This doesn't integrate very well into network-config.rst, mostly because
that document is horribly out of data and I don't know where to start.
:(
Signed-off-by: Sage Weil <sage@redhat.com>
Add option desciptions for osd_recovery_priority and osd_recovery_op_priority
Fixes: https://tracker.ceph.com/issues/23999
Signed-off-by: David Zafman <dzafman@redhat.com>
ruleset is not used after merging below patch
commit f9a095deb1
crush: s/ruleset/id/ in decompiled output
Moving away from the 'ruleset' terminology.
Signed-off-by: Changcheng Liu <changcheng.liu@intel.com>
For those with multiple storage pools sharing the same devices,
I think it would make much more sense to offer per-pool
commands to bring pools with high priority, e.g., because they
are hosting data of more importance than others, back to normal
quickly.
Fixes: http://tracker.ceph.com/issues/38456
Signed-off-by: xie xingguo <xie.xingguo@zte.com.cn>
Fixed the incorrect mention of 'osd_deep_mon_scrub_interval' in health-checks.rst.
Changed it to 'osd_deep_scrub_interval'.
Fixes: https://tracker.ceph.com/issues/38310
Signed-off-by: Ashish Singh <assingh@redhat.com>
Since ceph-deploy would not support --cluster option anymore, section in this doc could be removed
Signed-off-by: Tatsuya Naganawa <tatsuyan201101@gmail.com>
Make this mon_warn code clearer since it involves 2 values
Code used mon scrub interval instead of pg scrub interval
Rename config values to include _pg_ and ratio to make it more clear
Fix scrub warniing handling use per-pool intervals when specified
Fixes: http://tracker.ceph.com/issues/37264
Signed-off-by: David Zafman <dzafman@redhat.com>
These were never implemented. They can be added back if they are
implemented and shown to help performance.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
* refs/pull/25849/head:
qa/suites/rados/upgrade: one mon per node, and enable-msgr2 at end
qa/rados/thrash-old-clients: avoid msgr2
mon: make bootstrap rank check more robust
mon: clean up probe debug output a bit
msg/async: use v1 for v1 <-> [v2,v1] peers
msg/async/AsyncMessenger: drop single-use _send_to
mon/HealthMonitor: raise MON_MSGR2_NOT_ENABLED if mons not bound to msgr2
doc/rados/operations/health-checks: document MON_* health warnings
mon/MonMapMonitor: add 'mon enable-msgr2' command
mon: respawn if rank addr changes
mon/MonMap: calc_addr_mons() after setting rank addrvec
Reviewed-by: Ricardo Dias <rdias@suse.com>
If the ms_bind_msgr2 option is enabled, and all mons are nautilus,
raise a health alert if any mons aren't bound to msgr2 addresses.
Whitelist tests that mon_bind_addrvec=false or mon_bind_msgr2=false.
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/25009/head:
librbd: stringify locker name with get_legacy_str()
osdc/Objecter: fix list_watchers addr rendering to match legacy
test/crimson: disable unittest_seastar_messenger test
msg/msg_types: encode entity_addr_t TYPE_ANY as TYPE_LEGACY for pre-nautilus
client: make blacklist detection handle TYPE_ANY entries
mon/OSDMonitor: maintain compat output for 'blacklist ls'
client: maintain compat for {inst,addr}_str in status dump
qa/tasks/ceph_manager: compare osd flush seq #'s as ints
qa/suites/fs: make use of simple.yaml where appropriate
qa/msgr: move msgr factet into generic re-usable dir
crimson: fix monmap build for seastar
doc/start/ceph.conf: trim the sample ceph.conf file
doc/rados/operations: only describe --public-{addr,network} method for adding mons
PendingReleaseNotes: deprecate 'mon addr'
doc: fix some 'mon addr' references
doc/rados/configuration: fix some 'mon addr' references
doc/rados/configuration/network-config-ref: revise network docs somewhat
doc/rados/configuration/network-config-ref: remove totally obsolete section
qa/suites/rados: replace mon_seesaw.py task with a small bash script
qa/suites/fs/upgrade: don't bind to v2 addrs
qa/tasks/mon_thrash: avoid 'mon addr' in mon section
mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set
osd/OSDMap: maintain compat addr fields
msg/msg_types: add get_legacy_str()
mds/MDSMap.h: maintain compat addr field
mon/MgrMap: maintain compat active_addr field
mon/MonClient: reconnect to mon if it's addrvec appears to have changed
qa/tasks/ceph.conf.template: increase mon_mgr_mkfs_grace
msg/async/ProtocolV2: fill in IP for all peer_addrs
msg/async: print all addrs on debug lines
mon/MonMap: no noname- mon name prefix when for_mkfs
ceph-monstore-tool: print initial monmap
msg/async/ProtocolV2: advertise ourselves as a v2 addr when using v2 protocol
msg/async: assert existing protocol matches current protocol
msg/async: add missing modelines
mon/MonMap: add missing modeline
vstart.sh: put mon addrs in mon_host, not 'mon addr'
msg/async: better debug around conn map lookups and updates
mon/MonClient: dump initial monmap at debug level 10
qa/standalone/osd/osd-fast-mark-down: use v1 addr w/ simplemessenger
qa/tasks/ceph: set initial monmap features with using addrvec addrs
monmaptool: add --enable-all-features option
qa/tasks/ceph: only use monmaptool --addv if addr has [,:v]
qa/tasks/ceph_manager: make get_mon_status use mon addr
qa/tasks/ceph: keep mon addrs in ctx namespace
mon/OSDMonitor: log all osd addrs on boot
msg/simple: behave when v2 and v1 addrs are present at target
mon/MonClient: warn if global_id changes
msg/Connection: add warning/note on get_peer_global_id
mds/MDSDaemon: clean up handle_mds_map debug output a bit
qa/suites/rados/upgrade: debug mds
mds/MDSRank: improve is_stale_message to handle addrvecs
msg/async: make loopback detect when sending to one of our many addrs
qa/suites/rados/upgrade: no aggressive pg num changes
mon/OSDMonitor: require nautilus mons for require_osd_release=nautilus
mon/OSDMonitor: require mimic mons for require_osd_release=mimic
qa/suites/rados/thrash-old-clients: use legacy addr syntax in ceph.conf
msg/async: preserve peer features when replacing a connection
qa/tasks/ceph.py: move methods from teuthology.git into ceph.py directly; support mon bind * options
mon/MonMap: adjust build_initial behavior for mkfs vs probe
mon/MonMap: improve ambiguous addr behavior
qa/suites/rados/upgrade: spread mons a bit
qa/rados/thrash-old-clients: keep mons on separate hosts
qa/standalone/mon/misc.sh: tweak test to be more robust
qa/tasks/mon_seesaw: expect v1/v2 prefix in addr
osd/OSDMap: fix is_blacklisted() check to assume type ANY
mon/OSDMonitor: use ANY addr type for blacklisting
mon/msg_types: TYPE_V1ORV2 -> TYPE_ANY
qa/workunits/cephtool: fix blacklist test
qa/suites/upgrade: install old version with only v1 addrs
common/options: by default, bind to both msgr v1 and v2 addresses
vstart.sh: add --msgr1, --msgr2, --msgr21 options
msg/async/ProtocolV2: be flexible with server identity check
msg/msg_types: fix entity_addrvec_t::parse() with null end arg
qa/suites/rados/basic/msgr: no msgr2 addrs in initial monmaps
qa/tasks/ceph: add 'mon_bind_addrvec' and 'mon_bind_msgr2' options
monmaptool: add --addv argument to pass in addrvec directly
qa/suites/rados/basic/msgr: do not use msgr2 with simplemessenger
qa/suites/rados/basic/msgr: async is not experimental
messages/MOSDBoot: fix compat with pre-nautilus
mon/MonMap: allow v1 or v2 to be explicitly specified along with part
msg/msg_types: allow parsing of IPs without assuming v1 vs v2
msg/msg_types: default parse to v2 addrs
msg: standarize on v1: and v2: prefixes for *all* entity_addr_t's
vstart.sh: use msgr2 by default
mon/MonMap: remove get_addr() methods
ceph-mon: adjust startup/bind/join sequence to use addrs
mon: use MonMap::get_addrs() (instead of get_addr())
mon/MonClient: change pending_cons to addrvec-based map
mon/MonMap: fix set_addr() caller, kill wrapper
mon/MonMap: remove addr-based add()
monmaptool: fix --add to do either legacy or msgr2+legacy
monmaptool: clean up iterator use a bit
mon/MonMap: handle ambiguous mon addrs by trying both legacy and msgr
mon/MonMap: take addrvec for set_initial_members
mon/MonMap: use addrvecs for test instances
mon: pass addrvec via MMonJoin
mon/MonmapMonitor: fix 'mon add' to populate addrvec
mon/MonMap: addr -> addrvec
msg/async/ProtocolV2: only update socket_addr if we learned our addr
osd: go active even if mon only accepted our v1 addr
test/msgr: add test for msgr2 protocol
msg/async/ProtocolV2: share socket_addr and all addrs during handshake
msg/async: print socket_addr for the connection
msg/async: msgr2 protocol placeholder
msg/async: move ProtocolV1 class to its own source file
msg/async: keep listen addr in ServerSocket, pass to new connections
msg/async/AsyncMessenger: fix set_addr_unknowns
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
