The mgrmap may change when the mons upgrade, causing the mgr daemons to
respawn. Delay the upgrade until later so that the ondisk binary does
not change out from underneath them.
Signed-off-by: Sage Weil <sage@redhat.com>
- don't specify ceph.py options in the ceph.py
- instead, specify them in the per-version facet
Note that we don't currently have a way to do v2 only for the mon IPs, so
in the v2only cases, we are still binding the mons to v1.
Signed-off-by: Sage Weil <sage@redhat.com>
- start with msgr2 enabled (defaults)
- run nautilus branch for workunits
- drop msgr2 enable step at teh end
- add octopus placeholder (although it is empty for now)
Signed-off-by: Sage Weil <sage@redhat.com>
in this change,
* suites/rados/upgrade: luminous-x-singleton => mimic-x-singleton
* suites/upgrade: luminous-x => nautilus-x
we support upgrade from n to n+2 release. otherwise monitor refuses to
do so:
mon.a@-1(probing) e1 current monmap has min_mon_release 15 (luminous)
which is >2 releases older than me 15 (octopus), stopping.
Fixes: https://tracker.ceph.com/issues/38845
Signed-off-by: Kefu Chai <kchai@redhat.com>
There is a lot of good stuff going on here, but nobody is investing in xio
and it is not expected to be the path forward for RDMA. If that ever
changes, we can resurrect the code. Until then, let's clean up the tree
and reduce friction for changes going forward.
Signed-off-by: Sage Weil <sage@redhat.com>
Hammer doesn't have async, and nautilus doesn't have simple. Expand the
async default (v2v1) and v1-only choice and the client choice.
Signed-off-by: Sage Weil <sage@redhat.com>
The stress-split thrasher already had this off, but the ec variant did
not. We don't support ceph-objectstore-tool exports/imports between major
versions.
Fixes: http://tracker.ceph.com/issues/38294
Signed-off-by: Sage Weil <sage@redhat.com>
Valgrind makes the MDS slowwwww. The newish mds_heartbeat_grace config allows
us to keep sending beacons to the mons even if the internal heartbeat is slow.
This avoids the laggy messages which are useful to grep for unrelated messaging
issues.
Fixes: http://tracker.ceph.com/issues/38723
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Simple messenger is on it's way out and it doesn't work with msgr2.
Fixes: http://tracker.ceph.com/issues/38676
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
We've disabled the "clean" shutdown in ceph-mgr due to
https://tracker.ceph.com/issues/38621
Until then, no valgrind leak checks!
Signed-off-by: Sage Weil <sage@redhat.com>
We rename ceph_test_rados_api_tier to add _pp, so the mimic version doesn't
work. And in any case, at this stage the client host has master installed.
Signed-off-by: Sage Weil <sage@redhat.com>
Instead of generating three tests, each with bluestore-bitmap.yaml, it
generates four tests: one consisting of just bluestore-bitmap.yaml and
the other three without any trace of bluestore. This was introduced in
commit 711df71790 ("qa: objectstore snippets for krbd").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* refs/pull/26638/head:
doc: update documentation for standby-replay
qa: update discontinous map test to use mds freezing
mon: add freeze MDS command
qa: update testing for standby-replay
mon: add setting for fs to enable standby-replay
ceph-mds: obsolete hot-standby option
fs: obsolete standby_for config options
messages/MMDSBeacon: use inline init
mds: avoid unnecessary copy of entity_addrvec_t
mds: use inline init for mds_info_t
mds: use rank from MDSMap always
mds: remove obsolete comment
qa: use SIGTERM when stopping vstart service
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Zheng Yan <zyan@redhat.com>
These have bit-rotted and no longer work. No cycles from interested parties
available to fix.
Fixes: https://tracker.ceph.com/issues/38487
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
* refs/pull/26485/head:
qa/suites/upgrade/luminous-x: force clone v1 format for final rbd python test
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
* refs/pull/24805/head:
qa/suite: add dedup test
src/tools: fix compile error (master version issue)
src/tools: add stats (fixed objects,total objects)
src/tools: make room for cdc
src/tools: make enhacned stats and interface class
src/tools: set timelimit and add signal handler to check progress
src/tools: use the slice thing and make parallel (chunk_scrub)
src/test: add max-thread test in test_dedup_tool.sh
src/tools: use the slice thing and make parallel
src/test: add chunk-scrub test in test_dedup_tool.sh
src/tools: add chunk-scrub op in dedup tool
src/cls/cas: add has_chunk op
src/test: add test_dedup_tool.sh
src/tools: initial works for dedup tool
Reviewed-by: Sage Weil <sage@redhat.com>
mgr/dashboard: Add UI to configure the telemetry mgr plugin
Reviewed-by: Ernesto Puerta <epuertat@redhat.com>
Reviewed-by: Laura Paduano <lpaduano@suse.com>
Reviewed-by: Patrick Nawracay <pnawracay@suse.com>
Reviewed-by: Tatjana Dehler <tdehler@suse.com>
Otherwise it's annoying because the class list changes between luminous and nautilus,
and we don't want to futz around with changing this setting during the upgrade.
The problematic classes are 'cas' (added) and 'sdk' (not enabled by default but
included by the cls/ workunit.
Signed-off-by: Sage Weil <sage@redhat.com>
The luminous version is (1) not what we want and (2) will fail because
ceph_test_rados_api_tier no longer exists in master.
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/26336/head:
qa/tasks/keystone.py: no need for notcmalloc in example
qa/suites/rgw/tempest/tasks/rgw_tempest: no need for notcmalloc
Reviewed-by: Alfredo Deza <adeza@redhat.com>
Reviewed-by: Yehuda Sadeh <yehuda@redhat.com>
* refs/pull/25977/head:
qa/suites: exclude new packages when installing old versions
rpm: add dependency on python-kubernetes module to ceph-mgr-rook package
rpm,deb: add rbd_support module to ceph-mgr
packaging: split ceph-mgr diskprediction and rook plugins into own packages
Reviewed-by: Tim Serong <tserong@suse.com>
Reviewed-by: Kefu Chai <kchai@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
* refs/pull/26059/head:
mon/MonClient: fix keepalive with v2 auth
msg/async/ProtocolV2: reject peer_addrs of -
msg/async/ProtocolV2: clean up feature management
mon/MonClient: set up rotating_secrets, etc before msgr ready
msg/async: let client specify preferred order of modes
msg/async/ProtocolV2: include entity_name, features in reconnect
msg/async/ProtocolV2: fix write_lock usage around AckFrame
qa/suites/rados/verify/validator/valgrind: debug refs = 5
qa/standalone/ceph-helpers: fix health_ok test
auth/AuthRegistry: only complain about disabling cephx if cephx was enabled
auth/AuthRegistry: fix locking for get_supported_methods()
auth: remove AUTH_UNKNOWN weirdness, hardcoded defaults.
msg/async/ProtocolV2: remove unused get_auth_allowed_methods
osd: set up messener auth_* before setting dispatcher (and going 'ready')
mon/AuthMonitor: request max_global_id increase from peon in tick
mon: prime MgrClient only after messengers are initialized
qa/suites/rados/workloads/rados_api_tests.yaml: debug mgrc = 20 on mon
auth: document Auth{Client,Server} interfaces
auth: future-proof AUTH_MODE_* a bit in case we need to change the encoding byte
mon/MonClient: request monmap on open instead of ping
mgr/PyModuleRegistry: add details for MGR_MODULE_{DEPENDENCY,ERROR}
crimson: fix build
mon/MonClient: finsih authenticate() only after we get monmap; fix 'tell mgr'
mon: add auth_lock to protect auth_meta manipulation
ceph-mon: set up auth before binding
mon: defer initial connection auth attempts until initial quorum is formed
mon/MonClient: make MonClientPinger an AuthCleint
ceph_test_msgr: use DummyAuth
auth/DummyAuth: dummy auth server and client for test code
mon/Monitor: fix leak of auth_handler if we error out
doc/dev/cephx: re-wordwrap
doc/dev/cephx: document nautilus change to cephx
vstart.sh: fix --msgr2 option
msg/async/ProtocolV2: use shared_ptr to manage auth_meta
auth/Auth{Client,Server}: pass auth_meta in explicitly
mon/MonClient: behave if authorizer can't be built (yet)
osd: set_auth_server on client_messenger
common/ceph_context: get_moduel_type() for seastar cct
auth: make connection_secret a std::string
auth,msg/async/ProtocolV2: negotiate connection modes
auth/AuthRegistry: refactor handling of auth_*_requred options
osd,mgr,mds: remove unused authorize registries
switch monc, daemons to use new msgr2 auth frame exchange
doc/dev/msgr2: update docs to match implementation for auth frames
auth/AuthClientHandler: add build_initial_request hook
msg/Messenger: attach auth_client and/or auth_server to each Messenger
auth: introduce AuthClient and AuthServer handlers
auth: codify AUTH_MODE_AUTHORIZER
msg/Connection: track peer_id (id portion of entity_name_t) for msgr2
auth/AuthAuthorizeHandler: add get_supported_methods()
auth/AuthAuthorizeHandler: fix args for verify_authorizer()
auth: constify bufferlist arg to AuthAuthorizer::add_challenge()
auth/cephx: share all tickets and connection_secret in initial reply
msg/async,auth: add AuthConnectionMeta to Protocol
auth/AuthClientHandler: pass in session_key, connection_secret pointers
auth/AuthServiceHandler: take session_key and connection_secret as args
auth/cephx: pass more specific type into build_session_auth_info
mon/Session: separate session creation, peer ident, and registration
mon/AuthMonitor: bump max_global_id from on_active() and tick()
mon/AuthMonitor: be more careful with max_global_id
mon: only all ms_handle_authentication() if auth method says we're done
mon/AuthMonitor: fix "finished with auth" condition check
auth: clean up AuthServiceHandler::handle_request() args
auth: clean up AuthServiceHandler::start_session()
mon/AuthMonitor: drop unused op arg to assign_global_id()
msg/async: separate TAG_AUTH_REQUEST_MORE and TAG_AUTH_REPLY_MORE
msg/async: consolidate authorizer checks
msg/async: move get_auth_allowed into ProtocolV2.cc
mon/MonClient: trivial cleanup
Reviewed-by: Greg Farnum <gfarnum@redhat.com>
Seeing some hangs when the mon is forwarding mgr commands (pg deep-scrub)
to the mgr. This is a buggy test (it should send it to the mgr directly)
but it is helpful to verify the mon forwarding behavior works.
Signed-off-by: Sage Weil <sage@redhat.com>
krbd was being tested with filestore, up until recently when the
default for osd_objectstore was changed to bluestore. This broke
rbd_simple_big.yaml because bluestore_block_size defaults to 10G.
Pick up the sepia setting of 90G from bluestore-bitmap.yaml.
Run fsx subsuite with both filestore and bluestore.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
failure_reason: '"2019-02-03 22:52:41.561332 osd.10 (osd.10) 790 : cluster [WRN] slow
request 30.154662 seconds old, received at 2019-02-03 22:52:11.406639: osd_op(client.56148.0:39092
8.9 8.70387d99 (undecoded) ondisk+retry+write+known_if_redirected e1372) currently
waiting for peered" in cluster log'
We're restarting OSDs, and may see slow requests in the process.
Signed-off-by: Sage Weil <sage@redhat.com>
Discard no longer guarantees zeroing, use BLKZEROOUT and "fallocate -z"
instead (blkdiscard(8) in xenial doesn't support -z).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
As with trimming, use DecayCounters to throttle the number of caps we recall,
both globally and per-session.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
osd: Deny reservation if expected backfill size would put us over bac…
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Neha Ojha <nojha@redhat.com>
* refs/pull/25849/head:
qa/suites/rados/upgrade: one mon per node, and enable-msgr2 at end
qa/rados/thrash-old-clients: avoid msgr2
mon: make bootstrap rank check more robust
mon: clean up probe debug output a bit
msg/async: use v1 for v1 <-> [v2,v1] peers
msg/async/AsyncMessenger: drop single-use _send_to
mon/HealthMonitor: raise MON_MSGR2_NOT_ENABLED if mons not bound to msgr2
doc/rados/operations/health-checks: document MON_* health warnings
mon/MonMapMonitor: add 'mon enable-msgr2' command
mon: respawn if rank addr changes
mon/MonMap: calc_addr_mons() after setting rank addrvec
Reviewed-by: Ricardo Dias <rdias@suse.com>
With automatic balancing on, and if mode is set to upmap,
balancer will fail silently if min_compat_client is lower than
luminous.
You can't figure out that unless you take a closer look at the
mgr log, which is super annoying..
Signed-off-by: xie xingguo <xie.xingguo@zte.com.cn>
If the ms_bind_msgr2 option is enabled, and all mons are nautilus,
raise a health alert if any mons aren't bound to msgr2 addresses.
Whitelist tests that mon_bind_addrvec=false or mon_bind_msgr2=false.
Signed-off-by: Sage Weil <sage@redhat.com>
We used to rely on the monmap bootstrap code to magically create a valid
monmap with named mons because our old-style ceph.conf had mon_addr
values in each mon.foo section. Instead, just feed it a real monmap
from pre-destruction.
In practice, a user can manually generate this monmap, or rename the
mons after the fact with --inject-monmap, or whatever. Out of scope
for this test, so we just do the simplest thing to make the rebuild test
work.
Signed-off-by: Sage Weil <sage@redhat.com>
- if force-branch, use that
- otherwise:
- read default-branch from client config
- use suite branch or ceph branch if suite branch is not defined
- if this branch is one of official releases (or master), prefix
it with 'ceph-'
try to clone branch specified above, if failed (branch doesn't exist probably)
and not force-branch, use default-branch.
Also add an option to override ragweed repo.
Switched all force-branch from ragweed qa suite to default-branch.
Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
* refs/pull/25009/head:
librbd: stringify locker name with get_legacy_str()
osdc/Objecter: fix list_watchers addr rendering to match legacy
test/crimson: disable unittest_seastar_messenger test
msg/msg_types: encode entity_addr_t TYPE_ANY as TYPE_LEGACY for pre-nautilus
client: make blacklist detection handle TYPE_ANY entries
mon/OSDMonitor: maintain compat output for 'blacklist ls'
client: maintain compat for {inst,addr}_str in status dump
qa/tasks/ceph_manager: compare osd flush seq #'s as ints
qa/suites/fs: make use of simple.yaml where appropriate
qa/msgr: move msgr factet into generic re-usable dir
crimson: fix monmap build for seastar
doc/start/ceph.conf: trim the sample ceph.conf file
doc/rados/operations: only describe --public-{addr,network} method for adding mons
PendingReleaseNotes: deprecate 'mon addr'
doc: fix some 'mon addr' references
doc/rados/configuration: fix some 'mon addr' references
doc/rados/configuration/network-config-ref: revise network docs somewhat
doc/rados/configuration/network-config-ref: remove totally obsolete section
qa/suites/rados: replace mon_seesaw.py task with a small bash script
qa/suites/fs/upgrade: don't bind to v2 addrs
qa/tasks/mon_thrash: avoid 'mon addr' in mon section
mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set
osd/OSDMap: maintain compat addr fields
msg/msg_types: add get_legacy_str()
mds/MDSMap.h: maintain compat addr field
mon/MgrMap: maintain compat active_addr field
mon/MonClient: reconnect to mon if it's addrvec appears to have changed
qa/tasks/ceph.conf.template: increase mon_mgr_mkfs_grace
msg/async/ProtocolV2: fill in IP for all peer_addrs
msg/async: print all addrs on debug lines
mon/MonMap: no noname- mon name prefix when for_mkfs
ceph-monstore-tool: print initial monmap
msg/async/ProtocolV2: advertise ourselves as a v2 addr when using v2 protocol
msg/async: assert existing protocol matches current protocol
msg/async: add missing modelines
mon/MonMap: add missing modeline
vstart.sh: put mon addrs in mon_host, not 'mon addr'
msg/async: better debug around conn map lookups and updates
mon/MonClient: dump initial monmap at debug level 10
qa/standalone/osd/osd-fast-mark-down: use v1 addr w/ simplemessenger
qa/tasks/ceph: set initial monmap features with using addrvec addrs
monmaptool: add --enable-all-features option
qa/tasks/ceph: only use monmaptool --addv if addr has [,:v]
qa/tasks/ceph_manager: make get_mon_status use mon addr
qa/tasks/ceph: keep mon addrs in ctx namespace
mon/OSDMonitor: log all osd addrs on boot
msg/simple: behave when v2 and v1 addrs are present at target
mon/MonClient: warn if global_id changes
msg/Connection: add warning/note on get_peer_global_id
mds/MDSDaemon: clean up handle_mds_map debug output a bit
qa/suites/rados/upgrade: debug mds
mds/MDSRank: improve is_stale_message to handle addrvecs
msg/async: make loopback detect when sending to one of our many addrs
qa/suites/rados/upgrade: no aggressive pg num changes
mon/OSDMonitor: require nautilus mons for require_osd_release=nautilus
mon/OSDMonitor: require mimic mons for require_osd_release=mimic
qa/suites/rados/thrash-old-clients: use legacy addr syntax in ceph.conf
msg/async: preserve peer features when replacing a connection
qa/tasks/ceph.py: move methods from teuthology.git into ceph.py directly; support mon bind * options
mon/MonMap: adjust build_initial behavior for mkfs vs probe
mon/MonMap: improve ambiguous addr behavior
qa/suites/rados/upgrade: spread mons a bit
qa/rados/thrash-old-clients: keep mons on separate hosts
qa/standalone/mon/misc.sh: tweak test to be more robust
qa/tasks/mon_seesaw: expect v1/v2 prefix in addr
osd/OSDMap: fix is_blacklisted() check to assume type ANY
mon/OSDMonitor: use ANY addr type for blacklisting
mon/msg_types: TYPE_V1ORV2 -> TYPE_ANY
qa/workunits/cephtool: fix blacklist test
qa/suites/upgrade: install old version with only v1 addrs
common/options: by default, bind to both msgr v1 and v2 addresses
vstart.sh: add --msgr1, --msgr2, --msgr21 options
msg/async/ProtocolV2: be flexible with server identity check
msg/msg_types: fix entity_addrvec_t::parse() with null end arg
qa/suites/rados/basic/msgr: no msgr2 addrs in initial monmaps
qa/tasks/ceph: add 'mon_bind_addrvec' and 'mon_bind_msgr2' options
monmaptool: add --addv argument to pass in addrvec directly
qa/suites/rados/basic/msgr: do not use msgr2 with simplemessenger
qa/suites/rados/basic/msgr: async is not experimental
messages/MOSDBoot: fix compat with pre-nautilus
mon/MonMap: allow v1 or v2 to be explicitly specified along with part
msg/msg_types: allow parsing of IPs without assuming v1 vs v2
msg/msg_types: default parse to v2 addrs
msg: standarize on v1: and v2: prefixes for *all* entity_addr_t's
vstart.sh: use msgr2 by default
mon/MonMap: remove get_addr() methods
ceph-mon: adjust startup/bind/join sequence to use addrs
mon: use MonMap::get_addrs() (instead of get_addr())
mon/MonClient: change pending_cons to addrvec-based map
mon/MonMap: fix set_addr() caller, kill wrapper
mon/MonMap: remove addr-based add()
monmaptool: fix --add to do either legacy or msgr2+legacy
monmaptool: clean up iterator use a bit
mon/MonMap: handle ambiguous mon addrs by trying both legacy and msgr
mon/MonMap: take addrvec for set_initial_members
mon/MonMap: use addrvecs for test instances
mon: pass addrvec via MMonJoin
mon/MonmapMonitor: fix 'mon add' to populate addrvec
mon/MonMap: addr -> addrvec
msg/async/ProtocolV2: only update socket_addr if we learned our addr
osd: go active even if mon only accepted our v1 addr
test/msgr: add test for msgr2 protocol
msg/async/ProtocolV2: share socket_addr and all addrs during handshake
msg/async: print socket_addr for the connection
msg/async: msgr2 protocol placeholder
msg/async: move ProtocolV1 class to its own source file
msg/async: keep listen addr in ServerSocket, pass to new connections
msg/async/AsyncMessenger: fix set_addr_unknowns
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
The following fragment was required for rhel on ovh
overrides:
ansible.cephlab:
skip_tags: entitlements,packages,repos
Since, this suite runs on smithi in our nightlies, we should not need
this.
Signed-off-by: Neha Ojha <nojha@redhat.com>
The teuthology test did not like the change to remove 'mon addr' from
ceph.conf. The standalone script is easier to test.
Note that it avoids mon names 'a', 'b', 'c' since the MonMap::build_initial
uses those.
Signed-off-by: Sage Weil <sage@redhat.com>
This ensures the mons can use default ports, ceph.conf won't have v1: or
v2: prefixes, and old clients will be happy.
Signed-off-by: Sage Weil <sage@redhat.com>
1. To be able to run the cli without an external orchestrator.
2. Run the CLI in Teuthology.
Signed-off-by: Sebastian Wagner <sebastian.wagner@suse.com>
* refs/pull/25360/head:
qa/workunits/mon/pg_autoscaler: clean up pools afterwards
qa/suites/rados/singletone/all/pg-autoscaler: whitelist health warnings
qa/tasks/ceph: wait for splits/merges before final scrub
mon/OSDMonitor: be tidy with target_size_ratio and pre-nautilus code
mgr/pg_autoscaler: simplify conditions
qa/suites/rados: add simple pg-autoscaler test
qa/workunits/cephtool/test.sh: pg_autoscale_mode=off while testing pg_num etc
doc/rados/operations: document autoscaler and its health warnings
mgr/pg_autoscaler: add pg autoscaler module
pybind/mgr/mgr_util: move format_ helpers out of status module
mon/OSDMonitor: accept optional target_size_{bytes,ratio} to 'osd pool create'
mon/OSDMonitor: remove max_split_count configurable
osd/osd_types: pool_opts_t: int -> int64_t
osd/osd_types: pool_opts: fix whitespace
osd/osd_types: pool_opts_t: make encoding feature-dependent
mgr/devicehealth: pg_num_min 1 for device_health_metrics pool
mon/OSDMonitor: accept optional pg_num_min to 'osd pool create'
mon/OSDMonitor: apply osd_pool_default_pg_autoscale_mode to new pools
pybind/mgr/mgr_module: some accessors
mon/MgrMonitor: enable progress module by default
osd/osd_types: add pool pg_autoscale_mode, pg_num_min, target_size_{bytes,ratio} properties
osdc/Objecter: revise get_latest_version locking
os/memstore: ignore OP_COLL_SET_BITS
qa: generalise REQUIRE_MEMSTORE
mgr: drop GIL in get_config
mon: add 'size' arg to `osd pool create`
mon: use pg_num_target for checks during creation
mgr: revise locking in getter paths
common/options: add `mon_target_pg_per_osd`
mgr: expose OSDMap.pool_raw_used_rate
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Neha Ojha <nojha@redhat.com>
librados2 and librbd1 are installed as a dependency of qemu-kvm.
qemu-kvm is installed by ceph-cm-ansible, see [1].
in thrash-old-clients, jewel packages are installed, but yum does
not allow downgrade unless it's required explicitly. in this change,
we downgrade librbd1 and librados2 to address this issue.
currently, the ceph packages shipped by CentOS/RHEL 7 are still an old
version of jewel. so this issue only kicks in when we try to install
hammer.
this change should address failures like
Command failed on smithi136 with status 1: '\n sudo yum -y install
rbd-fuse\n '
found in rados/thrash-old-clients tests.
---
[1]
3db1cbdc22 (diff-f2b05d775fedff6c5c6689f564b32f1c)
Fixes: http://tracker.ceph.com/issues/37618
Signed-off-by: Kefu Chai <kchai@redhat.com>
The current solution fails on our CI-system as some outputs can have
more values and some parameters like 'w' can vary in different
environments.
As this was only tested before in a vstart cluster environment it
worked.
Through this commit only the given attributes we know to be there,
will be tested.
Fixes: https://tracker.ceph.com/issues/37275
Signed-off-by: Stephan Müller <smueller@suse.com>
