The mgrmap may change when the mons upgrade, causing the mgr daemons to
respawn. Restart mgr daemons before mons to avoid a mismatch between
the running version and the ondisk binary.
Signed-off-by: Sage Weil <sage@redhat.com>
The mgrmap may change when the mons upgrade, causing the mgr daemons to
respawn. Delay the upgrade until later so that the ondisk binary does
not change out from underneath them.
Signed-off-by: Sage Weil <sage@redhat.com>
- start with msgr2 enabled (defaults)
- run nautilus branch for workunits
- drop msgr2 enable step at teh end
- add octopus placeholder (although it is empty for now)
Signed-off-by: Sage Weil <sage@redhat.com>
in this change,
* suites/rados/upgrade: luminous-x-singleton => mimic-x-singleton
* suites/upgrade: luminous-x => nautilus-x
we support upgrade from n to n+2 release. otherwise monitor refuses to
do so:
mon.a@-1(probing) e1 current monmap has min_mon_release 15 (luminous)
which is >2 releases older than me 15 (octopus), stopping.
Fixes: https://tracker.ceph.com/issues/38845
Signed-off-by: Kefu Chai <kchai@redhat.com>
The stress-split thrasher already had this off, but the ec variant did
not. We don't support ceph-objectstore-tool exports/imports between major
versions.
Fixes: http://tracker.ceph.com/issues/38294
Signed-off-by: Sage Weil <sage@redhat.com>
We rename ceph_test_rados_api_tier to add _pp, so the mimic version doesn't
work. And in any case, at this stage the client host has master installed.
Signed-off-by: Sage Weil <sage@redhat.com>
Otherwise it's annoying because the class list changes between luminous and nautilus,
and we don't want to futz around with changing this setting during the upgrade.
The problematic classes are 'cas' (added) and 'sdk' (not enabled by default but
included by the cls/ workunit.
Signed-off-by: Sage Weil <sage@redhat.com>
The luminous version is (1) not what we want and (2) will fail because
ceph_test_rados_api_tier no longer exists in master.
Signed-off-by: Sage Weil <sage@redhat.com>
- if force-branch, use that
- otherwise:
- read default-branch from client config
- use suite branch or ceph branch if suite branch is not defined
- if this branch is one of official releases (or master), prefix
it with 'ceph-'
try to clone branch specified above, if failed (branch doesn't exist probably)
and not force-branch, use default-branch.
Also add an option to override ragweed repo.
Switched all force-branch from ragweed qa suite to default-branch.
Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
* refs/pull/25009/head:
librbd: stringify locker name with get_legacy_str()
osdc/Objecter: fix list_watchers addr rendering to match legacy
test/crimson: disable unittest_seastar_messenger test
msg/msg_types: encode entity_addr_t TYPE_ANY as TYPE_LEGACY for pre-nautilus
client: make blacklist detection handle TYPE_ANY entries
mon/OSDMonitor: maintain compat output for 'blacklist ls'
client: maintain compat for {inst,addr}_str in status dump
qa/tasks/ceph_manager: compare osd flush seq #'s as ints
qa/suites/fs: make use of simple.yaml where appropriate
qa/msgr: move msgr factet into generic re-usable dir
crimson: fix monmap build for seastar
doc/start/ceph.conf: trim the sample ceph.conf file
doc/rados/operations: only describe --public-{addr,network} method for adding mons
PendingReleaseNotes: deprecate 'mon addr'
doc: fix some 'mon addr' references
doc/rados/configuration: fix some 'mon addr' references
doc/rados/configuration/network-config-ref: revise network docs somewhat
doc/rados/configuration/network-config-ref: remove totally obsolete section
qa/suites/rados: replace mon_seesaw.py task with a small bash script
qa/suites/fs/upgrade: don't bind to v2 addrs
qa/tasks/mon_thrash: avoid 'mon addr' in mon section
mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set
osd/OSDMap: maintain compat addr fields
msg/msg_types: add get_legacy_str()
mds/MDSMap.h: maintain compat addr field
mon/MgrMap: maintain compat active_addr field
mon/MonClient: reconnect to mon if it's addrvec appears to have changed
qa/tasks/ceph.conf.template: increase mon_mgr_mkfs_grace
msg/async/ProtocolV2: fill in IP for all peer_addrs
msg/async: print all addrs on debug lines
mon/MonMap: no noname- mon name prefix when for_mkfs
ceph-monstore-tool: print initial monmap
msg/async/ProtocolV2: advertise ourselves as a v2 addr when using v2 protocol
msg/async: assert existing protocol matches current protocol
msg/async: add missing modelines
mon/MonMap: add missing modeline
vstart.sh: put mon addrs in mon_host, not 'mon addr'
msg/async: better debug around conn map lookups and updates
mon/MonClient: dump initial monmap at debug level 10
qa/standalone/osd/osd-fast-mark-down: use v1 addr w/ simplemessenger
qa/tasks/ceph: set initial monmap features with using addrvec addrs
monmaptool: add --enable-all-features option
qa/tasks/ceph: only use monmaptool --addv if addr has [,:v]
qa/tasks/ceph_manager: make get_mon_status use mon addr
qa/tasks/ceph: keep mon addrs in ctx namespace
mon/OSDMonitor: log all osd addrs on boot
msg/simple: behave when v2 and v1 addrs are present at target
mon/MonClient: warn if global_id changes
msg/Connection: add warning/note on get_peer_global_id
mds/MDSDaemon: clean up handle_mds_map debug output a bit
qa/suites/rados/upgrade: debug mds
mds/MDSRank: improve is_stale_message to handle addrvecs
msg/async: make loopback detect when sending to one of our many addrs
qa/suites/rados/upgrade: no aggressive pg num changes
mon/OSDMonitor: require nautilus mons for require_osd_release=nautilus
mon/OSDMonitor: require mimic mons for require_osd_release=mimic
qa/suites/rados/thrash-old-clients: use legacy addr syntax in ceph.conf
msg/async: preserve peer features when replacing a connection
qa/tasks/ceph.py: move methods from teuthology.git into ceph.py directly; support mon bind * options
mon/MonMap: adjust build_initial behavior for mkfs vs probe
mon/MonMap: improve ambiguous addr behavior
qa/suites/rados/upgrade: spread mons a bit
qa/rados/thrash-old-clients: keep mons on separate hosts
qa/standalone/mon/misc.sh: tweak test to be more robust
qa/tasks/mon_seesaw: expect v1/v2 prefix in addr
osd/OSDMap: fix is_blacklisted() check to assume type ANY
mon/OSDMonitor: use ANY addr type for blacklisting
mon/msg_types: TYPE_V1ORV2 -> TYPE_ANY
qa/workunits/cephtool: fix blacklist test
qa/suites/upgrade: install old version with only v1 addrs
common/options: by default, bind to both msgr v1 and v2 addresses
vstart.sh: add --msgr1, --msgr2, --msgr21 options
msg/async/ProtocolV2: be flexible with server identity check
msg/msg_types: fix entity_addrvec_t::parse() with null end arg
qa/suites/rados/basic/msgr: no msgr2 addrs in initial monmaps
qa/tasks/ceph: add 'mon_bind_addrvec' and 'mon_bind_msgr2' options
monmaptool: add --addv argument to pass in addrvec directly
qa/suites/rados/basic/msgr: do not use msgr2 with simplemessenger
qa/suites/rados/basic/msgr: async is not experimental
messages/MOSDBoot: fix compat with pre-nautilus
mon/MonMap: allow v1 or v2 to be explicitly specified along with part
msg/msg_types: allow parsing of IPs without assuming v1 vs v2
msg/msg_types: default parse to v2 addrs
msg: standarize on v1: and v2: prefixes for *all* entity_addr_t's
vstart.sh: use msgr2 by default
mon/MonMap: remove get_addr() methods
ceph-mon: adjust startup/bind/join sequence to use addrs
mon: use MonMap::get_addrs() (instead of get_addr())
mon/MonClient: change pending_cons to addrvec-based map
mon/MonMap: fix set_addr() caller, kill wrapper
mon/MonMap: remove addr-based add()
monmaptool: fix --add to do either legacy or msgr2+legacy
monmaptool: clean up iterator use a bit
mon/MonMap: handle ambiguous mon addrs by trying both legacy and msgr
mon/MonMap: take addrvec for set_initial_members
mon/MonMap: use addrvecs for test instances
mon: pass addrvec via MMonJoin
mon/MonmapMonitor: fix 'mon add' to populate addrvec
mon/MonMap: addr -> addrvec
msg/async/ProtocolV2: only update socket_addr if we learned our addr
osd: go active even if mon only accepted our v1 addr
test/msgr: add test for msgr2 protocol
msg/async/ProtocolV2: share socket_addr and all addrs during handshake
msg/async: print socket_addr for the connection
msg/async: msgr2 protocol placeholder
msg/async: move ProtocolV1 class to its own source file
msg/async: keep listen addr in ServerSocket, pass to new connections
msg/async/AsyncMessenger: fix set_addr_unknowns
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
The following fragment was required for rhel on ovh
overrides:
ansible.cephlab:
skip_tags: entitlements,packages,repos
Since, this suite runs on smithi in our nightlies, we should not need
this.
Signed-off-by: Neha Ojha <nojha@redhat.com>
we use the playbook of "testnodes.yml" defined by ceph-cm-ansible for
initializing test nodes, and the role of "testnode" is used by
testnodes.yml. "testnode" requires "qemu-system-x86" or "qemu-kvm"
package to be installed. the qemu in turn depends on librbd1 and
librados2.
before librados3 was introduced, this worked perfectly. because in ceph
repo, qa/packages/packages.yaml defines the default set of packages the
"install" tasks should install. and in that yaml file, librados2 was
listed. so the package management system will overwrite the librados2
installed by ansible playbook with the version specified by the
"install" task, as apt/yum thinks this is what user requires explicitly,
so it's fine to install a different version of librados2.
after librados3 was introduced, librados2 was removed from
qa/packages/packages.yaml. because, by default, we need to install
librados3 instead of librados2 for ready a nautilus cluster. but the
problem is, the packge list also applies to "install" tasks installing
releases before nautilus, where we still need to replace the librados2
installed by ansible.
so, to address this issue, "librados2" is added to "extra_packages" of
the "install" tasks of tests installing old releases to install
librados2 explicitly instead of as a dependency of other ceph packages
like librbd1.
Signed-off-by: Kefu Chai <kchai@redhat.com>
Drop unused suites, which ATM means all of them except upgrade/luminous-x
which recently got a cleanup in https://github.com/ceph/ceph/pull/23162
Signed-off-by: Nathan Cutler <ncutler@suse.com>
