the 'sudo netstat | grep radosgw' command is causing failures:
File "qa/workunits/rgw/test_rgw_reshard.py", line 53, in get_radosgw_port
x = out.decode('utf8').split(" ")
AttributeError: 'bool' object has no attribute 'decode'
because when valgrind is enabled, the process name is 'valgrind' instead
of 'radosgw'
Signed-off-by: Casey Bodley <cbodley@redhat.com>
It appears that commit 6eb8f30a23 broke the test utility and
its failure was masked by the test case that expected a failure
due to a timeout force-killing the app.
Fixes: https://tracker.ceph.com/issues/49117
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
The autoscaler will start out with scaling each
pools to have a full complements of pgs from the start
and will only decrease it when pools need more due to
increased usage.
Introduced a unit test that tests only the
function get_final_pg_target_and_ratio() which
deals with the distrubtion of pgs amongst the
pools
Edited workunit script to reflect the change
of how pgs are calculated and distrubted.
Signed-off-by: Kamoltat <ksirivad@redhat.com>
* refs/pull/39028/head:
cephadm: retry for 30s instead of 10s
cephadm: try 'mgr stat' before 'mgr dump' to get the epoch
mon: add 'mgr stat' command
Reviewed-by: Sebastian Wagner <swagner@suse.com>
No reason to pull nautilus/mimic, which don't even support cephadm.
This test will mostly run in the sepia lab, so pull from there.
Signed-off-by: Sage Weil <sage@newdream.net>
Ensure that all delete phases are run so that script can be
re-run when desired.
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
Please enter the commit message for your changes. Lines starting
Also adjust some unit test files to avoid trivial failures.
Fixes missing commit after rgw_write(), as well as conditional
cleanup.
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
If the qemu-img command fails when attempting to use the QCOW (v1) format,
assume that the distro does not have support for the format enabled.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Utilize the COPIED bit within the cluster offset to quickly determine
if the corresponding cluster block has been copied.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Tweak the IO read path to now utilize the L1 table associated with
the specified snapshot id. This will cause the IO to properly read
from the specific snapshot.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
The initial implementation does not support backing files, compression,
snapshots, (deprecated) encryption, external data files, nor L2 subcluster
allocation. The former three features will be added in a future commit.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
The initial implementation does not support backing files, compression, nor
(deprecated) encryption. The former two features will be added in a future commit.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
This library is obsolete with the mgr volumes plugin since Nautilus.
The last remaining user of this library was Manila which will be using
the volumes plugin with Pacific and onwards.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Otherwise it always looks at the default data pool. For ec pools, this
may not be where the file data is.
Fixes: https://tracker.ceph.com/issues/48756
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Since we cannot mark the source image read-only when running in import-only
migration mode, we should require the user to provide a snapshot to ensure
that data cannot change while the migration is running.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Test updated to include deployment of a cluster with
cephadm-exporter active. Tests include varifying config
(token), the state of it's threads are all active and a
check that the placement pattern is for all hosts
Signed-off-by: Paul Cuzner <pcuzner@redhat.com>
bdi/stable_pages_required attribute was deprecated in 5.10 and now
always returns 0. The replacement is queue/stable_writes. (It is
also writeable, so we can simplify these test cases somewhat in the
future.)
Fixes: https://tracker.ceph.com/issues/48232
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fixes: https://tracker.ceph.com/issues/48355
Signed-off-by: Alfonso Martínez <almartin@redhat.com>
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
Pending a larger suite of tests for instant-restore image migration,
this test provides a basic sanity check for both the native and
raw image formats -- including basic snapshot tests.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
... filesystems other than 'cephfs'.
It is not required to set 'allow_new_snaps' to True to allow snapshot
to be created on a filesystem. Remove that setting.
Remove 'fs/snaps/snaptest-0.sh' that is racy when running in parallel on
an another client that mounted the same file system. Include a similar
test in qa/tasks/cephfs/test_snapshots.py
Signed-off-by: Ramana Raja <rraja@redhat.com>
For `detach` failing to find the process is fatal while unmap
will still try to send disconnect to the device.
Signed-off-by: Mykola Golub <mgolub@suse.com>
The teuthology testing for rgw-orphan-list needs to install
`s3cmd`. Switch from using dnf to yum to work on a wider variety of
platforms.
Signed-off-by: J. Eric Ivancich <ivancich@redhat.com>
The commands allow to restart a daemon without destroying the nbd
device.
Now, if the netlink is used, a dead connection timeout is set on
the nbd device setup, so the device is not immediately released
if the rbd-nbd process terminates without disconnect (unmap).
The attach command just sends terminate signal to the rbd-nbd
process. The detach command starts a new process and connects to
the existing device.
Signed-off-by: Mykola Golub <mgolub@suse.com>
The iSCSI disks report a larger optimal I/O size, which causes
ceph-volume to miscalculate the extent count. Workaround this by
reporting 0.
Fixes: https://tracker.ceph.com/issues/47742
Signed-off-by: Kiefer Chang <kiefer.chang@suse.com>
This commit adds the multiple mounts support when running the
interactive shell.
ie:
```
--mount /foo /bar:/bar:z
```
Keeping default destination `/mnt` when no destination is passed for
backward compatibility. In the above example `/foo` will be mounted in
`/mnt/foo` and `/bar` in `/bar`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Previously it still could race when unmap_device returned success
because the device was not found in `rbd-nbd list-mapped` (the nbd
device was removed) but the test failed because the process was still
found in the ps table.
Fixes: https://tracker.ceph.com/issues/47394
Signed-off-by: Mykola Golub <mgolub@suse.com>
Since cephadm is py3 based, and py2 is EOL this patch
removes the py2 test iteration from test_adoption.sh
Signed-off-by: Paul Cuzner <pcuzner@redhat.com>
Since py2 is EOL, and cephadm requires py3 anyway this
patch removes the py2 test iteration from the functional
testing suite.
Signed-off-by: Paul Cuzner <pcuzner@redhat.com>
Previously, the peer uuid variable was empty which resulted in the failure
to remove the duplicate peer.
Fixes: https://tracker.ceph.com/issues/47007
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Sometimes when teuthology machines are provisioned, the command
`hostname --fqdn` does not provide a fully qualified domain name but
instead just the hostname (e.g., smithi149 instead of
smithi149.front.sepia.ceph.com). This prevents the teuthology test for
rgw-orphan-list from running successfully [for example, the hostname
was for some reason mis-interpreted as the bucket name in the
request].
This commit checks whether the hostname derived from `hostname --fqdn`
contains any '.'s and if it does not, it will append
".front.sepia.ceph.com" to the hostname. This is a hack, but until
teuthology machines are configured appropriately it seems to be a
reasonable work-around.
Signed-off-by: J. Eric Ivancich <ivancich@redhat.com>
I haven't seen it be an issue, but I'm worried a slight different in ping
report timing might result in flapping leaders even with the new
ignore-out-of-quorum code.
Imagine DCs A, B, C where A and B are netsplit: C might first elect A, then
get a propose from B immediately following a successful ping reply that gives
it a better score than A and thus gets an election win; then A could do
the same, etc.
In a default 12-hour halflife, 2-second ping config, the most a single ping
can change the score is by 0.00002314814. Therefore a code default of .0001
and a config default of .0005 should be plenty of room to prevent that in
sane monitor configurations, while still responding quickly if connections are
restored.
Plus of course this only applies to out-of-quorum monitors to peons, so if
a monitor manages to contact the leader they will be allowed to join
instantly.
Signed-off-by: Greg Farnum <gfarnum@redhat.com>
