmapput sets uses tmap`` :Description: Uses ``tmap``. For debug only. :Type: Boolean :Required: No :Default: ``false`` ``osd min pg log entries`` :Description: The minimum number of log entries for placement groups. :Type: 32-bit Unsigned Integer :Required: No :Default: 1000 ``osd op log threshold`` :Description: How many op log messages to show up in one pass. :Type: Integer :Required: No :Default: 5 Filestore --------- ``filestore debug omap check`` :Description: Debugging check on synchronization. This is an expensive operation. :Type: Boolean :Required: No :Default: 0 MDS --- ``mds debug scatterstat`` :Description: Ceph will assert that various recursive stat invariants are true (for developers only). :Type: Boolean :Required: No :Default: ``false`` ``mds debug frag`` :Description: Ceph will verify directory fragmentation invariants when convenient (developers only). :Type: Boolean :Required: No :Default: ``false`` ``mds debug auth pins`` :Description: The debug auth pin invariants (for developers only). :Type: Boolean :Required: No :Default: ``false`` ``mds debug subtrees`` :Description: The debug subtree invariants (for developers only). :Type: Boolean :Required: No :Default: ``false`` RADOS Gateway ------------- ``rgw log nonexistent bucket`` :Description: Should we log a non-existent buckets? :Type: Boolean :Required: No :Default: ``false`` ``rgw log object name`` :Description: Should an object's name be logged. // man date to see codes (a subset are supported) :Type: String :Required: No :Default: ``%Y-%m-%d-%H-%i-%n`` ``rgw log object name utc`` :Description: Object log name contains UTC? :Type: Boolean :Required: No :Default: ``false`` ``rgw enable ops log`` :Description: Enables logging of every RGW operation. :Type: Boolean :Required: No :Default: ``true`` ``rgw enable usage log`` :Description: Enable logging of RGW's bandwidth usage. :Type: Boolean :Required: No :Default: ``true`` ``rgw usage log flush threshold`` :Description: Threshold to flush pending log data. :Type: Integer :Required: No :Default: ``1024`` ``rgw usage log tick interval`` :Description: Flush pending log data every ``s`` seconds. :Type: Integer :Required: No :Default: 30 ``rgw intent log object name`` :Description: :Type: String :Required: No :Default: ``%Y-%m-%d-%i-%n`` ``rgw intent log object name utc`` :Description: Include a UTC timestamp in the intent log object name. :Type: Boolean :Required: No :Default: ``false``