Because the gitbuilder build environment does not read the build depends
from the packages and needs to be updated independantly.
Signed-off-by: Loic Dachary <loic@dachary.org>
make check runs vstart.sh to setup a cluster from source and it misses
the python-argparse library as well as uuidgen otherwise it will fail
with:
./vstart.sh: 460: uuidgen: not found
...
Error: Import No module named argparse
Signed-off-by: Loic Dachary <loic@dachary.org>
Currently the way 'rbd unmap' translates a user-provided block device
into an rbd id is it matches the major number of the specified device
against /sys/bus/rbd/devices/<id>/major for each rbd mapping and
declares success on the first match. This works for both entire disks
and partitions, because under the current device number allocation
scheme, each mapping means a new major number.
In preparation for support for single-major device number allocation
scheme, which would require matching both major and minor numbers, make
sure to always match against entire disk device numbers, by converting
the specified device major:minor pair into wholdedisk major:minor pair.
To achive that, use the libblkid library, which accomplishes this goal
by walking stable sysfs structures.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Run parse_json_funcsigs against the builtin commands found
in mon/MonCommands.h. Although it does not provide for a full
validation, it will detect some degenerate cases.
It is expected to raise if a space is missing at the end of an option
specification ( see https://github.com/ceph/ceph/pull/585 ) and this
case is tested. New tests of the same kind can be added whenever an
undetected error is found. Ideally a validation function is implemented
and it would be updated ( with an associated test ) when a new
pathological case is found.
The json string given to parse_json_funcsigs is obtained from
the support program get_command_descriptions.
The python-nose dependencies are added to the build requirements in
debian/control and ceph.spec.in because make check should always be run
at built time.
http://tracker.ceph.com/issues/6274 refs #6274
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Joao Eduardo Luis <joao.luis@inktank.com>
Signed-off-by: Loic Dachary <loic@dachary.org>
The fuse-utils package was deprecated a while ago.
Switch the primary dependency for fuse tools to use
the preferred 'fuse' package.
Signed-off-by: James Page <james.page@ubuntu.com>
Remove ceph-legacy-cli
Include ceph in proper places to get it built/installed/packaged
Make ceph-common (deb) or ceph (rpm) pkg depend on python-ceph pkg
Signed-off-by: Dan Mick <dan.mick@inktank.com>
...indirectly via ceph-common. We get bad behavior when they diverge, I
think because of libcommon.la being linked both statically and dynamically.
Fixes: #4997
Backport: cuttlefish, bobtail
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Gary Lowell <gary.lowell@inktank.com>
Squeeze requires the cryptsetup package which has been renamed
cryptsetup-bin in later versions. Allow either package to
satisfy the dependency.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Two fixes for Centos 6.3 and other systems with udev versions
prior to 172. The disk peristant name using the GPT UUID does
not exist, so use the by_path persistent name instead for the
journal symlink.
The gpt label fields are not available for use in udev rules. Add
ceph-disk-udev wrapper script that extracts the partition
type guid from the label and calls ceph-disk-activate if it is
a ceph guid type. (Bug #4632)
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Add libboost-system-dev (bug #4725).
Add hdparm to rpm installation requirements. The hdparm
command is used to determin if write-caching is enabled on
the journal device.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
The ceph-mds.conf file moced from the ceph package to the
ceph-mds package. Add replaces/breaks statements to the
control file to handle this on upgrade.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
ceph-disk-prepare and ceph-disk-activate use the with statement,
str.format, and possibly other new features from python 2.6.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
python-ceph complains when installed to debian squeeze about the 'with'
statement. Apparently installation tries to install the python-ceph package for
python 2.5, which does not support the 'with' statement natively.
Signed-off-by: Filippos Giannakos <philipgian@grnet.gr>
Remove request for libleveldb1 version > 1.2. Every libleveldb1 package
should work, otherwise the SO name/version of the library should change.
Fixes: #3945
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Dynamically link to the leveldb installed on the system rather than
statically linking ceph copy. Remove the --with-system-leveldb config
option, and add a requirement for leveldb libraries for rpm and debian
packages. Bug 3945.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Change the filter in logrotate to use sed instead of perl, and remove the
package dependency on perl.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
There was already a dependency on python in the debian control file,
a similar dependency was added to the rpm spec file. perl is needed
for the logrotate script, so a dependecy was on perl wass added to
both. Bug 3768.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
The ceph test programs that are now being built by default require the junit
and libboost-program-options packages. These have been added to the build
dependecies in the debian control file.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Creates libceph1-java package that contains
the libcephfs Java wrappers .jar file and the
JNI library.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Previously, ceph-disk-* would only let you use a journal that was a
file inside the OSD data directory. With this, you can do:
ceph-disk-prepare /dev/sdb /dev/sdb
to put the journal as a second partition on the same disk as the OSD
data (might save some file system overhead), or, more interestingly:
ceph-disk-prepare /dev/sdb /dev/sdc
which makes it create a new partition on /dev/sdc to use as the
journal. Size of the partition is decided by $osd_journal_size.
/dev/sdc must be a GPT-format disk. Multiple OSDs may share the same
journal disk (using separate partitions); this way, a single fast SSD
can serve as journal for multiple spinning disks.
The second use case currently requires parted, so a Recommends: for
parted has been added to Debian packaging.
Closes: #3078Closes: #3079
Signed-off-by: Tommi Virtanen <tv@inktank.com>
Ext4 as a default is a bad choice, as we don't perform enough QA with
it. To use XFS as the default for ceph-disk-prepare, we need to depend
on xfsprogs.
btrfs-tools is already recommended, so no change there. If you set
osd_fs_type=btrfs, and don't have the package installed, you'll just
get an error message.
Signed-off-by: Tommi Virtanen <tv@inktank.com>
